Temat: diagram - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Evaluation of current developments and trends in the diagnosis of marine diesel engines based on the indicator diagrams analysis
Autorzy:: Pawletko, R.
Polanowski, S.
Powiązania:: https://bibliotekanauki.pl/articles/244253.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion pressure sensor
indicator diagram analysis
Opis:: The paper analyses the current offer of combustion pressure sensors for use on marine engines under operating conditions, methods of data acquisition, methods of determining TDC position and methods of obtaining diagnostic information from the indicator diagrams. Terms of continuous work on marine engines themselves only: new ABB cylinder pressure sensor, the piezoelectric sensors from KISTLER and AVL companies, but with limitations, the main ones being stability at high temperature. Another important issue for the accuracy of mean indicated pressure and heat released characteristics determination is referred to TDC position on the indicator diagrams. TDC is appropriate thermodynamic point, it is hardly determinable in the presence of interference and lack of sufficient information – but is used, for example in ABB solution. One of the sources of diagnostic information is to analyse trends in some parameters, which, unfortunately, is very difficult in environments with varying engine loads. Further progress in the diagnostic use of indicator diagrams should be associated with the use of the heat released characteristics and the net internal efficiency, which as shown by the results of preliminary tests can be used to assess the accuracy of the injection and combustion of fuel, including gas fuel. Supplementing these methods may be the use of vibration and noise to detect certain malfunctions.
Źródło:: Journal of KONES; 2014, 21, 4; 389-396
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Assessment of the diagnostic suitability of net thermal efficiency of marine diesel engine
Autorzy:: Pawletko, R.
Polanowski, S.
Witkowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/247360.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
thermal efficiency
diesel engine diagnosis
Opis:: This article applies to searching for symptoms and diagnostic parameters pointing in a deterioration in the quality of the combustion process in marine diesel engines. It was assumed that diagnostic parameters should give clear information regardless of engine load or with respect to the mean indicated pressure. The proposed cycle and sectional net thermal (heat) efficiency characteristics and also dimensionless net heat release rate were analysed. In order to obtain the state of deterioration of the injection process simulation of discalibration (larger diameter) of injector holes was performed. The simulation was carried out by the enlarged of diameter of the injector holes form 0.375 mm to 0.385 mm. Deterioration of the formation and growth of fuel spray droplet diameter is result of such simulation. The study was conducted on a laboratory engine Sulzer Al25/30. The study was carried out according to active experiment plan, during which the selected engine failure of the injection system was simulated. Measurements of pressure of combustion were performed by means of tensometric sensors of Spice Company on the indicator valve. The analysis found that in the event of injector nozzle faults (discalibrated holes) significantly decreases the net thermal efficiency η c cycle, and there are significant oscillations of net
Źródło:: Journal of KONES; 2013, 20, 4; 327-332
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The Fourier transform as a new approach of evaluating the internal combustion engine indicator diagram
Autorzy:: Łoza, Ł.
Sitnik, L. J.
Powiązania:: https://bibliotekanauki.pl/articles/244677.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
Fourier transform
internal combustion engine
Opis:: In this paper, the authors present an introduction to the new method of evaluating the indicator diagram of internal combustion engine. For several years, it was observed that analyses of combustion processes have been hardly changed since they were conducted for the first time. At the moment, the diagrams are plotted more and more precisely owing to the new sensors and digital processors. Despite all of these high technical advantages, which were obviously unavailable in the past, theoretical approach for describing indicator diagram has not changed in significant way. Nowadays, the indicator diagrams are still evaluated very generally and are presented in much too idealistic way as a smooth curve of pressure changes, without any disturbances, which are being detected very easily now. Furthermore, it appears that performance improvements of the IC engines are in need of developing new methods for analysis and evaluation. The Fourier transform is a new way to look at the combustion process in the engines. It is basically a mathematical instrument for analysing different types of signals, which are transformed, from time domain into frequency domain. It enables identifying specific sinusoidal components of arbitrary signals and separates relevant ones from the noise. This allows one to see significant differences in two or more apparently similar signals and detect the crucial parts. If we treat pressure changes in time like a common signal, we can compute Fourier transform and see basic components of the diagram.
Źródło:: Journal of KONES; 2017, 24, 4; 173-180
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Novel method appointing of the effective heat release coefficient during combustion process based on real indicator diagram
Autorzy:: Jankowski, A.
Ambrozik, A.
Jankowska-Sieminska, B.
Ślęzak, M.
Powiązania:: https://bibliotekanauki.pl/articles/244287.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
working cycle
thermodynamics
indicator diagram
heat release
Opis:: An object of the paper is a novel method of effective heat release coefficient appointing during combustion process of the based on the real indicator diagram. The process quality of the heat release during process of combustion is evaluated by value of the effective heat release coefficient. Accepted assumptions at appointing effective coefficient of heat release refer to acceptable that thermodynamical parameters of the working charge according to points of the real indicator diagram and the computational diagram are such the same, the maximum pressure of real working cycle of the engine is equal to the pressure of the computational cycle, work of the working charge performed in period from point of closing of the inlet valve to point of the beginning of the exhaust process are for both considered working cycles equal, heat values of the carried to the real and computational cycle are such the same. The method of appointing of the self-ignition delay period is presented in the paper, using to this end intersection point of two graphs of temperature course of the working charge prepared for the first phase of combustion process. Other methods appointing characteristics is suggested in paper basing on the real indicator diagram. The graphic illustration of the preparing method of characteristics of the relative quantity of the heat release during combustion process is illustrated in paper.
Źródło:: Journal of KONES; 2007, 14, 4; 133-142
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Influence of clogged injector nozzles on the heat release characteristics
Autorzy:: Pawletko, R.
Polanowski, S.
Powiązania:: https://bibliotekanauki.pl/articles/243678.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
heat release characteristics
marine diesel engine diagnosis
Opis:: The paper presents the results of research of the influence of clogged injector nozzles in fuel injection system on the shape of heat release characteristics. The study was conducted on a laboratory four-stroke marine engine, type Sulzer 3Al 25/30, with nominal power Ne = 408 kW at nominal rotational speed n = 750 rpm. The study was carried out according to active experiment plan, during which the engine failure of the injection system was simulated. Simulation of loss of patency of injector nozzles (clogged) was to completely clog two holes of nine injection injector nozzle holes with a diameter of 0,325 mm. Measurements were made at a constant engine speed of 750 rev/min for five loads: 50, 100, 150, 200, 250 kW. Measurements of pressure of combustion were performed by means of tensometric sensors of Spice Company. Based on measured pressure curves heat release characteristics were determined. The algorithm allows the determination of net heat release rate q and the net generated heat Q characteristics. Based on the obtained results it can be concluded that significant improvement in the diagnostic use of indicator diagrams can be obtained by using heat release characteristics. These characteristics are correlated with the process of fuel injection and the injection pump operation. As demonstrated in the work of analysing the heat release rate q, it is possible to infer diagnosis on the technical condition of the fuel injection system.
Źródło:: Journal of KONES; 2013, 20, 3; 307-314
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Examination of fast-changing quantities in engine with common rail injection system
Autorzy:: Ambrozik, A.
Ambrozik, T.
Kurczyński, D.
Łagowski, P.
Powiązania:: https://bibliotekanauki.pl/articles/243895.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
common rail
multi-phase injection
indicator diagram
Opis:: The paper aims to present the results of investigations into the engine with Common Rail system that performs multi-phase injection. The scope of investigations included measurements and assessment of fast-changing quantities. The paper provides the research stand description and a block diagram o f the system for taking measurements offast-changing quantities, including the system measuring the intensity of the current that controls the injector operation. The experimental results discussed in the paper were derived from introductory investigations into measurements of the air-fuel mixture pressure in the engine cylinder and those of the injector needle lift, which were assessed on the basis of measurements of the intensity of the injector-controlling current. Tests were performed while the engine operated under external speed characteristics and under load characteristics at the crankshaft rotational speed n=l200 rpm and n =3800 rpm. During tests, depending on speed and load characteristics of the engine operation, the ECU performed different strategies of fuel injection. The fuel injection control system madę it possible to complete three injection stages in a single work cycle of the internal combustion engine (pilot injection, pre-injection and the main injection). The maximum fuel pressure in the common rail amounted to 160 MPa. The engine was fuelled by commercial diesel oil.
Źródło:: Journal of KONES; 2010, 17, 3; 17-24
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Bench testing and simulation model of a cogeneration system with a stirling engine
Autorzy:: Chmielewski, A.
Gumiński, R.
Lubikowski, K.
Radkowski, S.
Szulim, P.
Powiązania:: https://bibliotekanauki.pl/articles/242327.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: Stirling engine
Alpha
Simulink
Sankey diagram
helium and nitrogen
cogeneration
Opis:: Cogeneration systems using a Stirling engine [2] are currently being developed and promoted by the European Union [1]. On the other hand, the EU climatic package obligates Polish energy producers to buy 100% CO2 emission rights from 2020 onwards. At that time, according to the experts a ton of CO2 could reach the price of 63.5 Euro. Attention is drawn to the fact that it is only then that nuclear power plants will become profitable, in the same way as wind power plants. This could result in substantial growth of energy prices, both for the economy and for households [3]. The paper presents the experimental research of a cogeneration system with a one-way Alpha type Stirling engine. The impact of the upper heat source and the type of working gas (helium and nitrogen) on the load capacity of the cogeneration system was studied. Based on a Sankey diagram, the power spread of the cogeneration system was analysed. On the basis of experimental research, a model was created of a cogeneration system consisting of the following submodels: Stirling engine of the second order, belt transmission, electric motor and an electrochemical battery. The Stirling engine was installed in a testbed, in the mechatronic lab at the Faculty of Automotive and Construction Machinery Engineering (SIMR) of Warsaw University of Technology. Furthermore, the impact of regenerator efficiency on the efficiency of the Stirling Engine was examined, which in turns impacts the efficiency of the entire cogeneration system.
Źródło:: Journal of KONES; 2013, 20, 3; 97-104
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Increasing the accuracy of the mean indicated pressure determination by appointment of the TDC cylinder position
Autorzy:: Pawletko, R.
Powiązania:: https://bibliotekanauki.pl/articles/243489.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: Top Dead Centre determination
Mean Indicated Pressure accuracy
indicator diagram analysis
Opis:: The paper describes the problems of mean indicated pressure determination and the piston TDC (Top Dead Centre) position impact on this parameter in marine diesel engines. Mean indicated pressure Pi is one of the most important diagnostic parameters of marine engines. On the basis of its parameter, the assessment of the technical condition of each cylinder as well as the regulation of injection equipment can be made. Most of the available electronic indicators enable automatic calculation of mean indicated pressure on the basis of progress indicator diagram. As the research shows the greatest impact on the accuracy of the designation mean indicated pressure has errors of piston TDC position. These errors can be significant and therefore this may lead to engine misdiagnosis. The actual piston TDC correction methods were discussed, and they justified the need of their use in marine engines, despite the wide use of methods of determining the angular position of the crankshaft. The original method of TDC correction based on the model of curve of the compression with the exponent of a polynomial was introduced. The proposed method of TDC correction has been verified for a different types of marine engines.
Źródło:: Journal of KONES; 2014, 21, 2; 251-258
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Increasing the accuracy of the mean indicated pressure determination by appointment of the TDC cylinder position
Autorzy:: Pawletko, R.
Powiązania:: https://bibliotekanauki.pl/articles/245110.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: Top Dead Centre determination
Mean Indicated Pressure accuracy
indicator diagram analysis
Opis:: The paper describes the problems of mean indicated pressure determination and the piston TDC (Top Dead Centre) position impact on this parameter in marine diesel engines. Mean indicated pressure Pi is one of the most important diagnostic parameters of marine engines. On the basis of his parameter, the assessment of the technical condition of each cylinder as well as the regulation of injection equipment can be made. Most of the available electronic indicators enable automatic calculation of mean indicated pressure on the basis of progress indicator diagram. As the research shows the greatest impact on the accuracy of the designation mean indicated pressure has errors of piston TDC position. These errors can be significant and therefore this may lead to engine misdiagnosis. The actual TDC piston correction methods were discussed, and were justified the need of their use in marine engines, despite the wide use of methods of determining the angular position of the crankshaft. The original method of TDC correction based on the model of curve of the compression with the exponent of a polynomial was introduced. The proposed method of TDC correction has been verified for different types of marine engines.
Źródło:: Journal of KONES; 2014, 21, 4; 397-404
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: The problematics of determining the characteristics of heat release, based on experimental indicator diagram for diagnostic purposes
Autorzy:: Witkowski, K.
Powiązania:: https://bibliotekanauki.pl/articles/246500.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
indicated parameters
indicator diagram
heat release characteristics
adiabatic exponent
Opis:: The article discusses the problem of determining the characteristics of heat release based on experimental indicator diagram for diagnostic purposes. The importance of the operational diagnosis of marine engines is the analysis of indicator diagrams was identified. In addition to analysing changes in the values of indicated, should be aimed to oriented broader analysis, including the determination on the basis of experimental indicator diagram of heat release characteristics during the combustion process. Then it is essential to choose the right model of heat release for reciprocating piston engines with direct fuel injection. In the diagnostics of piston engines, including marine engines, special interest arouses use single-zone model based on indicator diagrams as a source of information. Based on the results their own research we analysed the impact on the characteristics of heat release of simplifying assumptions in the model of heat release, including constant value adiabatic exponent. In the temperature, range 300÷2800 K waveformsκ are considered to be linearly dependent on the temperature. Based on the above, for the gas temperature from 800 K to 1850 K value of the exponent κ decreases about 3%. The effect of the value κ on the course of characteristics q and Q, to the typical marine engines was shown.
Źródło:: Journal of KONES; 2016, 23, 1; 429-436
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: The possibility of fuel injection pump diagnosis on the basis of indicator diagram
Autorzy:: Pawletko, R.
Powiązania:: https://bibliotekanauki.pl/articles/246551.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
heat release characteristics
marine diesel engine diagnosis
fuel pump leakage
Opis:: The paper presents the results research related to the possibility of fuel injection pump diagnosis on the basis of indicator diagram. The study was conducted on a laboratory four-stroke marine engine, type Sulzer 3Al 25/30, with nominal power Nen = 408 kW at nominal rotational speed n = 750 rpm. The study was carried out according to active experiment plan, during which the engine failure of the injection system was simulated. Simulation of fuel pump leakage was completed by the opening of the adjusting screw on the pump discharge. Measurements were made at a constant engine speed of 750 rev/min for five loads: 50, 100, 150, 200, 250 kW. Measurements of pressure of combustion were performed by means of tensometric sensors of Spice Company. Based on measured pressure curves heat release characteristics were determined. The algorithm allows the determination of net heat release rate q and the net generated heat Q characteristics. Based on the obtained results it can be concluded that significant improvement in the diagnostic use of indicator diagrams can be obtained by using heat release characteristics. These characteristics are correlated with the process of fuel injection and the injection pump operation. As demonstrated in the work of analyzing the heat release rate q, it is possible to infer diagnosis on the technical condition of the fuel injection system.
Źródło:: Journal of KONES; 2014, 21, 1; 215-221
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: The issue of the indicator diagram analysis for the purpose of diagnosis of marine diesel engines
Autorzy:: Witkowski, K.
Powiązania:: https://bibliotekanauki.pl/articles/246999.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
indicated parameters
indicator diagram
error TDC
heat release characteristics
Opis:: The article analyses the possibility of using the electronic type indicators, in the diagnosis of marine engines. The analysis of indicated parameters read from the indicator diagram is now widely use on ships in the diagnosis of marine engines. To make this possible, measuring indicated systems should meet a number of important requirements to be met to ensure the possibility of their diagnostic use. These include reliable determination of the top dead centre piston (TDC). The above is particularly important in in-depth analysis of indicator diagrams − calculating the heat release characteristics. The paper presents results of research on the effect of the error on the accuracy of the location of TDC (GMP) on calculated heat release characteristics. In order to demonstrate the impact positional error TDC, simulation study was conducted in which indicated diagrams was used, obtained on a medium-speed four-stroke marine engine type A25/30 and the low-speed two-stroke engine type RTA76, Sulzer Company.
Źródło:: Journal of KONES; 2015, 22, 2; 293-298
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Analysis of glued functions approximating real indicator diagram of engine running on different fuels
Ocena funkcji sklejanych aproksymujących rzeczywisty wykres indykatorowy silnika o zapłonie samoczynnym, zasilanego różnymi paliwami
Autorzy:: Ambrozik, A.
Ambrozik, T.
Łagowski, P.
Powiązania:: https://bibliotekanauki.pl/articles/248127.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
diagnostyka
silniki spalinowe
wykres indykatorowy
aproksymacja
diagnostics
combustion engines
indicator diagram
approximation
Opis:: The paper presents methodology for the approximation of real indicator diagrams, averaged over 50 runs, with the use of glued functions, which analytically describe the form of those diagrams. Coefficients of approximating functions can apply to the diagnostics and control of the combustion process in piston combustion engine. The paper aims to provide an analysis and comparative assessment of the influence of different fuels fuelled AD3.152 UR engine operation conditions (external speed characteristics and load characteristics) on the values of the above-mentioned coefficients of glued functions. The approximation of indicator diagrams accounts for the smoothing of the indicator diagram in the period between inlet valve closure and outlet valve opening, i.e. when the engine working cycle is done in the closed thermodynamic system. Experimental investigations and analysis of results were carried out for the engine operating in the mode of external speed characteristics for ne<1000-2000 rpm> and in the mode of load characteristics at the crankshaft rotational velocity corresponding to the maximum torque of the engine.
W artykule przedstawiono metodykę aproksymacji uśrednionych według 50-ciu realizacji rzeczywistych wykresów indykatorowych za pomocą funkcji sklejanych, analitycznie opisujących postać tych wykresów. Współczynniki funkcji aproksymujących mogą by wykorzystane do diagnostyki i sterowania przebiegiem procesu spalania w tłokowym silniku spalinowym. Celem artykułu jest analiza i ocena porównawcza wpływu warunków pracy silnika AD3.152 UR (zewnętrzna charakterystyka prędkościowa i charakterystyka obciążeniowa), zasilanego różnymi paliwami na wartości w/w współczynników funkcji sklejanych. Zastosowana aproksymacja wykresów indykatorowych zapewnia wygładzenie wykresu indykatorowego w okresie od zamknięcia zaworu dolotowego do otwarcia zaworu wylotowego tzn. w okresie realizacji cyklu pracy silnika w zamkniętym układzie termodynamicznym. Badania eksperymentalne i analizę otrzymanych wyników przeprowadzono dla pracy silnika według zewnętrznej charakterystyki prędkościowej dla ne less than 1000-2000 obr/min i charakterystyki obciążeniowej sporządzonej przy prędkości obrotowej wału korbowego, odpowiadającej maksymalnemu momentowi obrotowemu silnika.
Źródło:: Journal of KONES; 2008, 15, 3; 9-18
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Possibility of obtaining diagnostic information about the ships engine fuel injection system condition based on the analysis of characteristics of heat release
Autorzy:: Witkowski, Kazimierz
Powiązania:: https://bibliotekanauki.pl/articles/248068.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
indicated parameters
indicator diagram
heat release characteristics
injection system
diagnostic
Opis:: Marine engines are very complex technical objects, having many important functional systems, which include, inter alia, injection system, characterized by high unreliability. In this system, there may be different types of defects (damage) that affect the engine parameters, including specific fuel consumption, as well as failures endanger the safety of the ship. The indicator diagrams and analysis of indicated parameters have limited utility in the diagnosis of damages of marine engine, although this is a method commonly used in operational practice. To achieve greater diagnostic effectiveness, when, based on indicator diagrams, are calculated and then the characteristics of heat release is analysed - net of heat release characteristics and the intensity of the heat release, it was demonstrated. This procedure is particularly effective in the diagnosis of damages of marine diesel engine injection system components. It has been shown that the characteristics of heat release contain information about the condition of the injection systems, which enable to diagnose their failures. This is shown on the example of a clogged nozzle holes (their carbonizations). The obtained results allowed selecting the diagnosis symptoms, useful in detecting these faults in the injection system, from the characteristics of heat release: net heat release (Q) and intensity of heat release (q). The object of the research was typical marine medium speed engine Sulzer A25/30.
Źródło:: Journal of KONES; 2019, 26, 3; 249-256
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Operation valuation of volumetric compressors by means of dimensional analysis
Autorzy:: Rosłanowski, J.
Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/244479.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: operation of volumetric compressor
algebraic diagram
dimensional analysis physical dimension quantity
Joul multiplied second
Opis:: The following article introduces determination method of displacement compressors basing on its work parameters, by means of dimensional analysis. Operation of displacement compressors as volumetric compressing devices, according to J. Girtler, has been treated as a new physical quantity of [J·s] dimension. Such operation can be interpreted as mechanical energy transfer, through working organ, to gas factor volume in working space of the compressor in a definite time. Operation of volumetric compressor in which energy transfer, takes place, can be an information carrier of its technical condition. It expresses transformation of energy delivered to the gas, being forced through, by the compressor. This quantity can be determined, on the basis of, algebraic diagram of dimensional analysis, constructed by S. Drobot. The above diagram allowed us to control correctness of inference rules, in relation to mathematics, used in numerical functions of volumetric compressors operation, fitted in installations. Constructional solutions of compressors depend on the kind of compressed factor, the way of cooling, size of compressor and on the kind of propulsion and destination of compressor.
Źródło:: Journal of KONES; 2014, 21, 1; 233-240
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "diagram" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język