Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Li, Q. M." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Oil-assisted flotation of fine hematite using sodium oleate or hydroxamic acids as a collector
Autorzy:
Li, H.
Liu, M.
Liu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/109749.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hematite
sodium oleate
kerosene
Batch Flotation
Octyl hydroxamic acid
Oleoyl hydroxamic acid
Opis:
Micro-flotation and batch flotation tests were carried out on fine (-20 µm) hematite to investigate the influences of non-polar oil when sodium oleate, octyl hydroxamic acid, or oleoyl hydroxamic acid was used as a collector. Both micro-flotation and batch flotation tests were performed using single hematite mineral and/or artificial mixed minerals (hematite:quartz = 1:1), and kerosene was utilized as the neutral oil. The experimental results showed that the addition of a kerosene emulsion benefited hematite recovery in the micro-flotation tests where a froth layer did not exist. In the batch flotation where a froth layer existed, kerosene behaved differently when used in conjunction with the three collectors. Kerosene helped improve the batch flotation when sodium oleate or oleoyl hydroxamic acid was used as a collector. However, it reduced concentrate weight yield, grade and recovery to a noticeable extent when octyl hydroxamic acid was used as a collector, especially at low dosages. In addition, single hematite batch flotation kinetics tests coupled with water recovery measurement were carried out to study the role of kerosene at different collector dosages. It was observed that water drainage and the resulting froth destabilization by kerosene was dominant at low collector dosages, especially in the flotation using octyl hydroxamic acid. At higher collector dosages, the water drainage and froth destabilization effect by kerosene was possibly counter-balanced by the higher hematite surface hydrophobicity and bubble surface tension gradient, which led to more stable froth layer.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 4; 1130-1145
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction and Wear Behavior of 201HT Cast Aluminum Alloy with Various Competitive Material
Autorzy:
Li, R.
Chen, L. J.
Su, M.
Zeng, Q.
Li, H.
Liu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/382627.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
casting
aluminum alloy
friction and wear
competitive material
odlewanie
stop aluminium
tarcie i zużycie
materiał konkurencyjny
Opis:
The friction and wear properties of 201HT aluminum alloys and the corresponding competitive coupons were tested on an electro-hydraulic servo face friction and wear testing machine (MM-U10G). The microstructures of the competitive coupons were investigated by scanning electron microscopy (SEM) and consequently the corresponding friction and wear mechanisms were studied. The results demonstrated that: (1) the best competitive material of friction and wear performance of the 201HT was the 201HTC. (2) the 201HTC modified by carbon following the initial mill for oil storage of the micro-groove to be produced, increased the corresponding lubrication performance reduced the friction coefficient and wear rate effectively. (3) the 201HT-201HTC could obtain both better friction and wear mainly due to the initial process of grinding following the 201HT plastic deformation occurred in the surface and the formation of a series of re-melting welding points, whereas the 201HT material hardness would be similar to the 201HTC material hardness, which led into the competitive material friction and wear performance improvement.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 55-62
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermally induced damage in hexanitrohexaazaisowurtzitane
Autorzy:
Tian, Q.
Yan, G.
Sun, G.
Huang, C.
Xie, L.
Chen, B.
Huang, M.
Li, H.
Liu, X.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/358735.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
CL-20
SAXS
AFM
thermal effects
voids
Opis:
The evolution of the microstructure of hexanitrohexaazaisowurtzitane (CL-20) after a thermal stimulus plays a key role in the performance of CL-20. In the current work, microstructural variations of CL-20 caused by thermal treatment were investigated by X-ray diffraction, in situ variable-temperature optical microscopy, atom force microscopy, and small-angle X-ray scattering. A wave-like process, an abrupt volume expansion, movement, and fragmentation of CL-20 particles during phase transition were observed. After the phase transition (160 °C) the CL-20 sample acquired a very rough surface with numerous dimple depressions, and during the thermal decomposition stage (200 °C) a large number of voids were produced in both the bulk and the surface of the CL-20.
Źródło:
Central European Journal of Energetic Materials; 2013, 10, 3; 359-369
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies