Temat: element test - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Numerical study of dynamic response of reinforced concrete bridge induced by selected heavy vehicle
Autorzy:: Szurgott, P.
Smolarz, M.
Powiązania:: https://bibliotekanauki.pl/articles/244088.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dynamic test
bridge
vehicle
finite element method
LS-DYNA
Opis:: The main aim of this study is to carry out dynamic simulations of structural response of reinforced concrete bridge loaded with a moving heavy vehicle. Computational dynamics analysis was conducted using LS-DYNA computer code. The selected bridge was a reinforced-concrete structure located on the U.S. 90 in Northwest Florida. The bridge has six prestressed AASHTO type III beams and concrete deck. An 8-axle vehicle including a tractor unit and a low bed trailer were selected as a representative for the study. FE model of the tractor based on previous studies; however, a FE model of the trailer was developed for the present work. Analyses included passages of a vehicle with 47 tonnes cargo. A cargo resting on a trailer was taken into account by changing the material density of selected components in the semi-trailer FE model. Time histories of the bridge deflections in the middle of the span were recorded during the simulation tests. Simulations were performed for the vehicle velocity between 20 and 50 mph, stepped by 5 mph. An influence of the velocity on the bridge deflection was determined. The main objective of the simulation tests on the selected bridge was to assess the actual dynamic load allowance (DLA), also known as impact factor, based on the maximum deflection of the bridge span as a function of the vehicle velocity.
Źródło:: Journal of KONES; 2016, 23, 4; 505-512
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Numerical analysis of impact between shunting locomotive and selected road vehicle
Autorzy:: Dziewulski, P.
Stankiewicz, M.
Szurgott, P.
Powiązania:: https://bibliotekanauki.pl/articles/245955.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: finite element method
dynamic analysis
crash test
railway vehicle
LS-DYNA
Opis:: The main aim of this study is to carry out dynamic finite element analysis of a crash between shunting locomotive and selected road vehicle. Numerical simulations include side impact of the running locomotive in the vehicle situated across the track. A considered locomotive based on a popular Polish shunting locomotive – SM42. However, the tested locomotive was slightly modernized in comparison with the original one. Finite element model of the locomotive was developed by the authors whereas the vehicle FE model was download from the free database of such models. FE analysis was carried out according to the PN-EN 15227 standard which provides crashworthiness requirements for railway vehicle bodies. 15 tons large truck was selected as a representative for the study. One of the design collision scenario includes such deformable obstacle for railway vehicles operated on national and regional networks. LS-DYNA computer code was used for the simulations. The paper presents selected results of analysis generally focused on the locomotive frame behaviour. Contours of stress for selected moments of time are presented. Moreover, time histories of selected parameters are depicted. The energy balance was also checked in order to confirm the accuracy of analysis. The current study is a part of the project focused on modernization of the SM42 locomotive. Therefore, it is required to evaluate the locomotive behaviour during the impact test. Dynamic numerical simulation are acceptable since the experimental tests on the complete objects under consideration are impractical and impossible at the moment.
Źródło:: Journal of KONES; 2014, 21, 4; 87-94
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Simulations of front impact between two shunting locomotives at different velocities
Autorzy:: Szurgott, P.
Kozioł, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/244509.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: finite element method
dynamic analysis
crash test
railway vehicle
LS-DYNA
Opis:: The main aim of this study is to carry out dynamic simulations of a crash between two identical shunting locomotives running at different velocities. Numerical analyses using a Finite Element Method (FEM) include front-end impact of the running locomotive with a stationary one situated on the track. Such collision scenario is required for railway vehicles operated on national and regional networks. A considered locomotive based on a Polish shunting locomotive – SM42, however the tested locomotive was slightly modernized. Finite element model of the locomotive was developed by the authors. FE analyses were conducted according to the PN-EN 15227 standard, which provides crashworthiness requirements for railway vehicle bodies. LS-DYNA computer code was used for the simulations. The paper presents selected results of analyses focused on the locomotive frame behaviour. Simulations were performed for the vehicle between 20 and 90 km/h. An influence of the impact velocity on some output quantities was determined. Contours of effective stress for selected moments of time as well as time histories of selected values are depicted. For modernized locomotives, it is required to evaluate their behaviour during the impact test. Dynamic numerical simulation is acceptable since the experimental tests on the complete objects under consideration are impractical and impossible sometimes.
Źródło:: Journal of KONES; 2016, 23, 2; 381-388
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Numerical analysis of the front impact between two shunting locomotives
Autorzy:: Dziewulski, P.
Konarzewski, M.
Szurgott, P.
Powiązania:: https://bibliotekanauki.pl/articles/245458.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: finite element method
dynamic analysis
crash test
railway vehicle
LS-DYNA
Opis:: The main aim of this study is to carry out dynamic finite element analysis of a crash between two identical shunting locomotives. Numerical simulations include front-end impact of the running locomotive with a stationary one situated on the track. The first design collision scenario includes such obstacle for railway vehicles operated on national and regional networks. A considered locomotive based on a popular Polish shunting locomotive – SM42. However, the tested locomotive was slightly modernized in comparison with the original one. Finite element model of the locomotive was developed by the authors. FE analyses were carried out according to the PN-EN 15227 standard, which provides crashworthiness requirements for railway vehicle bodies. LESS-DYNA computer code was used for the simulations. The energy balance was initially checked in order to confirm the accuracy of analysis. The paper presents selected results of analyses focused on the locomotive frame behaviour. Contours of effective stress for selected moments of time are presented. Time histories of selected parameters are also depicted. The current study is a part of the project focused on modernization of the SM42 locomotive. Therefore, it is required to evaluate the locomotive behaviour during the impact test. Dynamic numerical simulation is acceptable since the experimental tests on the complete objects under consideration are impractical and impossible at the moment.
Źródło:: Journal of KONES; 2014, 21, 3; 81-88
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Development of finite element model of shunting locomotive applicable for dynamic analyses
Autorzy:: Dziewulski, P.
Szurgott, P.
Powiązania:: https://bibliotekanauki.pl/articles/247466.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: finite element method
modelling
dynamic analysis
crash test
railway vehicle
LS-DYNA
HyperMesh
Opis:: The main aim of this study is to develop a finite element model of the hybrid-shunting locomotive. Considered locomotive is based on a popular shunting locomotive in Poland – SM42. All components above the locomotive frame could be modified in comparison to the original object, whereas a chassis was essentially unchanged. Such solution allows the operators freely configure components e.g. diesel engine, generator, cooling module, cab etc., according to their own requirements. Works on the FE model were focused on very accurate reflection of the locomotive frame since the planned dynamic analyses include crash tests. FE model of the frame has a fine mesh and it is considered as a deformable component. Other segments of the vehicle are simplified and treated as rigid bodies mostly. FE model was developed on the basis of the locomotive CAD model. It was decided to transform the CAD model of the frame into the FE one applying the midsurface procedure. Such approach is correct since the locomotive frame is made of a large number of steel elements in the form of sheet metal plates and sections welded together. Altair Hyper Mesh software was used in the FE model developing process. Appropriate connections between respective components of the model e.g. wheelset – bogie, bogie – locomotive frame, were applied. Finally, the locomotive FE model consists of about 116 thousands of finite shell and solid elements and about 125 thousands of nodes. Dynamic analyses of the locomotive FE model will be carried out using LS-DYNA computer code.
Źródło:: Journal of KONES; 2014, 21, 4; 95-102
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "element test" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język