Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "nitrides" wg kryterium: Temat


Wyświetlanie 1-4 z 4
Tytuł:
Anticorrosion Properties and Morphology of Phosphate Coating Formed on Nitrided Surface of 42CrMo4 Steel
Autorzy:
Kapuścińska, A.
Kwiatkowski, L.
Wach, P.
Mazurek, A.
Diduszko, R.
Powiązania:
https://bibliotekanauki.pl/articles/356565.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
corrosion resistance
phosphating
gas nitriding
γ' nitrides
ε nitrides
Opis:
The subject of the study concerns the enhancement of corrosion and wear resistance of nitrided 42CrMo4 steel by the formation of zinc phosphate top layer. The present work is aimed at the assessment of the effect of increasing thickness of nitrided layer from approximately 2 μm to 16 μm on the morphology and properties of zinc phosphate coating. XRD analysis showed that along with the increase in the thickness of the nitrides layer, a change in the phase composition was observed. SEM/EDS examination revealed that top layer consists of crystalline zinc phosphate coating. The shape and size of crystals does not significantly depend on a thickness of nitrides layer but corrosion resistance determined by potentiodynamic method in 0.5M NaCl increased with an increase of thickness of a “white layer”. Similarily the wear resistance determined by the 3-cone-roll test was also the highest for 16 μm nitride layer.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 471-477
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of oxide precipitates chemical composition during steel deoxidization
Modelowanie składu chemicznego wydzieleń tlenkowych podczas odtleniania stali
Autorzy:
Iwanciw, J.
Podorska, D.
Wypartowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/352631.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
symulacja
odtlenianie stali
stal
tytan
aluminium
simulation
deoxidization
steel
titanium
nitrides
Opis:
The work analyses the possibilities of modeling the process of steel deoxidization from the view-point of thermodynamic equilibrium between liquid steel and oxide precipitates. Two calculation procedures were employed, which make use of WYK_STAL authors' program and commercial software FactSage. Two kinds of steel were taken into account, one with considerable titanium addition and the second without titanium. The variation of chemical composition of non-metallic precipitates with titanium concentration, aluminum addition and temperature was determined. The apparent influence of assumed thermodynamic model on the composition of non-metallic precipitate was stated.
Praca analizuje możliwości modelowania procesu odtleniania stali w aspekcie równowagi termodynamicznej między ciekłą stalą a wydzieleniami tlenkowymi. Zastosowano dwie procedury obliczeniowe z wykorzystaniem komercyjnego pakietu FACTSage oraz własnego programu WYK STAL. Obliczenia wykonano dla dwóch gatunków stali, z których jedna posiada znaczny dodatek tytanu. Obliczono, jak zmienia sie skład wydzielen tlenkowych pod wpływem stezenia tytanu, dodatku glinu oraz temperatury. Stwierdzono wyraźny wpływ przyjetego modelu termodynamicznego procesu na uzyskany skład fazy niemetalicznej.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 4; 999-999
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of oxygen and nitrogen removal from steel by means of titanium and aluminum
Symulacja usuwania tlenu i azotu ze stali przy użyciu tytanu i glinu
Autorzy:
Iwanciw, J.
Podorska, D.
Wypartowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/351475.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rafinacja stali
symulacja komputerowa
aluminium
tytan
azotki
tlenki
steel refining
computer simulation
titanium
nitrides
oxides
Opis:
Authors' computer program was employed in the simulation of the course of steel refining by means of simultaneously used aluminium and titanium. The mass and chemical composition of liquid steel and non-metallic precipitates, were calculated at constant or variable temperature. The influence of assumed nitrides form on the results of simulation was determined. Nitrides may be considered either as separate phases or as the components of non-metallic solution. The stoichiometry of titanium oxide obtained also influences the results of simulation. Parallel analysis of steel refining was carried out with the use of FactSage program. As a result of calculations the subsequent states of equilibrium between steel and non-metallic phase were determined. It was found that aluminium and titanium nitrides may exist only as the components of oxide-nitride solution, not as separate phases.
Przy pomocy własnego programu komputerowego dokonano symulacji przebiegu rafinacji stali przy pomocy glinu i tytanu, wyznaczając masę i skład chemiczny ciekłej stali i wydzieleń niemetalicznych dla ustalonej lub zmiennej temperatury. Rozpatrzono konsekwencje występowania dwóch możliwych form istnienia azotków glinu i tytanu: jako odrębnych faz i jako składników ciekłego roztworu. Również stechiometria tlenku tytanu uzyskanego w wyniku odtleniania wpływa na wynik obliczeń. Równoległą analizę tego samego przypadku przeprowadzono przy pomocy programu FactSage, wyznaczając kolejne stany równowagi między ciekłą stalą a fazą niemetaliczną. Stwierdzono, że azotki glinu i tytanu mogą występować tylko jako składniki roztworu tlenkowo-azotkowego., nie zaś jako odrębna faza.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 3; 635-644
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural analysis of sinter with titanium addition
Analiza strukturalna spieku z dodatkiem tytanu
Autorzy:
Fröhlichová, M.
Findorák, R.
Legemza, J.
Powiązania:
https://bibliotekanauki.pl/articles/350854.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
piec hutniczy
węglik tytanu
azotki tytanu
skład fazowy
mikrostruktura
blast furnace
titanium carbide
titanium nitrides
phase composition
microstructure
life of refractory lining
Opis:
Paper presents the results from the study of the effect of materials with titanium addition on the strength properties of the iron ore sinter. The sinters with TiO2 addition or without TiO2 addition prepared in laboratory were applied in this research and were compared based on the structural and phase composition. Exploited was the method of the X-ray diffraction and method of elemental EDX analysis applying the electron raster microscope with the energo-dispersion analyser. Confirmed was the relationship between the sinter structure and its strength. Higher strength of the sinter without TiO2 addition is the result of the different phase composition of the compared sinters. In the sinter production considered should be not only the chemical composition of the entry components of the charge and the chemical composition of the final product but also its structural and phase composition.
W artykule tym przedstawiono wyniki badań wpływu materiałów z dodatkiem tytanu na właściwości wytrzymałościowe spieku z rudy żelaza. Spieki zawierające dodatek TiO2, jak i bez dodatku TiO2 przygotowane w laboratorium poddano porównaniu w oparciu o ich strukturę i skład fazowy. W badaniach zastosowano metodę dyfrakcji rentgenowskiej oraz metody analizy elementarnej EDX, badania te przeprowadzono na mikroskopie elektronowym przy zastosowaniu analizatora dyspersji energii. W wyniku pomiarów potwierdzono związek pomiędzy strukturą martwicy i jej wytrzymałość. Wyższa wytrzymałość spieku bez dodatku TiO2 jest rezultatem różnicy składu fazowego porównywanych spieków. Podczas wytwarzania spieku powinno brać się pod uwagę nie tylko składu chemicznego składników wejściowych i składu chemicznego produktu końcowego, lecz także jego strukturalne i skład fazowy.
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 1; 179-185
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies