Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "energy deposition" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Secondary electron interactions in materials with environmental and radiological interest
Autorzy:
García, G.
Blanco, F.
de Pablos, J.
Pérez, J.
Williart, A.
Powiązania:
https://bibliotekanauki.pl/articles/148529.pdf
Data publikacji:
2003
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
electron scattering
energy deposition
Opis:
Important environmental and radiological applications require energy deposition models including the interactions between the secondary electrons and the atoms or molecules of the medium. In this work we propose a method to obtain reliable cross-section data to be used in these models by combining total and ionisation cross-section measurements with simple calculations of the differential and integral elastic cross sections. The energy loss spectra obtained in this experiment have been also used to derive the stopping power of the considered materials for electrons. Some examples of results for atomic (Xe) and molecular (CF4) targets are presented and discussed in this paper.
Źródło:
Nukleonika; 2003, 48, 2; 103-107
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat Treatment Effect on Physical Properties of Stainless Steel / Inconel Bonded by Directed Energy Deposition
Autorzy:
Eom, Yeong Seong
Kim, Kyung Tae
Kim, Dong Won
Yu, Ji-Hun
Sim, Chul Yong
An, Seung Jun
Park, Yong-Ha
Son, Injoon
Powiązania:
https://bibliotekanauki.pl/articles/2049122.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
directed energy deposition
interface
physical properties
heat treatment
Opis:
In this study, stainless steel 316L and Inconel 625 alloy powders were additively manufactured by using directed energy deposition process. And heat treatment effect on hardness and microstructures of the bonded stainless steel 316L/Inconel 625 sample was investigated. The microstructures shows there are no secondary phases and big inclusions near interfacial region between stainless steel 316L and Inconel 625 except several small cracks. The results of TEM and Vickers Hardness show the interfacial area have a few tens of micrometers in thickness. Interestingly, as the heat treatment temperature increases, the cracks in the stainless steel region does not change in morphology while both hardness values of stainless steel 316L and Inconel 625 decrease. These results can be used for designing pipes and valves with surface treatment of Inconel material based on stainless steel 316L material using the directed energy deposition.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 1049-1054
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deposition Characteristics of High-Thermal-Conductivity Steel in the Direct Energy Deposition Process and its Hardness Properties at High Temperatures
Autorzy:
Son, Jong-Youn
Shin, Gwang-Yong
Lee, Ki-Yong
Yoon, Hi-Seak
Shim, Do-Sik
Powiązania:
https://bibliotekanauki.pl/articles/355767.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
direct energy deposition
HTCS-150
pore
lack of fusion
hardness
Opis:
Direct energy deposition (DED) is a three-dimensional (3D) deposition technique that uses metallic powder; it is a multi-bead, multi-layered deposition technique. This study investigates the dependence of the defects of the 3D deposition and the process parameters of the DED technique as well as deposition characteristics and the hardness properties of the deposited material. In this study, high-thermal-conductivity steel (HTCS-150) was deposited onto a JIS SKD61 substrate. In single bead deposition experiments, the height and width of the single bead became bigger with increasing the laser power. The powder feeding rate affected only the height, which increased as the powder feeding rate rose. The scanning speed inversely affected the height, unlike the powder feeding rate. The multi-layered deposition was characterized by pores, a lack of fusion, pores formed by evaporated gas, and pores formed by non-molten metal inside the deposited material. The porosity was quantitatively measured in cross-sectionsof the depositions, revealing that the lack of fusion tended to increase as the laser power decreased; however, the powder feeding rate and overlap width increased. The pores formed by evaporated gas and non-molten metal tended to increase with rising the laser power and powder feeding rate; however, the overlap width decreased. Finally, measurement of the hardness of the deposited material at 25°C, 300°C, and 600°C revealed that it had a higher hardness than the conventional annealed SKD61.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 4; 1365-1369
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Direct Energy Deposition of Mo Powder Prepared by Electrode Induction Melting Gas Atomization
Autorzy:
Roh, Goo-Won
Park, Eun-Soo
Moon, Jaeyun
Lee, Hojun
Byun, Jongmin
Powiązania:
https://bibliotekanauki.pl/articles/2049331.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
molybdenum powder
electrode induction melting gas atomization
direct energy deposition
porosity
hardness
Opis:
Molybdenum (Mo) is used to form a barrier layer for metal wiring in displays or semiconductor devices. Recently, researches have been continuously attempted to fabricate Mo sputtering targets through additive manufacturing. In this study, spherical Mo powders with an average particle size of about 37 um were manufactured by electrode induction melting gas atomization. Subsequently, Mo layer with a thickness of 0.25 mm was formed by direct energy deposition in which the scan speed was set as a variable. According to the change of the scan speed, pores or cracks were found in the Mo deposition layer. Mo layer deposited with scan speed of 600 mm/min has the hardness value of 324 Hv with a porosity of approximately 2%. We demonstrated that Mo layers with higher relative density and hardness can be formed with less effort through direct energy deposition compared to the conventional powder metallurgy.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 795-798
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Post-Heat Treatment on the Impact Toughness and Crack Propagation Mechanism of AISI D2 Tool Steel Manufactured by Direct Energy Deposition
Autorzy:
Park, Jun-Hyung
Kim, Kyu-Sik
Koo, Yong-Mo
Kim, Jin-Young
Kim, Min-Chul
Lee, Kee-Ahn
Powiązania:
https://bibliotekanauki.pl/articles/2203722.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AISI D2 tool steel
direct energy deposition
post-heat treatment
impact toughness
fractography
Opis:
This study investigated the effect of heat treatment on the microstructure and impact toughness property of AISI D2 manufactured with direct energy deposition (DED) and compared the results with conventional wrought material. The fracture crack propagation behavior was examined in connection with microstructures through fracture surface analysis. AISI D2 manufactured with DED had a eutectic structure that turned into a net-type carbide after heat treatment, and Cr-rich needle-type secondary carbide was observed. Impact toughness of DED AISI D2 measured 2.0 J/cm2 in the as-built sample and 1.1 J/cm2 in the heat-treated sample. Compared to a wrought heat-treated AISI D2, DED AISI D2 had relatively low impact toughness. DED AISI D2 and wrought material had different crack propagation mechanisms. In DED AISI D2, the eutectic structure and net-type carbide boundary were identified as the major microstructural factor decreasing impact toughness.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 119--122
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-objective optimization for weld track geometry in wire-arc directed energy deposition of ER308L stainless steel
Autorzy:
Nguyen, Van Canh
Le, Van Thao
Pham, Ngoc-Linh
Nguyen, Anh-Thang
Powiązania:
https://bibliotekanauki.pl/articles/24084674.pdf
Data publikacji:
2023
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
wire-arc directed energy deposition
weld track
ER308L stainless steel
multi-objective optimisation
Opis:
In this research, the weld track geometry in wire-arc DED (directed energy deposition) of ER308L stainless steel was predicted and optimized. The studied geometrical attributes of weld tracks include weld track width (WTW), weld track height (WTH), and contact angle (α). The experiment was designed based on Taguchi method with three variables (current I, voltage U, and weld velocity v) and four levels for each variable. The ANOVA was adopted to evaluate the accuracy of the models and impact levels of variables on the responses. The TOPSIS method was utilized to predict the optimal variables. The results indicated that the predicted models were built with high accuracy levels (R2 = 98.92%, 98.77%, and 98.91% for WTW, WTH, and α, respectively). Among the studied variables, U features the highest effects on WTW and α with 78.56% and 69.90% of contribution, respectively, while v is the variable that has the most impact on WTH with 39.82% of contribution. The optimal variables predicted by TOPSIS were U = 23 V, I = 140 A, and v = 300 mm/min, which allows building components with stable and regular geometry.
Źródło:
Journal of Machine Engineering; 2023, 23, 2; 123--134
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deposition of large organic particles (macrodetritus) in a sandy beach system (Puck Bay, Baltic Sea)
Autorzy:
Kotwicki, L.
Weslawski, J.M.
Raczynska, A.
Kupiec, A.
Powiązania:
https://bibliotekanauki.pl/articles/48248.pdf
Data publikacji:
2005
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
suspension
filtration
deposition
energy flow
algal mat
sandy beach
Baltic Sea
Puck Bay
organic carbon
macrodetritus
Opis:
The aim of this study was to evaluate the amount of organic macrodetritus deposited on the sandy shores of the southern Baltic,an d to determine the type of washout material and their chemical composition (carbon and nitrogen). Over 900 samples of macrodetritus (particles retained on a 0.5 mm sieve) were collected from seven sampling locations along a 120 km stretch of coastline in Poland at monthly intervals in 2002. Analysis of the C and N content of several categories of detritus supplied information about seasonal changes in and the ageing of algal debris,an d indicated that the amount of carrion is constant; the latter is apparently always metabolised very rapidly. The annual deposition of macroalgal detritus on this coast was estimated at 15 000 tonnes fresh weight,t hat is around 75% of the primary production of filamentous macroalgae in Puck Bay. In comparison with the amounts of kelp deposited on sandy beaches in South Africa (Griffiths & Stenton-Dozey 1981),t he massive seaweed washouts on Mediterranean beaches (Morand & Briand 1996),or the deposition of algal mats in the northern Baltic (Norkko & Bonsdorff 1996a),t he quantities of macrodetritus on the shore in the study area are average,ev en allowing for the fact that the Baltic Sea is highly eutrophic (HELCOM 2005).
Źródło:
Oceanologia; 2005, 47, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design concepts of gaseous detonation guns for thermal spraying
Principy konstruirovanija detonacionno-gazovykh ustanovok dlja napylenija pokrytijj
Autorzy:
Kharlamov, Y.
Kharlamov, M.
Powiązania:
https://bibliotekanauki.pl/articles/792142.pdf
Data publikacji:
2013
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
gaseous detonation
structural analysis
coating deposition
thermal spraying
conventional coating techniqu
energy source
oscillatory system
dynamic characteristics
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2013, 13, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antimicrobial Characteristics of Pulsed Laser Deposited Metal Oxides on Polypropylene Hydroentangled Nonwovens for Medical Textiles
Właściwości przeciwdrobnoustrojowe włóknin polipropylenowych pokrytych tlenkami metali stosowanych w wyrobach medycznych
Autorzy:
Ramamurthy, P.
Chellamani, K. P.
Dhurai, B.
ThankaRajan, S. P.
Subramanian, B.
Santhini, E.
Powiązania:
https://bibliotekanauki.pl/articles/949467.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
antibacterial activity
metal oxides
pulsed laser deposition
energy dispersive X-ray
EDX
polypropylene
hydroentangled nonwoven
działanie antybakteryjne
tlenki metali
polipropylen
włóknina
wyroby medyczne
Opis:
In this study, an attempt was made to investigate the antimicrobial activity on polypropylene (PP) hydroentangled nonwoven fabrics coated with transition metal oxides. After etching the nonwoven fabrics with RF plasma, nano-scale coatings of ZnO and CuO were done using the KrF excimer based pulsed laser deposition technique (PLD). Morphological and antimicrobial studies were carried out to elucidate the mechanism of antibiocidal behaviour of the coated fabrics. Results showed significant antibacterial activity of ZnO and CuO coated PP hydroentangled nonwovens with a better activity against gram positive S.aureus than gram negative E.coli. Inherently non-toxic, PP has excellent chemical resistance and the use of specialised PP fibres for hydroentangled nonwovens could offer scope in addition to metal oxide coatings; nano-scale biological materials such as enzymes and drugs could add specific functionality for their use as medical textiles.
W pracy podjęto próbę zbadania aktywności przeciwdrobnoustrojowej polipropylenowych włóknin pokrytych tlenkami metali. Przeprowadzono badania morfologiczne i przeciw- drobnoustrojowe powlekanych włóknin. Wyniki wykazały znaczną aktywność antybakteryjną włóknin pokrytych ZnO i CuO, przy czym wyższą aktywność antybakteryjną zaobserwowano wobec bakterii Gram-dodatnich (Staphylococcus ureus), niż wobec Gram-ujemnych (Escherichia coli). Stwierdzono, że zastosowanie nietoksycznego polipropylenu, który charakteryzuje się bardzo dobrą odpornością chemiczną, do wytwarzania włóknin powlekanych tlenkami metali pozwala na otrzymanie funkcjonalnych produktów medycznych.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 2 (122); 112-119
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polytetrafluoroethylene thin films obtained by the pulsed electron beam deposition method at different gas pressures
Cienkie powłoki politetrafluoroetylenowe otrzymane metodą pulsacyjnej ablacji elektronowej w warunkach zmiennego ciśnienia
Autorzy:
Jędrzejewski, R.
Piwowarczyk, J.
Kwiatkowski, K.
Baranowska, J.
Powiązania:
https://bibliotekanauki.pl/articles/945860.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
polytetrafluoroethylene thin film
pulsed electron beam deposition
background gas pressure
chemical structure
hydrophobicity
surface free energy
cienkie powłoki politetrafluoroetylenowe
pulsacyjna ablacja elektronowa
ciśnienie gazu roboczego
struktura chemiczna
hydrofobowość
swobodna energia powierzchniowa
Opis:
Polytetrafluoroethylene (PTFE) coatings were manufactured using the pulsed electron beam deposition (PED) technique. The presence of a PTFE structure was confirmed by means of Fourier transform infrared spectrometry (FT-IR). The surface morphology and roughness were characterized by atomic force microscopy (AFM). A pressure increase leads to a decrease in the material transport from the target to the substrate. The water contact angle (WCA) and surface free energy (SFE) were examined. The hydrophobic properties were preserved after film deposition.
Cienkie powłoki z politetrafluoroetylenu (PTFE) wytwarzano metodą pulsacyjnej ablacji elektronowej (PED) z zastosowaniem zmiennego ciśnienia gazu roboczego. Techniką spektroskopii w podczerwieni z transformacją Fouriera (FT-IR) potwierdzono strukturę chemiczną osadzonej cienkiej warstwy. Za pomocą mikroskopii sił atomowych (AFM) oceniano morfologię i chropowatość otrzymanej powierzchni. Wyznaczono kąt zwilżania (WCA) i swobodną energię powierzchniową (SFE) powłok z PTFE. Stwierdzono, że zachowują one hydrofobowe właściwości politetrafluoroetylenu. Zwiększenie wartości zastosowanego w procesie ciśnienia wpłynęło na zmniejszenie grubości osadzanej warstwy PTFE w wyniku pogorszenia transportu materiału z targetu (tarczy) do podłoża.
Źródło:
Polimery; 2017, 62, 10; 743-749
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies