Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "high-frequency" wg kryterium: Temat


Tytuł:
On the Noise Hazard Assessment within the Intermediate Range of the High Audible and the Low Ultrasonic Frequencies
Autorzy:
Śliwiński, A.
Powiązania:
https://bibliotekanauki.pl/articles/177315.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasonic noise assessment
high frequency audiometry
Opis:
In parallel to the ultrasonic noise assessment procedures and research activity in the field there have appeared several papers in the domain of so called high-frequency audiometry which covers the range of frequencies 8–20 kHz. They are important for recognizing the harmfulness and hazard of the audible high frequency sound components in the same range as the one of the low frequency ultrasonic noise. On the other hand there exists a certain inconsequent situation in the general approach to the problem of ultrasonic noise hazard assessment in work places environment which concerns the convention to include the frequency range of 10–20 kHz to the domain of ultrasonics. The range consists of one third octave bands of central frequencies: 10, 12.5, 16, 20 kHz and conventionally is called low frequency ultrasonic noise though at least the components of the two lowest bands are naturally audible by a majority of population (mainly young people).The paper presents a discussion related to some achievements of the two domains and some conclusions which could be useful for a more consequent description of the subject and could be taken into account in the future regulations for the ultrasonic noise assessment in work places environment.
Źródło:
Archives of Acoustics; 2016, 41, 2; 331-338
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative investigation of SiC and Si power electronic devices operating at high switching frequency
Autorzy:
Zymmer, K.
Mazurek, P.
Powiązania:
https://bibliotekanauki.pl/articles/200057.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
semiconductor devices
silicon carbide
high frequency converters
Opis:
The paper presents results of measurements of the reverse recovery current and dynamic forward voltage of the silicon carbide (SiC) Schottky diodes operating at a 500 A/ěs current slope. These data were compared with the corresponding parameters determined for ultrafast silicon (Si) diodes. Results of power losses measurement in SiC Schottky diodes operating at switching frequency range of (10–200) kHz are presented and compared with corresponding data of ultrafast Si diodes. Also, results of power losses measurements in transistors of dc voltage switch are shown. Investigations were conducted with a SiC and the ultrafast Si freewheeling diode at the transistor switching frequency of 100 kHz. The results of measuring power losses dissipated in the dc converter with a SiC Schottky diode and the ultrafast silicon diode are also presented.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2011, 59, 4; 555-559
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A High-Efficient Low-Voltage Rectifier for CMOS Technology
Autorzy:
Jendernalik, W.
Jakusz, J.
Blakiewicz, G.
Kłosowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/220356.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CMOS rectifier
high frequency rectifier
wireless power transmission
Opis:
A new configuration of rectifier suiting CMOS technology is presented. The rectifier consists of only two n-channel MOS transistors, two capacitors and two resistors; for this reason it is very favourable in manufacturing in CMOS technology. With these features the rectifier is easy to design and cheap in production. Despite its simplicity, the rectifier has relatively good characteristics, the voltage and power efficiency, and bandwidth greater than 89%, 87%, and 1 GHz, respectively. The performed simulations and measurements of a prototype circuit fully confirmed its correct operation and advantages.
Źródło:
Metrology and Measurement Systems; 2016, 23, 2; 261-268
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of acoustical and optical zooplankton measurements using an acoustic scattering model: A case study from the Arctic frontal zone
Autorzy:
Szczucka, Joanna
Błachowiak-Samołyk, Katarzyna
Trudnowska, Emilia
Hoppe, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/2046858.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Arctic
Svalbard
zooplankton
high−frequency echosounding
sound scattering model
Źródło:
Polish Polar Research; 2016, 37, 1; 67-88
0138-0338
2081-8262
Pojawia się w:
Polish Polar Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Connectivity Solutions in Automated Trading
Autorzy:
Popławski, P.
Powiązania:
https://bibliotekanauki.pl/articles/226896.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
telecommunications
digital systems
systems architecture
automated trading
high frequency trading
Opis:
The study analyzes the architecture and deployment of direct market access (DMA) solutions for automated trading of securities. It provides an overview of automated trading systems including: trading floor architecture, trading environment connectivity, and DMA solutions. Among a range of factors influencing operational capacities, round-trip latency has been recognized as the key quality differentiator of an automated trading floor. The study identifies potential opportunity costs due to latency levels as a major driver of technological progress in trading in highly liquid market conditions.
Źródło:
International Journal of Electronics and Telecommunications; 2015, 61, 4; 403-408
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thick Film Transducers for High Frequency Coded Ultrasonography
Autorzy:
Nowicki, A.
Lewandowski, M.
Wójcik, J.
Tymkiewicz, R.
Lou-Moller, R.
Wolny, W.
Zawada, T.
Powiązania:
https://bibliotekanauki.pl/articles/176939.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
transducers
thick film
high frequency ultrasound
pulse compression
Golay codes
Opis:
Recently a new technology of piezoelectric transducers based on PZT thick film has been developed as a response to a call for devices working at higher frequencies suitable for production in large numbers at low cost. Eight PZT thick film based focused transducers with resonant frequency close to 40 MHz were fabricated and experimentally investigated. The PZT thick films were deposited on acoustically engineered ceramic substrates by pad printing. Considering high frequency and nonlinear propagation it has been decided to evaluate the axial pressure field emitted (and reflected by thick metal plate) by each of concave transducer differing in radius of curvature – 11 mm, 12 mm, 15 mm, 16 mm. All transducers were activated using AVTEC AVG-3A-PS transmitter and Ritec diplexer connected directly to Agilent 54641D oscilloscope. As anticipated, in all cases the focal distance was up to 10% closer to the transducer face than the one related to the curvature radius. Axial pressure distributions were also compared to the calculated ones (with the experimentally determined boundary conditions) using the angular spectrum method including nonlinear propagation in water. The computed results are in a very good agreement with the experimental ones. The trans- ducers were excited with Golay coded sequences at 35–40 MHz. Introducing the coded excitation allowed replacing the short-burst transmission at 20 MHz with the same peak amplitude pressure, but with almost double center frequency, resulting in considerably better axial resolution. The thick films exhibited at least 30% bandwidth broadening comparing to the standard PZ 27 transducer, resulting in an increase in matching filtering output by a factor of 1.4–1.5 and finally resulting in a SNR gain of the same order.
Źródło:
Archives of Acoustics; 2011, 36, 4; 945-954
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement and Analysis of Partial Discharge using an Ultra-High Frequency Sensor for Gas Insulated Structures
Autorzy:
Wang, G.
Kil, G.-S.
Powiązania:
https://bibliotekanauki.pl/articles/221519.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas insulated structures
partial discharge
ultra-high frequency sensor
conversion
Opis:
Although the gas insulated structures have a high degree of reliability, the unavoidable defects are primary reason of their failures. Partial discharge (PD) has been regarded as an effective indication for condition monitoring and diagnosis of gas insulated switchgears (GISs) to ensure their reliable and stable operation. Among various PD detection methods, the ultra-high frequency (UHF) technique has the advantages of on-line motoring and defect classification. In this paper, there are presented 7 types of artificial electrode systems fabricated for simulation of real insulation defects in gas insulated structures. A real-time measurement system was developed to acquire defect patterns in a form of phase-resolve partial discharge (PRPD) intensity graph, using a UHF sensor. Further, the discharge distribution and statistical characteristics were extracted for defect identification using a neural network algorithm. In addition, a conversion experiment was proposed by detecting the PD pulse simultaneously using a non-induction resistor and a UHF sensor. A relationship between the magnitude of UHF signal and the amplitude of apparent charge was established, which was used for evaluation of PD using the UHF sensor.
Źródło:
Metrology and Measurement Systems; 2017, 24, 3; 515-524
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High frequency metrology for intracardiac ablation: in-vivo results
Autorzy:
Rouane, A.
Bru, P.
Powiązania:
https://bibliotekanauki.pl/articles/221888.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
impedance matching
voltage measurement cell
current measurement cell
high frequency energy
Opis:
Cardiac Radiofrequency (RF) ablation is a commonly used clinical procedure for treating many cardiac arrhythmias. However, the efficacy of RF ablation may be limited by two factors: small ventricular lesions and impedance rise, leading to coagulum formation and desiccation of tissue. In this paper, a high frequency (HF) energy ablation system operating at 27.12 MHz based on an automated load matching system was developed. A HF energy matched probe associated to the automated impedance matching device ensures optimal transfer of the energy to the load. The aim of this study was to evaluate this energy for catheter ablation of the atrioventricular junction. In vivo studies were performed using 10 sheep to characterize the lesions created with the impedance matching system. No cardiac perforation was noted. No thrombus was observed at the catheter tip. Acute lesions ranged from 3 to 45 mm in diameter (mean šSD = 10.3š10) and from 1 to 15 mm in depth (6.7š3.9), exhibiting a close relationship between HF delivered power level and lesion size. Catheter ablation using HF current is feasible and appears effective in producing a stable AV block when applied at the AV junction and large myocardial lesions at ventricular sites.
Źródło:
Metrology and Measurement Systems; 2012, 19, 3; 603-610
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving sensitivity of residual current transformers to high frequency earth fault currents
Autorzy:
Czapp, S.
Dobrzyński, K.
Klucznik, J.
Lubosny, Z.
Kowalak, R.
Powiązania:
https://bibliotekanauki.pl/articles/141169.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
current transformers
earth fault currents
electric devices
electromagnetic couplings
high frequency
Opis:
For protection against electric shock in low voltage systems residual current devices are commonly used. However, their proper operation can be interfered when high frequency earth fault current occurs. Serious hazard of electrocution exists then. In order to detect such a current, it is necessary to modify parameters of residual current devices, especially the operating point of their current transformer. The authors proposed the modification in the structure of residual current devices. This modification improves sensitivity of residual current devices when high frequency earth fault current occurs. The test of the modified residual current device proved that the authors’ proposition is appropriate.
Źródło:
Archives of Electrical Engineering; 2017, 66, 3; 485-494
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling Foreign Exchange Realized Volatility Using High Frequency Data: Long Memory versus Structural Breaks
Autorzy:
Maatoug, Abderrazak Ben
Lamouchi, Rim
Davidson, Russell
Fatnassi, Ibrahim
Powiązania:
https://bibliotekanauki.pl/articles/2076275.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foreign exchange markets
realized volatility
high-frequency data,long memory
structural change
Opis:
In this study, we model realized volatility constructed from intra-day highfrequency data. We explore the possibility of confusing long memory and structural breaks in the realized volatility of the following spot exchange rates: EUR/USD, EUR/JPY, EUR/CHF, EUR/GBP, and EUR/AUD. The results show evidence for the presence of long memory in the exchange rates’ realized volatility. From the Bai–Perron test, we found structural breakpoints that match significant events in financial markets. Furthermore, the findings provide strong evidence in favour of the presence of long memory.
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2018, 1; 1-25
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of High Frequency Heat Treatment on the Microstructure and Macroscopic Properties of WC-50Ni+Stellite 1 Coating Layer Fabricated by HVOF Spray Process
Autorzy:
Ham, Gi-Su
Wi, Dong-Yeol
Park, Sun-Hong
Lee, Kee-Ahn
Powiązania:
https://bibliotekanauki.pl/articles/354654.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
HVOF spray
WC-50Ni
Stellite 1
composite coating
high frequency heat treatment
Opis:
The microstructure and macroscopic properties of WC-50Ni+stellite 1(Co-Cr-W, ST1) coating layer fabricated by HVOF spray have been investigated. WC-50Ni powder and ST1 powders were mixed in the ratio of 1:0 and 5:5 wt.%, respectively. Argon heat treatment (Ar) and high-frequency heat treatment (H.F.) were conducted on the coating materials. WC was decomposed in the Ar heat treatment specimen, but decomposition of WC was not observed in the H.F. heat treatment specimen. Hardness was measured for as-sprayed WC-50Ni (821.5Hv) and as-sprayed WC-50Ni+ST1 (668.1 Hv). Hardness of Ar heat treatment specimen was reduced by about 14~18% than that of the as-sprayed coating layers. However, when the H.F. heat treatment was performed, the hardness inversely increased by about 6~10% than the as-sprayed coating layer. Based on these results, the method to improve the mechanical property of HVOF sprayed WC-50Ni+ST1 coating layer has also been also discussed.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 3; 1087-1092
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel circuit topology of modified switched boost hybrid resonant inverter fitted induction heating equipment
Autorzy:
Bhattacharya, A.
Sit, K.
Sadhu, P. K.
Pal, N.
Powiązania:
https://bibliotekanauki.pl/articles/140770.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
modified switched boost
high frequency
hybrid resonant inverter
induction heating
controllability
VSI and PSIM
Opis:
A novel circuit topology of modified switched boost high frequency hybrid resonant inverter fitted induction heating equipment is presented in this paper for efficient induction heating. Recently, induction heating technique is becoming very popular for both domestic and industrial purposes because of its high energy efficiency and controllability. Generally in induction heating, a high frequency alternating magnetic field is required to induce the eddy currents in the work piece. High frequency resonant inverters are incorporated in induction heating equipment which produce a high frequency alternating magnetic field surrounding the coil. Previously this high frequency alternating magnetic field was produced by voltage source inverters. But VSIs have several demerits. So, in this paper, a new scheme of modified switched boost high frequency hybrid resonant inverter fitted induction heating equipment has been depicted which enhances the energy efficiency and controllability and the same is validated by PSIM.
Źródło:
Archives of Electrical Engineering; 2016, 65, 4; 815-826
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics and Applications of Silicon Carbide Power Devices in Power Electronics
Autorzy:
Kondrath, N.
Kazimierczuk, M. K.
Powiązania:
https://bibliotekanauki.pl/articles/226774.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicon carbide (SiC)
SiC properties
high voltage
high-temperature
high-frequency applications
high-temperature electronics
wide energy band-gap semiconductors
Opis:
Silicon carbide materials, with its high mechanical strength, high thermal conductivity, ability to operate at high temperatures, and extreme chemical inertness to most of the electrolytes, are very attractive for high-power applications. In this paper, properties, advantages, and limitations of SiC and conventional Si materials are compared. Various applications, where SiC power devices are attractive, are discussed.
Źródło:
International Journal of Electronics and Telecommunications; 2010, 56, 3; 231-236
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bayesian optimization for solving high-frequency passive component design problems
Autorzy:
Baranowski, Michal
Fotyga, Grzegorz
Lamecki, Adam
Mrozowski, Michal
Powiązania:
https://bibliotekanauki.pl/articles/2173688.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-frequency design
machine learning
Bayesian optimization
optymalizacja bayesowska
konstrukcja o wysokiej częstotliwości
nauczanie maszynowe
Opis:
In this paper, the performance of the Bayesian Optimization (BO) technique applied to various problems of microwave engineering is studied. Bayesian optimization is a novel, non-deterministic, global optimization scheme that uses machine learning to solve complex optimization problems. However, each new optimization scheme needs to be evaluated to find its best application niche, as there is no universal technique that suits all problems. Here, BO was applied to different types of microwave and antenna engineering problems, including matching circuit design, multiband antenna and antenna array design, or microwave filter design. Since each of the presented problems has a different nature and characteristics such as different scales (i.e. number of design variables), we try to address the question about the generality of BO and identify the problem areas for which the technique is or is not recommended.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2022, 70, 4; art. no. e141595
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of High-Frequency Electric Resistance Welding (HF-ERW) Parameters on Metallurgical Transformations and Tensile Properties of API X52 Microalloy Steel Welding Joint
Autorzy:
Sabzi, M.
Kianpour-Barjoie, A.
Ghobeiti-Hasab, M.
Dezfuli, S. M.
Powiązania:
https://bibliotekanauki.pl/articles/353144.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
High Frequency Electric Resistance Welding
HF-ERW
frequency
compression force
Vee angle
mechanical behavior
API X52 microalloyed steel
Opis:
This study investigates the effects of frequency, compression force and Vee angle parameters of High-Frequency Electric Resistance Welding (HF-ERW) process on mechanical properties of API X52 microalloy steel welding joint. Therefore, API X52 microalloy steel sheets having thickness of 8 mm was provided to manufacture pipes with the diameter of 16”. with direct weld seams using the HF-ERW method. During the manufacturing process, frequency values of 150, 200 and 250 kHz, compression forces of 2, 4 and 6 mark and Vee angles of 3°, 5°, and 7° were adopted. After changing the welding parameters, from the welded pipes, tensile and Charpy impact test samples prepared to macroscopically evaluate the weld metal flow and examine the effects of these parameters on mechanical properties of the welded joints. According to the results, it was concluded that frequency of 150 kHz, the compression force of 4 mark and Vee angle of 5° yields best mechanical properties in the HF-ERW joint of API X52 microalloy steel.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 4; 1693-1699
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies