Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "fuels" wg kryterium: Temat

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 145
Tytuł:
Transestrification of biofuel, yes but why?
Autorzy:
Sitnik, L. J.
Powiązania:
https://bibliotekanauki.pl/articles/242003.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
diesel engines
fuels
alternative fuels
biofuel
Opis:
This paper presents a novel way of utilizing alcohols as fuels for a diesel engine. It is proposed to use heavy alcohols as a mix with vegetable oils and conventional diesel fuel. It is presented the another way to use alcohols. Namely, the use of heavy alcohols as a solvent for vegetable oil (named the biomix or BM) and after the obtainment of the thickness, which would be approximate to diesel fuel, mixing the biomix with diesel fuel to obtained biomix diesel (BMD). This solution will be shown for example with butanol as heavy alcohol, rape oil as vegetable oil and conventional diesel fuel. The investigations are carried out with a simple diesel engine on the engine test bed. Main parameters of engine (power output, torque, specifically fuel consumption) and the main exhaust gas component (in this case CO, NOx, PM) will be investigated. There were better results achieved than one expected. Opposed to existing experiences, the maximum of power output and the torque of engine are higher in the whole range of the rotatory speed of the engine crankshaft when the engine biomix diesel (BMD) is reinforced. The addition of the component biomix to fuel influences the specific fuel consumption. Generally with the larger part of the component biomix the specific fuel consumption grows. Because the power of engine also grows up one should expect that in exploitation the specific fuel consumption should not increase. Transestrification process in the proposed solution does not appear. This has large economic meaning. The investment amount (the transestrification plant) is not necessary. The power consumption to get fuel is lower. Vegetable oils are fully used (glycerine is not produced). BMD has stable parameters. The usage of existing infrastructure to this transportation is enough. Very important is that this fuel could be used to reinforce old, existing now and the future diesel engines. The production of butanol is known. It will be interesting to use for the production an electrolysis process, especially in the proposed new plant where the electrolysis process is connected with the process to get the electrical energy from byproducts of electrolysis (i.e. hydrogen and oxygen) in the fuel cell. It seems to be more efficient. The possibility to get butanol from ethanol gives a very good perspective for the use of ethanol from today's overproduction and moreover without the essential change of infrastructure.
Źródło:
Journal of KONES; 2008, 15, 4; 537-544
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wpływu dodatku biowęglowodorów w paliwie na wybrane parametry procesu spalania w silniku o zapłonie samoczynnym
Estimation of combustion process parameters in a diesel engine supplied with a mixture of gas oil and synthetic fuels
Autorzy:
Lotko, Wincenty
Łodygowski, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/316946.pdf
Data publikacji:
2019
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
paliwa alternatywne
paliwa syntetyczne
silnik ZS
alternative fuels
synthetic fuels
diesel engine
Opis:
W artykule omówiony został wpływ dodatku biowęglowodorów na wybrane parametry spalania silnika o zapłonie samoczynnym. Badania wykazały, że syntetyczny olej napędowy może być wykorzystywany jako dodatek do mineralnego oleju napędowego. Proces spalania takich mieszanin zależy od ich składu. Użycie SYNON prowadzi do zwiększenia prędkości narastania ciśnienia w komorze spalania.
The paper presents test results carried out with using of CI engine fuelled with diesel oil and synthetic fuels. Research results show that SYNON be used in diesel fuel. Combustion proces of such fuel blends depend on mixture composition. Using of SYNON in mixture with diesel oil follows to increase a value of maximium pressure rise in cumbustion chamber.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2019, 20, 1-2; 309-312
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of unburnt hydrocarbon emissions for diesel engines fueled by diesel oil and rapeseed fuel
Autorzy:
Rusin, M.
Powiązania:
https://bibliotekanauki.pl/articles/245894.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
CI internal combustion engines
motor fuels
alternative fuels
toxic exhaust emissions
Opis:
The article presents the results of the of the HC emissions composition for the compression ignition - diesel engine fuelled with rapeseed fuel (a mixture of methyl esters of fatty acids - RSME). The investigations were conducted on a turbocharged, four-cylinder compression-ignition engine type T370 (of 80 hW power at 2400 rpm engine speed and maximum torque of 400 Nm at 1440 rpm engine speed, with bore/stroke 110 mm /l20 mm, displacement volume 4560 cm3, compression ratio 17). For the exhaust toxicity investigations the eauipment of Signal and AVL companies was used, and for composition of nonregulated hydrocarbons emissions investigations the Hewlett Packard Company chromatograph type HP-5890II was used. The investigations were conducted under engine full load at maximum torque speed and for engine rotational speed of the rated power. Chromatographic test for emissions were collected using special equipment and special procedures. The article presents the results of chromatographic investigations focusedon: benzene, toluene and acetaldehyde. It was found that the percentage of emission of individual components in the total emissions of HC was independent of the fuel used. However, due to the fact that in the case of rape fuel, emission of unburned HC was smaller and smaller were the absolute amounts of emissions components. Thus, emissions from combustion of rape fuel are less harmful than emissions from the engine fuelled with diesel oil.
Źródło:
Journal of KONES; 2009, 16, 4; 549-555
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Swedish Urban Transport Model Powered by Biomethane
Autorzy:
Żółtowski, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/504088.pdf
Data publikacji:
2019
Wydawca:
Międzynarodowa Wyższa Szkoła Logistyki i Transportu
Tematy:
urban transport
alternative fuels
biomethane
Opis:
In the recent years, the European Community has been implementing a plan to increase the share of renewable fuels used for energy production and powering vehicles. It aims to partially reduce the dependence on crude oil imports and reduce CO2 emission. Particularly interesting are the achievements of Sweden against this background, for which the European Commission has set the highest value of the indicator, and to implement which Sweden adopted unconventional solutions across Europe. One of them is the plan to eliminate by the 2030 fossil fuels from the urban transport, and one of the fuels that is to replace today still widely used diesel oil, would be biomethane. The article describes the reasons and circumstances which made Sweden use biomethane to power buses used in urban transport on a very large scale, in comparison with other European countries. The article shows the characteristics of this fuel, the method of its production and application prospects.
Źródło:
Logistics and Transport; 2019, 41, 1; 137-143
1734-2015
Pojawia się w:
Logistics and Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary investigation of a gaseous fuel composition influence on spark ignition engine performance
Badania wstępne wpływu składu mieszanin paliw gazowych na parametry pracy silnika o zapłonie iskrowym
Autorzy:
Górniak, A.
Trzmiel, K.
Włostowski, R.
Wróbel, R.
Powiązania:
https://bibliotekanauki.pl/articles/133057.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
alternative fuels
gaseous fuels
gas engine control
paliwa alternatywne
paliwo gazowe
sterowanie silnikiem gazowym
Opis:
This paper constitutes a performance comparison of an engine fed with various mixture of gases which can be expected as a product of biomass gasification – i.e. hydrogen, carbon dioxide, carbon monoxide, and methane. The share of those components is dependent mainly upon the gasification process, and the gasified fuel type. For this reason the test station was designed for easy change of the gas mixture composition. Here, a set of various 12 gas mixtures was taken into account for the evaluation of the engine power, cylinder temperature and fuel consumption. Statistically elaborated influence of the gas fuel composition on the parameters of engine performance constitutes the basis for the selection of the best engine, optimization of engine’s adjustments as well as development of the control algorithm for a gasification unit.
Artykuł stanowi porównanie parametrów pracy silnika o zapłonie iskrowym zasilanego mieszaniną gazów powstałych, jako produkty procesów zgazowania biomasy – tj. wodór, tlenek i dwutlenek węgla oraz metan. Udział poszczególnych gazów jest zależny w głównej mierze od procesu zgazowania oraz od rodzaju paliwa, które podlega zgazowaniu. Stanowisko pomiarowe umożliwia dowolną kompozycję składu paliwa gazowego. Badano wpływ 12 mieszanin gazowych na parametry użytkowe silnika spalinowego, m.in. na temperaturę gazów wylotowych i zużycie paliwa. Opracowany statystycznie wpływ składu mieszaniny gazowej na parametry pracy silnika stanowić będzie podstawę do doboru optymalnych nastaw i opracowanie algorytmu sterującego jednostką ECU.
Źródło:
Combustion Engines; 2015, 54, 3; 683-687
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regulation of public charging stations in proposed Polish law on electromobility and alternative fuels
Autorzy:
Podmiotko, S.
Powiązania:
https://bibliotekanauki.pl/articles/101762.pdf
Data publikacji:
2017
Wydawca:
Instytut Polityki Energetycznej im. Ignacego Łukasiewicza
Tematy:
energy policy
e-mobility
alternative fuels
Opis:
Transport, as the core of the regional, national, and, undoubtedly, global economies, requires for undisturbed functioning a developed infrastructure; places where vehicles can be fueled, especially filling stations, are one of the most essential elements of this infrastructure. Electromobility, which is certainly becoming step by step the future of the wholly understood transport sector, will also need, like conventional transport, a specific infrastructure which will permit the refueling of electro-vehicles, too. Easily accessible public charging stations seem to be the most important element in developing electromobility in common transport. To assure such, complex legal regulations are necessary. The Polish legislature has responded to this necessity and is now pursuing work on laws regarding electromobility and alternative fuels. This article has two main emphases - analyze the proposed regulations in the matter of public charging stations and pinpoint the principal tasks in this score. The author hopes that this article will initiate larger interest in this developing institution in Poland.
Źródło:
Energy Policy Studies; 2017, 1 (1); 27-34
2545-0859
Pojawia się w:
Energy Policy Studies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ecological and Financial Effects of Coal-Fired Boiler Replacement with Alternative Fuels
Autorzy:
Proszak, Danuta
Rabczak, Sławomir
Rybak-Wilusz, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/124097.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
alternative fuels
coal-fired boiler
biomass
Opis:
Nowadays, much attention is paid to the elimination of heat sources poisoning our environment. The air pollution is the most dangerous form of pollution of the environment, due to its direct impact on all living organisms, coverage of large areas and easy movement of pollutants. Therefore, air protection is one of the priority directions of each voivodeship. Hence, many programmes are being developed to promote the replacement of the old heating devices with the new ones and the installation of renewable energy conversion devices. There is no doubt that the equipment which emits the most harmful compounds into the atmosphere includes the old boilers fired with coal, wood or wood chips. In winter, chimneys with black circular smoke are a frequent sight. This problem can only be solved by connecting houses to the public heating network or by removing the old stoves. In this publication, an analysis of the profitability of boiler replacement with coal was carried out in terms of the material and environmental benefits. It is proposed to replace this boiler with a pellet boiler, an eco-pea boiler and a gas condensing boiler. The boilers were selected on the basis of the calculated thermal output, which is equal to 18.56 kW.
Źródło:
Journal of Ecological Engineering; 2020, 21, 1; 1-7
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of different vehicles driyen by alternative fuels and hybrid driveline focusing on emission, efficiency and economy
Autorzy:
Pezsa, N.
Szabó, B.
Trencseni, B.
Powiązania:
https://bibliotekanauki.pl/articles/245618.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
hybrid vehicles
alternative fuels
payback time
Opis:
Air pollution is becoming an important issue in big towns, inparticular in city centres, where the density of traffic is high. Both, passenger cars and commercial vehicles are responsible for air quality. In the last decades more and more transportation companies changed their conventional vehicles into any kind of alternative vehicles. The aim of this paper is to investigate the economic and environmental effects of introducing alternative fuels and power trains in cargo vans. All of the simulated vehicles were equipped with internal combustion engines, but they are operating with different fuels. Gasoline, methane, ethanol and hydrogen fuels are used in these engine models. Conventional and hybrid powertrains are compared too. Only the gasoline fuelled engine is simulated with hybrid driveline besides the conventional ones. Both micro- and full-hybrid vehicles are modelled. Instead of dynamical analysis we focused on efficiency and emission therefore tests drive cycles were simulated. There were cycles defined by standards, like NEDC drive cycle. An individual cycle was recorded on a given route at different times of the day; the vehicle was driven along the planned path and the speed profile was recorded. As a result we could compare the different vehicles from the point of view of emission, fuel consumption and efficiency. In order to validate the simulation results laboratorial measurements were carried out. We also aimed at developing a business model capable ofanalysing the economical effects of alternative fuel and powertrain use. Generally it can be stated that the application of any alternative technology means additional costs (investment) at the beginning for the user. The investment is just worth the money if lower operational costs can be achieved. Achieved savings were calculated with our model and a sensitivity analysis was also performed.
Źródło:
Journal of KONES; 2009, 16, 3; 301-309
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative study of fuel injection at common rail system using different types of fuel
Autorzy:
Ustrzycki, A.
Kuszewski, H.
Powiązania:
https://bibliotekanauki.pl/articles/246175.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
common rail
fuel injection
alternative fuels
Opis:
In recent years the use of alternative fuels based, among other things, on vegetable oil is causing increasing concern, which is also observed in our country. Such fuels have different physical and chemical properties (especially viscosity) with reference to the standard diesel fuel. Therefore it is important to know the effect of the additive of biocomponents on fuel injection process, in particular of its parameters, which play an important role in the combustion process and formation of pollutions in exhaust gases. In the paper is presented the test results of selected parameters of the injection process executing by four different electromagnetically controlled injectors using diesel fuel without the biocomponents and mixtures of such fuel with esters of rapeseed oil (FAME). Investigations were carried out on a specially prepared test stand which enables the measurement of fuel delivery and fuel returning from the injector together with its density and temperature. Additionally, beside mentioned parameters, there were recorded high-speed courses of pressure in the high-pressure pipe behind the rail and before the injector. Next, using a system of AVL Visioscope, the fuel injection into the visualization chamber filled with fuel was recorded. It determined the basic parameters of the fuel spray. The aim of this study was to determine the impact of fuel type on the injection process executed by the injectors with different constructional parameters.
Źródło:
Journal of KONES; 2011, 18, 3; 493-498
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical research on the fuel injection into a diesel engine for diesel fuel, RME and rape oil
Autorzy:
Cisek, J.
Powiązania:
https://bibliotekanauki.pl/articles/246486.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
alternative fuels
rapeseed oil
injection
visualization
Opis:
The paper presents the results of the research on the influence of diesel fuel, rape oil methyl esters and rape oil on the evolution of the jet, velocity of the jet front and the atomization/spraying apex angle versus the crank angle of the engine. Measuring was performed using a single-cylinder Diesel engine with direct fuel injection and the apparatus AVL Engine VideoScope. It was found that physical and chemical parameters diversifying the tested fuels significantly influence the parameters of the sprayed fuel jet. It applied mainly to the increase of the fuel atomization apex angle for the fuels of high viscosity as compared with diesel fuel and to different course of the range and velocity of the jet front versus the engine crank angle. Large and heavy drops of vegetable oil have initially higher velocity than for diesel fuel. However, very soon, the velocity of rape oil jet front decreases to a lower value than for the petroleum fuel. From the visualisation process we can observed real start of injection and combustion processes. From these measure - delay of self combustion in diesel engine. Delay of self-combustion for natural rapeseed oil is shorter than for standard diesel fuel. As a result of this fact, we can observe in next research lower combustion dynamic, lower max. combustion temperature and lower concentration of NOx in exhaust gases. A change of the organization of the injection process of tested fuels can bring on differences in the combustion course.
Źródło:
Journal of KONES; 2012, 19, 3; 65-73
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania rozwoju i przebiegu procesu spalania alternatywnych paliw gazowych i ich mieszanek z wodorem w silniku ZI
An investigation on initiation and course of combustion process in SI engine fueled with alternative gas fuels and its hydrogen blends
Autorzy:
Kubica, G.
Powiązania:
https://bibliotekanauki.pl/articles/197253.pdf
Data publikacji:
2008
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
silnik ZI
paliwa gazowe
paliwa alternatywne
proces spalania
SI engine
gaseous fuels
alternative fuels
combustion process
Opis:
W opracowaniu przedstawiono wyniki badania wpływu rodzaju paliwa na przebieg spalania w silniku ZI. Wyselekcjonowana grupa paliw obejmowała alternatywne paliwa gazowe: LPG, CNG oraz mieszanki metanu z wodorem i benzynę bezołowiową 95 jako paliwo bazowe. Obiektem badań był silnik ZI, oznaczony kodem X16SZR w samochodzie Opel Astra I. Przeprowadzone badania obejmują pomiary ciśnienia indykowanego na stanowisku hamownianym oraz szczegółową analizę przemian termodynamicznych, zachodzących w zamkniętej komorze spalania. Analizy składników bilansu energii dokonano wykorzystując program o nazwie "EnComTwo", który realizuje założenia matematycznego modelu dwustrefowego. Analizie poddano poszczególne fazy procesu spalania ze szczególnym zwróceniem uwagi na takie aspekty, jak: zmiany ciśnienia indykowanego, przebieg wydzielania energii w trakcie spalania, długość procesu spalania i czas spalania ładunku.
The results of research an influence of fuel kind on combustion process in SI engine are presented in this paper. Selected fuels group include alternative gas fuels: LPG, CNG, hydrogen - CNG blends and unleaded gasoline 95 as a base fuel. SI engine X16SZR in Opel Astra I was investigated. The leaded tests include measurement results of dynamometer chassis test, as well as the detailed analysis of thermodynamic processes inside closed chamber. The aplication "EnComTwo", which resolves assumptions of mathematical model, was used in analysing of engine thermal balance. Combustion process was investigated in each of individual phases: initiation, dynamical combustion and flame extinguish. The most important parameters were: indicated pressure, heat released, combustion duration and time of combustion.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2008, 64; 159-166
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości i konsekwencje zastosowania zawiesiny węglowo-wodnej jako paliwa alternatywnego do zasilania silników Diesla
The possibilities and consequences of the use of coal-water slurry as an alternative fuel to power diesel engines
Autorzy:
Borkowski, J.
Szada-Borzyszkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/314444.pdf
Data publikacji:
2014
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
spalanie paliw
paliwa alternatywne
paliwa węglowo-wodne
silnik Diesla
emisja substancji szkodliwych
combustion of fuels
alternative fuels
coal-water fuels
diesel engine
emission of harmful substances
Opis:
W artykule omówione zostały zagadnienia spalania paliw w silnikach samochodowych a w szczególności w silnikach Diesla. Zwrócono również uwagę na zagrożenia dla środowiska naturalnego wynikające ze spalania paliw w silnikach samochodowych. Omówiono czynniki jakie powinno spełniać paliwo alternatywne stosowane do zasilania silników. Przedstawiono rodzaje paliw alternatywnych stosowanych obecnie do zasilania współczesnych samochodów. Szczególną uwagę poświęcono możliwościom zastosowania zawiesiny węglowo-wodnej jako paliwa alternatywnego do zasilania silników Diesla. Jednak stosowanie takiego paliwa węglowo-wodnego narzuca konieczność dokonania niezbędnych modyfikacji konstrukcyjnych silnika oraz jego osprzętu. Scharakteryzowano właściwości takiej zawiesiny (wielkość ziaren węgla, lepkość i stabilność) oraz korzyści jakie mogą wynikać z zastosowania nowego rodzaju quasi-płynnego paliwa alternatywnego.
The paper presents some problems concerning fuel burning in vehicles’ engine especially including diesel one. Environmental risk aspects are given as a consequence of burning processes and basing on that one can find a description of factors defining such kind of alternative fuel too. Different kind of such alternative fuels are presented in the paper, especially possibilities of coal-water slurry application for diesel engine are discussed in. One should also have in mind that application of such coal-water fuel forces necessity of engine construction and adequate equipment modification. Characteristics of such slurry (coal grains’ size, viscosity and stability) as well as advantages that may occur in consequence of its usage are finally described in.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2014, 15, 6; 72-75
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New European biofuels for diesel engines
Autorzy:
Sitnik, L. J.
Powiązania:
https://bibliotekanauki.pl/articles/243532.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
combustion engines
alternative fuels
biofuels
butanol
Opis:
The World is strongly dependent on crude oil for its transport needs. In order to diminish this dependence, we need to introduce clean, CO2-efficient, secure and affordable transportation fuels. The development of innovative biofuel technologies will help to cover significantly (up to 25% in Europe) road transport fuel needs. Biofuels production of 33 billion litres in 2004 is small compared to 1200 billion litres of gasoline produced annually worldwide. The current production of liquid biofuels in the EU 25 is about 2 Mtoe, which is less than 1% of the market. Recent assessments have concluded that the 2010 targets, 18 Mtoe used in the transport sector, are unlikely to be achieved. There can be three basic possibilities of accomplishing this target: i) use of alcohols (first of all ethanol) and their mixing with petrol; ii) use of fatty acids esters (methyl or ethyl) of vegetable oils and their mixing with diesel fuel, iii) use of synthetic hydrocarbons of the synthetic gas coming from biomass resources and eventually their mixing with other ,,classical" hydrocarbons. This paper presents a novel way of utilizing alcohols as fuels for a diesel engine. It is proposed to use heavy alcohols as a mix with conventional diesel fuel. The possibility to use a mix of butanol (as heavy alcohol) with conventional diesel fuel is demonstrated. Butanol has some key advantages over ethanol and light hydrocarbons (petrol), including higher energy content and better transport characteristics. Moreover, butanol is hydrophobic, so a new logistic infrastructure is not necessary. This paper demonstrates that a diesel-butanol fuel mixture is supplied to a diesel engine without any problems. A consumption of proposed biofuel mixture from +35% to -35% of typical diesel fuel depends on many factors not only on fuel energy density. A near-term effort of BP Biofuels and DuPont to develop and commercialize biobutanol is well-known. Here, it is proposed a new technological process combining electricity generation in fuel cells with electrolysis and a production of butanol from ethanol, which gives an opportunity to reduce today,'s over production of ethanol without a necessary change of existing infrastructure.
Źródło:
Journal of KONES; 2008, 15, 3; 487-491
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance and emission characteristic of miniature turbojet engine FED Jet A-1/alcohol blend
Autorzy:
Gawron, B.
Białecki, T.
Dzięgielewski, W.
Kaźmierczak, U.
Powiązania:
https://bibliotekanauki.pl/articles/244998.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
miniature jet engine
alternative fuels
exhausts emission
Opis:
This paper presents differences between fossil fuel (Jet A-1) and alcohol/Jet A-1 blend, during combustion process using laboratory test rig with miniature turbojet engine (MiniJETRig). The test rig has been created in Air Force Institute of Technology for research and development works aimed at alternative fuels for aviation. Fuel from different feedstock (non-fossil sources) is introduced into market due to ecological aspects, fuel price stability and energy security. Application of alcohol to propel aircraft has started form using a blend of aviation gasoline with ethanol in spark-ignited internal-combustion engines. Taking into account that large part of aviation fuels used by commercial aircraft is jet fuels, so in this area it has begun to look for possibilities to apply alcohol component. In 2016, international standard (ASTM) approved a synthetic blending component for aviation turbine fuels for use in civil aircraft and engines – alcohol-to-jet synthetic paraffinic kerosene (ATJ-SPK). According to standard, ATJ-SPK synthetic blending components shall be comprised hydro processed synthetic paraffinic kerosene wholly derived from isobutanol processed through dehydration, oligomerization, hydrogenation and fractionation. Two different fuel samples, a traditional fossil jet fuel (Jet A-1) and a blend of 10% butanol with Jet A-1 were tested. Laboratory tests of selected physicochemical properties and bench tests with the same profile of engine test were carry out for both fuel samples. The obtained results: engine parameters and exhaust gas emissions are compared and discussed.
Źródło:
Journal of KONES; 2016, 23, 1; 123-129
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza możliwości produkcji i spalania paliw alternatywnych w warunkach Śląska
Analysis of capability of production and incinerating of alternative fuel in Silesian conditions
Autorzy:
Białecka, B.
Powiązania:
https://bibliotekanauki.pl/articles/340164.pdf
Data publikacji:
2004
Wydawca:
Główny Instytut Górnictwa
Tematy:
paliwa alternatywne
energetyka
gospodarka odpadami
paliwa z odpadów
alternative fuels
power engineering
waste management
fuels from wastes
Opis:
Problemem cywilizacji przemysłowej jest nadprodukcja odpadów. W Polsce dotyczy to szczególnie Górnego Śląska, gdzie nakładają się problemy związane z zagospodarowaniem odpadów komunalnych i przemysłowych, w tym powęglowych. Oszacowano, że ilość odpadów komunalnych wytworzonych na Górnym Śląsku wynosiła w 2001 roku - 1,76 mln Mg, w tym 0,40 mln Mg odpadów palnych (Plan gospodarki odpadami dla województwa śląskiego 2003), w 2003 roku - 1,80 mln Mg, w tym 0,41 mln Mg odpadów palnych, zaś prognozowana na 2010 rok ilość odpadów to około 1,95 mln Mg, w tym palnych 0,50 mln Mg (w bilansie nie uwzględniono osadów i szlamów z biologicznego oczyszczania ścieków). Odpady palne, to w dużej mierze papier i tektura (25%) oraz tworzywa sztuczne (28%) nieopakowaniowe, jak i opakowaniowe (37%) oraz odpady tekstylne (10%). Aktualnie znaczna ich ilość kierowana jest na składowiska, a tylko część poddawana recyklingowi. (W krajach Unii Europejskiej kierowanie jakichkolwiek odpadów na składowiska jest ostatecznością, a nie zalecaną metodą ich unieszkodliwiania). Konieczne zatem jest poszukiwanie racjonalnego sposobu gospodarowania odpadami, szczególnie komunalnymi, które charakteryzują się potencjalnymi walorami energetycznymi. Jednym z takich sposobów jest ich termiczna destrukcja. Możliwe jest spalanie odpadów nieprzetworzonych, jak również spalanie paliw alternatywnych wytworzonych z wyselekcjonowanych strumieni odpadów komunalnych. Korzyści z zastosowania paliwa alternatywnego są następujące: - odzysk energii zawartej w paliwie alternatywnym, a więc oszczędność paliw naturalnych, - zmniejszenie emisji zanieczyszczeń, - możliwość wykorzystania istniejących kotłów energetycznych do odzysku energii z odpadów. Zasadnicze problemy w produkcji paliw może stwarzać standaryzacja jakości paliwa na bazie odpa-dów oraz ekonomika procesu produkcji. W artykule przedstawiono: - bilans odpadów komunalnych i przemysłowych mogących stanowić surowce do produkcji paliw alternatywnych na Śląsku, - analizę fizykochemiczną próbnej partii paliwa alternatywnego wyprodukowanego z wyselekcjono-wanych frakcji odpadów komunalnych, - wyniki badań spalania wyprodukowanego paliwa w przemysłowej jednostce kotłowej.
An overproduction of waste is problem of industrial civilisation in Poland it concerns particularly Upper Silesia, where problems related are imposed with developing municipal waste and industrial, including mine waste. It estimated, that amount of municipal waste fabricated in Upper Silesia in 2001 totalled - 1,76 million Mg, including 0,40 million Mg wastes inflammable (plan of waste economy for silesian province 2003), in 2003 - 1,80 million Mg, including 0,41 million Mg waste inflammable, forecasted amount of waste on 2010 it is 1,95 million Mg, including 0,50 million Mg of inflammable (in balance it did not take into consideration of sink and slimes from biological clean-up ). Inflammable wastes, it in great measure paper and cardboard (25%) and artificial materials (28%) not-packing as well as packing (37%) and textile wastes (10%). Currently some its amount is directed on stockyards considerable, but only part is recycled. (It is extreme process in countries of European union, but not prescribed method their neutralise). Therefore, it is indispensable search rational manner of wastes farming, particularly municipal, which characterised potential energy values. Thermal destruction is one of such manner. Incinerating of waste unprocessed is possible, as well as incinerating of alternative fuel fabricated from selected flows of municipal wastes. Benefits from employment of alternative fuel are following: - recycling energy exist in alternative fuel, so austerity of natural fuel, - decrease of contamination emission, - exist for recycling of energy from wastes energy boilers. Fundamental problems in fuel production can make standardisation of fuel quality on base of waste and economics of production process. In article it present: - balance waste municipal and industrial can present raw materials for production of alternative fuel on Silesia, - physical and chemical analysis trial party of alternative fuel produced from select fraction of municipal waste, - result of research incinerate produced fuel in industrial burning unit.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2004, 3; 27-38
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 145

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies