Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Bures, R." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
AC Magnetic Properties of Vitroperm Based Composite Materials
Autorzy:
Kollár, P.
Hegedüs, L.
Füzer, J.
Bureš, R.
Fáberová, M.
Powiązania:
https://bibliotekanauki.pl/articles/1533956.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Tt
81.05.Ni
85.70.-w
75.60.-d
75.50.Bb
Opis:
The aim of this work was to investigate the influence of resin content on AC magnetic properties of Vitroperm 800-based composite material to extend possibilities for application of this kind of material at higher frequency (up to 100 kHz). The samples of composite material were prepared in the form of the ring with outer diameter of 25 mm, inner diameter of 18 mm and height approximately 3 mm. Powder mixtures were prepared from Vitroperm 800 in partial nanocrystalline state and commercial termoset resins by mechanical mixing. The AC magnetic properties (losses) at maximum induction up to 0.5 T were measured by MATS-2010SA loop tracer in frequency range 1-100 kHz. The specific resistivity of the material was measured by the van der Pauw method. The magnetic properties of the composite rings were compared with the properties of the material prepared from Fe based powder supported by Höganäs. It was found out that the total losses of the Vitroperm-based soft magnetic composite are more than 10 times lower (at 10 kHz) than that for Fe-based one.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 787-789
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wide Frequency Range AC Magnetic Properties of Fe-Based Composite Materials
Autorzy:
Kollár, P.
Birčáková, Z.
Füzer, J.
Füzerová, J.
Bureš, R.
Fáberová, M.
Powiązania:
https://bibliotekanauki.pl/articles/1507025.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Ni
85.70.-w
75.60.-d
75.50.Bb
Opis:
The aim of this work was to analyze the influence of resin content on contribution of the hysteresis, eddy current and anomalous losses to the total losses in the frequency range from DC to 150 kHz. The samples of composite material were prepared in the form of the ring with outer diameter of 25 mm, inner diameter of 17 mm and height approximately 3 mm and in the form of cylinder with diameter of 25 mm and height approximately 3 mm by a compaction of mixture of iron powder ASC100.29 (90 vol.%) and commercial termoset resins. The DC hysteresis losses were obtained by the measurements of DC hysteresis loops and the total power losses in the frequency range 0.4 Hz-150 kHz from AC hysteresis loops, both at maximum induction 0.05, 0.1 and 0.2 T. The magnetic properties of the composite rings were compared with the properties of the material prepared from the powder supported by Höganäs AB Sweden. By analyzing the frequency dependence of total losses of the Fe-based SMC we found out that hysteresis losses contribute to the total losses as a majority component.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 759-761
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetic Properties of Sintered Fe₅₀Co₅₀ Powder Cores
Autorzy:
Olekšáková, D.
Kollár, P.
Füzer, J.
Onderko, F.
Dobák, S.
Viňáš, J.
Fáberová, M.
Bureš, R.
Powiązania:
https://bibliotekanauki.pl/articles/1032708.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Vv
85.70.-w
75.50.Bb
Opis:
We investigated coercivity, total losses and complex permeability of sintered Fe-Co powder cores to detect magnetization processes performing in ac magnetic field. The Fe-Co solid solution alloy powders with 50:50 wt% ratio were prepared by 1, 15, and 20 h alloyed mixture of pure chemical elements in planetary ball mill. The resulting powder was subsequently sintered into a disk form. The compaction was performed at a pressure of 800 MPa for 5 min at temperatures of 400°C, 500°C and 600°C in vacuum oxidation protective atmosphere, with pressure of 5×10¯³ Pa. The best magnetic properties exhibit sample prepared from 1 h alloyed powder, compacted at 600°C.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 807-809
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies