Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Chen, Hu" wg kryterium: Autor


Tytuł:
Modeling and Identification Method of Bolt Loosening of Joint Surface under Axial Tension of Multistage Disk-Drum Rotor
Autorzy:
Yue, Cong
Zheng, Xiangmin
Wang, Chaoge
Liu, Hao
Chen, Hu
Powiązania:
https://bibliotekanauki.pl/articles/24200822.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
multistage drum rotor
bolt loosening
equivalent joint stiffness
structural health monitoring
Opis:
Individual bolt at key connection positions is prone to loose when the engine is cycle-operating under complex loads. A joint surface equivalent stiffness model is derived and developed based on the connection characteristics of bolt screwing in the multi-exciting environment of the high-pressure rotor. The model is used to analyse the effect of bolt missing at circumferential positions with the equivalent stiffness loss. Vibration experiments under both axial force and lateral impact were carried out to obtain the dynamic response feature of the multistage disk-drum simulated rotor with missing one bolt at different positions. The Spearman correlation coefficient was applied to evaluate the identification effect of different measuring points on the bolt loosening position. The study shows that the eigenfrequencies of experimental results have a consistent trend with the equivalent stiffness variation caused by single bolt missing model. This method also provides a theoretical basis for the detection of bolt deviation position with multi-exciting vibration detection.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 2; art. no. 165779
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coated NPK Fertilizer Based on Citric Acid-Crosslinked Chitosan/Alginate Encapsulant
Autorzy:
Mesias, Vince St. D.
Agu, Anne Bernadette S.
Benablo, Precious Japheth L.
Chen, Chun-Hu
Penaloza Jr., David P.
Powiązania:
https://bibliotekanauki.pl/articles/124714.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
controlled release
crosslinking
encapsulation
NPK fertilizer
Opis:
A coated nitrogen-phosphorus-potassium (NPK) fertilizer was prepared via crosslinking chitosan and alginate using citric acid. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), particle size analysis, and zeta potential measurement showed the successful crosslinking, appropriate size, and colloidal stability of the coated NPK fertilizer. The encapsulation capability of the crosslinked chitosan/alginate (Chi/Alg) was studied using fluorescence spectroscopy and NPK analysis. The release behavior studies under various pH conditions showed that Chi/Alg NPK conformed to the standards of controlled release fertilizer with a maximum release rate of 40% for 30 days. The investigation of the release mechanism using Korsemeyer-Peppas mathematical model showed that the release of nutrients is governed by both coating material relaxation and diffusion process.
Źródło:
Journal of Ecological Engineering; 2019, 20, 11; 1-12
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fault risk assessment of underwater vehicle steering system based on virtual prototyping and Monte Carlo simulation
Autorzy:
He, D.
Hu, N.
Hu, L.
Chen, L.
Guo, Y.
Chen, S.
Powiązania:
https://bibliotekanauki.pl/articles/260342.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
fault risk assessment
underwater vehicle
virtual prototyping
Monte Carlo simulation
steering system
fault simulation
Opis:
Assessing the risks of steering system faults in underwater vehicles is a human-machine-environment (HME) systematic safety field that studies faults in the steering system itself, the driver’s human reliability (HR) and various environmental conditions. This paper proposed a fault risk assessment method for an underwater vehicle steering system based on virtual prototyping and Monte Carlo simulation. A virtual steering system prototype was established and validated to rectify a lack of historic fault data. Fault injection and simulation were conducted to acquire fault simulation data. A Monte Carlo simulation was adopted that integrated randomness due to the human operator and environment. Randomness and uncertainty of the human, machine and environment were integrated in the method to obtain a probabilistic risk indicator. To verify the proposed method, a case of stuck rudder fault (SRF) risk assessment was studied. This method may provide a novel solution for fault risk assessment of a vehicle or other general HME system.
Źródło:
Polish Maritime Research; 2016, 3; 97-105
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of water flows on ship traffic in narrow water channels based on cellular automata
Autorzy:
Hu, H.
Chen, X.
Sun, Z.
Powiązania:
https://bibliotekanauki.pl/articles/260068.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
narrow channel
cellular automata
simulation
ship interaction
Opis:
In narrow water channels, ship traffic may be affected by water flows and ship interactions. Studying their effects can help maritime authorities to establish appropriate management strategies. In this study, a two-lane cellular automation model is proposed. Further, the behavior of ship traffic is analyzed by setting different water flow velocities and considering ship interactions. Numerical experiment results show that the ship traffic density-flux relation is significantly different from the results obtained by classical models. Furthermore, due to ship interactions, the ship lane-change rate is influenced by the water flow to a certain degree.
Źródło:
Polish Maritime Research; 2017, S 3; 130-135
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bifurcation and control for a discrete-time prey–predator model with Holling-IV functional response
Autorzy:
Chen, Q.
Teng, Z.
Hu, Z.
Powiązania:
https://bibliotekanauki.pl/articles/907649.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
discrete prey predator model
flip bifurcation
Hopf bifurcation
saddle node bifurcation
OGY chaotic control
bifurkacja Hopfa
sterowanie chaosem
Opis:
The dynamics of a discrete-time predator–prey model with Holling-IV functional response are investigated. It is shown that the model undergoes a flip bifurcation, a Hopf bifurcation and a saddle-node bifurcation by using the center manifold theorem and bifurcation theory. Numerical simulations not only exhibit our results with the theoretical analysis, but also show the complex dynamical behaviors, such as the period-3, 6, 9, 12, 20, 63, 70, 112 orbits, a cascade of period-doubling bifurcations in period-2, 4, 8, 16, quasi-periodic orbits, an attracting invariant circle, an inverse period-doubling bifurcation from the period-32 orbit leading to chaos and a boundary crisis, a sudden onset of chaos and a sudden disappearance of the chaotic dynamics, attracting chaotic sets and non-attracting sets. We also observe that when the prey is in chaotic dynamics the predator can tend to extinction or to a stable equilibrium. Specifically, we stabilize the chaotic orbits at an unstable fixed point by using OGY chaotic control.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2013, 23, 2; 247-261
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Motion characteristics after ricochet: an experimental investigation
Autorzy:
Chen, Guoming
Hu, Junhua
Liu, An
Feng, Jinfu
Hu, Qingqing
Powiązania:
https://bibliotekanauki.pl/articles/260197.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
air-water trans-media vehicle (AWTMV)
ricochet
nose
initial conditions
responses
Opis:
The ricochet behaviour of the air–water trans-media vehicle (AWTMV) during water-entry crossing was experimentally investigated. Three types of small-scale AWTMV including cone, ogive, and flat nose were used in the test. The underwater trajectory, velocity, and inclination angle of projectiles during the ricochet process were obtained using a high-speed camera. The angle change of the AWTMV and the ratio of the residual velocity are introduced. Based on this result, the relationship between the ricochet responses and initial conditions was derived. The results of this study show that (1) a small incident angle and great velocity make the occurrence of ricochet behaviour easier, (2) the stability of the trajectory of projectiles with cone, ogive, and flat nose weakened in turn at the same initial conditions, (3) the angle change and the ratio of the residual velocity are linear functions of the incident angle and velocity.
Źródło:
Polish Maritime Research; 2020, 2; 4-10
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tight focusing of radially polarized beams by a devil’s vortex lens
Autorzy:
Chen, Z.
Hu, X.
Chen, X.
Wang, X.
Pu, J.
Powiązania:
https://bibliotekanauki.pl/articles/173576.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
devil’s vortex lens
radially polarized beam
tight focusing
high numerical aperture
Opis:
Tight focusing of radially polarized beams with a devil’s vortex lens is numerically investigated. Multiple focal spots can be generated in the geometric focus when a radially polarized beam is focused by a high numerical aperture objective in the presence of a devil’s vortex lens. The position of the major focal spot shifts from the geometric focus when a devil’s vortex lens with S = 1 is employed, and the position of the focal spot can be controlled by the numerical aperture of the objective. The intensity components of the major focal spot are influenced by the vortex phase of the devil’s vortex lens. A strong longitudinal component near the optical axis is produced by a devil’s vortex lens without vortex phase, and a nearly pure transversal field is produced by a devil’s vortex lens with vortex phase.
Źródło:
Optica Applicata; 2018, 48, 3; 389-398
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pleistocene Equid Brain Endocast from Shanxi Province, China
Autorzy:
Hu, Y.
Chen, Y.
Wang, S.
Sun, Q.
Powiązania:
https://bibliotekanauki.pl/articles/946031.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
mammalia
equus
equid brain
pleistocene
shanxi province
china
Opis:
Brain endocasts are rare in the fossil record because they are only preserved under exceptional conditions. An equid brain endocast from the early Pleistocene of Wanrong County, Shanxi Province, China, is reported in this paper. Measuring approximately 140 × 95.2 × 83 mm, the new specimen represents a relatively advanced adult horse brain. Comparisons indicate that it is more derived than those of Hyracotherium and Mesohippus in having an expanded neocortex, and more than those of Pliohippus and Hipparion in having an enlarged network of branching sulci; in most characters involving these sulci, the Shanxi brain conforms to the extant species Equus caballus. The sulcus diagonalis of the Equus brain appears to have evolved conservatively during the early Pleistocene, whereas the sulcus suprasylvius seems to have evolved rapidly. The specimen demonstrates that the development of a high degree of complexity predates the enlargement of the brain in the horse, which increased in length, breadth, and especially height during the late Cenozoic.
Źródło:
Acta Palaeontologica Polonica; 2014, 59, 2; 253-258
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uniaxial compression test and numerical simulation of rock-like specimen with T-Shaped cracks
Autorzy:
Liangxiao, Xiong
Chen, Haijun
Xu, Zhongyuan
Hu, Deye
Powiązania:
https://bibliotekanauki.pl/articles/27312090.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
skała sztuczna
pęknięcie
kształt T
próba
badanie ściskania jednoosiowego
symulacja numeryczna
artificial rock
T-shaped crack
uniaxial compression test
numerical simulation
Opis:
In this study, the uniaxial compression test and PFC2D numerical simulation were carried out on the artificial rock specimen with T-shaped prefabricated fractures. The effects of the lengths l1, l2 of the main fractures, the length l3 of the secondary fracture, and the angle β between the secondary fracture and the loading direction on the uniaxial compressive strength and crack evolution law of specimen were studied. The research results show that the change of l1, l2 and β has obvious effect on the compressive strength and crack growth of the specimen, but the change of l3 has little effect on the compressive strength of the specimen. When l3 = 40 mm and l1 ≠ l2, the angle β influences on the crack propagation and failure mode of the specimen.
Źródło:
Archives of Civil Engineering; 2023, 69, 2; 227--244
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System Design for Evenness Measurement of Raw Silk
Projekt systemu do pomiaru równomierności surowego jedwabiu
Autorzy:
Pan, Q.
Chen, M.
Hu, Y.
Zuo, B.
Powiązania:
https://bibliotekanauki.pl/articles/232659.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
image vision
raw silk evenness
diameter extraction
variation coefficient
CV
system verification
analiza obrazu
jedwab surowy
równomierność jedwabiu
współczynnik zmienności
systemy kontroli
Opis:
The evenness of raw silk is one of its most valuable qualities. Seriplane inspection is a common test for raw silk evenness but is prone to human error and lacks accurate repeatability; the Uster evenness tester is another common approach but is costly and vulnerable to environmental factors. An image-based raw silk evenness detection system is proposed in this paper. The system is comprised of an image acquisition segment with a CCD image sensor, telecentric lens, light source, over feeding device, and raw silk winding device, plus an image processing segment tasked with threshold segmentation and morphology operations. Images of the raw silk are first captured with the image acquisition segment, then the images are processed by threshold segmentation and morphology processing; the diameters obtained in this segment are then used to calculate the variation coefficient (CV), which characterises the evenness of the raw silk. We conducted three experiments to test the stability, repeatability, and accuracy of the system. The results showed that the system proposed is stable, repeatable, and accurate.
Równomierność surowego jedwabiu jest jedną z jego najcenniejszych zalet. Dotychczas powszechnie stosowane systemy kontroli równomierności jedwabiu są podatne na błąd człowieka i nie mają dokładnej powtarzalności, są kosztowne i wrażliwe na czynniki środowiskowe. W artykule zaproponowano system oceny równomierności jedwabiu oparty na analizie obrazu. Zaproponowany system składa się z segmentu akwizycji obrazu z przetwornikiem obrazu CCD, soczewką telecentryczną, źródłem światła, urządzeniem nadawczym i urządzeniem do nawijania surowego jedwabiu oraz segmentu przetwarzania obrazu, którego zadaniem jest progowa segmentacja i operacje morfologiczne. Obrazy surowego jedwabiu są najpierw przechwytywane przez segment pozyskiwania obrazu, następnie obrazy są przetwarzane przez segmentację progową i przetwarzanie morfologiczne; średnice uzyskane w tym segmencie są następnie wykorzystywane do obliczenia współczynnika zmienności (CV), który charakteryzuje równomierność surowego jedwabiu. Analiza otrzymanych wyników pokazała, że zaproponowany system jest stabilny, powtarzalny i dokładny.
Źródło:
Fibres & Textiles in Eastern Europe; 2018, 1 (127); 21-24
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iterative estimators of parameters in linear models with partially variant coefficients
Autorzy:
Hu, S.
Meinke, K.
Chen, R.
Huajiang, O.
Powiązania:
https://bibliotekanauki.pl/articles/929607.pdf
Data publikacji:
2007
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
model liniowy
estymacja parametrów
algorytm iteracyjny
współczynnik zmienności
linear model
parameter estimation
iterative algorithms
variant coefficients
Opis:
A new kind of linear model with partially variant coefficients is proposed and a series of iterative algorithms are introduced and verified. The new generalized linear model includes the ordinary linear regression model as a special case. The iterative algorithms efficiently overcome some difficulties in computation with multidimensional inputs and incessantly appending parameters. An important application is described at the end of this article, which shows that this new model is reasonable and applicable in practical fields.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2007, 17, 2; 179-187
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of the fixed carbon and ash in blast furnace dust on its co-reduction with seaside titanomagnetite
Autorzy:
Wang, Xiaoping
Hu, Tianyang
Chen, Chuanzhong
Sun, Tichang
Powiązania:
https://bibliotekanauki.pl/articles/109936.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
seaside titanomagnetite
blast furnace dust
co-reduction roasting
fixed carbon
ash
Opis:
Previous research has found that the fixed carbon in blast furnace dust (BFD) could be used as the reductant of co-reduction roasting of the iron oxides in seaside titanomagnetite and BFD to replace coals. This research studied the influence mechanism of the fixed carbon and ash in BFD on coreduction.Results showed that both fixed carbon and ash in BFD promoted the reduction of iron, while ash had adverse effect on separation of titanium and iron. The main mechanism was as follows: The ash in BFD accelerated melting. In addition, the iron oxide in the ash of BFD could be reduced to metallic iron cores more easily in the initial stage, providing the site of inhomogeneous core and promoting the aggregation and growth of metallic iron. Furthermore, the fixed carbon mainly reacted with iron ore by solid-solid reaction, leading to a rapid reduction rate and a high utilization rate of fixed carbon.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 5; 1323-1337
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Social Impacts on the Maritime Education – a Case Study of National Kaohsiung Marine University in Taiwan
Autorzy:
Hu, Jia-Shen
Chang, S. W.
Chen, T. S.
Powiązania:
https://bibliotekanauki.pl/articles/116312.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Maritime Education and Tr
Maritime Education
human resources
Shipping Industry
educational reform
STCW-95
Quality Assurance
Opis:
Recent developments in Taiwan toward the technology intensive country, the employment of cost effective foreign labors by shipping companies, the widespread of universities and the internationalization of shipping industries propose considerable threats on the quality assurance of maritime education. A resultant crisis for lacking on-board seafarers with managerial levels has urged the consolidation of governmental, private and educational organizations in the attempts to further improve the quality of maritime education and to promote the on-board career incentives. The process from the formulation of problems to the implementation of strategies undertaken by the National Kaohsiung Marine University (NKMU) is reviewed. A chain reaction initiated from the degradation of students’ entry performances due to the widespread of universities has formed a viscous cycle leading to the outsourcing of foreign human resources by shipping industry. Strategies in the aspects of course reform, joint ventures of lectureship with shipping industry, pre-courses for students’ extended career plans and the establishment of educational center that consolidates the departments of navigation, marine engineering and fishery in NKMU are illustrated.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2008, 2, 2; 197-203
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Stitch Structure on the Reading Performance of Fabric-Based Embroidered UHF RFID Tags
Wpływ struktury ściegu na wydajność odczytu haftowanych etykiet RFID UHF
Autorzy:
Xudong, Yang
Yingxue, Chen
Tingting, Wang
Yong, Zhang
Jiyong, Hu
Powiązania:
https://bibliotekanauki.pl/articles/1419756.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
embroidery
stitch structure
RFID
Radio Frequency Identification
conductive yarn
antenna
haft
struktura ściegu
identyfikacja radiowa
przędza przewodząca
antena
Opis:
As the demand for low-cost rapid preparation techniques for RFID (Radio Frequency Identification) fabric tags is increasing, embroidery technologists have attempted to fabricate tag antennas. However, the effects of stitch structures on the performance of tag antennas have rarely been studied. Since the structure of an embroidered stitch is related to the embroidering process parameters and embroidery thread, this study chose a common stitch trace type to prepare two sets of UHF RFID tag antennae by changing the embroidery thread structure and stitch length, and then the electrical and gain properties of these antennas were analyzed. And again, the reading performance of the corresponding tag was evaluated. The results showed that the antennas embroidered with copper/PET wrapped yarns have higher energy transfer efficiency than those with single copper wire yarns. When the stitch length increases from 0.9 to 5 mm, the read range of the embroidered tag firstly increases and then decreases, due to the large embroidering process deviation of the tag antenna geometry, and the optimal stitch length for the read range is 1.7 mm, where the read range is 12.95 m. When the stitch length is 5 mm, the read range is minimum – 9.56 m. In summary, this study determined the embroidered thread structure and the process design of the stitch length in terms of the performance of a fabric-based embroidery antenna for an RFID tag as well as the read range.
Wraz ze wzrostem zapotrzebowania na niedrogie techniki szybkiego przygotowania etykiet materiałowych RFID (identyfikacja radiowa), technolodzy haftu podjęli próbę wyprodukowania specjalnych etykiet. Dotychczas rzadko badano wpływ struktur ściegowych na działanie etykiet antenowych. Ponieważ struktura haftowanego ściegu jest powiązana z parametrami procesu i nicią zastosowaną do haftu, w badaniu przeanalizowano ścieg typowy. Przygotowano dwa zestawy antenowych etykiet RFID UHF różniących się strukturą nici do haftu i długością ściegu, a następnie przeanalizowano właściwości wzmocnienia tych anten. Wyniki pokazały, że anteny haftowane przędzą owiniętą miedzią/PET mają wyższą efektywność przenoszenia energii, niż anteny z pojedynczą przędzą z drutu miedzianego. Gdy długość ściegu wzrośnie z 0,9 do 5 mm, zasięg odczytu haftowanej przywieszki najpierw rośnie, a następnie maleje, ze względu na duże odchylenie procesu haftowania geometrii anteny przywieszki, a optymalna długość ściegu dla zakresu odczytu wynosi 1,7 mm, gdzie zasięg odczytu wynosi 12,95 m. Gdy długość ściegu wynosi 5 mm, zasięg odczytu wynosi minimum – 9,56 m. Podsumowując, w badaniu określono strukturę haftowanej nici i projekt długości ściegu pod kątem wydajności anteny, a także zasięgu odczytu.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 2 (146); 48-53
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Probability mapping of petroleum occurrence with a multivariate-Bayesian approach for risk reduction in exploration, Nanpu Sag of Bohay Bay Basin, China
Autorzy:
Hu, Suyun
Guo, Qiulin
Chen, Zhuoheng
Mi, Shiyun
Xie, Hongbin
Powiązania:
https://bibliotekanauki.pl/articles/94428.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
oil exploration
risk visualization
well planning
Nanpu Sag
probability map
poszukiwanie ropy naftowej
wizualizacja ryzyka
mapa prawdopodobieństwa
Opis:
A multivariate-Bayesian approach has been applied to the Nanpu Sag of the Bohai Bay Basin, eastern China, to evaluate probability of oil occurrence. The geological data from 343 exploratory wells and seismic interpretations that were available at the end of 2004 were used for the purpose. Seventeen wells were drilled after the evaluation in 2005, sixteen of which reached their target horizon. Eight of the nine wells drilled in areas with a predicted high probability of hydrocarbon occurrence (>50%) encountered commercial oil, indeed; post-drilling analysis indicated that seven of these eight wells yielded high flow rates from thick net pay, and that one of these wells yielded a low flow rate. Seven wells were drilled in areas with a predicted relatively low probability (<50%) of oil occurrence; three of them were dry and four recovered oil with relatively low flow rates. Comparison of the post-drilling results with the pre-drilling prediction suggests that the multivariate-Bayesian approach can help visualize geological risk, thus improving exploration success by optimizing the drilling strategy.
Źródło:
Geologos; 2009, 15, 2; 91-102
1426-8981
2080-6574
Pojawia się w:
Geologos
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies