Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "magnet system" wg kryterium: Temat


Tytuł:
Establishing and characterizing a permanent magnet system for the prototype of NISs Kibble balance
Autorzy:
Emira, Sayed
Shaaban, E. R.
Rashad, M. M.
Gelany, Shaker A.
Powiązania:
https://bibliotekanauki.pl/articles/2203366.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Kibble balance
Planck constant
magnet system
magnetic field
Opis:
The Kibble balance experiment is used to redefine the kilogram as a unit of mass based on the Planck constant. To demonstrate and understand the basic principle of the Kibble balance, the National Institute of Standards (NIS)-Egypt has constructed a prototype Kibble balance that can measure gram-level masses with 0.01% relative uncertainty. Through the construction of this prototype, the challenges can be studied and addressed to overcome the weaknesses of NIS’s prototype. This study presents the design and construction of the prototype Kibble balance. It also focuses on the design and performance of the magnetic system, which is a crucial element of the Kibble balance. Analytical modeling and finite element analysis were used to evaluate and improve the magnet system. Several other aspects were also discussed, including the yoke’s material and enhancing the magnetic profile within the air gap of the magnet system. Over a vertical distance of 30 mm inside the air gap, the magnetic flux density was found to be 0.3 T, and the uniformity was found to be 8 x 10-5.
Źródło:
Metrology and Measurement Systems; 2023, 30, 1; 3--16
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of the Force Function Distribution in the Workplace of the Magnetic Disc Type Separator Intended for the Cleaning of Bulk Substances from the Ferromagnetic Impurities
Autorzy:
Shvedchykova, Iryna
Melkonova, Inna
Powiązania:
https://bibliotekanauki.pl/articles/411225.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
permanent magnet
force function
magnetic system
magnetic separator
Opis:
The paper deals with the magnetic system of the disk separator with permanent magnets. It is shown that the developed magnetic system can be used to purify finely dispersed friable substances from unwanted ferromagnetic inclusions. The main advantage of the magnetic system is the ability to self-clean the surface of a non-magnetic rotating discharging disk. The research of the distribution of the force function acting on multi-domain ferromagnetic particles in the working zone of the disk separator was carried out. To solve the main tasks of the study, a finite element method was implemented, realized in the COMSOL Multiphysics software environment. It is shown that when changing the air gap or the effective length of the poles, the distribution of the force function over the height of the working zone, as well as the magnitude of force, varies. The rational size of the air interpolar gap, which provides the maximum value of power force, was determined.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 3; 3-10
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the technical level of magnetic fishing tools
Autorzy:
Romanyshyn, Taras
Romanyshyn, Liubomyr
Bembenek, Michał
Mokhnii, Ihor
Powiązania:
https://bibliotekanauki.pl/articles/409609.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
fishing tool
lifting force
magnetic system
permanent magnet
technical level
Opis:
A variety of magnetic fishing tools poses the task of the optimal choice of tool for eliminating accidents during the construction, operation and repair of wells. Existing criteria for assessing the quality of fishing magnets are characterized by the complexity of the determination and the ambiguity of the results. Therefore, the aim of research is development of a new approach to determining the technical level of fishing tools of various types and designs. A complex criterion has been developed that allows to evaluate the technical level of magnetic systems by correlating the actual and theoretical values of the total and specific lifting forces. Also it has been carried out a qualimetric analysis of magnetic tools, which are currently offered by world manufacturers. As a result, mathematical models are found that describe the average and modern world level of devices with specific lifting force. Technical decisions are proposed, the implementation of which in the design of magnetic systems of fishing tools will allow to achieve high values of lifting force. Application of the proposed complex criterion along with the results of qualimetric analysis will make it possible to objectively assess the technical level of magnetic fishing tools both at the design stage and during serial production.
Źródło:
Management Systems in Production Engineering; 2020, 2 (28); 78-83
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stanowisko badawcze do testowania łączników wysokonapięciowych
Test stand for testing high – voltage switches
Autorzy:
Ziółko, M.
Powiązania:
https://bibliotekanauki.pl/articles/267351.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
akcelerator
łączniki wysokonapięciowe
magnes nadprzewodnikowy
system pomiarowy
accelerator
HV switches
superconducting magnet
measuring system
Opis:
Akcelerator ciężkich jonów SIS100 jest budowany na terenie ośrodka badań jądrowych GSI w Darmstadt (Niemcy) w ramach międzynarodowego projektu FAIR. Cząstki elementarne będą w nim rozpędzane do prędkości przekraczających 99% prędkości światła przy pomocy elektromagnesów nadprzewodnikowych, z których będzie zbudowany akcelerator. Przed umieszczeniem magnesów w akceleratorze są one poddawane szczegółowej kontroli w celu oceny ich przydatności do pracy w warunkach nadprzewodnictwa. W Politechnice Gdańskiej jest opracowywany system umożliwiający zautomatyzowaną kontrolę kluczowych parametrów elektrycznych elektromagnesów na etapie ich budowy a także eksploatacji. W celu spełnienia wysokich wymagań dotyczących parametrów oraz trwałości działania, system pomiarowy musi być zbudowany z restrykcyjnie dobranych elementów. W referacie przedstawiono opis stanowiska testującego najważniejsze elementy systemu wraz z przykładowymi wynikami badań.
The SIS100 Heavy Ion Accelerator is being built at the GSI nuclear research centre in Darmstadt (Germany) as part of the international FAIR project. The elementary particles will be accelerated to speeds exceeding 99% of the speed of light by means of superconducting electromagnets, from which the accelerator is built. Before magnets are placed in the accelerator, they are subjected to a detailed inspection in order to assess their suitability for operation in superconductivity conditions. At the Gdansk University of Technology, a system is being developed which allows for automated control of key electrical parameters of electromagnets at the stage of their construction and operation. In order to meet the high requirements concerning parameters and durability of operation, the measuring system must be built of carefully selected elements. High voltage switches are very important elements of this system. Selection of the right switches was an important problem due to the requirements concerning parameters and durability. The paper describes the constructed stand testing selected electrical parameters of the switches.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2018, 61; 79-82
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka obwodów elektrycznych magnesów nadprzewodzących
The diagnostics of superconducting magnets electrical circuits
Autorzy:
Wołoszyk, M.
Ziółko, M.
Swędrowski, L.
Powiązania:
https://bibliotekanauki.pl/articles/266574.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
magnes nadprzewodzący
system pomiarowo-diagnostyczny
rezystancja izolacji
superconducting magnet
measurement system
diagnostic system
insulation resistance
Opis:
W ramach międzynarodowego projektu FAIR, którego uczestnikiem jest również Polska, budowany jest obecnie w Darmstad (Niemcy) akcelerator kołowy. Będzie on służyć do rozpędzania ciężkich jonów do prędkości bliskich prędkości światła. Akcelerator ten będzie zbudowany z magnesów nadprzewodzących co pozwoli m.in. na minimalizację strat energii elektrycznej. Utrzymanie magnesów akceleratora w stanie nadprzewodnictwa wymaga kontroli kluczowych jego parametrów zarówno przed pierwszym uruchomieniem jak i w trakcie eksploatacji. Na Wydziale Elektrotechniki i Automatyki Politechniki Gdańskiej opracowywany jest obecnie system pomiarowo-diagnostyczny, który ma służyć do testowania stanu obwodów elektrycznych magnesów nadprzewodzących. W artykule przedstawiono wymagania stawiane przed systemem pomiarowym oraz koncepcję działania podsystemów do kontroli stanu izolacji oraz poprawności połączeń magnesów. Omówiono także wnioski wypływające z badań elementów systemu pomiarowego.
Poland is a member of international project FAIR. The purpose of this project is construction of a circular accelerator of heavy ions in Darmstadt (Germany). The main part of the accelerator are superconducting magnets. Maintaining superconducting magnets capable of superconductivity requires precise control of the parameters before the first run and during their operation. For this purpose, the research team at the Faculty of Electrical and Control Engineering of Gdansk University of Technology conducts research on specialized diagnostic and measurement system for testing electrical circuits of superconducting magnets in the project FAIR. This paper presents the requirements for diagnostic system and concept of hardware for subsystems testing the resistance insulation and cerrectness of electrical circuit of superconducting magnet. It also presents the conclusions from experimental research of essential system components.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2016, 50; 103-107
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of a permanent magnet motor with an inverter in a drive system of a car. Part 2
Autorzy:
Pawelski, Z.
Uszpolewicz, G.
Powiązania:
https://bibliotekanauki.pl/articles/245003.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
electrical machines
permanent magnet motor
inverter
electric drive control system
Opis:
The article presents a mathematical model of a permanent magnet motor, powered by a three-phase source of sinusoidal voltage, and a control method. Cooperation between numerical integration algorithms in the differential equation system of the motor and an inverter has been verified. The results of numerical simulations are presented in a graphic form. This article is an extension of the publication [12], in which a model of a drive system was proposed, consisting of: a battery, a supercapacitor and a method of controlling these energy sources during a driving cycle of a vehicle. For vector control, the mathematical model of a synchronous machine in the dq coordinate system is the most common one. The most important feature of this control method is the fact that the iq component of the rotor current vector determines the value of motor torque, and the component id – the value of magnetic flux. In the article, the emphasis is put on how inverters work. Their basic task is to generate such currents iabc or voltages uabc to obtain torque without ripples. It leads to development of different control concepts for achieving this goal, which are related to the modelling of magnetic fluxes in a stator and in an inverter.
Źródło:
Journal of KONES; 2018, 25, 4; 325-335
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic response improvement of hybrid system by implementing ANN-GA for fast variation of photovoltaic irradiation and FLC for wind turbine
Autorzy:
Izadbakhsh, M.
Rezvani, A.
Gandomkar, M.
Powiązania:
https://bibliotekanauki.pl/articles/141412.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hybrid system
photovoltaic
FLC
permanent magnet synchronous generator (PMSG)
ANN-GA
Opis:
In this paper, dynamic response improvement of the grid connected hybrid system comprising of the wind power generation system (WPGS) and the photovoltaic (PV) are investigated under some critical circumstances. In order to maximize the output of solar arrays, a maximum power point tracking (MPPT) technique is presented. In this paper, an intelligent control technique using the artificial neural network (ANN) and the genetic algorithm (GA) are proposed to control the MPPT for a PV system under varying irradiation and temperature conditions. The ANN-GA control method is compared with the perturb and observe (P&O), the incremental conductance (IC) and the fuzzy logic methods. In other words, the data is optimized by GA and then, these optimum values are used in ANN. The results are indicated the ANN-GA is better and more reliable method in comparison with the conventional algorithms. The allocation of a pitch angle strategy based on the fuzzy logic controller (FLC) and comparison with conventional PI controller in high rated wind speed areas are carried out. Moreover, the pitch angle based on FLC with the wind speed and active power as the inputs can have faster response that lead to smoother power curves, improving the dynamic performance of the wind turbine and prevent the mechanical fatigues of the generator.
Źródło:
Archives of Electrical Engineering; 2015, 64, 2; 291-314
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of the efficiency of the large-diameter fishing tools with the moving magnetic systems
Autorzy:
Romanyshyn, Taras
Sheketa, Vasyl
Romanyshyn, Liubomyr
Buchynskyi, Myroslav
Powiązania:
https://bibliotekanauki.pl/articles/2064377.pdf
Data publikacji:
2019
Wydawca:
STE GROUP
Tematy:
fishing tool
magnetic system
permanent magnet
hoisting capacity
narzędzie wyciągowe
system magnetyczny
magnes trwały
zdolność wyciągowa
Opis:
The variety of accidents which happen during the construction of oil and gas wells causes the expansion in the use of magnetic fishing tools. However, the known tools based on permanent magnets have a significant drawback involving the flat working surface of the magnetic system that does not permit to achieve a considerable attraction force to a fished object of complex geometric shape. Therefore, the aim of the research is to increase the efficiency of removal the objects of irregular geometric shape from the wells by enlarging the area of contacting them. For that purpose, it has been developed a fundamentally new design of the large-diameter fishing tool with the moving magnetic systems capable of copying the shape of the objects to be fished. Each magnetic system, which is compound of permanent rare-earth neodymium magnets and concentrically placed magnetic cores, shall be held by the magnetic field of adjacent systems with opposite polarity. There were conducted theoretical studies using the finite element method to determine the working capacity of the designed tool. As a result, it has been found the value of hoisting capacity during the interaction of magnetic systems with the roller cone of the drill bit; this fact confirms the capability of fishing the objects of irregular geometric shape. In addition, it has been explored the influence of the material of the fished object on the power characteristics of magnetic systems. The application of the designed magnetic tool allows removing the ferromagnetic objects from the well regardless of their shape, weight and position on the bottom hole. Apart from that, the given tool may be used in the areas where the technology of work is related to drilling wells.
Źródło:
New Trends in Production Engineering; 2019, 2, 1; 206--213
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Permanent magnet synchronous generators in a ship’s shaft generator systems
Autorzy:
Dariusz, Tarnapowicz
Powiązania:
https://bibliotekanauki.pl/articles/135287.pdf
Data publikacji:
2020
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
Marine Shaft Generator
Permanent Magnet Synchronous Generator
Active Rectifier
power system simulation
power generation economics
power system management
Opis:
Among the various methods for generating electricity on a ship, a shaft generator system is characterized by the highest energy and economic efficiency. The use of a Permanent Magnet Synchronous Generator (PMSG) in these systems, in comparison to classic synchronous generators, improves the ship’s propulsion efficiency and the system’s reliability. The problem of adjusting the PMSG’s excitation and changing the speed of the generator’s shaft can be solved by the use of modern power and electronic systems. This article presents a method for controlling the mechatronic system of a shaft generator with a PMSG, which enables stable operation to be achieved when changing the rotational speed of the shaft. Analytical and simulation studies were carried out and have enabled the boundaries of the area in which the PMSG can operate to be determined, while maintaining the required electrical power. The results have shown that the use of a PMSG instead of an EESG can increase the energy efficiency of the shaft generator system and increases the system’s reliability
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2020, 61 (133); 17-22
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electromagnetic launch systems for civil aircraft assisted take-off
Autorzy:
Bertola, L.
Cox, T.
Wheeler, P.
Garvey, S.
Morvan, H.
Powiązania:
https://bibliotekanauki.pl/articles/950674.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
linear permanent magnet synchronous motor
civil aircraft launch
electromagnetic launch system
linear induction motor
Opis:
This paper considers the feasibility of different technologies for an electromagnetic launcher to assist civil aircraft take-off. This method is investigated to reduce the power required from the engines during initial acceleration. Assisted launch has the potential of reducing the required runway length, reducing noise near airports and improving overall aircraft efficiency through reducing engine thrust requirements. The research compares two possible linear motor topologies which may be efficaciously used for this application. The comparison is made on results from both analytical and finite element analysis (FEA).
Źródło:
Archives of Electrical Engineering; 2015, 64, 4; 535-546
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies