Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Noise reduction" wg kryterium: Temat


Tytuł:
A pulse noise detection algorithm using phase scattering
Autorzy:
Kardasz, P.
Powiązania:
https://bibliotekanauki.pl/articles/376739.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
signal processing
audio reconstruction
noise reduction
Opis:
One of the most difficult problems that appears during the process of archival sound restoration is the detection and reduction of the pulse type noise. This kind of noise is the result of contamination or damage to the analog record material. Pulse interference detection algorithms are prone to false positive results. Therefore, to ensure high reliability of the pulse detection process, more than one algorithm should be used and then the results of these algorithms should be analyzed using advanced methods, including intelligent algorithms. The paper presents the pulse detection algorithm based on the phase scattering. Since the Dirac impulse and white noise have the same amplitude part of their spectra, the phase scattering transforms the pulse to the noise. Then a pulse can be detected by comparing the envelope of the original and processed signals. The proposed algorithm has been tested using synthetic test signals as well as a fragment of the archival recording on the damaged record. The directions of further research are outlined.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2017, 91; 165-173
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of Acoustic Camera for Noise Sources Localization and Noise Reduction in the Industrial Plant
Autorzy:
Fiebig, Wiesław
Dąbrowski, Damian
Powiązania:
https://bibliotekanauki.pl/articles/178071.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
noise source localization
noise reduction
industrial noise control
acoustic camera
Opis:
The paper presents results of the localization of main noise sources in the industrial plant. Identification of main noise sources was made with an acoustic camera using Beamforming Method. Parallel to the measurements by means of the acoustic camera, sound level measurements on the main noise sources have been performed. Based on the calculations, prediction regarding the noise emission at residential buildings located near to the plant has been determined. Acoustic noise maps have been performed with LEQ Professional software, which includes the 3D geometry of the buildings inside the plant. It has been established that, after introduction of noise reduction measures in the plant, the noise levels at the observation points in the residential area meets the limit values.
Źródło:
Archives of Acoustics; 2020, 45, 1; 111-117
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the Inter Teeth Volumes on the Noise Generation in External Gear Pumps
Autorzy:
Fiebig, W.
Powiązania:
https://bibliotekanauki.pl/articles/177707.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gear pumps
noise reduction
simulation
inter teeth volume
Opis:
The paper shows the new method for noise reduction in external gear pumps based on the analysis of the pressure in inter teeth volumes. The simulation model and measurement results of pressure changes in the inter teeth volume has been presented. Based on simulation results an additional volume has been obtained, which is connected to the inter teeth volume (decompression filter volume). Due this additional volume the build down processes in the pump are longer and the pressure overdue in the inter teeth volumes are smaller. This leads to the reduction of the dynamical excitation forces inside the pump and noise, especially in the higher frequency range I.
Źródło:
Archives of Acoustics; 2014, 39, 2; 261-266
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Noise Reduction of Spiral Ducts
Autorzy:
Łapka, W.
Cempel, C.
Powiązania:
https://bibliotekanauki.pl/articles/90374.pdf
Data publikacji:
2007
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
spiral duct
noise reduction
sound propagation
computational modeling
Opis:
The paper presents noise reduction (NR) of spiral ducts as a result of computational modeling of acoustic wave propagation. Three-dimensional models were created with the finite element method in COMSOL Multiphysics version 3.3. Nine models of spiral ducts with 1–9 spiral leads were considered. Time-harmonic analysis was used to predict NR, which was shown in spectral and interval frequency bands. Spiral duct performance can be seen as a comparison of NR before and after a change from a circular to a spiral duct.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2007, 13, 4; 419-426
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja poziomu hałasu na stanowisku pracy
Identification of noise level at the workplace
Autorzy:
Rydz, D.
Krakowiak, M.
Bajor, T.
Powiązania:
https://bibliotekanauki.pl/articles/103454.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Tematy:
hałas przemysłowy
redukcja hałasu
stanowisko pracy
industrial noise
noise reduction
workplace
Opis:
Terminem hałas opisywane są dźwięki o niepożądanym lub szkodliwym wpływie na człowieka. Ludzie na całym świecie są narażeni na hałas w miejscu pracy oraz na wszelkie zagrożenia, jakie za sobą on niesie. Od wielu lat problem nadmiernego hałasu w miejscu pracy jest tematem licznych prac z zakresu ergonomii i fizjologii człowieka. Szkodliwość hałasu zależy między innymi od natężenia dźwięku, częstotliwości czy też charakteru jego o zmian w czasie. Pomimo wprowadzenia wielu nowoczesnych rozwiązań ograniczających szkodliwy wpływ hałasu na człowieka, nie ma możliwości całkowitego wyeliminowania go ze środowiska pracy. Dlatego też dla hałasu są ustalane i wprowadzane normy określające dopuszczalne, ze względu na ochronę słuchu, jego wartości na stanowiskach pracy. Pracodawca, w którego zakładzie są eksploatowane urządzenia będące źródłami hałasu, jest zobowiązany do dokonywania pomiarów tego czynnika oraz przeprowadzenia oceny ryzyka zawodowego związanego ze szkodliwym wpływem hałasu na pracowników. W niniejszej pracy zostanie przedstawiony aktualny stan zagadnienia oraz poczynione działania mające na celu ograniczenia hałasu w hali produkcyjnej, w której z znajdują się maszyny do obróbki skrawaniem oraz przeróbki plastycznej metali.
The noise term describes sounds with undesirable or harmful effects on human being. The people around the world are exposed to noise in the workplace and to all sort of hazards connected with him. For many years, the problem of excessive noise in the workplace is the subject of numerous research in field of ergonomics and human physiology. The harmfulness of noise also depends on sound intensity, frequency or nature of its changes in time. Despite the introduction of many modern solutions to reduction the harmful effect of noise on a human being, it is impossible to completely eliminate it from the environment. Therefore, the standards specifying the noise acceptable level at the workstand are established and implemented because of the hearing protection. In case of the plant where operate devices that are sources of the noise, the employer is required to make measurements of this factor and to conduct a risk assessment associated with the harmful effects of the noise on workers. In this work, the current status and made efforts to reduce the noise level in the production room, where the devices for machining and metal forming works, will be presented.
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Technika, Informatyka, Inżynieria Bezpieczeństwa; 2014, T. 2; 363-370
2300-5343
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Technika, Informatyka, Inżynieria Bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Noise reduction at the shooting range by means of level-dependent hearing protectors
Autorzy:
Młyński, Rafał
Kozłowski, Emil
Powiązania:
https://bibliotekanauki.pl/articles/2162681.pdf
Data publikacji:
2019-06-14
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
impulse noise
earplugs
attenuation
earmuffs
noise reduction
level-dependent hearing protectors
Opis:
Background The aim of the tests was to establish the possibilities of reducing impulse noise by using level-dependent hearing protectors at a shooting range. The tests included 9 models of level-dependent earmuffs and 2 models of level-dependent earplugs. They were conducted in the presence of impulse noise generated by 7 types of firearms (pistols, a submachine gun, rifles, a shotgun). Material and Methods The tests were conducted at an outdoor shooting range, using an acoustic test fixture that meets the requirements of the ANSI/ASA S12.42-2010 standard. Noise parameters were established for the noise reaching the microphones installed in the ear simulators of the acoustic test fixture: uncovered and protected by the tested hearing protectors. Results All 11 tested level-dependent hearing protectors allow to satisfactorily (below the exposure limit values) reduce the C-weighted peak sound pressure level and A-weighted maximum sound pressure level parameters of noise produced during shots from the 7 types of firearms included in the study. Moreover, in the most unfavorable case, the permissible number of impulses due to the value of the A-weighted noise exposure level normalized to an 8-h working day parameter exceeds 5000 per day. Conclusions Level-dependent hearing protectors constitute the appropriate means to protect the hearing of people at a shooting range, while maintaining the functionality of these protection devices to transmit speech signals. Med Pr. 2019;70(3):265–73
Źródło:
Medycyna Pracy; 2019, 70, 3; 265-273
0465-5893
2353-1339
Pojawia się w:
Medycyna Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ niedokładności ustawienia anteny na odbiór sygnałów mikrofalowych
The impact of the antenna mispointing on the quality of the satellite signal transmission
Autorzy:
Wilk-Jakubowski, J. Ł.
Powiązania:
https://bibliotekanauki.pl/articles/310666.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
konwenter LNB
redukcja szumów
satelita
LNB
noise reduction
satellite
Opis:
Mikrofalowy sygnał satelitarny dociera na Ziemię z umieszczonych na satelitach transponderów, znajdujących się w przypadku systemów geostacjonarnych w odległości ok. 35786 km od powierzchni Ziemi (gdy stacja naziemna znajduje się w punkcie podsatelitarnym) do ok. 41679 km (gdy stacja naziemna znajduje się w strefie podbiegunowej). Tak usytuowane satelity są praktycznie nieruchome względem Ziemi, a w związku z tym sygnał transmitowany za ich pośrednictwem można odbierać z użyciem nieruchomych, zorientowanych na stałe anten. Wpływa to na znaczną redukcję kosztów budowy systemu. Ponieważ usytuowanie satelity w stosunku do Ziemi jest stabilizowane, powszechnie korzysta się z umieszczonych na satelitach kierunkowych anten o dużym zysku energetycznym, który pozwala zrekompensować straty wynikające z dużej odległości satelity od stacji naziemnej. Kierunek ustawienia anteny odbiorczej (azymut) zależy od położenia satelity oraz współrzędnych geograficznych miejsca odbioru. Te same parametry decydują o ustawieniu anteny w pionie (elewacja). Celem niniejszego artykułu jest analiza wpływu niedokładności ustawienia anteny na moc fali nośnej na wyjściu konwertera LNB oraz współczynnik przydatności systemu G/T w warunkach czystego nieba, jak również podczas opadów deszczu.
One of the parameters to characterize the properties of the antenna is the antenna mispointing. This article aims to analyze the impact of antenna mispointing on the quality of reception of satellite signals in rainy and non-rainy weather. Of interest is the maximum antenna deflection expected due to wind loading and the methods that may be employed to keep it below a value that would cause the antenna mispointing (except in rare instances). In practice we can use a noise floor detector which is coupled to a received radio communications link signal or the predicted and modelled data obtained from the laboratory station in accordance with ITU-R recommendations. The exact values of elevation angles and azimuth can be calculated from appropriate concepts or by using specific software.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 6; 1128-1132, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected aspects of modeling mufflers for exhaust systems of vehicles
Autorzy:
Gągorowski, A.
Melon, A.
Powiązania:
https://bibliotekanauki.pl/articles/245148.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vehicles
noise reduction
exhaust system
mufflers
efficiency of attenuation
Opis:
The world used several solutions exhaust systems of motor vehicles. Today, in addition to the core function of which is to discharge exhaust gases from a combustion engine and noise reduction, these systems must comply with the functions associated with aftertreatment and impact on the characteristics of the engine. Requirements increase for noise suppression, at the tendency to increase engine efficiency and reduce fuel consumption. On the other hand, it seeks to reduce production costs. All this forces the search for new solutions and improve existing ones. In the process of the combustion gases discharge it is also important to eliminate frequency bands especially harmful to people and the environment (including other living organisms). Our goal is to develop a new design muffler of exhaust system that will meet these expectations of producers and users of vehicles. For this purpose, mathematical analysis of a classical systems with circular holes in the perforated pipes and proposed by the authors of the longitudinal gaps systems was performed. The paper presents some aspects of mufflers modeling for reducing acoustic noise emitted from the vehicle. Basic criterion for assessing was therefore the damping effect. Built theoretical models have allowed a rough estimate of acoustic performance at specific frequency bands by determining the transfer impedances. Because the noise reduction in automobiles is a complex, for the construction of such systems one of the important elements is to eliminate these frequency bands of acoustic waves in the process of the exhaust gases discharge which are the most dangerous to humans. The comparative analysis of these systems has allowed to determine the direction of further structural changes.
Źródło:
Journal of KONES; 2013, 20, 2; 97-103
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
HEVC Encoding Assisted with Noise Reduction
Autorzy:
Stankiewicz, O.
Wegner, K.
Karwowski, D.
Stankowski, J.
Klimaszewski, K.
Grajek, T.
Powiązania:
https://bibliotekanauki.pl/articles/226110.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
HEVC encoding
encoder control
model selection optimization
noise reduction
Opis:
Optimization of encoding process in video compression is an important research problem, especially in the case of modern, sophisticated compression technologies. In this paper, we consider HEVC, for which a novel method for selection of the encoding modes is proposed. By the encoding modes we mean e.g. coding block structure, prediction types and motion vectors. The proposed selection is done basing on noise-reduced version of the input sequence, while the information about the video itself, e.g. transform coefficients, is coded basing on the unaltered input. The proposed method involves encoding of two versions of the input sequence. Further, we show realization proving that the complexity is only negligibly higher than complexity of a single encoding. The proposal has been implemented in HEVC reference software from MPEG and tested experimentally. The results show that the proposal provides up to 1.5% bitrate reduction while preserving the same quality of a decoded video.
Źródło:
International Journal of Electronics and Telecommunications; 2018, 64, 3; 285-292
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ modyfikacji zębów na zjawiska dynamiczne w przekładni zębatej w różnych warunkach eksploatacyjnych
Autorzy:
Peruń, G.
Powiązania:
https://bibliotekanauki.pl/articles/196381.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
przekładnia zębata
redukcja drgań
redukcja hałasu
gear
reduction of vibrations
noise reduction
Opis:
Artykuł przedstawia wyniki prac, mających na celu określenie wpływu modyfikacji zarysów zębów na zjawiska dynamiczne, które zachodzą w przekładniach zębatych. Wpływ modyfikacji został określony z wykorzystaniem modelu stanowiska FZG przy uwzględnieniu różnych warunków eksploatacyjnych.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2011, 70; 71-76
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie symulacji komputerowych w procesie obniżenia poziomu hałasu w halach przemysłowych
The use of computer simulation of process of noise reduction in the industrial hall
Autorzy:
Ząbek, P.
Dziechciowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/370813.pdf
Data publikacji:
2013
Wydawca:
Wyższa Szkoła Zarządzania Ochroną Pracy w Katowicach
Tematy:
hałas przemysłowy
symulacje komputerowe
redukcja hałasu
industrial noise
computer simulations
noise reduction
Opis:
Problem nadmiernego hałasu w halach przemysłowych jest zjawiskiem powszechnym. Prawo nakłada na właścicieli firm obowiązek podejmowania działań zmierzających w jego ograniczaniu. Głównym celem pracy jest przedstawienie możliwości ograniczenia hałasu w hali produkcyjnej, w której znajdują się urządzenia do produkcji drutu miedzianego. Wykonane symulacje przeprowadzono w programie Strefa 2002, który umożliwia określenie rozkładu hałasu w pomieszczeniu.
The problem of excessive noise in industrial halls is a common phenomenon. The law impose an obligation on the companies owners into taking activity to limited it. The main purpose of the workis taking the action in terms of limited the noise on the factory hall where there are the machines for the production of copper wire. The series of the simulations was carried out in the program Strefa 2002 which is used to predict the noise distribution in the room.
Źródło:
Zeszyty Naukowe Wyższej Szkoły Zarządzania Ochroną Pracy w Katowicach; 2013, 1(9); 56-67
1895-3794
2300-0376
Pojawia się w:
Zeszyty Naukowe Wyższej Szkoły Zarządzania Ochroną Pracy w Katowicach
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody zwalczania hałasu komunikacyjnego – badania eksperymentalne skuteczności ekranu akustycznego
Anti-noise methods in transport – acoustic screen effectiveness experimental research
Autorzy:
Burdzik, R.
Śmigalski, G.
Powiązania:
https://bibliotekanauki.pl/articles/198695.pdf
Data publikacji:
2013
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
ekran akustyczny
hałas komunikacyjny
redukcja hałasu
acoustic screen
traffic noise
noise reduction
Opis:
W artykule podjęto próbę analizy skuteczności ekranu akustycznego na przykładzie ekranów akustycznych zlokalizowanych w pobliżu autostrady A4. Badania wykonano na podstawie pomiarów redukcji poziomu hałasu komunikacyjnego przez określony ekran akustyczny. Wykorzystanie ekranów akustycznych do zwalczania hałasu nie jest jedyną znaną metodą. Wybór metody zależy m.in. od możliwość finansowych oraz zagospodarowania terenu.
An attempt to analyse the effectiveness of the acoustic screen on an example of the acoustic screens at the A4 highway has been made in this article. The research has been made basing on measurement of the specific acoustic screen’s traffic noise reduction. Anti-noise usage of acoustic screens is not the only known method. The choice of methods is based on variables such as financial possibilities or terrain management.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2013, 79; 31-38
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metod regularyzacji do filtracji zakłóceń pomiarowych rejestrowanych obrazów
Application of regularization methods to picture reconstruction
Autorzy:
Iwaniec, J.
Powiązania:
https://bibliotekanauki.pl/articles/156491.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
filtracja szumów
rekonstrukcja obrazu
regularyzacja
noise reduction
picture reconstruction
regularization
Opis:
Praca dotyczy zagadnienia redukcji szumów pomiarowych obrazów z zastosowaniem metod regularyzacji. W pracy przedstawiono rezultaty filtracji obrazu testowego (16×16 pikseli) przeprowadzonej przy użyciu metody regularyzacji Tichonowa, TSVD, DSVD oraz ME [1, 3]. Do rekonstrukcji obrazów o dużych rozmiarach zastosowano sformułowaną i zaimplementowaną przez autorkę iteracyjną przybliżoną metodę filtracji obrazów opartą o metody regularyzacji. Wykazano przydatność sformułowanych metod w przypadku obrazów, których rekonstrukcja nie jest możliwa do przeprowadzenia innymi metodami ze względu na zbyt dużą utratę informacji spowodowaną nałożeniem szumów.
In practical applications of signal processing, the problem of picture reconstruction on the basis of a recorded noisy picture is frequently encountered. Such a problem is an inverse, ill-posed problem (Fig. 1), which means that even small disturbances of the recorded picture have significant influence on the accuracy of picture reconstruction. Therefore, in this paper, for the purposes of pictures noise reduction, regularization methods were used. Noisy pictures were filtered by means of the Tikhonov regularisation [1, 3], Truncated SVD (TSVD) [1, 3], Damped SVD (DSVD) [1,3] and Maximal Entropy (ME) [1,3] methods. Noise reduction of the test picture of dimensions 16×16 pixels was carried out by means of the algorithm (Fig. 2) requiring decomposing matrix modelling noise into singular values, which, in case of pictures of significant dimensions, requires significant computational effort. Therefore, for the purposes of regularization of pictures of significant dimensions (512×512 pixels) the iterative approximate method (Fig. 3) formulated by the author was used. The method idea consists in application of the selected regularization method to regularization of the issue (1), where [A1(k)] is a matrix consisted of elements lying in the vicinity of the matrix [A] main diagonal, corresponding to the kth part of the considered picture written in the form of vector (Fig. 3). The obtained results prove that the formulated and implemented methods can be used for noise reduction of pictures, the reconstruction of which is impossible to carry out by means of other methods because of the excessive loss of information resulting from imposed noise.
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 1, 1; 86-89
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Time series denoising with wavelet transform
Autorzy:
Kozłowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/309048.pdf
Data publikacji:
2005
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
wavelet transform
WaveShrink
filtration
noise reduction
Haar basic wavelet function
Opis:
This paper concerns the possibilities of applying wavelet analysis to discovering and reducing distortions occurring in time series. Wavelet analysis basics are briefly reviewed. WaveShrink method including three most common shrinking variants (hard, soft, and non-negative garrote shrinkage functions) is described. Another wavelet-based filtering method, with parameters depending on the length of wavelets, is introduced. Sample results of filtering follow the descriptions of both methods. Additionally the results of the use of both filtering methods are compared. Examples in this paper deal only with the simplest "mother" wavelet function - Haar basic wavelet function.
Źródło:
Journal of Telecommunications and Information Technology; 2005, 3; 91-95
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hałas na statkach - przepisy i praktyka
Noise on ships- codes and practice
Autorzy:
Kuśmierek-Ochrymiuk, M.
Powiązania:
https://bibliotekanauki.pl/articles/179095.pdf
Data publikacji:
2008
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
hałas
statki
pomiar hałasu
ograniczenie hałasu
prawo
noise
ships
noise measurement
noise reduction
law
Opis:
W artykule przedstawiono aktualny stan przepisów i międzynarodowych regulacji w aspekcie ograniczenia hałasu na statkach morskich. Wskazano charakterystyczne źródła hałasu, podstawowe sposoby jego redukcji, a także scharakteryzowano nowoczesne, wieloetapowe podejście do zagadnienia. Zwrócono uwagę na problemy pojawiające się podczas pomiarów akustycznych zgodnie z istniejącymi procedurami oraz na tendencje w dziedzinie akustyki okrętowej w kontekście zdrowia i komfortu człowieka.
This article discusses the current state of codes and international regulations in the aspect of noise reduction on ships. Characteristic sources of noise and the main ways of reduction it are shown; a modern multi-stage approach to the problem is characterized as well. Attention is drawn to problems arising during acoustic measurements conducted according to procedures, and trends in ship acoustics in the context of human health and comfort.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2008, 9; 5-9
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies