Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "heat distribution" wg kryterium: Temat


Tytuł:
Heat dissipation and temperature distribution in long interconnect lines
Autorzy:
Gnidzińska, K.
Mey, G.
Napieralski, A.
Powiązania:
https://bibliotekanauki.pl/articles/199909.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
interconnect lines
heat dissipation
delay
temperature distribution
Opis:
Thermal and time delay aspects of long interconnect lines have been investigated. To design a modern integrated circuit we need to focus on very long global interconnects in order to achieve the desired frequency and signal synchronization. The long interconnection lines introduce significant time delays and heat generation in the driver transistors. Introducing buffers helps to spread the heat production more homogenously along the line but consumes extra power and chip area. To ensure the functionality of the circuit, it is compulsory to give priority to the time delay aspect and then the optimized solution is found by making the power dissipation as homogenous as possible and consequently the temperature distribution T (relative to ambient) as low as possible. The technology used for simulations is 65 nm node. The occurring phenomena have been described in a quantitative and qualitative way.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2010, 58, 1; 119-124
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analyzing temperature changes in the ground massif with a horizontal heat exchanger in the course of the heating season
Autorzy:
Adamovsky, R.
Neuberger, P.
Sed'ova, M.
Powiązania:
https://bibliotekanauki.pl/articles/62442.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
temperature change
ground massif
horizontal heat exchanger
heating season
heat pump
ground source heat pump
heat transfer
energy potential
ground temperature
temperature distribution
Opis:
The article is devoted to temperature changes in the ground massif with the horizontal heat exchanger as an energy source for a heat pump. The article was aimed at analyzing temperature changes in the ground massif with the horizontal heat exchanger at the beginning, in the course of and at the end of the heating season. Another aim was to analyze temperature differences in the area of the horizontal exchanger and the reference lot. The heat flow utilized in the evaporator of heat pump was extracted from the ground exchanger (nominal output at the condenser was 10.5 kW). Temperatures of the ground massif with the horizontal heat exchanger were measured in its plane in depths of 0.75 m, 0.5 m and 0.25 m. The temperature inside the ground massif on the reference lot and ambient parameters were measured as well. It is obvious that the difference of energetic potentials inside the ground massif with the heat exchanger and on the reference lot is insignificant at the beginning of the heating season. During the heating season, the difference of ground massif energetic potentials increases; at the end it is constant. The difference of temperatures in horizontal planes was not significant at the beginning of the heating season; however, it gradually increased. Maximum differences were detected in the area of the heat exchanger. In higher strata, the difference between temperatures decreases. During a major part of the heating season, temperatures at pipes of the ground exchanger were negative. This fact affected amounts of heat extracted from the ground massif.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2010, 11
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formula for temperature distribution in multi-layer optical fibres for high-power fibre lasers
Autorzy:
Grábner, Martin
Peterka, Pavel
Honzátko, Pavel
Powiązania:
https://bibliotekanauki.pl/articles/2063890.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Elektryków Polskich
Tematy:
high-power fibre lasers
active optical fibres
temperature distribution
heat transfer
Opis:
High power fibre lasers need to be cooled efficiently to avoid their thermal damage. Temperature distribution in fibre should be estimated during the fibre laser design process. The steady-state heat equation in a cylindrical geometry is solved to derive a practical formula for temperature radial distribution in multi-layered optical fibres with arbitrary number of the layers. The heat source is located in one or more cylindrical domains. The validity of the analytical formula is tested by comparison with static heat transfer simulations of typical application examples including octagonal double clad fibre, air-clad fibre, fibre with nonuniform, microstructured core. The accuracy sufficient for practical use is reported even for cases with not exactly cylindrical domains.
Źródło:
Opto-Electronics Review; 2021, 29, 4; 126--132
1230-3402
Pojawia się w:
Opto-Electronics Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature changes in heat pump horizontal ground source
Autorzy:
Adamovsky, R.
Neuberger, P.
Sed'ova, M.
Powiązania:
https://bibliotekanauki.pl/articles/60337.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
temperature change
heat pump
ground massif
horizontal heat exchanger
heat potential
soil
thermal potential
heating period
ground temperature
temperature distribution
heat transfer
energy conservation
Opis:
The paper deals with assessment of thermal fields and temperature changes in ground massif with horizontal heat exchanger used as a heat source for a heat pump. Temperatures in the zone of the horizontal ground exchanger are compared with temperatures in a reference land. Changes of heat potential of the soil during the heating period are also assessed. Possibilities of recovery of thermal potential of the ground massif when utilizing vertical and horizontal exchangers are analyzed in the opening part of the paper. The results of the first verification indicated that average temperatures in the horizontal planes of the ground massif did not differ considerably with distance from the exchanger tube. Differences in average temperatures in reference and experimental lands confirmed sufficient heat potential of the ground massif even at the peak of the heating period. The differences in average temperatures reached up to 6.51 K in the end of the heating period while at the beginning of the heating period, the differences in average temperatures dropped to 1.35 K. The differences between maximum and minimum temperatures in the zone of the ground exchanger reached up to 1.9 K at the peak of the heating period and rose to 3.9 K at the beginning and end of the heating period. The first results of our measurements indicate the necessity of accumulation of thermal energy in the soil massif in the summer period like in case of the vertical exchangers.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2009, 07
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Partition of Heat in 2D Finite Element Model of a Disc Brake
Autorzy:
Grześ, P.
Powiązania:
https://bibliotekanauki.pl/articles/387286.pdf
Data publikacji:
2011
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
rozkład temperatury
hamowanie
hamulec
przewodność cieplna
partition of heat
braking
temperature distribution
Opis:
In this paper nine of formulas (theoretical and experimental) for the heat partition ratio were employed to study the temperature distributions of two different geometrical types of the solid disc brake during emergency brake application. A two-dimensional finite element analysis incorporating specific values of the heat partition ratios was carried out. The boundary heat flux uniformly distributed over the circumference of a rubbing path to simulate the heat generated at the pad/disc interface was applied to the model. A number of factors over the heat partition ratio that affects the temperature fields are included and their importance is discussed.
Źródło:
Acta Mechanica et Automatica; 2011, 5, 2; 35-41
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on heat flow in granite sample using thermal imaging camera
Autorzy:
Małek, E.
Miedzińska, D.
Niezgoda, T.
Stankiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/242569.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
thermovision
thermal imaging camera
temperature distribution
granite
aluminum foam sample
heat flow
Opis:
Research on heat flow in granite sample and sample of aluminium foam with the use of a thermal imaging camera is presented in the paper. Temperature distribution on the surface of the sample as a function of time was obtained on the basis of data from the thermal imaging camera. Thermovision is one of the most universal technology, which is applied for detection of infrared radiation. This technique allows observing and record infrared radiation emitted by objects located in the surrounding environment. This technology allows obtaining, in a short time, temperature distribution on the surface of the sample. The thermograms (pictures showing on the surface of the object) are types of photos showing temperature distribution on the tested object surface which is achieved on the base of a specified range of electromagnetic radiation. Accurate measurement of the temperature distribution on the heated granite sample surface was obtained using a thermal imaging camera FLIR SC 6000. Thermal imaging camera was connected to the computer equipped with control software FLIR ResearchIR Max. Heat source was applied in the experiment as a cast iron hotplate with high efficiency heating, gradual control and 1500W power. Obtained results showed regular temperature distribution over the surface of researched sample.
Źródło:
Journal of KONES; 2016, 23, 4; 327-333
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical and thermal stresses issues related to a size of a four-stroke piston based on a Renault Premium DXi11 430 460 EEV engine
Autorzy:
Kaliszewski, M.
Mazuro, P.
Powiązania:
https://bibliotekanauki.pl/articles/242061.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
heat transfer
temperature distribution
four-stroke engine piston
finite element method
size related issues
Opis:
The size of an engine is one of the factors affecting its thermal efficiency. It is known that with an increase of the size of the engine, the cubic capacity and heat generation grows in the third power, whereas thermal losses are proportional only to the second power of the size (due to heat exchange surface). However, the increase in the size of the engine generates some problems related to its mass, rotational speed and heat load, the last of which is a subject of these considerations. In the article, the influence of the piston size on its thermal and mechanical stresses is considered. Similar boundary conditions for both cases were assumed. Simulation of the steady-state heat transfer and mechanical simulation were carried out using the Finite Element Method. In each analysis, both the original version of the piston and its scaled version were considered. The boundary conditions were adopted on the basis of engine catalogue data and available literature. The results of analyses were discussed.
Źródło:
Journal of KONES; 2018, 25, 3; 275-282
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hot Layer Formation during the Crude Oil Fires
Formatowanie się warstwy gorącej podczas pożarów ropy naftowej
Autorzy:
Jarosz, W.
Stawczyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/136314.pdf
Data publikacji:
2016
Wydawca:
Szkoła Główna Służby Pożarniczej
Tematy:
burning rate
temperature distribution
heat transfer
boilover
szybkość spalania
rozkład temperatury
transfer ciepła
wyrzut
Opis:
The paper presents the research results on hot layer formation during the crude oil fires, the conditions for creating a hot layer, mechanisms of the boilover and its accompanying dangerous phenomena. The research was carried out in The Main School of Fire Service in Warsaw. In the experiments, crude oil was burned in tanks with the diameter of 1.4 m and two different heights – 0.7 and 1.4 m.
W artykule przedstawiono wyniki badań nad formowaniem się warstwy gorącej, warunków tworzenia się warstwy gorącej, mechanizmu wyrzutu i zjawisk towarzyszących podczas pożarów ropy naftowej, które zostały przeprowadzone w Szkole Głównej Służby Pożarniczej w Warszawie. W eksperymentach spalano ropę naftową w zbiornikach o średnicy 1,4 m i dwóch różnych wysokościach – 0,7 i 1,4 m.
Źródło:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej; 2016, 1, 58; 5-16
0239-5223
Pojawia się w:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of thermal and mechanical stresses of Renault Premium DXi11 460 EEV four-stroke piston
Autorzy:
Kaliszewski, M.
Mazuro, P.
Powiązania:
https://bibliotekanauki.pl/articles/245402.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
heat transfer
temperature distribution
four-stroke engine piston
finite element method
1D combustion
Opis:
In this article the engine piston Renault Premium DXi11 430 460 EEV has been analysed using the Finite Element Method. Analysis consider as well heat transfer phenomenon as the thermal and mechanical strains of the piston. Simulations were performed for the point of engine maximum power. Piston material was assumed to be 40HM (1.7225) steel and its properties are delivered basing on available scientific papers. The simulation assumed mean values of heat transfer coefficient, reference temperature and cycle pressure based on engine data, maximum power engine work simulation in AVL Boost software and literature. Part of boundary condition (e.g. cylinder wall temperature) was assumed basing on authors’ engineering intuition and experience. The resulting temperature distribution in the piston was implemented for geometrically nonlinear mechanical FEM analysis. Both the analysis of thermal stresses and stresses of the hot piston in the top dead centre were performed.
Źródło:
Journal of KONES; 2018, 25, 2; 169-175
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of the heating of a die for the extrusion of aluminium alloy profiles in terms of thermochemical treatment
Autorzy:
Joachimiak, Damian
Judt, Wojciech
Joachimiak, Magda
Powiązania:
https://bibliotekanauki.pl/articles/27312236.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
temperature distribution
solid component
extrusion
aluminium profiles
gas nitriding
direct
inverse
problem
heat conduction equation
Opis:
Thermochemical treatment processes are used to produce a surface layer of the workpiece with improved mechanical properties. One of the important parameters during the gas nitriding processes is the temperature of the surface. In thermochemical treatment processes, there is a problem in precisely determining the surface temperature of heat-treated massive components with complex geometries. This paper presents a simulation of the heating process of a die used to extrude aluminium profiles. The maximum temperature differences calculated in the die volume, on the surface and at the most mechanically stressed edge during the extrusion of the aluminum profiles were analysed. The heating of the die was simulated using commercial transient thermal analysis software. The numerical calculations of the die assumed a boundary condition in the form of the heat transfer coefficient obtained from experimental studies in a thermochemical treatment furnace and the solution of the nonstationary and non-linear inverse problem for the heat conduction equation in the cylinder. The die heating analysis was performed for various heating rates and fan settings. Major differences in the surface temperature and in the volume of the heated die were obtained. Possible ways to improve the productivity and control of thermochemical treatment processes were identified. The paper investigates the heating of a die, which is a massive component with complex geometry. This paper indicates a new way to develop methods for the control of thermochemical processing of massive components with complex geometries.
Źródło:
Archives of Thermodynamics; 2023, 44, 2; 159--175
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wymiany ciepła w prętach o stałym i zmiennym przekroju
Analysis of heat transfer in pin fins of constant and non-constant cross sections
Autorzy:
Wojtas, Martyna
Powiązania:
https://bibliotekanauki.pl/articles/101707.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydział Inżynierii Środowiska i Energetyki. Instytut Techniki Cieplnej
Tematy:
przewodzenie ciepła
rozkład temperatur
metody obliczeniowe
żebra
pręty
heat conduction
temperature distribution
calculation methods
Pin Fin
Opis:
W artykule opisano metody obliczeniowe wykorzystywane do badania zjawiska przepływu ciepła. Do analizy użyte zostały wybrane kształty prętów i żeber wykonanych z materiałów o różnych właściwościach cieplnych. Stworzono model numeryczny przewodzenia ciepła analizowanych obiektów. Zbudowano stanowisko laboratoryjne do wizualizacji rozkładu temperaturyw prętach prostych oraz stożkowych z wykorzystaniem kamery termowizyjnej. Głównym celem prezentowanej pracy było sprawdzenie poprawności stosowania modelu analitycznego.Zbadano również strumienie ciepła przekazywane przez wybrane żebra. Przedstawiono wyniki różnych metod obliczeniowych oraz wyciągnięto z nich wnioski. Porównano wpływ kształtu oraz materiału prętów na wymianę ciepła i rozkłady temperatury.
The article describes the calculation methods used to study the heat transfer. Selected shapes of pin fins and materials with different thermal properties were used for the analysis. Anumerical model of heat conduction of the analyzed objects was created. A laboratory set up was built to visualize the temperature distribution of the straight pin fins and pin fins of cone profile with blunt tip using the infrared camera. The main purpose of the presented chapter of the monograph was to check the right of using the analytical model. The results and conclusions of different calculation methods were presented. The shapes and materials of fins were also compared.
Źródło:
Archiwum Instytutu Techniki Cieplnej; 2018, 4; 153-187
2451-277X
Pojawia się w:
Archiwum Instytutu Techniki Cieplnej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza numeryczna rozkładu temperatury w zewnętrznej przegrodzie pionowej
Numerical analysis of temperature distribution in outside vertical compartment
Autorzy:
Derlatka, A.
Lacki, P.
Powiązania:
https://bibliotekanauki.pl/articles/2065309.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska
Tematy:
metoda elementów skończonych
rozkład temperatury
współczynnik przenikania ciepła
finite element method
temperature distribution
heat transfer coefficient
Opis:
W pracy przedstawiono analizę zewnętrznej przegrody pionowej. Poprzez współczynnik przenikania ciepła, wyznaczony analitycznie, określono charakterystykę ochrony cieplnej przegrody. Wykorzystując symulacje komputerowe, wyznaczono rozkład temperatury w przegrodzie oraz czas potrzebny do uzyskania stanu ustalonego. Analizę numeryczną przeprowadzono za pomocą programu ADINA System opartego na metodzie elementów skończonych.
The paper presents the analysis of external wall. Based on heat transfer coefficient, the characteristics of the thermal protection of wall was defined. The heat transfer coefficient was estimated by analytical method. The temperature distribution in the partition and time required to achieve steady state were determined by numerical methods. The ADINA System based on the Finite Element Method (FEM) was used for the calculations.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2014, 1 (13); 22--27
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ zmienności właściwości fizycznych tkanki na rozkład temperatury w tkance przy terapeutycznym oddziaływaniu ultradźwięków
The influence of the physical parameters of tissue on the temperature distribution during ultrasound interaction
Autorzy:
Kruglenko, E.
Powiązania:
https://bibliotekanauki.pl/articles/261178.pdf
Data publikacji:
2012
Wydawca:
Politechnika Wrocławska. Wydział Podstawowych Problemów Techniki. Katedra Inżynierii Biomedycznej
Tematy:
ultradźwięki
rozkład temperatury
tkanka miękka
przewodność cieplna
ciepło właściwe
infrasounds
temperature distribution
soft tissue
thermal conductivity
heat capacity
Opis:
Artykuł dotyczy numerycznego wyznaczania in vivo przestrzennego i czasowego rozkładu temperatury po oddziaływaniu na tkankę zogniskowaną wiązką ultradźwiękową małej mocy. Celem pracy jest analiza wpływu parametrów fizycznych tkanki na rozkład temperatury oraz przedstawienie wyników obliczeń dla modelu wątroby szczura, w którym uwzględniono zależność parametrów fizycznych tkanki od temperatury. Wykazano, że przewidywana temperatura tkanki po 20-minutowym oddziaływaniu w większym stopniu zależy od zmiany przewodnictwa cieplnego tkanki niż od jej ciepła właściwego. Parametry materiałowe wody i tkanki wątroby przyjęto na podstawie danych z literatury. Założono, że geometria modelu numerycznego odpowiada rzeczywistemu położeniu obszaru oddziaływania względem głowicy emitującej zogniskowaną wiązkę ultradźwiękową.
The paper concerns the numerical calculation of the spatiotemporal distribution of the temperature field induced by a low power focused ultrasound beam within tissues in vivo. The aim of the study was to analyze the influence of various tissue parameters on the temperature distribution and to present the results of calculations for the rat liver model, taking into account the dependence of physical parameters on the temperature. It was shown that the predicted tissue temperature after 20 minutes of interaction depends more on the tissue thermal conductivity than its heat capacity. The material parameters of water and liver tissue were taken from the literature, and the geometry of numerical model corresponds to the actual location of the interaction area of the transducer emitting highly focused ultrasound beam.
Źródło:
Acta Bio-Optica et Informatica Medica. Inżynieria Biomedyczna; 2012, 18, 4; 250-254
1234-5563
Pojawia się w:
Acta Bio-Optica et Informatica Medica. Inżynieria Biomedyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on transport packages used for food freshness preservation based on thermal analysis
Autorzy:
Yu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/240937.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer theory
logistics transportation
Ansys Flotran
temperature distribution
teoria przenikania ciepła
logistyka transportowa
ANSYS Flotran
rozkład temperatury
Opis:
In recent time, as the Chinese consumption level increases, the consumption quantity of high-value fruits, vegetables and seafood products have been increasing year by year. As a consequence, the traffic volume of refrigerated products also increases yearly and the popularization degree of the cold-chain transportation enhances. A low-temperature environment should be guaranteed during transportation, thus there is about 40% of diesel oil should be consumed by the refrigerating system and the cold-chain transportation becomes very costly. This study aimed to explore methods that could reduce the cost of transport packages of refrigerated products. On the basis of the heat transfer theory and the fluid mechanics theory, the heat exchanging process of corrugated cases during the operation of refrigerating system was analyzed, the heat transfer process of corrugated cases and refrigerator van was theoretically analyzed and the heat balance equation of corrugated cases was constructed.
Źródło:
Archives of Thermodynamics; 2016, 37, 4; 121-135
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature Distribution Measurements in the Gyál MSW Landfil
Pomiary rozkładu temperatury na składowisku odpadów Gyál (Węgry)
Autorzy:
Magyar, T.
Faitli, J.
Powiązania:
https://bibliotekanauki.pl/articles/318943.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
stałe odpady komunalne
rozkład temperatury
wytwarzanie ciepła rozkładu
odciek
gaz wysypiskowy
municipal solid waste
temperature distribution
decomposition heat generation
leachate
landfill gas
Opis:
Mixed municipal solid waste (MSW) landfills can serve as energy sources, because the temperature inside of them is high for a long time period. There are many mechanical, chemical and biological processes taking place simultaneously. Probably, there are aerobic and anaerobic biological decomposition taking place simultaneously because the average temperature can be higher than 40ºC for decades. The inside operation of the heterogeneous MSW landfills is a really complex phenomenon. For the better knowledge about the operation of MSW landfills as bioreactors more measured data is necessary. For this reason a temperature, leachate and landfill gas monitoring system was installed into the Gyál (Hungary) MSW landfill. One hundred temperature sensors were installed into ten 16 m depth monitoring wells. Since two years temperature data has been red weekly. This data base is now available for analysis. The temperature monitoring wells were drilled into four different landfill sections. The deposition time of the waste is different in the different landfill sections. Exponential temperature increase can be observed at the young waste section and almost constant or decreasing temperature tendency at the older ones. Characterising temperature – time functions were determined by simple curve fitting. The vertical temperature distribution in the monitoring wells was also analysed.
Zmieszane stałe odpady komunalne (MSW) zdeponowane na składowisku mogą służyć jako źródło energii, ponieważ temperatura wewnątrz składowisku utrzymuje się przez dłuższy czas na wysokim poziomie. W składowisku zachodzi jednozcesnie wiele procesów mechanicznych, chemicznych i biologicznych. Procesy rokładu biologicznego tlenowe i beztlenowe mogą zachodzić równocześnie gdyż średnia temperatura może być wyższa niż 40°C przez dziesiątki lat. Zjawiska zachodzace wewnątrz skladowisk odpadów zmieszanych są bardzo złożone. W artykule przedstawiono wyniki badań nad funkcjonowaniem składowiska odpadów komunalnych Gyál (Węgry). Zainstoalowano system monitoringu temperatury, odcieków i gazu wysypiskowego. Sto czujników temperatury zainstalowano w dziesięciu studiach o głębokości 16 m rozlokowanych w czterech sekacjach składowiska. Monitoring prowadzono w ciągu dwóch lat zbierając dane raz na tydzień. Uzyskana baza danych została poddana analizie. Czas składowania jest różnych dla różnych sekcji składowiska. Obserwuje się gwałtowny wzrost temperatury na początku składowania, przedstawiono krzywe zmiany temperatury w czasie a także zmiany temperatury z głębkokością studzienek.
Źródło:
Inżynieria Mineralna; 2016, R. 17, nr 2, 2; 183-190
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies