Autor: Wróbel, M. R. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Diagnostic telemetry system
Autorzy:: Wróbel, R.
Andrych-Zalewska, M.
Dimitrov, R.
Powiązania:: https://bibliotekanauki.pl/articles/247650.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: telemetry
IPv6
EOBD
Opis:: The theoretical aspects of diagnostics and diagnostic methodology are an important issue. Apart from theoretical aspects, this paper presents experiment results and a practical implementation example. Telemetry has a numbe of different definitions, depending on the area of application. It is generally defined as data acquisition at a remote, inconvenient and/or dangerous location and subsequent transmission of the data to another location for analysis. Telemetry systems are increasingly popular. The most widely used systems include the equipment for monitoring truck scales. The data obtained with this method allow estimating vehicle weight with accuracy between 90% and 98%. Currently a large number of ready-made, professional telemetry systems are commercially available. The LabView programming language used in this example allows for data visualization and acquisition. It also allows saving the executed program as an individual application. The measurements additionally included temperature, throttle position and battery voltage. Experiments proved that for stable communication an 80 kbps band is required. The commonly used telemetry systems, and even their custom-made original versions (as the one here presented), allow for remote diagnostics of an object using widely available communication technologies. The problem seems to be very development and requires further studies, which are scheduled in the near future.
Źródło:: Journal of KONES; 2016, 23, 4; 569-574
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The power impact of electric power assist in hybrid vehicle
Autorzy:: Andrych-Zalewska, M.
Chmielewska, P.
Wróbel, R.
Powiązania:: https://bibliotekanauki.pl/articles/242222.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: hybrid vehicle
Honda CR-Z
electric motor
Opis:: The current interest in the development of hybrid vehicles is a response to serious effects of road transport on the environment over recent years. In addition, vehicles equipped with this type of drive combine the advantages of a conventional diesel engine and electric motor. This results in higher system efficiency while reducing emissivity. This work seeks to demonstrate the effect of electric power on the total power of a hybrid vehicle. The research on the chassis dynamometer (MAHA LPS 3000) of the hybrid sports car, Honda CRZ, has been performed in three modes of operation: normal, economical and sport. The obtained results are presented in the form of graphs of external engine characteristics, where the influence of electric power on the system is visible. The tested vehicle is equipped with sixth version of Honda’s Integrated Motor Assist (IMA) technology, which is the crucial system, assisting the combustion engine in order to provide higher performance and better fuel economy.
Źródło:: Journal of KONES; 2017, 24, 4; 17-24
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Testing of internal combustion engines of motorcycles with the use of thermal imaging methods
Autorzy:: Magdziak-Tokłowicz, M.
Skrętowicz, M.
Wróbel, R.
Sroka, Z.
Powiązania:: https://bibliotekanauki.pl/articles/949484.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
thermal analysis
thermography
thermal research of motorcycles
Opis:: The internal combustion engine should be rated for the thermal loads that come from different sources. Thermal analysis is important both for design purposes and for evaluating the conditions of its use. Very good results are obtained by a combination of non-invasive measurement techniques, such as research using infrared thermal imaging techniques [3, 11]. The purpose of the study was to determine the engine thermal load by evaluating the average temperature on the outside surface of the engine at many of its points for two selected motorcycle engines with similar displacement capacities. For many reasons, such as ecology, durability, engine strength and thermal performance when heating and cooling are critical. To accomplish this task, a thermographic technique for indirect evaluation has been used, thus creating the possibility of measuring the temperature in a dynamic manner. These are accurate measurements and most importantly do not interfere with the construction of the object under investigation. The engine was tested during operation according to external and load characteristics. As a result of the work, graphs of temperature curves of heating and cooling of the tested engines were compiled. The article presents a methodology for measuring the temperature fields of outer surface engines. The collected material will be used in the future for studying the equable load on the cylinders, and as accurately as possible determine the conditions of movement such as power, revolutions, flow rates, temperatures and pressures.
Źródło:: Journal of KONES; 2017, 24, 4; 181-186
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Comparative analysis of the vibrations of a different kind of engine mounted in the same new motor vehicles
Autorzy:: Sitnik, L.
Magdziak-Tokłowicz, M.
Wróbel, R.
Powiązania:: https://bibliotekanauki.pl/articles/247090.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: laser Doppler vibrometry
engine vibration
vibration velocity
Opis:: The paper presents the results of tests carried out on two spark-ignition engines: 1.4BZ 90CV CD and 1.4BZ 120CV CD installed in new Fiat Bravo (model 198, version 54A) motor cars. The latter engine model (120CV) was equipped with a supercharging system. The research consisted in comparing engine vibrations measured in specific and representative points. In order to determine the vertical component vibrations, the measurements were performed via a mirror. A PSV-400 laser Doppler vibrometer made by Polytec was used to measure vibration velocities. The vibrometric system directly measures two quantities: displacement and velocity. In the investigated case, vibration velocity is the variable which supplies better diagnostic information. Vibrations were measured for the car standing on its wheels and for the car jacked up to reduce the influence of the car vibration damping systems on the measurement results. The latter are presented in the form of comparative diagrams. Moreover, the fast Fourier transform was used to determine the frequency distribution. Prior to that signal was subjected to conditioning operations using parametric windowing and filtering. Interesting conclusions emerge from the obtained results and on their basis the effect of the drive unit on the behaviour of the car body can be assessed for different engine types and rotational speeds. It is shown that the way in which the engine is mounted affects the vibrations of the car.
Źródło:: Journal of KONES; 2011, 18, 4; 443-448
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Contour of vibroacoustic map in diagnoses of engines failure
Autorzy:: Kaźmierczak, A.
Janicka, A.
Tkaczyk, M.
Wróbel, R.
Powiązania:: https://bibliotekanauki.pl/articles/242382.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vibroacustic maps
digital processing
automotive diagnosis
vibroacustic analysis
Opis:: Almost all engine failures have an influence on engine's vibration, which is described in the article .Of course not every time diagnostic system can report of that. This is a reason why detection of vibrations must be accomplished with high quality diagnostic systems. Therefore, Doppler laser Vibrometry based on scanner Polytec had been used. To achieve full diagnostic results multidimensional vibration's function has been invented, where the torque moment is used as an extra parameter. Measured vibrations were subjected to digital signal processing like windowing, fast Fourier transform, filtration byfinite impulse response windowed filters. The results of measure and processing per-form inform of contour 3 D plots, which indulge in speed estimate of the usefulness of presented method. Tested engine performance, vibration measurement parameters, adopted diagnostic circuit, Digital processing of vibration signal, Vibration versus torque and magnitude spectrum (contour vibroacoustic map) of engine in good working order; co = 2000 rpm, contour vibroacoustic map of engine in good working order; co = 4000 rpm, contour vibroacoustic map of engine with fail of injection system; co = 2000 rpm, contour vibroacoustic map of engine with fail of injection system; co = 4000 rpm, contour vibroacoustic map of engine withfail of turbo charger; co = 2000 rpm are presented in the paper.
Źródło:: Journal of KONES; 2009, 16, 2; 217-224
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Comparison of mileage fuel consumption with the natural operation of the three different cycles
Autorzy:: Sitnik, L. J.
Magdziarz-Tokłowicz, M.
Walkowiak, Wł.
Wróbel, R.
Włostowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/243579.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: fuel consumption
mileage fuel consumption
resistance to motion
energy consumption of traffic
vehicle operation
SI engine
Opis:: In the automotive industry in the world continuously being sought universal driving cycle. The test should closely match the fuel consumption and emissions of toxins in the fumes of the test vehicle in its real operating conditions [4]. However, in the previously developed solid driving tests established velocity profiles differ significantly from actual driving conditions. The difference in fuel consumption, comparing the natural operation of the NEDC test reaches an average of 18%. The new version of the driving cycle should be more realistic to the everyday use of additional equipment and gadgets that are installed in modern vehicles [1]. The impact on fuel consumption by vehicles may be conditioned not only by its size and weight, but also by the geometry of the track motion, forces causing the motion and the forces acting on the car when driving on curved tracks. The vehicle encounters and overcomes all the forces that act on it while driving-resistance movement. In the energy intake through the vehicle runs in the motor changes at the expense of the energy of fuel consumed. The driving force performs work on a given stretch of road balancing (predominant) friction. On the basis of the calculated resistance movement and the energy consumption of the movement in the selected object was a comparison of the actual consumption of fuel in the vehicle with the ignition spark. Analysis was performed and found differences in three cycles: urban, extra-urban and combined.
Źródło:: Journal of KONES; 2014, 21, 4; 439-444
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: NVH application research using accelerometers on a chassis dynamometer
Autorzy:: Sitnik, L.
Wróbel, R.
Andrych-Zalewska, M.
Mihaylov, V.
Powiązania:: https://bibliotekanauki.pl/articles/242905.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: NVH
LDV
chassis dynamometer
Opis:: Accelerometric tests, similarly to laser tests (with regard to human health) are something of novelty. All standards related to this issue refer to sound intensity (measured using specialised microphones). The work presents results of accelerometric tests conducted during driving cycles on an inertial load chassis dynamometer Maha LPS3000. The object of the research was Mazda 3 1.6 (petrol), built in 2010, mileage 70 thousand km. The tests were related to vibration measurements on a chassis dynamometer using various, forced tractive effort (300, 500 and 700 N). No additional signal processing was used (except for operations necessary to create a spectrum) so as to present the whole vibration spectrum with special emphasis on the resonance frequency of human organs. The article presents vibration amplitude measured at the level of the headrest for three forced tractive efforts: 300, 500 and 700 N. The measurements were made at the speed of 60 km/h in the fourth gear (which corresponds to about 2000 rpm). The obtained results, indicate that the maximum value of harmonics fall in the range 85-95 Hz. Hence, they are resonance frequencies of eyeballs. In addition to this, one can state that the values of these harmonics are higher for higher values of forced tractive efforts. This would mean that seats should be additionally stabilised (dampened) to limit the influence of dangerous vibration on a human organism.
Źródło:: Journal of KONES; 2016, 23, 3; 443-448
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Vehicle vibration in human health
Autorzy:: Sitnik, L.J.
Magdziak-Tokłowicz, M.
Wróbel, R.
Kardasz, P.
Powiązania:: https://bibliotekanauki.pl/articles/242806.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: noise and vibration
laser Doppler vibrometry
digital signal processing
Opis:: Fast development of technology over the last decades has contributed to the adverse effects that may affect human health (both physical and mental). Such negative effects may include noise and vibration. These phenomena are accompanied by most of the technological processes. Need for more efficient and productive processes is causing rising trend in intensifying of these phenomena. It is unavoidable to increase efficiency without increasing the operating speed of machinery and equipment. The main goal of this paper is to carry out NVH (noise, vibration and harshness) analysis of engines; compression-ignition engine (diesel) and spark-ignition engine (gasoline) equipped in the same type of vehicle. But purpose is laying on presented methodology, not results of researches (but of course it will be presented too) which often (mainly) is made for failure detections. This paper will also cover influence of the engine mounting on generated acoustic vibrations followed by comparative NVH analysis of states occurring in diesel and gasoline engine. Scope of the work: a) theoretical introduction, b) presentation of vibration measurement (using LDV: Laser Doppler Vibrometry), c) NVH analysis in two types of engines, d) comparison of results, e) conclusions.
Źródło:: Journal of KONES; 2013, 20, 4; 411-418
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Impact analysis of air humidity on operating parameters of diesel engine
Autorzy:: Haller, P.
Jankowski, A.
Kolanek, C.
Magdziak-Tokłowicz, M.
Wróbel, R.
Powiązania:: https://bibliotekanauki.pl/articles/246293.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: humidity
diesel engine
efficiency
engine power
engine torque
Opis:: A major problem in the combustion diesel engines is the different distribution of the mixture of air and fuel and also temperatures inside the combustion chamber. It helps the formation of points of the high and low oxygen concentration in the combustion chamber of the engine. In areas with a high concentration of oxygen, the combustion process produces very harmful NOx, and in places with low oxygen concentration, as a result of incomplete fuel combustion particles are created in the form of soot. This not regular distribution of the mixture of air and fuel and temperatures in the combustion chamber affect the limited maximum engine power and efficiency at his every operating cycle. One method for improving the combustion process is feeding into the engine air with high relative humidity. The study was conducted on a chassis dynamometer at the Department of Vehicles Engineering Wroclaw University of Technology. For the purposes of the study determined the external characteristics, including maximum engine power and maximum engine torque at different air relative humidity and quite similar air temperature. Analysis of the results of research shows that high air relative humidity has a positive effect on the work parameters of the diesel engine.
Źródło:: Journal of KONES; 2015, 22, 3; 37-42
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: The methodology of grade of gasification reactor effectivity
Autorzy:: Jagiełło, A.
Magdziak-Tokłowicz, M.
Górniak, A.
Trzmiel, K.
Włostowski, R.
Wróbel, R.
Powiązania:: https://bibliotekanauki.pl/articles/245745.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gasification
reactor
process effectivity
Opis:: Ecology problems are addressed in all areas of engineering. Gasification is widely used methodology, which allows to power vehicles and fuel generators via alternative fuel. The more it seems important to address the issues of gasification in the group of scientists dealing with machines. In article authors present results of methodology in effectivity of gasification graduation. The base of experiment is the complimentary reactor, which was made for gasification of different materials. Gases that are achieved on the output of the system are used to supply combustion engines. In article, expect mentioned methodology, authors present reactor build and measurement (including complimentary software) system, mounted on system. The new energy supplies are still discovered. At the same time, researchers on good know substances are in progress. In article, authors are presented one of the methods of gasification reactor effectivity. Authors’ reactor has a burning chamber, and outlet circuit. Presented methodology was relayed on E-E system with software part. System is contained a few thermocouples with multiplexing ADC card for acquisition of data. All parts are presented in an article. An article is a result of progressing grant in DEMONSTRATOR+ program (no. WND-DEM-1-527/001).
Źródło:: Journal of KONES; 2015, 22, 4; 109-116
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: The chemical properties of alternatiye fuel from Automobile Shredder Residue (ARS)
Autorzy:: Sobianowska-Turek, A.
Janicka, A.
Kolanek, Cz.
Wróbel, R.
Tkaczyk, M.
Powiązania:: https://bibliotekanauki.pl/articles/242323.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: Automobile Shredder Residue (ARS
end-of-life vehicles
Opis:: A technical object is wearing down and stop s to do its function what is connected with becoming a problem, in case of vehicles, especially in environmental aspect. The recycling rate of end-of-life vehicles (ELVs) has to increase to eighty-five per cent to 2014. Nowadays few methods of recycling can be mentioned. The most popular based on disassembly, second usage of recovered materials trough fragmentation and separation of raw materials and incineration of Automobile Shredder Residue (ARS) using maximum energy recovering and minimum emission causing processes. In this paper the methods of vehicle recycling was analyzed and discussed. Especially raw materials separation aspect was taken into consideration. An average sample of ARS which is a composition of materials like rubber, plastic, wood and fibers which is use as an alternative fuel for co-burning process in industry, was analyzed. Because of metals and organic compounds (PAHs - Polycyclic Aromatic Hydrocarbons, VOC's - Volatile Organic Compounds) toxic emission problem (combustion gas emission and waste emission with cinder) in ecology aspect it is very important to know chemical properties of burning fuel. The ARS very often consist potential hazardous on human health chemical compounds or compounds whose thermal treatment products are toxic. Even if concentration of potential dangerous compound is very low it can cause very serious consequences for environment and humans. The results of chemical properties investigation of alternative fuel from vehicle using AAS (Atomic Absorption Spectrophotometry) method are published in this paper. Also alternative solutions for those wastes (ARS) usage are proposed and discussed.
Źródło:: Journal of KONES; 2009, 16, 2; 413-419
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Transmission of vibrations from the engine to the car body
Autorzy:: Aleksieva, V.
Valchanov, H.
Magdziak-Tokłowicz, M.
Wróbel, J.
Włostowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/243558.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: LDV
laser Doppler vibrometry
car body
car suspension
Opis:: Vibrations have become an important factor of vehicles. Vibration tests help identify, and then tune the automotive vehicle to improve the structural strength. Due to the increasing development of vehicles and machines and their widespread use. Increased research-using vibrations due to their low or zero interference with the vehicle under test. Vibration testing is often carried out using Laser Doppler Vibrometry (LDV), a device that is used for contactless measurement of vibration on the surface. The laser beam is directed from the device to the surface of interest, and the amplitude and frequency of vibration are extracted from the Doppler shift frequency of the reflected laser beam due to the movement surface. High values of vibration transmitted from the engine, and the way significantly affect the body of the vehicle and the driver. Article presents results of research carried out on vehicles powered by three different engines and rpm. Tests were carried out on an engine dynamometer in the same environmental conditions. Two of engines were with spark ignition, including one with a supercharged engine and compression ignition engine. The measurements were made using the Laser Doppler Vibrometry using Fast Fourier Transform. The spectrum obtained is used for further analysis to determine the acceleration level at various frequencies. Obtained from Fast Fourier Transform readings used for drawing graphs of frequency V acceleration. The results of the study are interesting and promising, as they show a significant difference in the velocity for spark ignition engines and compression-ignition.
Źródło:: Journal of KONES; 2016, 23, 4; 17-23
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Wróbel, M. R." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język