Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "chromium" wg kryterium: Temat


Tytuł:
Sorption and reduction of chromiumion ions by the chelating ion exchanger Diaion CR20
Autorzy:
Wójcik, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/109632.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
chromium(III)
chromium(VI)
reduction
ion exchange
speciation
chelating resin
Opis:
The chelating ion exchanger Diaion CR20 was applied for removal of chromium(VI) ions in the pH range from 1.5 to 10 and in the presence of 1 M H2SO4. The speciation analysis was used to predict the reduction process. Reduction of chromium(VI) to chromium (III) was observed during the chromium(VI) ions sorption. The kinetic parameters for the pseudo-first-order and pseudo-second-order, Elovich and intraparticle diffusion models were calculated. The most common three isotherm models: Freundlich, Langmuir and Dubinin-Radushkevich were used to describe chromium(VI) uptake. It was proved that the polyamine groups present in selected ion exchanger are able to sorb both chromium(VI) and (III) ions. The maximal sorption capacity towards chromium(VI) ions was estimated at pH 1.5 – 169.49 mg Cr(VI)/g and 159.31 mg Cr(VI)/g in 1 M H2SO4. Both static and column methods were used in the investigations.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 6; 1382-1393
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of Cr ohmic contact on graphitized 6H-SiC(0001) surface
Autorzy:
Grodzicki, M
Mazur, P
Wasielewski, R
Ciszewski, A
Powiązania:
https://bibliotekanauki.pl/articles/173424.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
silicon carbide
chromium
electric contacts
graphitization
Opis:
Ohmic electrical contacts were formed at room temperature on n-type, Si-oriented 6H-SiC substrates, with Cr layers vapor-deposited under ultra-high vacuum conditions on the samples being graphitized prior to the deposition. The contacts reveal a very good linearity of the local I–V characteristics. This method of ohmic contact formation does not require the use of samples with high doping concentration and the application of high-temperature annealing during the processing of contacts. Results of characterization of the contacts and of the in situ graphitization process of the SiC substrates, obtained by X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and atomic force microscopy (AFM) with conducting tip, are given in this paper.
Źródło:
Optica Applicata; 2013, 43, 1; 91-98
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quick and simple speciation analysis of chromium in cements
Autorzy:
Grabarczyk, Malgorzata
Wardak, Cecylia
Powiązania:
https://bibliotekanauki.pl/articles/2146952.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cement
extraction
chromium speciation
voltammetric determination
Opis:
The extraction of total Cr(VI) from commercially available cements, based on DTPA + 0.2 mol dm-3 (NH4)2SO4/NH4OH mixture solution and subsequent selective determination of Cr(VI) has been proposed. The determination was carried out using the adsorptive voltammetric stripping method. The study was conducted using three different commercially available cement samples. It has been checked that the proposed extraction procedure guaranteed no changes of chromium speciation during cement analysis. For comparison extraction was also carried out with the use of recommended by United States Environmental Protection Agency (EPA) Method 3060A, based on 0.28 mol dm-3 Na2CO3 + 0.5 mol dm-3 NaOH). Additionally, the extraction process was carried out using only distilled water as an extraction mixture which allows to evaluate concentration of only soluble Cr(VI) forms contained in cement. In all three cements, the content of soluble Cr(VI) was below 2 ppm, i.e. the limit value by European Union Directive 2003/53/EC.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 2; art. no. 144445
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of dead and living fungal biomass for removal of hexavalent chromium
Autorzy:
Holda, A.
Mlynarczykowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/109742.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hexavalent chromium
Aspergillus niger
biosorption
bioaccumulation
Opis:
The removal of hexavalent chromium from aqueous solution was carried out in batch experiments using dead and living biomass of Aspergillus niger. The effects of the operating parameters such as influent Cr(VI) concentration, influent pH and biomass concentration on the Cr(VI) reduction were investigated. The results indicates that the removal rate of Cr(VI) increased with a decrease in pH or with increase of Cr(VI) and biomass concentrations. For chromium bioaccumulation along with nutrients the process is the most intensive within the first 5 days of mycelium formation. For biosorption, the greatest binding of this metal is achieved within the first 4 days of the process.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 551-563
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficient chromium removal from aqueous solutions by precipitate flotation using rhamnolipid biosurfactants
Autorzy:
Shojaei, V.
Khoshdast, H.
Powiązania:
https://bibliotekanauki.pl/articles/110347.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
kinetics
wastewater
chromium
rhamnolipid biosurfactant
precipitate flotation
Opis:
In the present research study, the efficient removal of hexavalent chromium from aqueous solutions by precipitate flotation method was investigated. The experiments were carried out with the use of ferrous sulfate as a precipitating agent for chromium and rhamnolipid bio surfactant (RL) as a precipitate collector. The effects of rhamnolipid and co-precipitate concentrations, aeration rate, solution pH, and salt addition on the chromium removal were studied using a full factorial design. The chromium removal and water recovery to foam products were analyzed as process responses. Statistical analyses showed that the effects of all factors on the chromium removal followed a non-linear trend with a peak at the middle level. After the process optimization, the maximum chromium removal of 96.75±0.3% was obtained at pH value of 8, RL/Cr ratio of 0.01, Fe/Cr ratio of 3, and aeration rate of 50 cm3/min. Addition of salt with different cationic and anionic groups negatively influenced the removal efficiency. Kinetic studies suggested that the process of chromium removal by the precipitate flotation followed the first-order process with a rate constant of about 0.018 sec-1. Given the good removal capacity and kinetics, rhamnolipid biosurfactants can be a promising environmental-friendly bio collector for the removal of chromium ions from aqueous solutions.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 1014-1025
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective solvent extraction of some heavy metal ions from aqueous solutions by octafunctionalized resorcin[4]arenes
Autorzy:
Kończyk, Joanna
Dlugosz, Jan
Powiązania:
https://bibliotekanauki.pl/articles/110830.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
solvent extraction
lead
chromium
calixresorcinarene
metal removal
Opis:
This paper presents the results of the study on the extraction capacity of 1,8,15,22-tetra(1- heptyl)resorcin[4]arene and its octasubstituted derivatives containing thiophosphoryl, ester and amide groups in the presence of Pb(II), Zn(II), Cd(II) and Cr(III) in solvent extraction process. Effects of the structure and concentration of the resorcinarene extractant and the composition of the aqueous phase as well as its acidity on the efficiency and selectivity of removal of the examined metal ions from model aqueous solutions were determined. The 1:1 stoichiometry for complexes formed between Pb(II) and Cr(III) and the octasubstituted resorcin[4]arenes was determined by classical slope analysis and loading test.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 2; 271-285
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of chromium from aqueous solutions using Derris indica wood based activated carbon. Adsorption batch studies
Autorzy:
Ulaganathan, S.
Govindan, V.
Powiązania:
https://bibliotekanauki.pl/articles/950040.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorption
activated carbon
chromium
isotherms
adsorption kinetics
chromium removal
adsorpcja
węgiel aktywowany
chrom
izotermy
kinetyka adsorpcji
usuwanie chromu
Opis:
Adsorption efficiency in removal of chromium from waste water has been studied using Derris indica based activated carbon by conducting batch adsorption tests. Adsorption kinetics of chromium removal by Derris indica was examined by varying factors such as pH and concentration of synthetic solution and dosage of activated carbon. It has been found that the Derris indica based activated carbon is able to remove 80 mg/dm3 of chromium from aqueous solution by dosage of 0.8 g/150 cm3 with optimum contact time of 15 min. The isotherm data confirms with both Langmuir and Freundlich isotherm forms.
Źródło:
Environment Protection Engineering; 2013, 39, 3; 21-29
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biological removal of Cr(VI) ions from aqueous solutions by trichoderma viride
Autorzy:
Holda, A.
Kisielowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/109693.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bioaccumulation
chromium
Cr(VI)
microscopic fungi
Trichoderma viride
Opis:
The paper presents biological removing of Cr(VI) ions from aqueous solution by applying autochtonic fungi seedling of Trichoderma viride originated from chromium mud samples. The growth of organism and removing of chromium(VI) was performed in aqueous solution of various chromium(VI) contents and at optimal value of pH. During 14 days of incubation, samples of 5 cm3 each were collected every day for determination of chromium(VI) in solution and the efficiency of biological removal was specified. Since removal of chromium(VI) from aqueous solution may occur because of reduction, biosorption or bioaccumulation processes, to determine which one occurred, the Cr(III) contents were determined in samples of the medium as well in ooze after mycelium irrigating and in mycelium.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 1; 47-60
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetic modeling of chromium(III) extraction with aliquat 336 from alkaline aqueous solutions containing chlorides
Autorzy:
Wionczyk, B.
Powiązania:
https://bibliotekanauki.pl/articles/110327.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
extraction
chromium(III) chloride
Aliquat 33
kinetic analysis
Opis:
The effects of time, composition and history of preparation of the aqueous phase on the liquidliquid extraction of chromium(III) with Aliquat 336 from the aqueous alkaline solutions containing chlorides were studied. At time far from the equilibrium the yield and initial rate of the chromium(III) extraction depend on NaOH concentration, ionic strength of the aqueous phase and the way of its preparation. At the constant composition of the feed solution, rate of the Cr(III) extraction in approach to the equilibrium is higher when chromium(III) is extracted from the alkaline aqueous phase freshly prepared by direct dissolution of a weighted sample of CrCl3 than from that obtained by dilution of aged stock solution of CrCl3. Kinetic analysis by the mathematical models showed that within the whole period of time needed to reach the equilibrium, the rate of the Cr(III) extraction is limited by the second-, and third-order chemical reaction towards Cr(III), irrespective of composition and preparation history of the aqueous phase. The three-dimensional diffusion and chemical reaction at phase boundary substrateproduct (the contracting volume) models have a significant effect on the chromium(III) extraction within the initial extent of the process.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 2; 587-605
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of hexavalent chromium from aqueous solution by adsorption on γ-alumina nanoparticles
Autorzy:
Golestanifar, H.
Haibati, B.
Amini, H.
Dehghani, M. H.
Asadi, A.
Powiązania:
https://bibliotekanauki.pl/articles/207945.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorption
alumina
aluminum
chemicals removal
water treatment
chromium
chromium compounds
nanoparticles
sorption
alumina nanoparticles
hexavalent chromium
adsorpcja
aluminium
usuwanie chemikaliów
uzdatnianie wody
chrom
związki chromu
nanocząstki
sorpcja
nanocząstki tlenku glinu
chrom sześciowartościowy
Opis:
The use of γ-alumina (γ-Al2O3) nanoparticles as adsorbent to remove Cr(VI) from aqueous solution was investigated using batch experiments. Adsorption experiments were carried out for various initial doses of Al2O3, initial concentrations of chromium(VI), contact times and pH. The structure and morphology of the sorbent was characterized by XRD, SEM, and TEM techniques. Results demonstrated that the removal efficiency of chromium(VI) was increased by increasing the contact time, initial concentration, and pH. The results of the study showed that adsorption of chromium by γ-alumina nanoparticles reached equilibrium after 60 min and after that a little change of chromium removal efficiency was observed. Furthermore, kinetics of chromium sorption was well fitted by pseudo-second order kinetic model, and well explained by the Freundlich isotherm (R2 > 0.992). Overall, alumina nanoparticles recognized as an effective sorbent to remove chromium(VI) from aqueous solutions.
Źródło:
Environment Protection Engineering; 2015, 41, 2; 133-145
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utility of Chromobacterium violaceum SUK1a, an indigenous bacterial isolate for the bioremediation of Cr(VI)
Autorzy:
Prabhakaran, D. C.
Krishnan, S.
Ramamurthy, P. C.
Sivry, Y.
Quantin, C.
Subramanian, S.
Powiązania:
https://bibliotekanauki.pl/articles/109867.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
biosorption
bioremediation
chromium
bioreduction
Chromobacterium violaceum SUK1a
Opis:
The potential of an indigenous bacterial strain, Chromobacterium violaceum SUK1a, isolated from surface water samples collected from Sukinda Valley in Odisha, India, has been evaluated for the first time for the bioremediation of toxic hexavalent chromium (Cr(VI)) ions. The isolate was assessed for its Cr(VI) biosorption efficiency and the various parameters affecting the biosorption process were evaluated. A maximum Cr(VI) biosorption of about 50% was obtained, and the residual chromium was in the form of less toxic Cr(III). The Gibbs free energy of biosorption was determined to be -26.3 kJ/mol, suggestive of a chemisorption process. Additionally, the Cr(VI) biosorption by the isolate followed pseudo second order kinetics. FTIR spectral studies indicated that the surface functional groups present on the bacterial isolate such as, carboxyl, hydroxyl, amino, and phosphate groups were involved in the complexation of chromium ions with the bacterial cells. X-ray photoelectron spectroscopic studies on Cr(VI) interacted bacterial cells revealed an additional peak corresponding to Cr(III) in the Cr(2p) spectra. The surface charge of the bacterial cells subsequent to interaction with Cr(VI) were less negative compared to the pristine cells, which further substantiated the bioreduction of Cr(VI) to Cr(III). The bioremediation mechanism of Cr(VI) by the bacterial isolate is delineated to be governed by both biosorption and bioreduction processes under metabolism independent conditions. The results obtained indicate that the isolate can be a promising candidate for Cr(VI) bioremediation applications.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 4; 1266-1281
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of chromium(iii) transport through the double-carrier supported liquid membrane
Autorzy:
Religa, P.
Rajewski, J.
Lobodzin, P.
Powiązania:
https://bibliotekanauki.pl/articles/109375.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
SLM
chromium
D2EHPA
Cyanex27
separation
membrane
Opis:
The kinetics of chromium(III) transport through a supported liquid membrane containing both a di-(2-ethylhexyl) phosphoric acid (D2EHPA) and bis-(2,4,4-trimethylpentyl) phosphinic acid (Cyanex272) as an ions carrier was investigated. It was found that under a characteristic concentration of the carriers into the organic phase membrane provides much higher efficiency than the membrane containing only one of the extractants. In the studied system the optimal carrier concentration in the membrane is 0.16 mol/dm3 and 0.9 mol/dm3 for Cyanex272 and D2EHPA, respectively. Moreover, the authors indicate that only D2EHPA can act as an individual carrier in the membrane. In the case of Cyanex272 the stable structures with chromium(III) ions are formed in the membrane, which prevents effective re-extraction. Additionally, intensive stirring of an aqueous phase in another factor that has a positive influence on the transport kinetics in the double-carrier membrane. Increasing a stirring rate up to 1200 rpm shortens the process time and allows total re-extraction of chromium.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 87-97
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extraction properties of tetraheptylresorcin[4]arenes in relation to Cr(III) ions
Autorzy:
Konczyk, J.
Miroshnychenko, S.
Kozlowski, C.
Powiązania:
https://bibliotekanauki.pl/articles/109751.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
solvent extraction
resorcin[4]arenes
chromium(III)
cadmium(II)
zinc ions
Opis:
Resorcin[4]arene-based ligand bearing four heptyl chains at the lower rim of the molecule was prepared and modified by four tetradietoxyphosphoryl groups in the upper rim. The compounds obtained were characterized by NMR spectroscopy and their extractability toward chromium(III) ions was studied. The influence of process parameters such as the pH of aqueous phase, agitation time and also extractant’s structure and concentration on efficiency of Cr(III) ions solvent extraction is presented. The highest yield of Cr(III) solvent extraction was obtained for two-hour agitation time of 5.010−4 M metal solution of pH 5.0 and 5.010−3 M chloroform solution of the tetradietoxyphosphorylated derivative of heptyl-resorcin[4]arene. Under optimal conditions, competitive solvent extraction of Cr(III), Zn(II), and Cd(II) ions was performed and separation factor values were established as 77.0 and 24.9 for Cr(III)/Cd(II) and Cr(III)/Zn(II) ions pairs, respectively. The stoichiometry of formed metal-ligand complexes 1:1 was found by classical slope analysis method.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 835-844
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of neutralizing substances on the content of trace elements in soil contaminated with cobalt
Autorzy:
Kosiorek, Milena
Wyszkowski, Mirosław
Powiązania:
https://bibliotekanauki.pl/articles/207329.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cobalt content in soil
elements in soil
charcoal
chromium
fertilizers
węgiel drzewny
zawartość kobaltu w glebie
chrom
nawozy
Opis:
The aim of the study was to determine the effect of increasing doses of cobalt (0, 20, 40, 80, 160, 320 mg/kg d.m. of soil) on the total content of trace elements in soil after application of manure, clay, charcoal, zeolite and calcium oxide. The neutralizing substances were applied at 2% of the soil weight, and calcium oxide at a dose corresponding to one hydrolytic acidity. The content of the cobalt, cadmium, lead, chromium, nickel, zinc, copper, manganese and iron was determined in soil. The contamination of soil with cobalt and the application of neutralizing substances had significant effects on the total content of trace elements in soil In the series without substances, the soil contamination with cobalt increased the content of cobalt, lead, chromium, nickel and zinc in soil. All the neutralizing substances reduced the content of cobalt, manganese and iron in soil. The highest decrease in the cobalt content was observed in the series with manure, whereas the highest decrease in zinc occurred after addition of charcoal. The decrease in the content of the other metals (except nickel and lead) was observed in the pots with CaO and zeolite. The effect of other neutralizing substances depended on the trace element.
Źródło:
Environment Protection Engineering; 2019, 45, 1; 45-55
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and corrosion resistance of Co-Cr-Mo alloy used in Birmingham Hip Resurfacing system
Autorzy:
Dobruchowska, E.
Paziewska, M.
Przybyl, K.
Reszka, K.
Powiązania:
https://bibliotekanauki.pl/articles/306647.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
stopy kobaltu
stopy chromu
stopy molibdenu
karbid
odporność korozyjna
polaryzacja potencjodynamiczna
stal nierdzewna
stal azotowana
cobalt-chromium-molybdenum alloy
Birmingham Hip Resurfacing
carbide
precipitation
corrosion resistance
potentiodynamic polarisation
nitrided stainless steel
Opis:
The endoprostheses made of cobalt-chromium-molybdenum (Co-Cr-Mo) alloys belong to the group of the most popular metallic implants used for hip joints reconstruction. For such biomaterials, the primary goal is correct and long-term functioning in the aggressive environment of body fluids. Therefore, the purpose of this study was to examine both the morphology and the corrosion resistance of implants made of the cobalt alloy used in Birmingham Hip Resurfacing (BHR) system (Smith & Nephew). For comparative purposes, the electrochemical studies were done for the nitrided stainless steel – Orthinox. Methods: Observations of the microstructure of the investigated material were performed by means of the optical metallographic microscope and the scanning electron microscope. Furthermore, Energy Dispersive X-ray Spectroscopy was used to analyse the chemical composition of the endoprosthesis. Characterisation and evaluation of electrochemical corrosion resistance of the selected alloys were performed by potentiodynamic polarisation tests. Results: The structural studies confirmed that Co-Cr-Mo (BHR system) is characterised by a typical dendritic microstructure with carbide precipitates, mainly M23C6, within the interdendritic areas. Results of the polarisation measurements showed that the investigated cobalt alloy exhibits lower corrosion potential than Orthinox in the utilised environments (3% NaCl, simulated body fluid – Hank’s Body Fluid). Conclusions: However, the high passivation ability of the Co-Cr-Mo alloy, as well as its resistance to the initiation and propagation of localised corrosion processes, indicate that this material is significantly more appropriate for long-term implants.
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 2; 31-39
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies