Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Han, D." wg kryterium: Autor


Wyświetlanie 1-10 z 10
Tytuł:
An improved resonant thermal converter based on micro-bridge resonator
Autorzy:
Dong, L.
Han, J.
Zhang, P.
Zhao, Z.
Cheng, B.
Han, D.
Powiązania:
https://bibliotekanauki.pl/articles/220878.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermoelectric transfer difference
micro-bridge resonator
thermal converter
bifilar heater
Opis:
This paper presents the design, fabrication and testing of an improved thin-film thermal converter based on an electro-thermally excited and piezo-resistively detected micro-bridge resonator. The resonant thermal converter comprises a bifilar heater and an opposing micro-bridge resonator. When the micro-bridge resonator absorbs the radiant heat from the heater, its axial strain changes, then its resonant frequency follows. Therefore the alternating voltage or current can be transferred to the equivalent DC quantity. A non-contact temperature sensing mechanism eliminates heat loss from thermopiles and reduces coupling capacitance between the temperature sensor and the heater compared with traditional thin-film thermal converters based on thermopiles. In addition, the quasi-digital output of the resonant thin-film thermal converter eliminates such problems as intensity fluctuations associated with analogue signals output by traditional thin-film thermal converters. Using the fast-reversed DC (FRDC) method, the thermoelectric transfer difference, which determines the frequency-independent part of the ac-dc transfer difference, is evaluated to be as low as 1.1 · 10-6. It indicates that the non-contact temperature sensing mechanism is a feasible method to develop a high-performance thermal converter.
Źródło:
Metrology and Measurement Systems; 2018, 25, 4; 715-725
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Understanding the Oxide Dispersion Behavior of Yttria in Metal Matrix of MA956 Alloy through High-Energy Milling and Hot Press Sintering
Autorzy:
Swain, B.
Han, D.
Kim, G.-H.
Kong, M.-S.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/351770.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ODS
mechanical alloying
high-energy milling
oxide particle distribution
Opis:
MA956 (Fe-Cr-Al) alloy powder was high-energy ball milled with various amount of yttria contents (1,2,3, and 4 wt.%) to fabricate an oxide dispersion strengthened alloy. The milled powders were then consolidated using hot press sintering at 1150°C. The surface morphology and crystal structure of MA956 powder during the high-energy milling depending on the yttria contents was investigated using particle size analysis, X-ray diffraction, and scanning electron microscopy. The microstructural analysis of sintered alloy was performed using transmission electron microscopy and energy dispersive spectroscopy to evaluate the dispersion behavior of yttrium oxide. The results showed that, as yttria contents increased, the oxide particles became finer and are uniformly distributed during the high-energy milling. However, after the sintering, the oxide particles were coarsened with more than 3 wt.% of yttria addition.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1377-1381
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation and analysis of the loss and heat on damper bars in large tubular hydro-generator
Autorzy:
Liao, Y.
Fan, Z.-N.
Han, L.
Xie, L.-D.
Powiązania:
https://bibliotekanauki.pl/articles/141222.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
loss and heat
damper bars
tubular hydro-generator
electromagnetic field and temperature field
Opis:
In order to research the losses and heat of damper bars thoroughly, a multislice moving electromagnetic field-circuit coupling FE model of tubular hydro-generator and a 3D temperature field FE model of the rotor are built respectively. The factors such as rotor motion and non-linearity of the time-varying electromagnetic field, the stator slots skew, the anisotropic heat conduction of the rotor core lamination and different heat dissipation conditions on the windward and lee side of the poles are considered. Furthermore, according to the different operating conditions, different rotor structures and materials, compositive calculations about the losses and temperatures of the damper bars of a 36 MW generator are carried out, and the data are compared with the test. The results show that the computation precision is satisfied and the generator design is reasonable.
Źródło:
Archives of Electrical Engineering; 2013, 62, 1; 43-54
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antioxidant activity and mechanism in flower of Hylocereus undatus (Haw.) Britt. et Rose
Autorzy:
Li, X.
Gao, Y.
Han, W.
Lin, J.
Hu, Q.
Chen, D.
Powiązania:
https://bibliotekanauki.pl/articles/19838.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Hylocereus undatus flower is commonly used as food or for medicinal purposes in south China. To study its antioxidant activity and mechanism we used antioxidant and chemical assays to compare two commercial samples from different locations (Shenjing, Qixing). The difference in antioxidant levels corresponded with differences in chemical content (including total phenolics, total flavonoids, kaempferol and quercetin) between Shenjing and Qixing. The antioxidant ability of H. undatus flower seems attributable to total phenolics (mainly total flavonoids). Kaempferol is one of the main bioactive components. H. undatus flower exerts its antioxidant effects through metal chelation and radical scavenging via hydrogen atom (H•) and electron (e) donation.
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2013, 55, 1
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Double Step Sintering Behavior Of 316L Nanoparticle Dispersed Micro-Sphere Powder
Dwuetapowe spiekanie mikrosferycznych nanocząstek proszku 316L
Autorzy:
Jeon, B.
Sohn, S. H.
Lee, W.
Han, C.
Kim, Y. D.
Choi, H.
Powiązania:
https://bibliotekanauki.pl/articles/355221.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
316L stainless steel
nanoparticle dispersed micro-sphere
pulse wire explosion
sintering
stal nierdzewna 316L
spiekanie dwuetapowe
mikrosferyczne nanocząstki
Opis:
316L stainless steel is a well-established engineering material and lots of components are fabricated by either ingot metallurgy or powder metallurgy. From the viewpoints of material properties and process versatility, powder metallurgy has been widely applied in industries. Generally, stainless steel powders are prepared by atomization processes and powder characteristics, compaction ability, and sinterability are quite different according to the powder preparation process. In the present study, a nanoparticle dispersed micro-sphere powder is synthesized by pulse wire explosion of 316L stainless steel wire in order to facilitate compaction ability and sintering ability. Nanoparticles which are deposited on the surface of micro-powder are advantageous for a rigid die compaction while spherical micro-powder is not to be compacted. Additionally, double step sintering behavior is observed for the powder in the dilatometry of cylindrical compact body. Earlier shrinkage peak comes from the sintering of nanoparticle and later one results from the micro-powder sintering. Microstructure as well as phase composition of the sintered body is investigated.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1155-1158
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prediction of the height of overburden fractured zone in deep coal mining: case study
Prognozowanie wysokości strefy spękań w warstwach nadkładu w podziemnych kopalniach węgla: studium przypadku
Autorzy:
Han, Y.
Cheng, J.
Huang, Q.
Zou, D. H. S.
Zhou, J.
Huang, S.
Long, Y.
Powiązania:
https://bibliotekanauki.pl/articles/218745.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wysokość strefy spękań w warstwie nadkładu
symulacje numeryczne
układ ortogonalny
pomiary in-situ
the hei ght of overburden fractured zone
numerical simulation
orthogonal design
in-situ test
Opis:
In the process of coal extraction, a fractured zone is developed in the overburden above the goaf. If the fractured zone is connected with an aquifer, then water inrush may occur. Hence, research and analysis of the height of overburden fractured zone (HOFZ) are of considerable significance. This study focuses on the HOFZ determination in deep coal mining. First, general deformation failure characteristics of overburden were discussed. Second, a new method, numerical simulation by orthogonal design(NSOD), have been proposed to determinate the HOFZ in deep coal mining. Third, the validity of NSOD is verified in the practical application, compared with empiric al formula in Chinese Regulations and in-situ test. These three methods were applied to determine the HOFZ of working face No. 111303 in No. 5 coal mine. The pre dicted HOFZ of NSOD is found to be similar to the result of the in-situ test (8.9% relative error), whereas the HOFZ calculated by the empirical formula has extremely large error (25.7% relative error). Results show that the NSOD can reliably predict the HOFZ in deep coal mining and reduce time and expenses required for in-situ test.
W trakcie prowadzenia wydobycia węgla w warstwie skalnej leżącej ponad zrobami powstaje strefa spękań. Jeśli nieciągłości te związane są z formacjami wodonośnymi, może nastąpić nagły wypływ wód do kopalni. Stąd też waga problemu i konieczność badania wysokości strefy spękań w warstwach nadkładu zalegających nad wyrobiskiem. W pracy tej główny nacisk położono na określenie wysokości strefy spękań warstwy nadkładu zalegającej ponad wyrobiskiem w kopalni podziemnej. W pierwszej części pracy przedstawiono główne charakterystyki powstawania deformacji i pęknięć w warstwach nadkładu. Następnie zaproponowano nową metodę symulacji numerycznych w układzie ortogonalnym i jej wykorzystanie do określania wysokości strefy spękań w warstwach nadkładu w kopalni podziemnej. Następnie powyższą metodę zweryfikowano w praktycznym zastosowaniu, jako poziomy odniesienia wykorzystano odpowiednie wzory empiryczne określone w przepisach obowiązujących w Chinach oraz wyniki pomiarów in-situ. Powyższe trzy metody zastosowane zostały do określenia wysokości strefy spękań w warstwach nadkładu przy prowadzeniu ściany 111303 w kopalni węgla nr 5. Wyniki obliczeń wysokości strefy spękań uzyskane w oparciu o zaproponowaną nową metodę w dużym stopniu pokrywały się z wynikami pomiarów in-situ (błąd względny 8.9%); podczas gdy obliczenia wysokości strefy spękań w oparciu o odpowiednie wzory empiryczne obarczone były dużym błędem (błąd względny 25.7%). Uzyskane wyniki wskazują wiarygodność obliczeń w oparciu o zaproponowaną metodę, co pozwoli na ograniczenie czasu i kosztów związanych z wykonywaniem pomiarów in-situ.
Źródło:
Archives of Mining Sciences; 2018, 63, 3; 617-631
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Hydrophobic Surgical Forceps using Powder Injection Molding and Surface Treatment
Autorzy:
Park, D. Y.
Park, B. R.
Gal, C. W.
Lin, D.
Han, J. S.
Jeong, M.-S.
Bollina, R.
Hwang, W.
Park, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/352093.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder injection molding
hydrophobic
debinding
sintering
surface treatment
Opis:
Hydrophobic surgical forceps of end-effectors for laparoscopic operations or minimally invasive surgery were developed through powder injection molding (PIM) and surface treatment. Processing conditions for mixing, debinding, and sintering were investigated to produce defect-free components. An optimum solid loading was determined by torque rheometry experiments. The optimized processing conditions for debinding and sintering were designed through the measurement of weight loss and shrinkage behavior by thermogravimetric analysis and dilatometry experiments. After producing the surgical forceps based on the optimized processing conditions via PIM, surface treatment was carried out to generate the hydrophobic structure on the surface.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 473-480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Generation and characterization of a monoclonal antibody against duck Tembusu virus envelope protein
Autorzy:
Han, K.
Zhao, D.
Liu, Y.
Liu, Q.
Huang, X.
Yang, J.
Bi, K.
Xu, T.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/31495.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Duck Tembusu virus (DTMUV) is a newly emerging pathogenic flavivirus that has caused massive economic losses to the duck industry in China. Envelope (E) protein of DTMUV is an important structural protein, which is able to induce protective immune response in target animals and can be used as specific serological diagnosis tool. In this study, a novel monoclonal antibody, designated mAb 3E9, was generated against DTMUV E protein. It is positive in indirect ELISA against both His-E protein and the purified whole viral antigen. Also, this mAb showed positive reaction with DTMUV in Western blot and indirect immunofluorescence assay, and the isotype was IgG1. End-point neutralizing assay performed in BHK-21 cells revealed that the neutralization titer of 3E9 against DTMUV JS804 strain reached 1:50. Furthermore, functional studies revealed that 3E9 blocks infection of DTMUV at a step on viral attachment. The anti-E mAbs produced in the present work may be valuable in developing an antigen-capture ELISA test for antigen detection or a competitive ELISA test for antibody detection or therapeutic medicine for DTMUV in poultry.
Źródło:
Polish Journal of Veterinary Sciences; 2016, 19, 4
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of hip dysplasia on some biochemical parameters, oxidative stress factors and hematocrit levels in dogs
Autorzy:
Polat, E.
Han, M.C.
Kaya, E.
Yilmaz, S.
Kayapinar, S.D.
Coskun, S.
Yildirim, A.
Can, U.K.
Powiązania:
https://bibliotekanauki.pl/articles/2087150.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
alkaline phosphatase
hematocrit
hip dysplasia
creatine kinase
oxidative stress
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 4; 473-478
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of experimental infections of various Tembusu virus strains isolated from geese, ducks and chickens on ducklings
Autorzy:
Xu, T.
Huang, X.
Li, Y.
Liu, Q.
Liu, X.
Han, K.
Liu, Y.
Yang, J.
Zhao, D.
Bi, K.
Sun, W.
Powiązania:
https://bibliotekanauki.pl/articles/2087719.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
goose-derived
duck-derived
chicken-derived
Tembusu virus
pathogenicity
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 2; 389-396
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies