Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Šebek, M." wg kryterium: Autor


Tytuł:
Effect of Laser Scribing on Soft Magnetic Properties of Conventional Grain-Oriented Silicon Steel
Autorzy:
Petryshynets, I.
Puchý, V.
Kováč, F.
Šebek, M.
Powiązania:
https://bibliotekanauki.pl/articles/1032233.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.-y
79.20.Eb
68.55.jm
77.80.Dj
75.50.Vv
Opis:
The present work investigates the influence of laser scribing of grain-oriented silicon steel on the improvement of its soft magnetic properties via magnetic domains modification. The experimental material was represented by conventional Fe-3%Si grain-oriented electrical steel that was taken directly from industrial line after the final box annealing. The laser scribing treatments were applied onto the material surface in order to induce thermal stresses having crucial influence on the magnetic domains refinement. The laser scribing conditions have been optimized by introducing thermal stresses onto the experimental material surface leading to optimal refinement of final domains structures and desired magnetic softness minimization. A semiquantitative relationship has been found between the domain patterns and the used fiber laser treating method. The obtained modified domain structure led to a significant decrease in coercivity measured in DC magnetic field from 20 A/m to 12 A/m.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 777-779
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure Evolution and Mechanical Properties of C-Mn Cold Rolled Dual Phase Steel after Continuous Annealing Process in Laboratory Conditions
Zmiany mikrostruktury i właściwości mechaniczne walcowanej na zimno, dwufazowej stali C-Mn po procesie ciągłego wyżarzania w warunkach laboratoryjnych
Autorzy:
Šebek, M.
Horňak, P.
Zimovčák, P.
Longauer, S.
Powiązania:
https://bibliotekanauki.pl/articles/356411.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dual phase steel
microstructure
annealing simulation
TEM observation
nanoindentation method
stal dwufazowa
mikrostruktura
ciągłe wyżarzanie
metoda TEM
nanoindentacja
Opis:
The article deals with the influence of annealing parameters on evolution of microstructure and mechanical properties of dual phase steel. Dual phase steel was annealed in laboratory conditions according to the three chosen cycles of annealing: into intercritical region (780°C), into austenite region (920°C) and into austenite region (920°C) by subsequently cooling into intercritical region (780°C) with the hold at the temperature of 495°C. Simulation of annealing regimes by thermo-mechanical simulator Gleeble was done. The obtained microstructure consists from three phases: ferritic matrix, martensite and martensite/ bainite grains. For the microstructure identification the TEM and nanoindentation experiments were performed.
Praca dotyczy wpływu parametrów wyżarzania na zmiany mikrostruktury i właściwości mechaniczne stali dwufazowej C-Mn. Stal dwufazową poddano wyżarzaniu w warunkach laboratoryjnych według trzech wybranych cykli: w zakresie między krytycznym (780°C). w obszarze austenitu (920°C) i w obszarze austenitu (920°C) ze schładzaniem do zakresu międzykrytycznego (780°C) przy temperaturze wytrzymania 495°C. Przeprowadzono symulację schematów wyżarzania przy użyciu symulatora obróbki cieplno-plastycznej Gleeble. Uzyskana mikrostruktura składa się z trzech faz: osnowy terrytycznej. martenzytu oraz ziaren martenzytu/bainitu. W celu identyfikacji mikrostruktury wykonano badania metodą TEM oraz nanoindentacji.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 2; 821-824
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetic Losses Evolution of Ferritic Fe-Si Steel Subjected to Temper Rolling at Elevated Temperature
Autorzy:
Petryshynets, I.
Kováč, F.
Falat, L.
Puchý, V.
Šebek, M.
Powiązania:
https://bibliotekanauki.pl/articles/1030935.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.-y
75.50.Vv
81.40.Ef
61.72.Cc
Opis:
The effects of heat transport phenomena and deformation gradient through the sheet cross-section on the microstructure, texture and magnetic properties of non-oriented Fe-Si steel were investigated. In order to achieve desired conditions for the steel microstructural and textural parameters improvement, a temper rolling process at elevated temperature was examined in combination with subsequent short term annealing, employing fast heating rate in laboratory conditions. The experimental material was represented by conventional medium silicon, vacuum degassed non-oriented steel that was taken directly from industrial line after final annealing. Performed electron back scattered diffraction measurements revealed that the experimental steel, treated by our proposed thermomechanical treatment, was characterized by coarse-grained microstructure with enhanced intensity of rotating cube texture. The magnetic losses of experimental samples were measured in ac magnetic field with 50 Hz frequency on the toroid with external and internal diameters of 25 mm and 15 mm, respectively. These measurements with magnetic field intensity of 2500 A/m showed that the application of our suggested treatment led to clear power losses reduction of the investigated material from initial 9.9 W/kg to 6.4 W/kg, i.e. by more than 35%.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 1065-1068
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Investigations of $Ni_{0.2}Zn_{0.8}Fe_2O_4$ Ferrite Nanofiber Membranes by Needleless Electrospinning Method
Autorzy:
Streckova, M.
Mudra, E.
Sebek, M.
Sopcak, T.
Dusza, J.
Kovac, J.
Powiązania:
https://bibliotekanauki.pl/articles/1398266.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.75.Cd
75.50.Gg
81.07.-b
75.47.Lx
Opis:
The preparation of $Ni_{0.2}Zn_{0.8}Fe_2O_4$ nanofiber membranes by simple and versatile needleless electrospinning technique is presented. The single phase of spinel ferrite membrane was obtained after conventional thermal treatment of polyvinyl alcohol (PVA)/metal nitrate precursors at 800°C for 4 h in air. The formation of single-phase fibers was characterized using differential scanning calorimetry accompanied with thermogravimetric analysis. The surface morphology, microstructure and crystal structure were investigated by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The magnetic properties of the fibrous samples measured in the temperature range from 2 to 300 K verify a soft magnetic behavior, which is quite typical for ferrimagnetic spinel-type ferrites.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 729-731
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Fiber Laser Pulse Processing on Coercivity and Nanohardness of Fe-3.2Si Grain-Oriented Electrical Steel in relation with its Surface Changes and Magnetic Domains Modifications
Autorzy:
Puchý, V.
Falat, L.
Kováč, F.
Petryshynets, I.
Džunda, R.
Šebek, M.
Powiązania:
https://bibliotekanauki.pl/articles/1032305.pdf
Data publikacji:
2017-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.80.Ba
81.05.Bx
81.40.Rs
81.40.-z
75.60.Ch
79.20.Eb
Opis:
Fiber laser scribing of Fe-3.2Si grain-oriented electrical steel was carried out using three different laser pulse regimes, namely a single pulse laser regime, multipulse laser regime and multipulse laser regime with modulation of laser pulses. The samples were tested for coercivity and nanohardness before and after laser processing. Clear improvements in soft magnetic characteristics were observed for all the regimes using the lowest single pulse energy of 0.6 mJ. The best improvement i.e. the most significant decrease in coercivity was obtained after the regime with 5 pulses. Further increasing in both pulse energy and pulse number resulted only in detrimental effects on both magnetic and mechanical characteristics. Introduction of 50 kHz pulse modulation within 100-pulse laser regimes resulted in lower coercivity values in comparison with the same regimes without modulation. The major effects responsible for the observed improvement are related to optimal refinement and rearrangement of magnetic domains determined by the balance of laser-induced residual stresses and plastic deformation at the surface of the treated material. Thus the fiber laser pulse processing has been recognised as a useful and energy efficient tool in obtaining electrical steels for power transformers with lower core losses.
Źródło:
Acta Physica Polonica A; 2017, 131, 6; 1445-1449
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effects of Laser Surface Hardening on Microstructural Characteristics and Wear Resistance of AISI H11 Hot Work Tool Steel
Autorzy:
Šebek, M.
Falat, L.
Kováč, F.
Petryshynets, I.
Horňak, P.
Girman, V.
Powiązania:
https://bibliotekanauki.pl/articles/352543.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hot work tool steel
laser hardening
microstructure
hardness
wear resistance
Opis:
The present study deals with the effects of laser surface treatment on microstructure evolution and wear resistance of AISI H11 hot work tool steel in quenched and tempered condition. The most upper laser-affected zone is characterized by re-melted microstructure consisting of dendrite cells with fresh non-tempered martensite, retained austenite and inter-dendritic carbidic network. The subsolidus microstructure just beneath the re-melted zone represents the most laser surface hardened zone consisting of fresh non-tempered martensite with fine and coarse carbides as a result of overheating the original QT substrate microstructure. The highest microhardness values in the range from 775 to 857 HV were measured for the LSH microstructure and the most softened microstructure exhibited the minimum hardness of 530 HV. The laser treated samples showed the improvement of their surface wear resistance by 35%.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1721-1726
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strong Electronic Correlations in a New Yb-Based Compound: $YbCu_4Ni$
Autorzy:
Čurlik, I.
Reiffers, M.
Giovannini, M.
Gažo, E.
Šebek, J.
Šantavá, E.
Powiązania:
https://bibliotekanauki.pl/articles/1534605.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.27.+a
75.30.-m
75.30.Mb
Opis:
Heat capacity measurements performed on the new ternary compound $YbCu_4Ni$ indicate for this compound strong electronic correlations with possible antiferromagnetic phase transition below 0.5 K. Susceptibility and magnetisation measurements above 2 K show no magnetic ordering.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 919-921
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Electronic Structure and Specific Heat of $YNi_4Si$
Autorzy:
Pugaczowa-Michalska, M.
Falkowski, M.
Kowalczyk, A.
Timko, M.
Reiffers, M.
Mihalik, M.
Šebek, J.
Šantava, E.
Powiązania:
https://bibliotekanauki.pl/articles/1813671.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.20.Be
71.20.-b
65.40.-b
Opis:
The studies of the electronic structure and the specific heat of $YNi_4Si$ are reported. Below the Fermi energy $(E_F)$ the density of states contains mainly the 3d states of Ni, which hybridized with 4d states of Y and 3p states of Si. The theoretical electronic specific heat coefficient (12.32 mJ/(mol $K^2$)) obtained for equilibrium lattice parameters and the experimental value (13 mJ/(mol $K^2$)) are in a reasonable agreement.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 323-326
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat Capacity and Susceptibility of $CeCu_4Al$
Autorzy:
Reiffers, M.
Gažo, E.
Timko, M.
Kowalczyk, A.
Toliński, T.
Andrzejewski, B.
Šebek, J.
Šantavá, E.
Powiązania:
https://bibliotekanauki.pl/articles/1813775.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.40.Cx
75.30.Mb
Opis:
The heat capacity in the applied magnetic field up to 9 T, susceptibility and magnetization of polycrystalline $CeCu_4Al$ are presented. The determined electronic heat capacity coefficient γ= 210 mJ $mol^{-1} K^{-2}$ confirmed heavy fermion character of this compound. Magnetic ordering was not observed down to 0.5 K. Magnetic properties confirm these observations.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 425-428
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low Temperature Properties of the $Ce_{1-x}La_{x}NiAl_4$
Autorzy:
Toliński, T.
Kowalczyk, A.
Reiffers, M.
Šebek, J.
Šantavá, E.
Curlik, I.
Ilkovič, S.
Powiązania:
https://bibliotekanauki.pl/articles/1534742.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.27.+a
65.40.Ba
75.30.Mb
Opis:
Measurements of the heat capacity in ultralow temperatures (down to 350 mK) have been carried out for $Ce_{1-x}La_{x}NiAl_4$. The paramagnetic behavior above about 30 K can be well described by the Curie-Weiss magnetic susceptibility. The undoped CeNiAl_4 compound is a known heavy fermion system with a large electronic specific heat coefficient (γ = 0.5 J $mol^{-1} K^{-2}$) and the Kondo temperature in the range 30-80 K. In the case of the $Ce_{0.8}La_{0.2}NiAl_4$ and $Ce_{0.6}La_{0.4}NiAl_4$ compounds a peak in C/T appears below 2 K, which is strongly damped by the magnetic field. It is probably connected with the Kondo and/or magnetic interactions and the electronic specific heat coefficient is 0.19 J $mol^{-1} K^{-2}$ (0.43 J $mol^{-1} K^{-2}$) for x = 0.2 (x = 0.4) at T → 0. The value determined above the peak, at temperature for which the magnetic field starts to decrease γ ( ≈ 3 K), is about 0.5 J $mol^{-1} K^{-2}$ and the effect of the magnetic field can be well analyzed in frames of the single-ion Kondo model.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 933-935
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Conductivity of a Layered $CsGd(MoO_4)_2$ Crystal
Autorzy:
Tibenská, K.
Tkáč, V.
Orendáčová, A.
Orendáč, M.
Feher, A.
Šebek, J.
Sechovský, V.
Powiązania:
https://bibliotekanauki.pl/articles/1534983.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.30.Et
75.40.Cx
66.70.Lm
75.30.Ds
Opis:
The thermal conductivity of $CsGd(MoO_4)_2$ has been studied in the temperature range from 2 to 50 K in zero magnetic field. The analysis of the data performed within the Debye model with the relaxation-time approximation revealed the presence of the scattering of phonons by critical fluctuations. The behaviour of phonon mean free path at the lowest temperatures is discussed.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 971-972
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ti-Induced Ferromagnetism and the Specific Heat of $CaTi_xRu_{1-x}O_3$ (x=0, 0.005, 0.03)
Autorzy:
Zorkovská, A.
Baran, A.
Kajňaková, M.
Feher, A.
Šebek, J.
Šantavá, E.
Bradarić, I.
Powiązania:
https://bibliotekanauki.pl/articles/1813685.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.70.Pq
75.40.Cx
72.80.Ga
Opis:
The influence of Ti substitution on the specific heat of the $CaTi_xRu_{1-x}O_3$ system at low concentrations x=0, 0.005, and 0.03 was studied in the temperature range of 2-300 K at magnetic fields up to 9 T. Small peak was revealed in the C/T vs. $T^2$ dependence at around 3 K, which are field sensitive (the electronic specific heat coefficient γlinearly decreases with the increase in magnetic field), and might be connected to some kind of magnetic ordering. The coefficient γis suppressed also by Ti substitution.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 355-358
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low Temperature Anomalies in the Specific Heat and Magnetic Susceptibility of $Na_{0.7}CoO_2$ Samples
Autorzy:
Baran, A.
Zorkovská, A.
Feher, A.
Šebek, J.
Šantavá, E.
Hejtmánek, J.
Veverka, M.
Bradarić, I.
Ružička, M.
Powiązania:
https://bibliotekanauki.pl/articles/1813849.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.40.Cx
72.80.Ga
Opis:
We present a comparative study of $Na_{0.7}CoO_2$ samples obtained from three different sources and prepared by different methods. The specific heat and magnetic susceptibility measurements in the temperature range 2-300 K show substantial influence on the observed anomalies, which underlines that the system is extremely sensitive to preparation protocols.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 495-498
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anomalous Transport Properties of Carbon-Doped $EuB_6$
Autorzy:
Batkova, M.
Batko, I.
Filipov, V.
Flachbart, K.
Sechovský, V.
Shitsevalova, N.
Šantavá, E.
Šebek, J.
Powiązania:
https://bibliotekanauki.pl/articles/1534309.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.30.Kz
72.15.Gd
75.47.Gk
Opis:
In the presented work we report electrical, magnetic and thermal properties of $EuB_{6-x}C_{x}$ single crystals with an estimated value of x ≈ 0.07. Our studies reveal an antiferromagnetic phase transition at $T_{N}$ ≈ 6.7 K. Electrical resistivity at zero magnetic field shows a pronounced resistivity maximum at $T_{M}$ ≈ 7 K, just above the antiferromagnetic phase transition temperature. With increasing applied magnetic field the maximum moves to lower temperature and becomes totally suppressed at the field of 9 T. Observed magnetoresistance is negative in the whole studied temperature range 2-20 K, yielding a ratio of ρ(0 T, 7 K)/ρ(9 T, 7 K) ≈ 2.5. The origin of such magnetoresistance is associated with formation of mixed magnetic structure in the system due to fluctuation of carbon concentration.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 893-894
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Scattering of Phonons in $CsMnCl_3 \cdot 2H_2O$
Autorzy:
Tkáč, V.
Tibenská, K.
Orendáčová, A.
Orendáč, M.
Šebek, J.
Sechovský, V.
Anders, A.
Feher, A.
Powiązania:
https://bibliotekanauki.pl/articles/1534857.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.30.Et
75.40.Cx
66.70.Lm
75.30.Ds
Opis:
The thermal conductivity of the quasi-one-dimensional S = 5/2 Heisenberg antiferromagnet $CsMnCl_3 \cdot 2H_2O$ with the intrachain interaction $J//k_{B}$ = 3 K was experimentally studied at temperatures from 2 to 25 K. The data analysis performed within the Debye model with the relaxation-time approximation unambiguously indicates the presence of the scattering of phonons on magnetic subsystem.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 950-952
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies