Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kułażyński, M." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
The utilization of sorbents obtained from miscanthus using steam as the activation agent for wastewaters treatment
Autorzy:
Bratek, K.
Bratek, W.
Kułażyński, M.
Powiązania:
https://bibliotekanauki.pl/articles/779874.pdf
Data publikacji:
2007
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
odpady rolnicze
miskant
sorbenty
oczyszczanie wody
agricultural waste
Miscanthus
sorbents
wastewater treatment
Opis:
The possibility of obtaining sorbents with a good sorption capacity from miscanthus has been investigated. The chars and the activation products were obtained from the miscanthus in a rotary furnace. The activation process of miscanthus was carried out by water vapour at 700 - 800°C and at the activation time of 30 - 90 min. We found that the optimum conditions for the activation process were: the activation temperature of 750°C (activation time of 60 and 90 min) and 800°C (activation time of 45 or 60 min). For these conditions the sorbents with the best sorption capacity for p-chlorophenol, toluene, methylene blue and Congo red were obtained.
Źródło:
Polish Journal of Chemical Technology; 2007, 9, 2; 102-105
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of an active phase composition in the low-temperature nitric oxide reduction catalyst
Autorzy:
Kułażyński, M.
Bratek, K.
Walendziewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/777954.pdf
Data publikacji:
2007
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
NOx
SCR
katalizator
optymalizacja
nośnik mineralno-węglowy
catalyst
optimization
mineral-carbon carrier
Opis:
In the first research studies series a selection of the quantitative composition of catalyst active phase composition (iron, copper and manganese) deposited on mineral-carbon support was carried out. It was found on the basis of the selection studies series that the best results were attained when copper and manganese were used as catalyst components. The quantitative composition of the denitrogention catalyst was estimated using a statistical method of experiment planning and metals content changed in the range 0.5 - 1.5wt % for both metals. Catalyst activity in nitric oxide reduction by ammonia was determined in the dependence on an active phase composition in the temperature range 100 - 200° C, at GHSV (Gas Hour Space Velocity) 6 000 and 10 000 Nm3/m3h, NO concentration 400 ppm, NH3/NO ratio 1:1. A graphic presentation of the obtained results was made using the UNIPLOT program. The highest activity in nitric oxide reduction by ammonia presented copper - manganese catalysts prepared by the impregnation of mineral-carbon support with active metals salts solutions and calcination after each metal impregnation with copper (up to 1.5 wt %) and manganese (up to 1.5 wt %).
Źródło:
Polish Journal of Chemical Technology; 2007, 9, 3; 33-37
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of combustible wastes for the alternative fuels production
Autorzy:
Kułażyński, M.
Surma, A.
Walendziewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/778583.pdf
Data publikacji:
2007
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
odpady przemysłowe
odpady komunalne
paliwa alternatywne
wartość opałowa
kody odpadów
materiały palne
spalanie
industrial wastes
municipal wastes
alternative fuels
calorific value
waste codes
combustible materials
combustion
Opis:
The information on the quantity of various types of combustible wastes registered in the Lower Silesia Marshal Office over the 2003 - 2005 years (waste codes - 02, 03, 04, 07, 12, 15, 16, 17, 19 and 20) was collected and then the quantities of individual wastes from different sources were summarized depending on the waste sort i.e. waste paper (cellulose), plastics, timber, textiles and rubber. The physiochemical properties and the chemical composition of the impurities in the selected waste sorts were determined and discussed while taking into account their usefulness and the necessary treatment operations for the alternative fuels production.
Źródło:
Polish Journal of Chemical Technology; 2007, 9, 4; 43-47
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies