- Tytuł:
- Amount and Distribution of Micro-Defects in Solidified 2219 Al Alloy Ingots: a Metallographic Investigation
- Autorzy:
-
Liu, Yu
Huang, Yuanchun
Xiao, Zhengbing - Powiązania:
- https://bibliotekanauki.pl/articles/354423.pdf
- Data publikacji:
- 2019
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
metallographic
micro-defect
2219 Al alloy ingot
amount
distribution - Opis:
- Micro-defects detection in solidified castings of aluminum alloy has always been a hot topic, and the method employed is mainly depends upon the size and shape of the specimens. In present paper, the amount and distribution characters of micro-defects in a series of 2219 aluminum alloy ingot, with diameters of φ1380 mm, φ1250 mm, φ1000 mm, φ850 mm and φ630 mm, prepared by direct chill casting were investigated by means of metallographic, respectively. Samples were cut along the radius directionfrom slices in the steady casting stage. The result reveals that typical micro-defects are consist of inclusions, porosity and shrinkage under optical microscope, and the total amount of micro-defect per unit area in an ingot slightly decreased with the increase of its diameter. Meanwhile, defects were classified into 2 types according to its size, the results suggesting that defects greater than 40 μm account for the largest proportion among the counted two kinds of defects. Moreover, the distribution of defects greater than 40 μm along the radial direction was detected, its amount increases as its distance from the side, indicating that the micro-defects greater than 40 μm distributed the most in the center zone of ingots and the larger the ingot diameter, the more obvious the tendency was.
- Źródło:
-
Archives of Metallurgy and Materials; 2019, 64, 4; 1569-1575
1733-3490 - Pojawia się w:
- Archives of Metallurgy and Materials
- Dostawca treści:
- Biblioteka Nauki
Artykuł