Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Numerical Simulation" wg kryterium: Temat


Tytuł:
Modelowanie matematyczne kinetyki suszenia okresowego pszenicy w układzie fluidalnym
Mathematical modelling of periodic drying kinetics of wheat in a lluidized bed system
Autorzy:
Ciesielczyk, W.
Kamińska-Pękala, A.
Powiązania:
https://bibliotekanauki.pl/articles/2073192.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
suszenie
fluidyzacja
modelowanie matematyczne
drying
fluidization
numerical simulation
Opis:
Przedstawiono ujęcie ilościowe kinetyki suszenia pszenicy. Zaproponowane równania ujmują zarówno ruch masy i ciepła między analizowanymi strefami, jak i między ciałem stałym, a gazem. W pracy zastosowano model dwustrefowy, wyróżniający strefę emulsji i strefę pęcherzy. Wyniki przewidywań teoretycznych pochodzących z obliczeń symulacyjnych zostały zweryfikowane przez porównanie z danymi doświadczalnymi otrzymanymi z użyciem suszarki fluidyzacyjnej o średnicy 0,150 m. Suszarka wyposażona była w oryginalne rozwiązanie konstrukcji dystrybutora gazu zapewniającego efektywną fluidyzację materiałów zaliczanych do grupy D wg klasyfikacji Geldarta. W części pracy dotyczącej pół-empirycznych metod analizy suszenia wykazano możliwość wykorzystania w obliczeniach procesowych koncepcji tzw. uogólnionej krzywej suszenia, co pozwala na znaczne ograniczenie zakresu badań eksperymentalnych niezbędnych do projektowania procesowego.
Quantification of drying kinetics of wheat is presented. The proposed equations describe the motion of heat and mass transfer between the analyzed zones, and between solid and gas phases. In the study a two-zone model comprising the distinctive emulsion and bubbles zones was used. The results of theoretical predictions obtained in simulations were validated by comparison with the experimental data collected in the fluidized bed dryer of a diameter equal to 0.150 meters. The dryer was equipped with a specially design gas distributor enabling efficient fluidization of materials belonging to the group D in Geldart classification. In the part of this work dealing with semi-empirical methods of drying analysis the possibility of applying a so-called concept of generalized drying curve in process calculations was demonstrated. This approach allows one to restrict significantly a scope of experimental research necessary in process design.
Źródło:
Inżynieria i Aparatura Chemiczna; 2016, 5; 175--177
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analizy numeryczne wybranych konstrukcji rozdrabniacza
Numerical and constructional analysis of grinders
Autorzy:
Macko, M.
Soboczyński, A.
Zybert, G.
Zgórski, Ł.
Jędrzejewski, Ł.
Wieczorek, P.
Wysocki, M.
Powiązania:
https://bibliotekanauki.pl/articles/2070317.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
rozdrabniacz bijakowy
rozdrabnianie
symulacja numeryczna
hammer mill
milling
numerical simulation
Opis:
Praca dotyczy zagadnień konstrukcyjnych rozdrabniaczy bijakowych oraz analiz numerycznych przeprowadzonych w środowisku CAD/CAE. Przedstawiono wybrane wyniki procesu dla wybranego zakresu prędkości obrotowych. Wyniki uzyskane w badaniach symulacyjnych porównano w dalszym etapie z wynikami badań laboratoryjnych.
The CAD/CAE emdronment was used for checking some constructional issues and numerical analysis of hammer mills. Results for a selected rangę of rotational yelocity arę presented. The simulation results were compared with those obtained in laboratory-scale tests.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 2; 92-93
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacje numeryczna procesu koalescencji w emulsjach spożywczych
Numerical simulations of coalescence proces in food emulsions
Autorzy:
Sęk, J.
Strzelecka, A.
Powiązania:
https://bibliotekanauki.pl/articles/2071653.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
emulsja
koalescencja
śmietankowanie
symulacja numeryczna
emulsions
coalescence
creaming
numerical simulation
Opis:
Badano numerycznie proces koalescencji i śmietankowania w emulsjach. Stworzono modele numeryczne układów dwufazowych zawierających regularnie rozmieszczone krople fazy rozproszonej. Przeprowadzono symulacje zachowania się takich rojów w warunkach różnych wartości sił masowych i przy różnej średnicy kropel. Wykazano zgodność wyników uzyskanych za pomocą modeli numerycznych z wartościami wynikającymi z zależności teoretycznych. Stwierdzono również różny przebieg procesów śmietankowania i koalescencji w zależności od warunków przepływu.
Coalescence and creaming of emulsions were investigated numerically. Numerical models of two-phase systems containing regularly distributed droplets of dispersed phase were created. Numerical simulation of flow and behavior of those systems of droplets were performed for different values of body forces and for different droplet diameter. It was proved that the numerical models were compatible with the theoretical equations. A different course of coalescence and creaming process was observed depending on flow conditions.
Źródło:
Inżynieria i Aparatura Chemiczna; 2011, 1; 41-42
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Geometric Simulation for Determination of Dynamic Undeformed Chip Thickness in Milling
Autorzy:
Bombiński, Sebastian
Jemielniak, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2201898.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
self-excited vibration
numerical simulation
computer graphics
5-axis milling
Opis:
Self-excited vibration is a significant constraint on productivity and production quality, which makes various forms of virtual machining widely used to find stable conditions before starting the actual machining operation. Numerical simulation of self-excited vibration, although much slower than analytical solutions, makes it possible to consider the nonlinearity of the process and its continuous variation. In 5-axis milling, predicting the instantaneous cross-sections of the uncut chip is very difficult, so geometric simulation is readily used to check the correctness of the NC program and the obtained shape of the workpiece. However, the known solutions take into consideration only programmed movements of the tool relative to the workpiece without considering vibrations, and those in which attempts have been made to consider vibrations have significant limitations. This paper uses a Geometric Simulator that determines the nominal positions of the tool relative to the workpiece, to which the displacements due to vibration, determined by the Dynamic Simulator, are added, making it possible to effectively determine the dynamic thickness of the cut layer and the trace on the workpiece material left by the vibrating tool. The use of geometric simulation, in which the material is represented by discrete voxels, introduces signal quantization, that is, the limited resolution of undeformed chip thickness and trace left on the machined surface. The paper presents the effect of voxel dimension on the accuracy of the simulation of self-excited vibrations.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 1; 173--181
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda symulacji numerycznej jako narzędzie do przewidywania erozji w instalacjach przemysłowych
Numerical simulation method as a tool for erosion prediction in industrial process lines
Autorzy:
Malcher, T.
Powiązania:
https://bibliotekanauki.pl/articles/2072585.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
erozja
symulacja numeryczna CFD
elektrofiltr
electrostatic precipitator
erosion
CFD numerical simulation
Opis:
Następstwem erozji jest niszczenie materiału prowadzące do różnego rodzaju uszkodzeń, a w konsekwencji do awarii urządzeń przemysłowych. W pracy zamodelowano numerycznie (CFD) to zjawisko na przykładzie kanałów spalin doprowadzających zapylony gaz do elektrofiltru. Przedstawiona weryfikacja geometrii badanego układu pod kątem destrukcyjnego działania erozji zdaniem autora stwarza możliwość określenia naddatków materiału lub daje wskazówki do zastosowania materiału o podwyższonej odporności na ścieranie tam, gdzie symulacja wykazała, że erozja jest znacząca.
The consequence of erosion is material destruction leading to different types of damages, and consequently to failure of industrial equipment. This phenomenon was modeled (CFD) on the example of flue gas channels supplying contaminated gas to the electrostatic precipitator. The verification of test system geometry for the erosion destructive action makes it possible to determine material allowances or gives indications for the use of material with high abrasion resistance, in cases where according to the simulation, the erosion is significant.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 3; 204--205
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Tool Geometry and Lubrication Conditions Effect on the Forming Load During Wire Drawing Process
Autorzy:
Shukur, Jalil J.
Khudhir, Waqass S.
Abbood, Mohanad Qusay
Powiązania:
https://bibliotekanauki.pl/articles/2201864.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
wire drawing
numerical simulation
drawing die
lubrication conditions
friction
lubricant type
Opis:
Most of wire drawing processes is performed at room temperature, causing rising up the heat due to the plastic deformation and the generated friction at the work piece-tool interface. In the poor lubrication conditions, there is a likelihood that both the die and the drawn wire will be damaged. This is because the drawing load is greatly influenced by tool geometry and lubrication conditions, The research work conducted in this paper focuses on drawing of 3 mm diameter Electrolytic tough pitch (ETP) cooper wire to perform 20% reduction in cross sectional area through a conical die. Various parameters have been tested to study the effect of them on the forming load during wire drawing including die angle (4°,6°,8°), bearing distance (1.2, 1.5, 1.8) mm, and lubricant types (Lithium-based greases, soap powder, oil HP). The first phase of this paper is conducted to estimate the coefficient of friction for each lubricant type, Utilizing the experimental values of drawing force in theoretical formals. Based on the estimated values obtained, the second phase was creating numerical model to extend the work to more parameters level as well as check the results validation. The results demonstrated that the drawing force increases with increasing of bearing distance and friction coefficient.
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 4; 279--286
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacyjne badanie wpływu sterowania tłumikiem MR na ograniczenie drgań
Investigation of MR damper influence on vibrations limitation using numerical simulation
Autorzy:
Makowski, M.
Grzesikiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/156769.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
symulacja
tłumienie drgań
zawieszenie koła pojazdu
Simulink
numerical simulation
damping vibrations
Opis:
Praca jest poświęcona opracowaniu algorytmu sterowania siłą tłumienia układu z tłumikiem magneto-reologicznym (MR). Przedstawiona została metoda ograniczenia drgań przez zastosowanie sterowania tłumikiem MR. Podczas badań symulacyjnych opracowano model zawieszenia pojazdu w programie Adams i układ sterowania siłą tłumienia w programie Simulink. Jako kryterium doboru sił tłumienia przyjęto wskaźnik charakteryzujący przyspieszenie pionowe.
This paper describes a control algorithm for a damping system equipped with magneto-rheological damper (MR). A method of vibration limitation by a controlled MR damper has been presented. The model of the vehicle suspension has been built using Adams software and the control algorithm the Simulink software. As a criterion of optimisation of the damping force the index characterising vertical accelerations has been used.
Źródło:
Pomiary Automatyka Kontrola; 2007, R. 53, nr 8, 8; 53-55
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wpływu modelu burzliwości na wyniki symulacji numerycznych przepływu wielofazowego w zbiorniku z mieszadłem CD 6
Evaluation of turbulence model impact on the numerical simulation results of two-phase gas – liquid flow in a stirred tank with the CD 6 impeller
Autorzy:
Musiał, M.
Karcz, J.
Powiązania:
https://bibliotekanauki.pl/articles/2073132.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
mieszanie
model burzliwości
symulacje numeryczne
CFD
mixing
turbulence model
numerical simulation
Opis:
Badania miały na celu określenie wpływu modelu burzliwości (k-ε, SST) na wyniki symulacji numerycznych (prędkość cieczy, udział gazu zatrzymanego w cieczy, rozmiar pęcherzy gazowych) przepływu dwufazowego wodny roztwór sacharozy – powietrze. Symulacje numeryczne przeprowadzono w zbiorniku o średnicy wewnętrznej D = 0,288 m zaopatrzonym w mieszadło CD 6. Na podstawie przeprowadzonych badań stwierdzono, że zastosowany w obliczeniach model burzliwości ma znaczący wpływ na średni rozmiar pęcherzy gazu.
The aim of this study was to determine the effect of turbulence model (k-ε, SST) on numerical simulation results (liquid velocity, gas hold-up and bubble size) in the two-phase saccharose solution – air flow system. Simulations were carried out for a vessel of inner diameter equal to 0.288 m, equipped with the CD 6 impeller. The results showed that the turbulence model used in computations has a significant impact on the size of gas bubbles.
Źródło:
Inżynieria i Aparatura Chemiczna; 2015, 6; 342--343
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczna symulacja jazdy w cieniu aerodynamicznym
Numerical simulation of the driving in aerodynamic shadow
Autorzy:
Maciejewski, M.
Maciejewski, T.
Powiązania:
https://bibliotekanauki.pl/articles/395433.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
aerodynamika samochodów
interakcja aerodynamiczna
numeryczna symulacja
car aerodynamics
aerodynamic interaction
numerical simulation
Opis:
Praca dotyczy numerycznej symulacji interakcji aerodynamicznej pomiędzy dwoma samochodami osobowymi, z których jeden porusza się w cieniu aerodynamicznym drugiego. Symulacje były podstawą do określenia zależności współczynnika oporu aerodynamicznego obu pojazdów od profilu nadwozia (hatchback, notchback i squareback) i odstępu pomiędzy pojazdami.
The paper concerns a numerical simulation of aerodynamic interaction between two passenger cars, from which one moves in aerodynamic shadow of other. Simulations were the basis for determination of dependence the aerodynamic drag coefficient of both vehicles on the vehicle shapes (hatchback, notchback and squareback) and the gap between vehicles.
Źródło:
Postępy Nauki i Techniki; 2012, 14; 157-168
2080-4075
Pojawia się w:
Postępy Nauki i Techniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The issue of icing in aviation. Study with the use of numerical simulation
Autorzy:
Grzegorczyk, K.
Wajszczak, E
Galas, D
Powiązania:
https://bibliotekanauki.pl/articles/102261.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
icing
numerical simulation
ice accretion
meteorological aspect of icing
physics of icing
Opis:
Although it has been over 100 years since Wright brothers’ first flight, icing has not been entirely investigated yet. The article is divided into 4 parts. The first one introduces the receiver of meteorological aspect of icing. Second part is devoted to physics aspect of ice accretion. The third and fourth parts describe icing with mathematical models and present a numerical simulation. We have completed our presentation with the results of numerical simulation.
Źródło:
Advances in Science and Technology. Research Journal; 2013, 7, 17; 42-46
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Simulation of the Phase Transformations in Steels: A Case Study on Newly-Developed Multi-Phase Steels for Drop Forgings
Autorzy:
Wojtacha, Anna
Opiela, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2024137.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
numerical simulation
CCT diagram
TTT diagram
multi-phase steels
symulacja numeryczna
wykres CCT
wykres TTT
stale wielofazowe
Opis:
The aim of the work was to determine the diagrams of phase evolution under equilibrium conditions and numerical simulation of austenite phase transformations under non-equilibrium conditions, as well as to determine CCT (Continuous Cooling Transformation) and TTT (Temperature Time Transformation) diagrams with the use of JMatPro software. The subject of the analysis were two newly elaborated multiphase steels assigned for production of forgings: steel A, containing of 0.165% C, 2% Mn, 1.11% Si and steel B, containing 0.175% C, 1,87% Mn, 1% Si, 0.22% Mo and Ti and V microadditions at a concentration of 0.031% and 0.022%, respectively. The performed simulation revealed that the investigated steels have similar critical temperatures under equilibrium conditions: Ac1 ~ 680°C, Ac3 ~ 830°C. The chemical composition of steel B and the interaction of Mo, Ti and V in particular, determine that diffusion transformations, i.e. ferritic and pearlitic, in the elaborated CCT and TTT diagrams are significantly shifted to longer times in relation to the position of these transformations in the diagrams for steel A. A distinct delay also concerns the bainitic transformation. Moreover, it was found that the MS temperature of steel B is slightly lower. The determined CCT and TTT diagrams are essentially helpful in the development of heat and thermo-mechanical treatment conditions for new steel grades.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 1; 126-133
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of One and Two Horizontal Plates to Reduce the Drag Force on the Rigid Cylinder Located Inside the Channel: Approach of the Immersed Interface Method
Autorzy:
Alizadeh, As’ad
Jafarmadar, Samad
Zekri, Hussein Jebrail
Powiązania:
https://bibliotekanauki.pl/articles/102565.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
rigid cylinder
immersed interface method
numerical simulation
drag force
sztywny cylinder
metoda zanurzonego interfejsu
symulacja numeryczna
siła tarcia
Opis:
Immersed interface method is a non-matching boundary approach that has been taken into consideration in recent years. In this method, there is no need to coincide between the fluid and the solid grids. Eulerian grid is used for fluid domain and Lagrangian grid is used for solid domain. Using the Dirac Delta function, the connection between these two grids is established. Separation of the flow from the cylinder surface causes a high pressure drop in some parts of the cylinder, resulting in a dramatic increase in drag force. Drag force reduction is very important in some engineering issues, and several methods have been proposed to achieve this goal. In this study, the flow around a rigid cylinder is simulated. The goal is to reduce the drag force on the cylinder through one and two horizontal plates. The results are in good agreement with prior numerical results.
Źródło:
Advances in Science and Technology. Research Journal; 2019, 13, 4; 188-193
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulation of forming titanium thin-wall panels with stiffeners
Autorzy:
Adamus, Janina
Winowiecka, Julita
Dyner, Marcin
Lacki, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/102516.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sheet
commercially pure titanium
sheet-metal forming
stiffeners
numerical simulation
arkusz
komercyjnie czysty tytan
formowanie blachy
usztywniacze
symulacja numeryczna
Opis:
Due to the increase in the application of titanium components made of thin titanium sheets, in the work titanium panels made of 4 mm thick sheets are analysed. To increase the rigidity of the panels, some cross-shaped stiffeners were made. Such panels enable a reduction in weight while maintaining the existing strength of the drawn parts. Three kinds of commercially pure titanium are considered: Grade 1, 2 and 3. Numerical calculations were performed with PamStamp 2G based on the finite element method. The basic mechanical and technological properties of the analysed sheets, which are necessary for numerical modelling, were determined by static tensile testing. The friction coefficient was assumed based on the literature. On the basis of the performed numerical analyses, it was stated that the proper forming of panels with stiffeners depends not only on the drawability of the sheets but also on the technological parameters such as blank holder force and frictional conditions.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 1; 54-62
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Buckling stability assessment of plates under uniaxial compression
Autorzy:
Riahi, Farhad
Zirakian, Tadeh
Ghaderi, Vahed Mam
Arya, Souran
Powiązania:
https://bibliotekanauki.pl/articles/102344.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
plates
buckling
support conditions
aspect ratio
design ratio
slenderness ratio
numerical simulation
płyty
wyboczenie
współczynnik proporcji
współczynnik smukłości
symulacja numeryczna
Opis:
Buckling of thin-walled and load-bearing elements of a structure can have devastating consequences. Hence, buckling checks are an integral part of strength analysis of structures. The buckling problem of thin rectangular plates subjected to in-plane compressive and/or shear loading is of great importance in building, bridge, aerospace, marine, and shipbuilding industries. When buckling occurs, thin plates undergo large out-of-plane deflections, which in turn results in the development of large bending stresses and eventually complete failure of the structure. This paper deals with the buckling stability assessment of uniaxially-compressed plates with different support conditions within the framework of classical plate theory. The main objective of this research is to explore some uncovered aspects of buckling stability of plates by considering the effects of support conditions, aspect ratio, and slenderness ratio, which will consequently result in efficient design of such thin-walled structures. To this end, in addition to validation of the numerical simulation, some case studies have been performed in order to gain a better understanding of different aspects of buckling stability of such thin-walled structures.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 2; 97-105
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of Fe-Zn coated steel sheets tribological characteristics
Studium charakterystyk tribologicznych blach stalowych z powłokami Fe-Zn
Autorzy:
Evin, E.
Tomáš, M.
Semjon, V.
Powiązania:
https://bibliotekanauki.pl/articles/189425.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
Fe-Zn coatings
steel sheets
coating morphology
friction coefficient
numerical simulation
powłoki Fe-Zn
blachy stalowe
morfologia powłoki
współczynnik tarcia
symulacja numeryczna
Opis:
This paper presents the results of a study of the tribological characteristics of Fe-Zn coated steel sheets. Experimental research was done using coatings with different alloying – under alloyed, optimal and slightly pre-alloyed. The alloying level was evaluated by phase composition and the percentage of Fe in the coating. Tribological properties such as surface microgeometry, abrasion, and friction coefficient were analysed. The experimental results of strip drawn test were used for the verification of numerical simulation. Based on numerical simulation results, characteristics has been determined.
Artykuł przedstawia wyniki badań charakterystyk tribologicznych blach stalowych z powłokami Fe-Zn. Badania eksperymentalne zostały wykonane dla powłok o różnym składzie stopu – z niską zawartością żelaza, o składzie optymalnym i z powłoką wstępną. Tworzenie stopu było oceniane przez kompozycję fazową i zawartość procentową Fe w powłoce. Własności tribologiczne, jak mikogeometria powierzchni, zużycie ścierne, współczynnik tarcia były analizowane z punktu widzenia formowalności. Wyniki testów paskowych posłużyły do weryfikacji symulacji numerycznej tego testu. Na bazie wyników symulacji numerycznej określono naciski stykowe na promieniu matrycy ciągowej.
Źródło:
Tribologia; 2013, 1; 35-46
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies