Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "beamforming" wg kryterium: Temat


Tytuł:
A simulation of thinning of microphone array in near-field broadband beamformers
Autorzy:
Wielgus, Agnieszka
Szlachetko, Bogusław
Powiązania:
https://bibliotekanauki.pl/articles/2146656.pdf
Data publikacji:
2021
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
acoustics
beamforming systems
microphone array
thinning technique
akustyka
beamforming
macierz mikrofonów
technika przerzedzania
Opis:
This paper is devoted to the problem of designing an optimal microphone matrix. We define a criterion function where the performance of our matrix should be as close as possible to the desired one based on L2 norm. In the classical approach, increasing a size of the matrix is used to improve the system performance. However, in many cases it is not a good solution. In this paper we propose a solution based on thinning technique. We work with rectangular, equispaced microphone matrix and using metaheuristic approach called simulated annealing we optimise the set of active microphones (we switch off some of the microphones from the regular matrix). For illustrations, few numerical examples are solved. Comparing to the classical approach we show that thinning microphone matrix can significantly improve system performance.
Źródło:
Vibrations in Physical Systems; 2021, 32, 2; art. no. 2021204
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Golay Coded Sequences in Synthetic Aperture Imaging Systems
Autorzy:
Trots, I.
Tasinkevych, Y.
Nowicki, A.
Lewandowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/176941.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasound imaging
synthetic aperture
beamforming
radiation pattern
coded sequences
Golay codes
Opis:
The paper presents the theoretical and experimental study of synthetic transmit aperture (STA) method combined with Golay coded transmission for medical ultrasound imaging applications. The transmission of long waveforms characterized by a particular autocorrelation function allows to increase the total energy of the transmitted signal without increasing the peak pressure. It can also improve signal- to-noise ratio and increase the visualization depth maintaining the ultrasound image resolution. In the work the 128-element linear transducer array with 0.3 mm pitch excited by the 8 and 16-bits Golay coded sequences as well as a one cycle at nominal frequencies 4 MHz were used. The comparison of 2D ultrasound images of the tissue mimicking phantoms is presented to demonstrate the benefits of coded transmission. The image reconstruction was performed using synthetic STA algorithm with transmit and receive signals correction based on a single element directivity function.
Źródło:
Archives of Acoustics; 2011, 36, 4; 913-926
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-Element Synthetic Transmit Aperture in Medical Ultrasound Imaging
Autorzy:
Trots, I.
Nowicki, A.
Lewandowski, M.
Tasinkevych, Y.
Powiązania:
https://bibliotekanauki.pl/articles/177855.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasound imaging
synthetic aperture
beamforming
Opis:
Synthetic aperture (SA) technique is a novel approach to present day commercial systems and has previously not been used in medical ultrasound imaging. The basic idea of SA is to combine information acquired simultaneously from all directions over a number of emissions and to reconstruct the full image from these data. The paper presents the multi-element STA (MSTA) method for medical ultrasound imaging. The main difference with the STA approach is the use of a few elements in the transmit mode in contrast to a single element aperture. This allows increasing the system frame rate, decreasing the number of emissions, and provides the best compromise between the penetration depth and lateral resolution. Besides, a modified MSTA is proposed with a corresponding RF signal correction in the receive mode, which accounts for the element directivity property. In the experiments a 32-element linear transducer array with 0.48 mm interelement spacing and a burst pulse of 100 ns duration were used. Two elements wide transmission aperture was used to generate an ultrasound wave covering the full image region. The comparison of 2D ultrasound images of a tissue mimicking phantom obtained using the STA and MSTA methods is presented to demonstrate the benefits of the second one.
Źródło:
Archives of Acoustics; 2010, 35, 4; 687-699
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of the Multi-element Synthetic Transmit Aperture Method for Medical Ultrasound Imaging Applications
Autorzy:
Tasinkevych, Y.
Trots, I.
Nowicki, A.
Lewandowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/177208.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasound imaging
synthetic aperture
beamforming
Opis:
The paper presents the optimization problem for the multi-element synthetic transmit aperture method (MSTA) in ultrasound imaging applications. The optimal choice of the transmit aperture size is made as a trade-off between the lateral resolution, penetration depth and the frame rate. Results of the analysis obtained by a developed optimization algorithm are presented. The maximum penetration depth and lateral resolution at given depths are chosen as optimization criteria. The results of numerical experiments carried out in MATLAB Ž using synthetic aperture data of point reflectors obtained by the FIELD II simulation program are presented. The visualization of experimental synthetic aperture data of a tissue mimicking phantom and in vitro measurements of the beef liver performed using the SonixTOUCH Research system are also shown.
Źródło:
Archives of Acoustics; 2012, 37, 1; 47-55
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wave Generation by a Finite Baffle Array in Application to Beam-Forming Analysis
Autorzy:
Tasinkevych, Y.
Powiązania:
https://bibliotekanauki.pl/articles/177857.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
phased array
beamforming
mixed boundary value problem
BIS expansion
Opis:
Directional excitation of sound in an aperiodic finite baffle system is analyzed using a method developed earlier in electrostatics. The solution to the corresponding boundary value problem is obtained in the spatial-frequency domain. The acoustic pressure and normal particle velocity distribution in acoustic media can be easily computed by the inverse Fourier transform from their spatial spectra on the baffle plane. The presented method can be used for linear acoustic phased arrays modeling with finite element size and inter-element interactions taken into account. Some illustrative numerical examples presenting the far-field radiation pattern and wavebeam steering are given.
Źródło:
Archives of Acoustics; 2010, 35, 4; 677-686
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototype measurement system for localization of partial discharges sources – microphone array
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/97228.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
partial discharges (PDs)
PD localization
sensor array
microphone array
beamforming
direction-of-arrival (DOA)
Opis:
This paper presents a prototype measurement system, that will be used for localization of acoustic emission sources originating from partial discharges (PD). It is based on sensor arrays technology and direction of arrival estimation algorithms. Acoustic signals will be received with a universal linear array (ULA) of sensors, wherein the sensory elements are microphones operating in the audible frequency range. For the estimation of the direction of arrival of these signals conventional beamforming algorithm is used which has also been described theoretically. Ultimately, the system will be used to determine the direction of arrival of the acoustic signal generated by the insulation defect, which is corona discharge.
Źródło:
Computer Applications in Electrical Engineering; 2015, 13; 209-219
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototypowy układ pomiarowy do lokalizacji źródeł emisji akustycznej - matryca mikrofonów
Prototype measurement system for localisation of partial discharges sources – microphone array
Autorzy:
Polak, F.
Sikorski, W.
Siodła, K.
Powiązania:
https://bibliotekanauki.pl/articles/376647.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
wyładowania niezupełne
lokalizacja źródeł sygnałów
matryca sensorowa
estymacja kierunku nadejścia sygnału (DOA)
kształtowanie wiązki
beamforming
Opis:
W pracy zaprezentowany został prototypowy układ pomiarowy służący do lokalizacji źródeł sygnałów dźwiękowych, pochodzących od wyładowań niezupełnych, opierający się na technologii matryc sensorowych oraz algorytmów estymacji kierunku nadejścia sygnałów. Sygnały akustyczne odbierane są przy pomocy liniowej matrycy sensorów, w której elementami sensorycznymi są mikrofony pracujące w zakresie częstotliwości słyszalnych. Do estymacji kierunku nadejścia tych sygnałów użyto klasycznego algorytmu kształtowania wiązki, którego założenia teoretyczne zawarto w pracy. Docelowo układ będzie służył do określania lokalizacji źródła sygnałów akustycznych generowanych przez wyładowanie ulotowe.
This paper presents a prototype measurement system, that will be used for localisation of acoustic emission sources. It is based on sensor arrays technology and direction of arrival estimation algorithms. Acoustic signals will be received with a universal linear array (ULA) of sensors, wherein the sensory elements are microphones operating in the audible frequency range. For the estimation of the direction of arrival of these signals conventional beamforming algorithm is used which has also been described theoretically. Ultimately, the system will be used to determine the direction of arrival of the acoustic signal generated by the insulation defect, which is corona discharge.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2015, 84; 207-214
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new mutual coupling compensation method for receiving antenna array-based DOA estimation
Autorzy:
Parhizgar, N.
Powiązania:
https://bibliotekanauki.pl/articles/141040.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
antenna array
beamforming
compensation matrix
DOA estimation
mutual coupling
MUSIC algorithm
Opis:
Most receiving antenna arrays suffer from the mutual coupling problem between antenna elements, which can critically influence the performance of the array. In this work, a novel and accurate form of compensation matrix is applied to compensate the mutual coupling in a uniform linear array (ULA). This is achieved by applying a new method based on solving a boundary value problem for the whole ULA. In this method, both self and mutual impedances are exploited in an accurate characterization of mutual impedance matrix which results in a perfect mutual coupling compensation method, and hence a very accurate direction of arrival (DOA) estimation. In the new scheme, the compensation matrix is obtained by using the relationship between measured voltage and theoretical coupled voltage based on the MOM. Numerical results show that using DOA estimation algorithms to the decoupled voltage obtained by using this method leads to an excellent performance of DOA estimation with higher accuracy and resolution.
Źródło:
Archives of Electrical Engineering; 2018, 67, 2; 419--431
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An embedded beamformer for a PID-based trajectory sensing for an autonomous vehicle
Autorzy:
Mvemba, P. K.
Lay-Ekuakille, A.
Kidiamboko, S.
Rahman, M. Z. U.
Powiązania:
https://bibliotekanauki.pl/articles/221802.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
autonomous vehicle
beamforming
trajectory follower
ultrasonic obstacle detector
measurement
sensors
Opis:
Beamforming is an advanced signal processing technique used in sensor arrays for directional signal transmission or reception. The paper deals with a system based on an ultrasound transmitter and an array of receivers, to determine the distance to an obstacle by measuring the time of flight and - using the phase beamforming technique to process the output signals of receivers for finding the direction from which the reflected signal is received - locates the obstacle. The embedded beam-former interacts with a PID-based line follower robot to improve performance of the line follower navigation algorithm by detecting and avoiding obstacles. The PID (proportional-integral-derivative) algorithm is also typically used to control industrial processes. It calculates the difference between a measured value and a desired set of points, then attempts to minimize the error by adjusting the output. The overall navigation system combines a PID-based trajectory follower with a spatial-temporal filter (beamformer) that uses the output of an array of sensors to extract signals received from an obstacle in a particular direction in order to guide an autonomous vehicle or a robot along a safe path.
Źródło:
Metrology and Measurement Systems; 2018, 25, 3; 561-575
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Obrazowanie akustyczne - zalety i możliwości zastosowania w zwalczaniu zagrożenia hałasem
Sound visualization - advantages and applications in fighting the hazard of noise
Autorzy:
Morzyński, Leszek
Swidziński, Adam
Štramberský, Radek
Pavaluca, Paula
Powiązania:
https://bibliotekanauki.pl/articles/2202837.pdf
Data publikacji:
2021
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
hałas
obrazowanie akustyczne
wizualizacja dźwięku
kamera akustyczna
noise
sound visualization
acoustic camera
beamforming
Opis:
Identyfikacja źródeł hałasu jest jednym z istotnych elementów procesu ograniczania tego zagrożenia w środowisku pracy. Umożliwia wskazanie dominującego źródła hałasu oraz ułatwia dobór rozwiązań i środków technicznych mających na celu jego ograniczanie. Identyfikacja źródeł hałasu z zastosowaniem tradycyjnych technik pomiarowych i przyrządów pomiarowych z pojedynczym mikrofonem czy sonda natężeniowa jest czasochłonne, a w wielu przypadkach bardzo trudne. Odwzorowanie parametrów pola akustycznego w postaci graficznej znakomicie ułatwia proces lokalizacji źródeł energii akustycznej oraz dróg jej propagacji. Obrazowanie akustyczne, inaczej wizualizacja dźwięku, jest graficzną formą prezentacji zjawisk akustycznych, w której parametry emitowanego hałasu przedstawiane są w postaci barwnej mapy nałożonej na obraz jego źródła. W artykule omówiono jedną z podstawowych technik obrazowania akustycznego, jaką jest beam forming, oraz urządzenia do obrazowania akustycznego z zastosowaniem tej techniki, czyli kamery akustyczne. Na przykładach wyników badań laboratoryjnych i w warunkach rzeczywistych przedstawiono zalety i możliwości wykorzystania tej techniki oraz jej ograniczenia.
Identification of noise sources is one of the important elements of the process of reducing noise hazards in the work environment. It enables the indication of the dominant noise source and facilitates the selection of solutions and technical measures aimed at reducing it. Identifying noise sources using traditional measurement techniques and measuring instruments with a single microphone or intensity probe is time consuming and in many cases very difficult. Graphical mapping of acoustic field parameters greatly facilitates the process of locating sources of acoustic energy and its propagation paths. Sound visualization, is a graphic form of presentation of acoustic phenomena, in which the parameters of the emitted noise are presented in the form of a color map superimposed on the image of its source. The article discusses one of the basic techniques of acoustic imaging, which is beam forming, and acoustic imaging devices using this technique, i.e. acoustic cameras. The advantages and possibilities of using this technique, as well as its limitations, are discussed on the basis of measurement results carried out in laboratory and in real conditions.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2021, 12; 18-23
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sound recording with the application of microphone arrays
Autorzy:
Kornatowski, E.
Powiązania:
https://bibliotekanauki.pl/articles/97513.pdf
Data publikacji:
2011
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
sound recording
array microphone
beamforming
microphone
Opis:
In this article the issues concerning sound recording with the use of three-dimensional systems of several microphones were considered. The issues under study concern the so called beamforming, which is modeling three-dimensional directivity patterns of microphone arrays, as well as modern technologies of multichannel recording production with the purpose of reproduction in surround sound systems.
Źródło:
Computer Applications in Electrical Engineering; 2011, 9; 213-222
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital Signal Processing Approach in Air Coupled Ultrasound Time Domain Beamforming
Autorzy:
Herman, K.
Gudra, T.
Furmankiewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/177033.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beamforming
air-coupled ultrasounds
DSP
digital signal processing
bat signals
direction of arrival
Opis:
The work presents the results of experimental study on the possibilities of determining the source of an ultrasonic signal in two-dimensional space (distance, horizontal angle). During the research the team used a self-constructed linear array of MEMS microphones. Knowledge in the field of sonar systems was utilized to analyse and design a location system based on a microphone array. Using the above mentioned transducers and broadband ultrasound sources allows a quantitative comparison of estimation of the location of an ultrasonic wave source with the use of broadband modulated signals (modelled on bats’ echolocation signals) to be performed. During the laboratory research the team used various signal processing algorithms, which made it possible to select an optimal processing strategy, where the sending signal is known.
Źródło:
Archives of Acoustics; 2014, 39, 1; 37-50
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Review of Distributed Beamforming
Autorzy:
Her, J.
Wysoki, T. A.
Wysoki, B. J.
Powiązania:
https://bibliotekanauki.pl/articles/309541.pdf
Data publikacji:
2011
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
beamforming
distributed antenna array
smart antenna
virtual array
Opis:
As the capabilities of individual nodes in wireless sensor networks increase, so does the opportunity to perform more complicated tasks, such as cooperative distributed beamforming to improve the range of communications and save precious battery power during the transmission.This work presents a review of the current literature focused on implementing distributed beamformers; covering the calculation of ideal beamforming weights, practical considerations such as carrier alignment, smart antennas based on distributed beamformers, and open research problems in the field of distributed beamforming.
Źródło:
Journal of Telecommunications and Information Technology; 2011, 1; 78-88
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wideband beamformer in the frequency domain
Autorzy:
Elminowicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/332683.pdf
Data publikacji:
2003
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
acoustics
wideband sonar
beamforming
Opis:
In modern high resolution wideband sonars using linear array, beamforming constitutes one of the most difficult problems. This paper presents a new efficient method of beamforming in the frequency domain. Applying fast Fourier transforms: to transfer into the frequency domain - temporal FFT (TFFT); to make spatial filtration spatial FFT (SFFT) and to transfer from the frequency domain - inverse FFT (IFFT), as well as fast convolution in the frequency domain correlating the conjugated and corrected replicas for each beam with picked up samples of SFFT for each frequency and each beam we obtain a processing that is less calculations burdened than other known processing algorithms.
Źródło:
Hydroacoustics; 2003, 6; 235-242
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of a high-resolution real-time-capable 3D SONAR camera for deep sea operation
Autorzy:
Ehrhardt, M.
Becker, F. J.
Speicher, D.
Fonfara, H.
Hewener, H.
Degel, C.
Tretbar, S.
Powiązania:
https://bibliotekanauki.pl/articles/332135.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
2D array
matrix array
3D imaging
beamforming
Opis:
Within this work we present a first experimental setup of a high-resolution real-timecapable 3D sonar camera system for deep sea operation. Since we are currently in the development process, the focus of this work is on the transmission aspects of the camera. Following publications will include the receiving aspects as well as the first phantom reconstructions. The system consists of a 1024 element matrix array antenna, together with a 128 channel beamforming system including a 1:8 multiplexing device for each channel. The camera is supposed to deliver volumetric images within a range of up to 15 m in a deep sea environment up to 6000 m depth. The antenna provides the advantage of an adjustable defocused transmitting sound field. This allows dynamic control of the field of view, and an increase of the image contrast for a specific region.
Źródło:
Hydroacoustics; 2016, 19; 101-110
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies