Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "x-ray" wg kryterium: Temat

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 16
Tytuł:
Study of Nonmetallic Inclusions in Aluminum–Silicon Alloys
Autorzy:
Galek, Tomasz
Łączek, Andrzej
Łysiak, Karol
Powiązania:
https://bibliotekanauki.pl/articles/176066.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum–silicon alloy
nonmetallic inclusions
scanning electron microscopy
X-ray tomography
Opis:
In this article, a study of nonmetallic inclusions introduced during the casting process of the aluminum–silicon alloy is presented. The samples were investigated using a scanning electron microscope to find the chemical composition and X-ray tomography to check the volumetric content of the non-metallic inclusions. The samples were made from AlSi7Mg alloy, used for car wheels, with 7% weight content of Si, 89% of Al, and 0.3% of Mg. The main goal of our investigations was to find out the chemical composition of the impurities and to identify the stage of the casting process at which the impurities are introduced.
Źródło:
Advances in Manufacturing Science and Technology; 2020, 44, 1; 28-31
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cooling Characteristic and Microstructure of Ni-Si-B-Ag Alloy
Autorzy:
Wojciechowska, M.
Ziewiec, K.
Mucha, D.
Powiązania:
https://bibliotekanauki.pl/articles/356071.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
amorphous/crystalline composite
scanning electron microscopy
X-ray diffraction
thermography
melt spinning
Opis:
The aim of this work was to investigate the possibility of obtaining an amorphous/crystalline composite starting from Ni-SiB-based powder grade 1559-40 and silver powder. The alloy was produced using arc melting of 95% wt. Ni-Si-B-based powder (1559-40) and 5% wt. Ag powder. Ingot was re-melted on a copper plate and observed while cooling using a mid-wave infra-red camera. The alloy was then melt-spun in a helium atmosphere. The microstructure of the ingot as well as the melt-spun ribbon was studied using light microscopy and scanning electron microscopy with energy dispersive spectrometry. Phase identification was performed by means of X-ray diffraction. The observations confirmed an amorphous/crystalline microstructure of the ribbon where the predominant constituent of the microstructure was an amorphous phase enriched with Ni, Si, and B, while the minor constituent was an Ag-rich crystalline phase distributed in a film along the melt-spinning direction.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1357-1360
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Materiały dla jednowarstwowych ogniw paliwowych
Materials for single layer fuel cells
Autorzy:
Winiarz, P.
Powiązania:
https://bibliotekanauki.pl/articles/134696.pdf
Data publikacji:
2016
Wydawca:
ADVSEO
Tematy:
fuel cell
composite material
proton conductor
lanthanum niobate
scanning electron microscopy
x-ray diffraction
Opis:
A composite material, which may be further applied as a single layer fuel cell, was synthesized using solid state synthesis method. Composite consisted of two components. The first was a nanoceramic proton conductor – calcium doped lanthanum niobate. The second one was a nanoceramic semiconductor oxide composed of lithium, nickel and zinc oxides respectively. Structural and electrical investigations were performed on the received material. Scanning electron microscope images showed that the microstructure on the surface of this material is homogeneous. Energy dispersive X-Ray diffraction confirms that the components of the investigated composite are mixed together in a volume of material allowing to current flow through the percolation threshold. Open circuit voltage was changing during measurement from 0.8V to 0.6V. Moreover, the material did not change its structural properties during the current flow, hence it could be a good candidate to the production of single layer fuel cells.
Źródło:
Technical Issues; 2016, 4; 104-109
2392-3954
Pojawia się w:
Technical Issues
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural Transition in SrZnO Laser Pulse Deposited Alloy
Autorzy:
Albrithen, H. A.
Elnaggar, M.
Ozga, K.
Szota, M.
Alahmed, Z. A.
Alanazi, A. Q.
Alshahrani, H.
Alfaifi, E.
Djouadi, M. A.
Labis, J. P.
Powiązania:
https://bibliotekanauki.pl/articles/355190.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
oxide materials
solid state alloys
structural phase transition
X-ray diffraction
scanning electron microscopy
Opis:
We have discovered a structural transition for the SrZnO alloy films from a wurtzite to a rock-salt structure, leading to a reduction in the (112̲0)/(0001) surface energy ratio. The films were grown by pulsed laser deposition using different SrO ratios, x. We have revealed that growth at a higher temperature, 750°C, resulted in a sharp 0002 peak at a low SrO content (5%), whereas growth at a higher SrO content (10%) resulted in a non-crystalline film with minute crystallites with a (112̲0) orientation. Generally the crystallinity decreased as the SrO content increased. No results obtained for the crystalline films showed any orientation of significant peaks besides the peak attributed to the (0001) plane, suggesting epitaxial growth. Optical measurements showed difference in transmission widows of alloys with different SrO percentage, and this was correlated to SrO influence on growth mode as indicated by scanning electron imaging. The studied SrZnO films, with SrO/(SrO + ZnO) ≤ 0.25, were grown by pulsed laser deposition using different SrO ratios, x. The effects of temperature and oxygen pressure during growth on the films’ structural properties were investigated. XRD results indicate that the film crystallinity was improved as the temperature and O2 pressure increased up to 650°C and 0.5 Torr, respectively.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 1; 211-216
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of selected diffractive and microscopic methods to evaluate the physical state of drug and morphology of microspheres obtained by spray drying of furosemide with Eudragit L30 D-55.
Autorzy:
Ostróżka-Cieślik, Aneta
Sarecka-Hujar, Beata
Krzykawski, Tomasz
Karcz, Jagna
Banyś, Anna
Jankowski, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/895685.pdf
Data publikacji:
2018-06-30
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
X-ray diffraction
scanning electron microscopy
Microsphere
furosemide
laser diffraction
Eudragit L30 D-55
Opis:
In pharmaceutical technology, the analysis of physicochemical properties of raw materials, intermediates and products is part of quality control testing at each stage of designing formulations and in the routine evaluation of the final product. The aim of the study was to analyse the physical state of drug and the morphology of microspheres obtained by spray drying, where furosemide was incorporated in the polymeric matrix of Eudragit L30 D-55. The following optimal parameters of the spray drying process were established: aspirator capacity of 80%, T.in: 140 ° C, pump capacity: 10%. The laser diffraction method was used to analyse the size distribution of microspheres in the following furosemide-Eudragit L30 D-55 systems: 1:1, 1:3, 1:5. X-ray powder diffraction was applied to compare the degrees of crystallinity of the final product and the starting material. Furosemide has crystal structure both before and after spray drying, it occurs in the polymorphic forms (form I crystals). No reflection from the crystalline phase has been found on the diffraction pattern of Eudragit. This is an amorphous substance.
Źródło:
Acta Poloniae Pharmaceutica - Drug Research; 2018, 75, 3
0001-6837
2353-5288
Pojawia się w:
Acta Poloniae Pharmaceutica - Drug Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza SEM czarnego tonera na wydrukach. Część II
SEM analysis of black toner on printouts. Part II
Autorzy:
Łasińska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/1052550.pdf
Data publikacji:
2021-04-29
Wydawca:
Agencja Bezpieczeństwa Wewnętrznego
Tematy:
toner
brother
konica minolta
skaningowa mikroskopia elektronowa
mikroanaliza rentgenowska
sem/edx
scanning electron microscopy
x-ray
microanalysis
Opis:
Eksperci w zakresie badań dokumentów są często proszeni o określenie, czy wydruk pochodzi z określonej drukarki laserowej. Drukarkę rzadko można zidentyfikować, chyba że na wydruku są widoczne jej unikalne wady lub nieprawidłowości. W artykule przedstawiono możliwości identyfikacji i weryfikacji tonerów na wydrukach uzyskanych z różnych drukarek laserowych przy użyciu skaningowej mikroskopii elektronowej. W sumie 21 wydruków uzyskano z 21 różnych modeli maszyn drukujących Brother i Konica Minolta. Szesnaście wydruków uzyskano z drukarek, w których były oryginalne kasety z tonerem, a pięć z drukarek z zamiennikami. Ustalono jasne kryteria oceny indywidualnej. Na podstawie zdjęć SEM oraz tych kryteriów ujawniono szczegóły topografii struktury tonera. Na podstawie przeprowadzonych badań określono różnice lub podobieństwa tonerów na badanych wydrukach.
Document examiners are frequently asked to determine whether or not a printout originated from a particular laser printer. The printer can rarely be identified unless some unique defects or irregularities of the printing are present on the printout. This article presents an overview of a systematic approach to characterizing and discriminating the toner of different laser printers using scanning electron microscopy. A total of twenty-one collected printouts were printed on twenty-one different Brother and Konica Minolta printing machine models. Sixteen printouts were obtained using printers with original toner cartridges while five printouts were obtained using printers with compatible cartridges. Clear criteria were established for individual assessment. Based on the SEM images and established criteria the details of topography of the toner structure were revealed. Due to this tudy, the differences or similarities of toners on tested printouts were determined. The SEM technique can be successfully, simply, and rapidly applied to the analysis of toners on paper documents.
Źródło:
Przegląd Bezpieczeństwa Wewnętrznego; 2021, 13, 24; 221-249
2080-1335
2720-0841
Pojawia się w:
Przegląd Bezpieczeństwa Wewnętrznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Obrazowanie wybranych własności utworów solnych za pomocą różnych metod badawczych
Defining selected salt rocks properties using various research methods
Autorzy:
Cebulski, D.
Urbaniec, A.
Kasprzyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/1835436.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
sól kamienna
halit
komputerowa tomografia rentgenowska
skaningowy mikroskop elektronowy
salt rocks
halite
X-ray computer tomography
scanning electron microscopy
Opis:
Artykuł przedstawia wyniki przeprowadzonych analiz materiału rdzeniowego z wybranych utworów solnych, reprezentujących cechsztyńską i mioceńską formację solonośną. W celu określenia charakterystycznych parametrów i własności badanych skał solnych wykorzystano następujące metody: rentgenowską tomografię komputerową (CT), analizę w skaningowym mikroskopie elektronowym (SEM), analityczne oznaczenia składu chemicznego, fluorescencję rentgenowską (XRF) oraz dyfrakcję rentgenowską (XRD). Zastosowane metody badawcze pozwoliły określić zróżnicowanie najbardziej charakterystycznych cech analizowanych utworów.
The article presents the results of well core analysis from salt rocks, representing the Zechstein and the Miocene salt formations. The following methods were applied in order to determine the characteristic parameters and properties of the analyzed salt rock: X-ray computer tomography (CT), scanning electron microscopy (SEM), methods of the chemistry identification, X-ray fluorescence (XRF) and X-ray diffraction (XRD). The applied research methods helped to identify the diversity of the most characteristic features of the tested rocks.
Źródło:
Nafta-Gaz; 2017, 73, 4; 227-235
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the Chemical Unhairing Process on Pulled Wool Characteristics
Autorzy:
Abdellaoui, Olfa
Harizi, Taoufik
Msahli, Slah
Powiązania:
https://bibliotekanauki.pl/articles/2171990.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
ATR-FTIR
red face Barbary sheep
sheep breed
chemical unhairing process
pulled wool
SEM
scanning electron microscopy
X-ray
Opis:
Textile research is being driven to find sustainable materials as an alternative to raw fibers. In fact, reusing fibrous waste, as a byproduct, is one of the most important environmental challenges that confront the world. This research focused on studying pulled wool fibers as a natural fiber to reduce environmental loading. There are large amounts of residual pulled wool fibers that can be recycled and valorised. Therefore, raw and pulled wool fibers were characterized and compared. Scanning Electron Micrographs (SEM) results show that on the pulled wool fiber, the surface became rougher and the scales appear affected and less dense. Based on the X-ray diffraction (XRD) results, the crystallinity of the pulled fiber decreased lightly. Attenuated Total Reflectance-Fourier Transform Infra Red (ATR-FTIR) spectroscopy analyzes presented some changes in chemical composition. A High-Performance Liquid Chromatography (HPLC) test showed an increase in the amount of cystic acids. The pulled wool fiber indicates that it might have damaged some crosslinks of macromolecular chains in the fiber. Thus, physical, chemical and mechanical properties are affected during the chemical unhairing process. This research purpose was to increase the potential for better value of pulled wool as it presents the natural fiber most used in several applications.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 3 (151); 70--78
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation, characterization and optimization of cross-linked fructosyltransferase aggregates for the production of prebiotic fructooligosaccharides
Autorzy:
Ademakinwa, A.N.
Ayinla, Z.A.
Omitogun, O.G.
Agboola, F.K.
Powiązania:
https://bibliotekanauki.pl/articles/81247.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fructosyltransferase
Aureobasidium pullulans
fructooligosaccharide
prebiotic
statistical optimization
scanning electron microscopy
X-ray spectroscopy
Fourier transform infrared spectroscopy
biotransformation
chemometric analysis
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2018, 99, 4
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterisation of Mg-Zn-Ca-Y powders manufactured by mechanical milling
Autorzy:
Lesz, S.
Tański, T.
Hrapkowicz, B.
Karolus, M.
Popis, J.
Wiechniak, K.
Powiązania:
https://bibliotekanauki.pl/articles/1818808.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
Mg-based alloys
scanning electron microscopy
X-ray diffraction analysis
mechanical alloying
stopy magnezu
skaningowa mikroskopia elektronowa
rentgenowska analiza dyfrakcyjna
mechaniczna synteza
Opis:
Purpose: This paper explains mechanical synthesis which uses powders or material chunks in order to obtain phases and alloys. It is based on an example of magnesium powders with various additives, such as zinc, calcium and yttrium. Design/methodology/approach: The following experimental techniques were used: X-ray diffraction (XRD) method, scanning electron microscopy (SEM), determining particle size distributions with laser measuring, Vickers microhardness. Findings: The particle-size of a powder and microhardness value depend on the milling time. Research limitations/implications: Magnesium gained its largest application area by creating alloys in combination with other elements. Magnesium alloys used in various industry contain various elements e.g. rare-earth elements (REE). Magnesium alloys are generally made by casting processes. Consequently, the search for new methods of obtaining materials such as mechanical alloying (MA) offers new opportunities. The MA allows for the production of materials with completely new physico-chemical properties. Originality/value: Thanks to powder engineering it is possible to manufacture materials with specific chemical composition. These materials are characterized by very high purity, specified porosity, fine-grain structure, complicated designs. These are impossible to obtain with traditional methods. Moreover it is possible to refine the process even further minimalizing the need for finishing or machining, making the material losses very small or negligible. Furthermore material manufactured in such a way can be thermally or chemically processed without any problems.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2020, 103, 2; 49--59
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmentally hazard and toxic exoskeletons of marine crustaceans wastes in synthesizing N-deacetylated chitin
Zastosowanie niebezpiecznych i toksycznych dla środowiska egzoszkieletów skorupiaków morskich w syntezie N-deacetylowanej chityny
Autorzy:
El-Mekawy, Rasha E.
Powiązania:
https://bibliotekanauki.pl/articles/2202580.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
chitosan
shrimp shells
scanning electron microscopy
thermal gravimetric analysis
X-ray
diffraction
chitozan
skorupki krewetek
skaningowa mikroskopia elektronowa
analiza termograwimetryczna
dyfrakcja rentgenowska
Opis:
High molecular weight chitosan was synthesized from shrimp shells. Chemical structure of chitosan was confirmed using FT-IR, XRD, TGA, and SEM analyses. Physicochemical properties of chitosan such as molecular weight (800 000 g/mol), deacetylation degree (80%), ash content (1%) indicating effectiveness of demineralization step in removing minerals, water binding capacity (4220%), and fat binding capacity (537%), were determined. FT-IR spectra exhibited characteristic joint band at 3365 cm-1 due to –OH and –NH2 regarding to the conversion of chitin acetyl group to NH2 of chitosan.
Z muszli krewetek zsyntetyzowano chitozan o wysokiej masie cząsteczkowej. Strukturę chemiczną chitozanu potwierdzono metodami FT-IR, XRD, TGA i SEM. Określono właściwości fizykochemiczne chitozanu takie jak masa cząsteczkowa (800 000 g/mol), stopień deacetylacji (80%), wskazu jącą na skuteczność procesu demineralizacji zawartość popiołów (1%), zdolność wiązania wody (4220%) i zdolność wiązania tłuszczu (537%). Widma FT-IR wykazały charakterystyczne pasmo przy liczbie falowej 3365 cm-1, pochodzące od grup –OH i–NH2, wynikające z przekształcenia grupy acetylowej chityny w NH2 chitozanu.
Źródło:
Polimery; 2022, 67, 10; 503--508
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Fly Ash Concrete With Scanning Electron Microscopy and X-Ray Diffraction
Autorzy:
Uzbaş, Burhan
Aydın, Abdulkadir Cüneyt
Powiązania:
https://bibliotekanauki.pl/articles/103299.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
fly ash
microstructure of concrete
scanning electron microscopy
x-ray diffraction
calcium hydroxide
popiół lotny
mikrostruktura betonu
skaningowa mikroskopia elektronowa
dyfrakcja rentgenowska
wodorotlenek wapnia
Opis:
In this study, the effects of using different ratios of fly ash on hydration products as well as the mechanical and microstructural properties of hardened concrete were investigated. Portland cement was replaced with 5%, 10%, 15% and 20% fly ash (FA) by weight. The microstructural properties of the obtained samples were investigated by means of X-ray diffraction (XRD) and Scanning electron microscopy (SEM). Fly ash has negative effect on 7 days concrete strength; however, it was seen that fly ash increases the compressive strength of 28 and 90 days concrete. The XRD analysis showed that the ratio of calcium hydroxide (CH), which is produced by hydration, decreases depending on the concrete age and the amount of fly ash. The SEM analysis showed that the usage of fly ash decreases gaps and increases C-S-H which is also a hydration production. When Portland cement was replaced with 10% fly ash by weight, compressive strength has increased and microstructure of concrete has improved. The reason for this is filling of gaps by fly ash and the decrease in the amount of Ca(OH)2 due to the reaction between fly ash and Ca(OH)2. Within this scope, the development in microstructure of fly ash concrete was evaluated in 90 days duration and a change of the development with compressive strength was investigated.
Źródło:
Advances in Science and Technology. Research Journal; 2019, 13, 4; 100-110
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ czynników chemicznych na strukturę i budowę włosów ludzkich
The influence of chemical factors on the structure of human hair
Autorzy:
Dobosz, Magda
Kalska-Szostko, Beata
Powiązania:
https://bibliotekanauki.pl/articles/171505.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
badanie włosów
chemia kryminalistyczna
skaningowa mikroskopia elektronowa
spektroskopia rentgenowska z dyspersją energii
energy dispersive X-ray spectroscopy
hair tests
forensic chemistry
scanning electron microscopy
Opis:
The main purpose of the presented study was to investigate the influence of chemical factors on the morphology of human hair. Few factors that may occurduring criminal offenses were selected for testing, including aqueous solutions of hydrochloric acid (HCl), sodium hydroxide (NaOH), lead(II) nitrate (Pb(NO3)2), cadmium(II) nitrate (Cd(NO3)2), sodium chloride (NaCl), ethanol (C2H5OH), water (H2O). The description of the effects of chosen chemical compounds on hair was made mainly on the basis of Scanning Electron Microscopy (SEM). In addition, the elemental composition of the hair as an effect of interaction with solution was examined and analyzed using an EDX (Energy - Dispersive X-ray) spectrometry. Performed tests show the degree of human hair degradation and contamination depending on the examined factor and time.
Źródło:
Wiadomości Chemiczne; 2020, 74, 7-8; 453-476
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Działanie czynników mechanicznych oraz termicznych na morfologię włosów ludzkich i zwierzęcych
Effect of mechanical and thermal factors on the structure of human and animal hair
Autorzy:
Dobosz, Magda
Kalska-Szostko, Beata
Powiązania:
https://bibliotekanauki.pl/articles/1410887.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
badanie włosów
chemia kryminalistyczna
skaningowa mikroskopia elektronowa
spektroskopia rentgenowska z dyspersją energii
energy dispersive X-ray spectroscopy
hair tests
forensic chemistry
scanning electron microscopy
Opis:
The main purpose of the presented study was to investigate and compare the influence of mechanical and thermal factors on the morphology of human and animal hair. Several factors that may occur during criminal offenses were selected for testing including cutting by a scalpel or scissors, damaging by a hammer; and high, or low-temperature thermal treatment (heating for 1h, or 24 hours at elevated temperatures 100°C, 200°C, and 300°C, as well as freezing for 24 hours at -20°C, or for 10 minutes in liquid nitrogen (-197°C)). The impact of selected mechanical and temperature factors on human and animal hair was made mainly on the basis of Scanning Electron Microscopy (SEM). Moreover, the elemental composition of the hair was investigated and analyzed using an EDX (Energy - Dispersive X-ray) spectrometry. Performed tests show the degree of human hair degradation depending on the examined factor and time.
Źródło:
Wiadomości Chemiczne; 2021, 75, 5-6; 823-844
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Whisker Formation On Galvanic Tin Surface Layer
Tworzenie whiskerów na powierzchniowej warstwie cyny wytworzonej galwanicznie
Autorzy:
Radanyi, A. L.
Sycheva, A.
Gacsi, Z.
Powiązania:
https://bibliotekanauki.pl/articles/356255.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin whiskers
galvanic tin layer
mechanical stress
X-ray fluorescence spectrometry
scanning electron microscopy
wiskery cynowe
galwaniczne powłoki cynkowe
naprężenia mechaniczne
rentgenowska spektroskopia fluorescencyjna
mikroskop skaningowy (SEM)
Opis:
The present work reports the effect of substrate composition, thickness of the tin electroplate and its morphology on pressure-induced tin whisker formation. Pure tin deposits of different thickness were obtained on a copper and brass substrates using methane sulfonic industrial bath. The deposits were compressed by a steel bearing ball forming imprint on the surface. The microstructure of tin whiskers obtained at the boundary of each imprint, their length and number were studied using both light and scanning electron microscopy. It was shown that the most intensive formation and growth of whiskers was observed in the first two hours. In general, brass substrate was shown to be more prone to whisker formation than copper independently of the tin coating thickness. The results have been compared with industrial bright tin finish on control unit socket leads and proposals have been made as to modification of the production process in order to minimize the risk of whiskering.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1341-1345
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 16

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies