Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lee, H. J." wg kryterium: Autor


Tytuł:
Fabrication of Porous Silica Fibers by Electrospinning for Sound Absorbing Materials
Autorzy:
Cho, Y.-S.
Lee, H. J.
Powiązania:
https://bibliotekanauki.pl/articles/353561.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrospinning
porous silica fiber
thermal insulator
sound absorption
Opis:
Macroporous silica fibers having spherical cavities were fabricated by electrospinning using the spinning solution prepared from the mixed dispersion of tetraethylorthosilicate (TEOS) and polystyrene nanospheres as precursor and sacrificial templates, respectively, by injection through metallic nozzle. By applying electric field, the electro-spun fibers obtained by evaporation-driven self-assembly were collected on flat substrate or rotating drum, followed by the removal of the templates by calcination. The sound absorption coefficient of the porous fibers was measured by impedance tube, and the measured value was larger than 0.9 at high frequency region of incident waves. The surface of the resulting fibers was modified using fluorine-containing silane coupling agent to produce superhydrophobic fibrous materials to prevent the infiltration of humidity.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1497-1502
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Temperature Deformation Flow Of A ZK60A Magnesium Alloy After Extrusion
Płynięcie stopu magnezu ZK60A podczas wysokotemperaturowego odkształcenia w trakcie wytłaczania
Autorzy:
Kawasaki, M.
Lee, H. J.
Oh, M. C.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/354374.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
activation energy
extrusion
flow mechanics
magnesium alloy
tensile property
energia aktywacji
wytłaczanie
mechanika przepływu
stop magnezu
rozciąganie
Opis:
Flow behavior of a ZK60A magnesium alloy after continuous casting and subsequent extrusion was examined in tension at a range of strain rates of 3.0×10-6 − 1.0×10-2 s-1 at temperatures of 473-623K. The results demonstrated that the alloy exhibited a maximum elongation of ~250% at 523K when tested at an initial strain rate of 1.0×10-5 s-1 and strain rate sensitivity, m, of ~0.3-0.4 and the activation energy of ~94 kJ/mol were calculated under the testing conditions. The detailed investigation suggested that the high temperature flow of the ZK60A alloy having submicrometer grains demonstrates quasi-superplastic flow behavior controlled by a dislocation viscous glide process.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1327-1330
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Graphite Nanosheet Exfoliation From Graphite Flakes Through Functionalization Using Phthalic Acid
Złuszczanie nanoarkuszy grafitu z płatków grafitu przy użyciu kwasu ftalowego
Autorzy:
Kim, J. H.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/351457.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
exfoliation
graphite nanosheet
functionalization
grafting molecule
Friedel-Crafts acylation
złuszczanie
nanoarkusz grafitu
funkcjonalizacja
kwas ftalowy
acylowanie Friedela-Craftsa
Opis:
In order to fabricate graphite nanosheets from graphite flakes, edge-functionalized graphite nanosheets were prepared by a functionalization method using phthalic acid as the molecule to be grafted. A polyphosphoric acid/P2O5 solution containing graphite and phthalic acid were heated at different temperatures for 72 h in a nitrogen atmosphere. It was confirmed by transmission electron microscopy and atomic force microscopy that the resultant phthalic acid-functionalized graphite nanosheets had a large surface area of 20.69 μm2 in average and an average thickness of 1.39 nm. It was also found by X-ray diffractometry and Fourier transform infrared spectroscopy (FT-IR) analysis that the functionalization caused the formation of C=O bonds at the edges of the graphite nanosheets. The yield from this functionalization method was found to be dependent on the reaction temperature, only when it is between 70 and 130°C, because of the dehydration of phthalic acid at higher temperatures. This was confirmed by FT-IR analysis and the observation of low thermal energies at low temperatures.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1251-1255
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transient Liquid Phase Behavior of Sn-Coated Cu Particles and Chip Bonding using Paste Containing the Particles
Autorzy:
Hwang, J. H.
Lee, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/353042.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Sn-coated Cu
immersion plating
chip bonding
intermetallic compounds (IMC)
transient liquid phase (TLP)
sintering
Opis:
Sn-coated Cu particles were prepared as a filler material for transient liquid phase (TLP) bonding. The thickness of Sn coating was controlled by controlling the number of plating cycles. The Sn-coated Cu particles best suited for TLP bonding were fabricated by Sn plating thrice, and the particles showed a pronounced endothermic peak at 232°C. The heating of the particles for just 10 s at 250°C destroyed the initial core-shell structure and encouraged the formation of Cu-Sn intermetallic compounds. Further, die bonding was also successfully performed at 250°C under a slight bonding pressure of around 0.1 MPa using a paste containing the particles. The bonding time of 30 s facilitated the bonding of Sn-coated Cu particles to the Au surface and also increased the probability of network formation between particles.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1143-1148
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Fatigue Fracture Study on TDCB Aluminum Foam Specimen of Type Mode III Bonded with Adhesive
Autorzy:
Lee, J. H.
Cho, J. U.
Powiązania:
https://bibliotekanauki.pl/articles/356731.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum foam
fatigue fracture
fatigue analysis
load
Mode III type
specimen thickness
Opis:
This paper studies the characteristics of junction structure of closed-cell type aluminum foam, which is generally used as a shock absorber. TDCB specimens were designed for mode III type with thickness as a variable and performed a fatigue experiment on them by thickness. As the result, the load value of all specimens peaks under 0 to 25 cycles and decreases as the cycles increase. As the specimen thickens by 10 mm, the maximum load value is 1.2 times. When the thickness increases by 20 mm, the maximum value increases by 1.5 times. This study result can be utilized by investigating the mechanical characteristics of TDCB specimens for mode III type under fatigue loading conditions systematically and efficiently.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1359-1362
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compressive Deformation Behavior of Thick Micro-Alloyed HSLA Steel Plates at Elevated Temperatures
Autorzy:
Lee, J.-H.
Kim, D.-O.
Lee, K.
Powiązania:
https://bibliotekanauki.pl/articles/351774.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
alloys
rolling
strain rate
compression test
HSLA steel
Opis:
The hot deformation behavior of a heavy micro-alloyed high-strength low-alloy (HSLA) steel plate was studied by performing compression tests at elevated temperatures. The hot compression tests were carried out at temperatures from 923 K to 1,223 K with strain rates of 0.002 s-1 and 1.0 s-1. A long plateau region appeared for the 0.002 s-1 strain rate, and this was found to be an effect of the balancing between softening and hardening during deformation. For the 1.0 s-1 strain rate, the flow stress gradually increased after the yield point. The temperature and the strain rate-dependent parameters, such as the strain hardening coefficient (n), strength constant (K), and activation energy (Q), obtained from the flow stress curves were applied to the power law of plastic deformation. The constitutive model for flow stress can be expressed as σ = (39.8 ln (Z) – 716.6) · ε(−0.00955ln(Z) + 0.4930) for the 1.0 s-1 strain rate and σ = (19.9ln (Z) – 592.3) · ε(−0.00212ln(Z) + 0.1540) for the 0.002 s-1 strain rate.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1191-1196
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Submicroscale Ag-Coated Cu Particles by Multi-Step Addition of Ag Plating Solution and Antioxidation Properties for Different Ag Shell Thicknesses
Autorzy:
Choi, E. B.
Lee, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/351202.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ag-coated Cu particle
submicrometer
Glycol-based Ag plating solution
mult-step addition
antioxidation
Opis:
For application as a low-cost conductive filler material, submicroscale Cu@Ag particles were fabricated at room temperature without any reductants by a multi-step addition method using an ethylene glycol-based Ag plating solution. Scanning electron microscopy images of the Ag-coated Cu particles demonstrated the formation of discrete Ag particles less than 100 nm in size as well as a thin Ag coating on Cu particles, during the early addition steps. However, as the thickness of the Ag coating increased, the small Ag particles agglomerated into Ag coatings with an increase in the number of Ag plating steps. Owing to the absence of additives such as surfactants, a comparison between the microstructural images and calculations indicated increased agglomeration between fabricated Ag-coated Cu particles with an increase in the number of Ag plating steps. However, thermogravimetric-differential scanning calorimetry of the agglomerated Ag-coated Cu particles after the fifth addition of the Ag plating solution demonstrated their antioxidation behavior even after 70 min in air at 150°C.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1137-1142
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects Of Process Parameters On Cu Powder Synthesis Yield And Particle Size In A Wet-Chemical Process
Wpływ parametrów procesu na wydajność syntezy proszku Cu i wielkości cząstek w procesie mokrym chemicznym
Autorzy:
Shin, Y. M.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/354168.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wet-chemical process
micron-size Cu powder
Synthesis yield
particle size
gibbs free energy difference
proszek Cu
proces chemiczny mokry
wydajność syntezy
rozmiar cząsteczki
różnica energii swobodnej Gibbsa
Opis:
This study presents a simple wet-chemical process to prepare several micron-size Cu powders. Moreover, changes in powder synthesis yield and particle size are examined with different solvents, synthesis temperatures, and amounts of reducing agent during the synthesis. As a reducing agent and capping agent, L-ascorbic acid and polyvinyl pyrrolidone were used, respectively. The yields in distilled water or an ethylene glycol (EG)/distilled water mixture were higher than that in EG alone, and the yield increased with increasing temperature owing to a lower Δ Gred value. Increasing the L-ascorbic acid concentration also increased the yield. The Cu powder synthesized in 3 h at 90°C in distilled water with 272.8 mM of L-ascorbic acid showed the lowest average particle size of 2.52 μm, indicating mechanisms of short burst nucleation and reduced growth via the increased reduction rate of Cu ions. It is estimated that the nucleation step was nearly completed within 10 min in this system. The Cu powders synthesized in an ethylene glycol/distilled water mixture presented an average particle size of 3.76 μm and the highest yield of 87.9%.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1247-1250
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Atomistic Analysis Of Radiation-Induced Segregation In Ion-Irradiated Stainless Steel 316
Analiza w skali atomowej indukowanej promieniowaniem segregacji w stali nierdzewnej 316
Autorzy:
Lee, G.-G.
Jin, H.-H.
Chang, K.
Lee, B. H.
Kwon, J.
Powiązania:
https://bibliotekanauki.pl/articles/354713.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
atom probe tomography (APT)
radiation-induced segregation (RIS)
ion irradiation
irradiation defects
stainless steel
APT
RIS
stal nierdzewna
segregacja
Opis:
Stainless steel (SS) is a well-known material for the internal parts of nuclear power plants. It is known that these alloys exhibit radiation-induced segregation (RIS) at point defect sinks at moderate temperature, while in service. The RIS behavior of SS can be a potential problem by increasing the susceptibility to irradiation-assisted stress corrosion cracking. In this work, the RIS behavior of solute atoms at sinks in SS 316 irradiated with Fe4+ ions were characterized by atom probe tomography (APT). There were torus-shaped defects along with a depletion of Cr and enrichment of Ni and Si. These clusters are believed to be dislocation loops resulting from irradiation. The segregation of solutes was also observed for various defect shapes. These observations are consistent with other APT results from the literature. The composition of the clusters was analyzed quantitatively almost at the atomic scale. Despite the limitations of the experiments, the APT analysis was well suited for discovering the structure of irradiation defects and performing a quantitative analysis of RIS in irradiated specimens.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1179-1184
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extraction Factor Of Pure Ammonium Paratungstate From Tungsten Scraps
Współczynnik ekstrakcji czystego parawolframianu amonu z odpadów wolframowych
Autorzy:
Pee, J-H.
Kim, G. H.
Lee, H. Y.
Kim, Y. J.
Powiązania:
https://bibliotekanauki.pl/articles/356567.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
raw material
recycling
ammonium paratungstate
tungsten scraps
extraction
surowce
recykling
parawolfrawian amonu
odpady wolframowe
ekstrakcja
Opis:
Typical oxidation process of tungsten scraps was modified by the rotary kiln with oxygen burner to increase the oxidation rate of tungsten scraps. Also to accelerate the solubility of solid oxidized products, the hydrothermal reflux method was adapted. By heating tungsten scraps in rotary kiln with oxygen burner at around 900° for 2hrs, the scraps was oxidized completely. Then oxidized products (WO3 and CoWO4) was fully dissolved in the solution of NaOH by hydrothermal reflux method at 150° for 2hrs. The dissolution rate of oxidized products was increased with increasing the reaction temperature and concentration of NaOH. And then CaWO4 and H2WO4 could be generated from the aqueous sodium tungstate solution. Ammonium paratungstate (APT) also could be produced from tungstic acid using by aqueous ammonium solution. The morphologies (cubic and plate types) of APT was controlled by the stirring process of purified solution of ammonium paratungstate.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1403-1405
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of Copper Doped Neodymium Nickelate Oxide as Cathode Material for Solid Oxide Fuel Cells
Autorzy:
Lee, K. J.
Choe, Y-J.
Hwang, H-J.
Powiązania:
https://bibliotekanauki.pl/articles/351292.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solid oxide fuel cells
copper
electrical conductivity
excess oxygen
Opis:
Mixed ionic and electronic conducting K2NiF4-type oxide, Nd2Ni1-xCuxO4+δ (x=0~1) powders were synthesized by solid state reaction technique and solid oxide fuel cells consisting of a Nd2Ni1-xCuxO4+δ cathode, a Ni-YSZ anode and ScSZ as an electrolyte were fabricated. The effect of copper substitution for nickel on the electrical and electrochemical properties was examined. Small amount of copper doping (x=0.2) resulted in the increased electrical conductivity and decreased polarization resistance. It appears that this phenomenon was associated with the high mean valence of nickel and copper and the resulting excess oxygen (δ). It was found that power densities of the cell with the Nd2Ni1-xCuxO4+δ (x=0.1 and 0.2) cathode were higher than that of the cell with theNd2NiO4+δ cathode.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 625-628
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Incorporation of Resonators Into Plenum Window
Autorzy:
Lee, H. M.
Haris, A.
Lim, K. M.
Xie, J.
Lee, H. P.
Powiązania:
https://bibliotekanauki.pl/articles/176744.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
plenum window
Helmholtz resonators
noise pollution
ventilation
Opis:
A plenum window with incorporation of Helmholtz resonators in between two glass panes was tested in a reverberation room. The effects of jagged flap on reducing strength of diffracted sound was also investigated in the present studies where white, traffic and construction noises were examined Turing each set of experiment. When the noise source was located at the central line of the plenum window, the plenum window with Helmholtz resonators was able to mitigate 8.5 dBA, 8.9 dBA and 8.2 dBA of white, traffic and construction noises, respectively, compared with the case of without window. These amounts of noises that attenuated by the plenum window were slightly higher than the case where noise source was diverged 30° away from the plenum window. The effects of jagged flaps on the acoustical performance of the plenum window were negligible. The Helmholtz resonators had the best performance in the frequency region between 900 Hz to 1300 Hz where in this frequency range, the plenum window with Helmholtz resonators was able to attenuate additional 1.7 dBA, 1.9 dBA and 1.6 dBA of white, traffic and construction noises, respectively, compared with the case of without resonators.
Źródło:
Archives of Acoustics; 2018, 43, 4; 739-746
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Implementation of a Novel Audio Network Protocol
Autorzy:
Lee, J.
Jeon, H.
Choi, P.
Kwon, S.
Lee, S.
Powiązania:
https://bibliotekanauki.pl/articles/178062.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
audio mixer
AoIP
audio over internet protocol
DANTE
SR System
Opis:
Recently, the rapid advancement of the IT industry has resulted in significant changes in audio-system configurations; particularly, the audio over internet protocol (AoIP) network-based audio-transmission technology has received favourable evaluations in this field. Applying the AoIP in a certain section of the multiple-cable zone is advantageous because the installation cost is lower than that for the existing systems, and the original sound is transmitted without any distortion. The existing AoIP-based technology, however, cannot control the audio-signal characteristics of every device and can only transmit multiple audio signals through a network. In this paper, the proposed Audio Network & Control Hierarchy Over peer-to-peer (Anchor) system enables all audio equipment to send and receive signals via a data network, and the receiving device can mix the signals of different IPs. Accordingly, it was possible to improve the system-application flexibility by simplifying the audio-system configuration. The research results confirmed that the received audio signals from different IPs were received, mixed, and output without errors. It is expected that Anchor will become a standard for audio-network protocols.
Źródło:
Archives of Acoustics; 2018, 43, 4; 637-645
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morphology Change Of Si Deposit In Molten Salt Electrorefining
Zmiana morfologii osadu Si podczas elektrorafinacji w stopionych solach
Autorzy:
Ryu, H. Y.
Kwon, S. C.
Han, M. H.
An, Y. S.
Lee, J. S.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/354346.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
molten salt
silicon
morphology
electrorefining
current density
sól stopiona
krzem
morfologia
elektrorafinacja
gęstość prądu
Opis:
The effects of processing parameters on the morphology change in a Si deposit recovered by means of molten salt electrorefining are evaluated using electrochemical techniques such as cyclic voltammetry and chronopotentiometry at 800°C. It was found that concentration of K2SiF6 and current density were important parameters in determining deposit size. Higher concentrations of K2SiF6 were effective in coarsening the silicon deposit and decreasing the cell potential. Silicon nanofiber was recovered at 5 wt% of K2SiF6 whereas dense particles were prepared at 30 and 50 wt% of K2SiF6. The morphology of the Si deposit was determined by the concentration of Si in the electrolyte which is related to the formation of crystal and growth of Si. The formation mechanism of the Si deposit was interpreted by using high resolution TEM as well as electrochemical properties.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1491-1497
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of Mo-Si-B Intermetallic Compound Powders Under Different Heat Treatment Conditions
Autorzy:
Park, J. H.
Lee, S.
Kim, D.
Kim, Y.
Yang, S. H.
Lee, S. H.
Powiązania:
https://bibliotekanauki.pl/articles/353369.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Mo-Si-B alloys
intermetallic compounds
reitveld refinement
T2 phase
A15 phase
Opis:
In this research, we investigated the effects of reduction atmospheres on the creation of the Mo-Si-B intermetallic compounds (IMC) during the heat treatments. For outstanding anti-oxidation and elevated mechanical strength at the ultrahigh temperature, we fabricated the uniformly dispersed IMC powders such as Mo5SiB2 (T2) and Mo3Si (A15) phases using the two steps of chemical reactions. Especially, in the second procedure, we studied the influence of the atmospheres (e.g. vacuum, argon, and hydrogen) on the synthesis of IMCs during the reduction. Furthermore, the newly produced IMCs were observed by SEM, XRD, and EDS to identify the phase of the compounds. We also calculated an amount of IMCs in the reduced powders depending on the atmosphere using the Reitveld refinement method. Consequently, it is found that hydrogen atmosphere was suitable for fabrication of IMC without other IMC phases.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1509-1512
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies