Temat: electric drive - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Hybrid drive application for high-speed tracked vehicle
Autorzy:: Mężyk, A.
Czapla, T.
Klein, W.
Powiązania:: https://bibliotekanauki.pl/articles/244179.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
tracked vehicle
hybrid drive
electric drive
Opis:: Analysis of possible hybrid drive for tracked vehicle solutions and also concept vehicle project is presented in the paper. Study ofpresent tracked vehicle state-of-art shows that in case majority of currently designed and developed military tracked vehicles projects modifications hybrid propulsion is taken into account. Based on that, authors have decided to develop concept hybrid tracked vehicle study. Basic parameters of concept vehicle are described at the beginning: total vehicle mass up to 14 Mg, maximum speed over 60 km/h and also possibility of stealth operation at the low speed using electric energy stored in batteries. Then, analysis of hybrid electric drives configurations is presented. Three versions of hybrid electric propulsions are considered: two series hybrid drives and one parallel. Then final version is chosen for further development with discussion on justification of the choice description. dynamic model assumptions and modelling methods are described in next section. As a result of simulation, acceleration diagrams for chosen operation modes are shown. As the final stage of concept study, virtual 3D model was built. Virtual modelling methods are used to optimize transmission components layout in a concept tracked vehicle hull.
Źródło:: Journal of KONES; 2009, 16, 1; 341-349
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Model of vehicle electric drive system
Autorzy:: Pawelski, Z.
Zdziennicki, Z.
Powiązania:: https://bibliotekanauki.pl/articles/245296.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
electric vehicle
energy storage
electric drive
driving cycle
battery model
Opis:: Models of electrical energy storage devices – a battery and a supercapacitor – as well as models of motor and a control system, were used to feature the work of a hybrid electric drive system. The models were adapted to simulate driving with a given driving cycle, in a quasi-static method, with the use of MATLAB-Simulink software. The advantage of this method is that calculations can be done quickly and results can be easily compared. A battery model enables determining voltage and charge level in relation to load current and temperature. The basic parameter of a battery is a nominal capacity. It is a measure of energy stored in the battery, which can be absorbed within discharge time, in conditions of temperature and current. The energy can be absorbed until the minimal voltage is reached in the clips. The article presents simulation of calculations lead that the described electric drive model. The model makes it possible to analyse different concepts of steering the whole system already in the initial phase. In particular, the article presents PMSM model and trajectories of selected parameters during a trapezoidal driving cycle.
Źródło:: Journal of KONES; 2017, 24, 3; 211-220
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Modelling of a permanent magnet motor with an inverter in a drive system of a car. Part 2
Autorzy:: Pawelski, Z.
Uszpolewicz, G.
Powiązania:: https://bibliotekanauki.pl/articles/245003.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: electrical machines
permanent magnet motor
inverter
electric drive control system
Opis:: The article presents a mathematical model of a permanent magnet motor, powered by a three-phase source of sinusoidal voltage, and a control method. Cooperation between numerical integration algorithms in the differential equation system of the motor and an inverter has been verified. The results of numerical simulations are presented in a graphic form. This article is an extension of the publication [12], in which a model of a drive system was proposed, consisting of: a battery, a supercapacitor and a method of controlling these energy sources during a driving cycle of a vehicle. For vector control, the mathematical model of a synchronous machine in the dq coordinate system is the most common one. The most important feature of this control method is the fact that the iq component of the rotor current vector determines the value of motor torque, and the component id – the value of magnetic flux. In the article, the emphasis is put on how inverters work. Their basic task is to generate such currents iabc or voltages uabc to obtain torque without ripples. It leads to development of different control concepts for achieving this goal, which are related to the modelling of magnetic fluxes in a stator and in an inverter.
Źródło:: Journal of KONES; 2018, 25, 4; 325-335
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Prototype of electric bus of AMZ Kutno
Autorzy:: Pawelski, Z.
Maciejczyk, A.
Wróbel, T.
Powiązania:: https://bibliotekanauki.pl/articles/244239.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: electric bus
electric drive system
electric motor
inverter
microprocessor control system
pack of batteries
batteries management system
supercapacitor
energy recuperation system
Opis:: The article discusses the prototype bus AMZ Kutno electrically driven. The aim of the project prototype electric powered bus was appointed a consortium consisting of AMZ Kutno and Department of Vehicles and Fundamentals of Mechanical Engineering of Technical University of Lodz. As a subcontractor prototype solutions involved: for battery power BMZ Gliwice, and for the control system ENIKA Lodz. The prototype bus with complete drive system is an entirely polish construction. The paper presents assumptions for the construction of a prototype electric drive system. It describes the criteria for the selection of the engine. Was analysed the available parameters of electric motors. Adopted electric motor is discussed in detail in terms of its performance characteristics. Required performance characteristics of electric motor shown in figure. The considerations taken into account and the aspect of the selection of the inverter and the microprocessor control system control the amount of energy in batteries and supercapacitors, depending on the instantaneous energy demand and the expected driving performance. Was compared the parameters of available batteries and set them the necessary capacity. It has been specified parameters of adopted battery pack. Was described the role and selection of supercapacitors in energy recuperation system provided. The assumptions were supported by the necessary calculations.
Źródło:: Journal of KONES; 2014, 21, 1; 197-204
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Conversion of energy in electric drive supported by the hydrostatic drive
Autorzy:: Grzesikiewicz, W.
Makowski, M.
Knap, L.
Pokorski, J.
Powiązania:: https://bibliotekanauki.pl/articles/247488.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: numerical simulation
hybrid drive
electric drive
hydrostatic drive
energy conversion
city traffic
symulacja numeryczna
napęd hybrydowy
napęd elektryczny
napęd hydrostatyczny
konwersja energii
ruch miejski
Opis:: In the article, a study of conversion of energy in a hybrid (electro-hydrostatic) drive of a utility van intended for city traffic is described. In this hybrid drive, the electric drive is periodically accompanied by hydrostatic drive, especially during acceleration and regenerative braking of the vehicle. We present a mathematical model of the hybrid drive as a set of dynamics and regulation equations of the van traveling at a given speed. On this basis, we construct a computer program, which we use to simulate the processes of energy conversion in electro-hydrostatic hybrid drive. The main goal of the numerical simulation is to assess the possibility of reducing energy intensity of the electric drive through such a support of the hydrostatic drive. Our results indicate that it is possible to significantly increase the efficiency of energy conversion in the electric drive by support of the hydrostatic drive. In the article, chosen results of simulation studies for multiple starting and braking the car are given, and they show a 30% decrease for energy drawn by the hybrid drive, compared to solely electric drive.
Źródło:: Journal of KONES; 2018, 25, 1; 143-150
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Ecological city car, concepts, design and realization
Autorzy:: Grzegożek, W.
Powiązania:: https://bibliotekanauki.pl/articles/244072.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: city transport
green cars
hybrid drive line
electric car
car body design
Opis:: The paper deals with concepts, design and realization of a small ecological city car. A small, electric car is anticipated to be a solution to city traffic problems. The future users of a city electric car have been defined. City car should be characterized by the following features: low cost of purchase and maintenance, high functionality, possibilities of movement in zero emission zone, large space and easy access to luggage compartment, simplicity of parking manoeuvres, possibilities of customizing a car body features. These features made this car a perfect means of transport for the elder and disabled. Three versions of a city car with different drive lines are considered. The same car body for each version is proposed. The car chassis is also the same in each version. The version l of city car is made. It is an L6e class car. This prototype allows carrying out some research on a new electric motor, new kind of batteries and working out the control units for cooperation between the electric motor and generator. In the paper the basic performances of the car are presented and its main parł the structure is shown. Features of the next version of small ecological city car are described as well as their advantages.
Źródło:: Journal of KONES; 2009, 16, 1; 157-164
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Researches on power transmission systems of traction vehicles with a hybrid drive
Autorzy:: Kozłowski, M.
Plich, M.
Powiązania:: https://bibliotekanauki.pl/articles/244193.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
hybrid drive vehicles
unconventional power supply sources
electric machines
energy accumulators -super capacitors
Opis:: The structures of modern traction vehicles are based on new generation devices. Technical progress within the field of power transmission concerns such elements as sources of power supply, electric devices and energy electronic solutions in power transmission systems. The prototypes of traction vehicles being currently drawn up are hybrid vehicles using different kinds of sources of power supply ofpower transmission systems, the most important of which are combustion engines, contact systems, supercapacitors (ultracapacitors), accumulators and fuel cells. Main engines are usually electric machines. In energy electronic starting systems it is permissible to use all kinds of main electric engines, for example, direct-current motors (inline engines, commutator motors with permanent magnets or non-commutator motors) or three-phase motors of alternating current (induction and synchronous). This means a complete change of rules in energy managing in a vehicle. Sources of energy can have the function of basic power supply (contact system, combustion engine or combustion cell) or the function of power supply support (supercapacitors, accumulators or fuel cell). New functions of drive operation will be available, namely, leveling of basic power supply load, recuperation of braking energy of the whole train set, driving at the temporary disconnection of basic power supply (short-term application of accumulator as basic power supply). Each of the above functions can contribute to the improvement of watt-hour efficiency of the system or to prolonging the range of driving. Therefore, it is necessary to undertake research on new generation power transmission systems. Research tasks focus on measurement of state variables of a drive, analyses of traction signals, modeling of drive operation in the conditions of driving cycle realization, verification of a model, drawing up a strategy of energy management in order to achieve the best watt-hour efficiency and the range of driving. In the article presented, sample results of researches on applications of hybrid power transmission systems conducted in various national research centers will be demonstrated. They concern both theoretical research (model simulation) and prototype research. The conception will be presented of a laboratory station for conducting research on modern sources of power supply and drives, which is currently being built at the Faculty of Transport of Warsaw Polytechnic at the Division of Exploitation of Tracking Systems and Electric Equipment in Transport.
Źródło:: Journal of KONES; 2008, 15, 2; 233-238
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "electric drive" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język