Temat: material technology - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Development of a New Tool Material for High Pressure Die Casting
Autorzy:: Herman, A.
Zikmund, P.
Tatíček, F.
Powiązania:: https://bibliotekanauki.pl/articles/382710.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
metallography
die material
HPDC technology
wear resistant alloy
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
metalografia
odlewanie ciśnieniowe
stop odporny na ścieranie
Opis:: The paper describes existing requirements for tool materials. In the light of experience with these supplied materials, we have demonstrated their considerable influence on the life of molds for die casting technology. From this research came the evaluation methodology of these tool materials which has been used for directing the development of a new material. Based on the new regulation of the chemical composition a sample was casted and forged after that. Then was determined the process of heat treatment and from a block of this material a mold insert was produced. This insert is now being tested in production.
Źródło:: Archives of Foundry Engineering; 2015, 15, 2; 23-28
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Cast construction elements for heat treatment furnaces
Autorzy:: Piekarski, B.
Drotlew, A.
Powiązania:: https://bibliotekanauki.pl/articles/382333.pdf
Data publikacji:: 2011
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
heat treatment plant
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
zakład obróbki cieplnej
Opis:: The study presents sketches and photos of the cast creep-resistant components used in various types of heat treatment furnaces. The shape of the elements results from the type of the operation carried out in the furnace, while dimensions are adjusted to the size of the furnace working chamber. The castings are mainly made from the high-alloyed, austenitic chromium-nickel or nickel-chromium steel, selecting the grade in accordance with the furnace operating conditions described by the rated temperature, the type and parameters of the applied operating atmosphere, and the charge weight. Typical examples in this family of construction elements are: crucibles, roller tracks, radiant tubes and guides. The majority of castings are produced in sand moulds.
Źródło:: Archives of Foundry Engineering; 2011, 11, 3 spec.; 163-170
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Badania właściwości mieszanek woskowych stosowanych w technologii wytapianych modeli – nowe metody badań
Investigations of properties of wax mixtures used in the investment casting technology – new investigation methods
Autorzy:: Zych, J.
Kolczyk, J.
Snopkiewicz, T.
Powiązania:: https://bibliotekanauki.pl/articles/382464.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: technologia wytapianych modeli
skurcz liniowy
wytrzymałość materiałów
sprężystość materiałów
investment casting technology
linear shrinkage
material strength
material elasticity
Opis:: W pracy przedstawiono wyniki badań wybranej grupy mieszanek woskowych stosowanych w technologii wytapianych modeli. Wykonano badania kinetyki skurczu mieszanek i przebiegu zmian właściwości lepko-sprężystych w funkcji temperatury. Wyznaczono wpływ temperatury na wytrzymałość na zginanie mieszanek woskowych.
The results of testing of the selected group of wax mixtures used in the investment casting technology, are presented in the paper. The measurements of the kinetics of the mixtures shrinkage and changes of viscous-plastic properties as a temperature function were performed. The temperature influence on bending strength of wax mixtures was determined.
Źródło:: Archives of Foundry Engineering; 2012, 12, 1s; 199-204
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Experimental Investigations on the Ejector Forces in the Die Casting Process
Autorzy:: Krischke, S.
Müller, S.
Schuchardt, T.
Kouki, Y.
Dilger, K.
Powiązania:: https://bibliotekanauki.pl/articles/382411.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
information technology
foundry industry
high pressure die casting
ejector force
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
technologia informatyczna
przemysł odlewniczy
odlewanie wysokociśnieniowe
Opis:: A measuring system was developed for the measurement of ejector forces in the die casting process. When selecting the sensor technology, particular care was taken to ensure that measurements can be taken with a high sampling rate so that the fast-running ejection process can be recorded. For this reason, the system uses piezoelectric force sensors which measure the forces directly at the individual ejector pins. In this way, depending on the number of sensors, it is possible to determine both the individual ejector forces and the total ejector force. The system is expandable and adaptable with regard to the number and position of the sensors and can also be applied to real HPDC components. Automatic triggering of the measurements is also possible. In addition to the measuring system, a device and a method for in-situ calibration of the sensors have also been developed. To test the measuring system, casting experiments were carried out with a real aluminium HPDC aluminium component. The experiments showed that it is possible to measure the ejector forces with sufficient sampling rate and also to observe the process steps of filling, intensification and die opening by means of ejector forces. Experimental setup serves as a basis for future investigations regarding the influencing parameters on the ejection process.
Źródło:: Archives of Foundry Engineering; 2018, 18, 4; 116-119
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Technologia wytapianych modeli w zastosowaniu dla stopów miedzi
Investment Casting Technology Applied to Copper Alloys
Autorzy:: Rzadkosz, S.
Kranc, M.
Garbacz-Klempka, A.
Kozana, J.
Piękoś, M.
Powiązania:: https://bibliotekanauki.pl/articles/381118.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjny materiał odlewniczy
innowacyjna technologia odlewnicza
metalografia
wada odlewu
technologia wytapianych modeli
stop miedzi
innovative foundry material
innovative foundry technology
metallography
casting defect
investment casting technology
copper alloy
Opis:: Technologia wytapianych modeli należy do najstarszych technologii odlewniczych. Historycznie służyła do odlewania narzędzi, broni i ozdób. Model wykonany z wosku pszczelego oblepiano gliną suszono i wypalano. Otrzymywano odlewy o dużej gładkości powierzchni, dokładności i precyzji wykonania ornamentu. Metodą tą odlewano niewielkie kilkugramowe odlewy jak i wielkogabarytowe pomniki. Współcześnie ta technologia jest wykorzystywana w wielu ważnych gałęziach produkcji zarówno artystycznej, jak i przemysłowej. Szczególnie w przemyśle zbrojeniowym, lotniczym, motoryzacyjnym, energetycznym, budowlanym, a nawet kosmicznym. W pracy przedstawiono wyniki badań i eksperymentów, prowadzonych w zakresie technologii odlewnictwa miedzi i stopów miedzi z zastosowaniem metody wytapianych modeli, zarówno w aspekcie historycznym, jak i współczesnej praktyki przemysłowej. Przykładowo przedstawiono analizę wybranych elementów dawnych technologii, form i odlewów wytworzonych w epoce brązu oraz wyniki badań dotyczące aktualnie produkowanych odlewów dla branży energetycznej. Jakość odlewów została oceniona na podstawie przeprowadzonych badań z zakresu mikrostruktury, składu chemicznego, przewodności elektrycznej i zawartości tlenu.
Investment casting technology belongs to the oldest casting techniques. Historically, it was used for casting tools, weapons and ornaments. A model, made from beeswax, was covered in loam, dried and fired. The casts obtained were characterised by high surface smoothness, accuracy and precision of its ornaments. This method was used for relatively small casts as well as for big monuments. Nowadays, this technology is used in many fields of manufacturing, both artistic and industrial, especially in ornaments, aviation, automotive, power, construction and even space industry. This work presents the results of research and experiments conducted in the field of casting technology of copper and copper alloys, applying the investment casting method, both in its historical aspect and modern industrial practice. An exemplary analysis was presented of the chosen elements of the old technologies, moulds and casts, as well as the results of casts made currently for the power industry. The casts quality was evaluated based on the research of their microstructure, chemical composition, electrical conductivity and oxygen content.
Źródło:: Archives of Foundry Engineering; 2013, 13, 3 spec.; 143-148
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: New Materials in the Production of Moulding and Core Sands
Autorzy:: Dobosz, S. M.
Major-Gabryś, K.
Grabarczyk, A.
Powiązania:: https://bibliotekanauki.pl/articles/383336.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: environment protection
innovative foundry technology
innovative foundry material
moulding sand
binder
biodegradable material
ochrona środowiska
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
masa formierskia
spoiwo
materiał biodegradowalny
Opis:: The article shows the influence of environment requirements on changes in different foundry moulding sands technologies such as cold box, self-hardening moulding sands and green sands. The aim of the article is to show the possibility of using the biodegradable materials as binders (or parts of binders’ compositions) for foundry moulding and core sands. The authors concentrated on the possibility of preparing new binders consisting of typical synthetic resins - commonly used in foundry practice - and biodegradable materials. According to own research it is presumed that using biodegradable materials as a part of new binders’ compositions may cause not only lower toxicity and better ability to reclaim, but may also accelerate the biodegradation rate of used binders. What’s more, using some kinds of biodegradable materials may improve flexibility of moulding sands with polymeric binder. The conducted research was introductory and took into account bending strength and thermal properties of furan moulding sands with biodegradable material (PCL). The research proved that new biodegradable additive did not decrease the tested properties.
Źródło:: Archives of Foundry Engineering; 2015, 15, 4; 25-28
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Shaping the Structure and Properties of High Quality Silumin Castings in Metal Molds Cooled with Water Mist
Autorzy:: Władysiak, R.
Powiązania:: https://bibliotekanauki.pl/articles/381548.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative material
casting technology
cooling
water mist
permanent mould casting
materiał innowacyjny
technologia odlewnicza
chłodzenie
mgła wodna
forma odlewnicza
Opis:: The paper presents some aspects of the theory and technology of high quality silumin castings in metal molds cooled pointed with water mist stream. The results of the work relate to improvement of the properties of silumin casts by affecting the cooling of the liquid silumin in gravity cast in metal mold and the possibility of controlling the solidification and crystallization of the casting. The high efficiency required from the cooling system is a consequence of an optimal selection of parameters of the generated mist and the maximum use of the phenomenon of water droplets evaporation on the surface of the cooled mold. The study showed that sequential spot cooling with use of water mist, characterized by a wide range of control means and a high maximum heat transfer efficiency, enables to control the flow of heat between the casting and the mold and it allows for a layered solidification leading to the realization of the entire cast solidification in the expected way: directional or simultaneous. Consequently, the results are: improvement of the quality of the castings as a result of the elimination of defects and significant reduction in shrinkage porosity in the casting, an increase of the homogeneity and fineness of the microstructure, about 25% increase in the mechanical properties.
Źródło:: Archives of Foundry Engineering; 2013, 13, 2 spec.; 98-105
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Effect of Metal Oxides Nanoparticles on the Selected Strength Properties of Moulding Sand with Water Glass
Autorzy:: Kmita, A.
Powiązania:: https://bibliotekanauki.pl/articles/381812.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative material
foundry technology
water glass
nanoparticles
tensile strength
materiał innowacyjny
technologia odlewnicza
szkło wodne
nanocząstka
wytrzymałość na rozciąganie
Opis:: The modification of water glass with nanoparticles of metal oxides in organic solvents was attempted in the study. The results of investigations of moulding sands with water glass modified by nanoparticles of the selected metal oxides in organic solvents, are presented in the hereby paper [21]. Nanoparticles of ZnO, Al₂O₃ or MgO in methanol, ethanol or propanol solutions were applied as modifiers of binding agents. Colloidal solutions of the modifiers were introduced into water glass in the amounts of 3, 5 or 7 mass %. Influences of the applied modifier and organic solvents as well as the modifier fraction in the binder on the selected strength properties of moulding sands were tested. On the bases of the analyses of the obtained results the probable mechanism of the water glass modification with nanoparticles of metal oxides was proposed.
Źródło:: Archives of Foundry Engineering; 2015, 15, 3 spec.; 33-38
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Influence of the Al₂O₃ Solid Phase on the Kinetics of Binding Ceramic Moulds
Autorzy:: Kolczyk, J.
Zych, J.
Jamrozowicz, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/380203.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
investment casting technology
ultrasonic test
ceramic mould
aqueous binder
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
technologia wytapianych modeli
pomiar ultradźwiękowy
forma ceramiczna
spoiwo wodniste
Opis:: The investigation results of the kinetics of binding ceramic moulds, in dependence on the solid phase content in the liquid ceramic slurries being 67, 68 and 69% - respectively, made on the basis of the aqueous binding agents Ludox AM and SK. The ultrasonic method was used for assessing the kinetics of strengthening of the multilayer ceramic mould. Due to this method, it is possible to determine the ceramic mould strength at individual stages of its production. Currently self-supporting moulds, which must have the relevant strength during pouring with liquid metal, are mainly produced. A few various factors influence this mould strength. One of them is the ceramic slurry viscosity, which influences a thickness of individual layers deposited on the wax model in the investment casting technology. Depositing of layers causes increasing the total mould thickness. Therefore, it is important to determine the drying time of each deposited layer in order to prevent the mould cracking due to insufficient drying of layers and thus the weakening of the multilayer mould structure.
Źródło:: Archives of Foundry Engineering; 2017, 17, 4; 91-96
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: The Compositions: Biodegradable Material – Synthetic Resins as Moulding Sands Binders
Autorzy:: Major-Gabryś, K.
Grabarczyk, A.
Dobosz, S. M.
Powiązania:: https://bibliotekanauki.pl/articles/383210.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: environment protection
innovative foundry technology
innovative foundry material
moulding sand
furfuryl resin
biodegradable material
ochrona środowiska
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
masa formierska
żywica furfurylowa
materiał biodegradowalny
Opis:: Growing emission requirements are forcing the foundry industry to seek new, more environmentally friendly solutions. One of the solutions may be the technologies of preparing moulding and core sands using organic biodegradable materials as binders. However, not only environmental requirements grow but also those related to the technological properties of moulding sand. Advancing automation and mechanization of the foundry industry brings new challenges related to the moulding sands. Low elasticity may cause defects during assembly of cores or moulds by the manipulators. The paper presents the study of flexibility in the room temperature according to new method and resistance to thermal deformation of self-hardening moulding sands with furfuryl resin, containing biodegradable material PCL. The task of the new additive is to reduce the moulding sands harmfulness to the environment and increase its flexibility in the room temperature. The impact of the additive and the effect of the amount of binder on the properties of mentioned moulding sands were analysed. Studies have shown that the use of 5% of PCL does not change the nature of the thermal deformation curve, improves the bending strength of tested moulding mixtures and increases their flexibility at room temperature.
Źródło:: Archives of Foundry Engineering; 2016, 16, 4; 75-78
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: An Application for Infrared Camera in Analyzing of the Solidification Process of Al-Si Alloy
Autorzy:: Władysiak, R.
Kozuń, A.
Powiązania:: https://bibliotekanauki.pl/articles/381103.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
thermography
TDA method
silumin
microstructure
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
termografia
metoda ATD
mikrostruktura
Opis:: The paper presents the results of the crystallization process of silumin by the TDA thermographic method and the results of the cast microstructure obtained in the sampler TDA-10, that was cooling down in ambient air. The study was conducted for silumin AlSi11 unmodified. The work demonstrated that the use of thermal imaging camera allows for the measurement and recording the solidification process of silumin. Thermal curve was registered with the infrared camera and derivative curve that was calculated on the base of thermal curve have both a very similar shape to adequate them TDA curves obtained from measurements using a thermocouple. Test results by TDA thermographic method enable quantitative analysis of the kinetics of the cooling and solidification process of neareutectic silumin.
Źródło:: Archives of Foundry Engineering; 2015, 15, 3; 81-84
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: The Flexibility of Pusher Furnace Grate
Autorzy:: Słowik, J. A.
Drotlew, A.
Piekarski, B.
Powiązania:: https://bibliotekanauki.pl/articles/383197.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
heat treatment plant
pusher furnace
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
obróbka cieplna
piec przepychowy
Opis:: The lifetime of guide grates in pusher furnaces for heat treatment could be increased by raising the flexibility of their structure through, for example, the replacement of straight ribs, parallel to the direction of grate movement, with more flexible segments. The deformability of grates with flexible segments arranged in two orientations, i.e. crosswise (perpendicular to the direction of compression) and lengthwise (parallel to the direction of compression), was examined. The compression process was simulated using SolidWorks Simulation program. Relevant regression equations were also derived describing the dependence of force inducing the grate deformation by 0.25 mm ‒ modulus of grate elasticity ‒ on the number of flexible segments in established orientations. These calculations were made in Statistica and Scilab programs. It has been demonstrated that, with the same number of segments, the crosswise orientation of flexible segments increases the grate structure flexibility in a more efficient way than the lengthwise orientation. It has also been proved that a crucial effect on the grate flexibility has only the quantity and orientation of segments (crosswise / lengthwise), while the exact position of segments changes the grate flexibility by less than 1%.
Źródło:: Archives of Foundry Engineering; 2016, 16, 4; 137-140
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Selected Technological Properties of Liquid Ceramic Slurries Used to Produce Moulds in the Replicast cs Technology
Autorzy:: Kaczorowski, R.
Just, P.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/380254.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: Innovative casting material
innovative casting technology
precision casting
thin walled ceramic mould
apparent viscosity
replicast CS technology
innowacyjny materiał odlewniczy
innowacyjna technologia odlewnicza
odlewanie precyzyjne
forma ceramiczna cienkościenna
lepkość pozorna
technologia Replicast CS
Opis:: The study discusses the issues connected with the production of thin-walled ceramic slurry in the replicast cs technology. In the ceramic mould production process, a special role is played by the liquid ceramic slurry used to produce the first layer of the mould. The study examines selected technological properties of liquid ceramic slurries used to produce moulds in the replicas cs technology. The ceramic slurries for the tests were prepared based on the binders Ludox Px30 and Sizol 030, enriched with Refracourse flour. The wettability of the pattern's surface by the liquid ceramic slurry and the dependence of the apparent viscosity on the ceramic flour content in the mixture were determined. The wettability of the pattern surface by the liquid ceramic slurry was determined based on the measurement of the wetting angle. The angle was determined by means of an analysis of the computer image obtained with the use of a CDC camera.
Źródło:: Archives of Foundry Engineering; 2017, 17, 4; 190-194
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Effect of Microwave Heating on Moulding Sand Properties with Gypsum Binder
Autorzy:: Paduchowicz, P.
Stachowicz, M.
Granat, K.
Powiązania:: https://bibliotekanauki.pl/articles/382976.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: foundry industry
foundry materials
foundry technology
microwave heating
gypsum
binding material
przemysł odlewniczy
materiały odlewnicze
technologia odlewnicza
ogrzewanie mikrofalowe
gips
materiał wiążący
Opis:: The paper presents results of initial research on the possibility of applying microwave radiation in an innovative process of making casting moulds from silica sand, where gypsum CaSO4∙2H2O was acting as a binding material. In the research were compared strengths and technological properties of moulding mixture subjected to: natural bonding process at ambient temperature or natural curing with additional microwave drying or heating with the use of microwaves immediately after samples were formed. Used in the research moulding sands, in which dry constituents i.e. sand matrix and gypsum were mixed in the ratio: 89/11. On the basis of the results of strength tests which were obtained by various curing methods, beneficial effect of using microwaves at 2.45 GHz for drying up was observed after 1, 2 and 5 hours since moisture sandmix was formed. Applying the microwaves for hardening just after forming the samples guarantees satisfactory results in the obtained mechanical parameters. In addition, it has been noted that, from a technological and economic point of view, drying the silica sand with gypsum binder in microwave field can be an alternative to traditional molding sand technologies.
Źródło:: Archives of Foundry Engineering; 2017, 17, 3; 97-102
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Badania nad odnawialnością polimerowych spoiw odlewniczych
Studies on the renewability of polymeric binders for foundry
Autorzy:: Grabowska, B.
Kaczmarska, K.
Bobrowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/383131.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjny materiał odlewniczy
innowacyjna technologia odlewnicza
masa formierska
spoiwo polimerowe
sieciowanie spoiwa
innovative foundry material
innovative foundry technology
moulding sand
polymer binder
Opis:: W niniejszej pracy przedstawiono wycinek badań nowych polimerowych spoiw odlewniczych na przykładzie spoiwa BioCo2 z uwzględnieniem problemu jego odnawialności. Omówiono wyniki badań strukturalnych (FT-IR) dla spoiwa BioCo2 przed i po usieciowaniu oraz badań wytrzymałości na zginanie [...] utwardzonej masy formierskiej świeżej, jak i odnowionej wiązanej spoiwem BioCo2. Sieciowanie spoiwa, jak też utwardzanie masy przeprowadzono na drodze fizycznej (promieniowanie mikrofalowe, temperatura). Na podstawie otrzymanych wyników badań wykazano, że istnieje możliwość przywrócenia pierwotnych właściwości wiążących spoiwa BioCo2. Po usieciowaniu spoiwa, jak też po jego utwardzeniu w masie formierskiej właściwości pierwotne można uzyskać poprzez uzupełnienie składu masy o odpowiednią wyznaczoną stechiometrycznie ilość wody. Stwierdzono, że po procesie odnowienia spoiwo BioCo2 nie traci swojej mocy wiązania.
In this paper the results of studies of polymeric binders on the example of the new BioCo2 binder, including the problem of its renewability, are presented. The results of structural studies (FT-IR) for the BioCo2 binder before and after crosslinking, and bending strength tests […] fresh and renewed cured molding sands with BioCo2 binder are discussed. The cross-linking binder and curring of moulding sand was carried out by physical agents (microwave radiation, temperature). On the basis of obtained results was shown that it is possible to restore the initial properties of the adhesive of BioCo2 binder. The initial properties of moulding sand can be achieved, after the cross-linking binders and after curing in the moulding sands with bioCo2 binder , by supplementing the moulding sand composition by the appropriate amount of water.
Źródło:: Archives of Foundry Engineering; 2012, 12, 1s; 47-52
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "material technology" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język