Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zakusylo, Roman" wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
Examing the selection of a fuel component for low energy mixtures
Badania w zakresie doboru materiału palnego składnika do mieszanin niskoenergetycznych
Autorzy:
Zakusylo, Roman
Romanchenko, Anzhela
Powiązania:
https://bibliotekanauki.pl/articles/27787677.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
potassium chlorate(VII)
diesel fuel
nitromethane
heat of explosion
volume of explosion gases
detonation velocity
chloran(VII) potasu
olej napędowy
nitrometan
ciepło wybuchu
objętość gazowych produktów wybuchu
prędkość detonacji
Opis:
The efficiency of an explosive mixture based on potassium chlorate(VII) (PP) with decomposition catalyst and selected combustible component was determined. The results of researches of the thermodynamic characteristics of explosive mixtures with combustible components (diesel fuel and nitromethane) are presented. Thermodynamic calculations of mixed explosives were performed using the Avakyan method. Energy and explosive characteristics such as heat of explosion, temperature of explosion, volume of gases at explosion, oxygen balance, detonation speed and explosiveness, are determined. According to qualitative and quantitative analysis of gas generation, it is established that toxic gases such as NO2, CO and Cl2 are present in quantities up to 0.13 mol/kg, meaning that the explosives based on PP are safe for the environment and workers in quarries.
Określono wydajność mieszaniny wybuchowej na bazie nadchloranu potasu z katalizatorem rozkładu i wybranym składnikiem palnym. Przedstawiono wyniki badań charakterystyk termodynamicznych mieszanin wybuchowych ze składnikami palnymi (olej napędowy i nitrometan). Obliczenia termodynamiczne mieszanych materiałów wybuchowych przeprowadzono metodą Avakyan. Wyznaczane są charakterystyki energetyczne i wybuchowe, takie jak: ciepło wybuchu, temperatura wybuchu, objętość gazów podczas wybuchu, bilans tlenowy, prędkość detonacji, wysoka wybuchowość. Na podstawie jakościowej i ilościowej analizy powstawania gazów podczas wybuchu ustalono, że gazy toksyczne takie jak NO2, CO i Cl2 występują w ilości do 0,13 mol/kg, w wyniku czego kompozycje wybuchowe oparte na nadchloran potasu są bezpieczne dla środowiska i pracowników kopalni odkrywkowych.
Źródło:
Materiały Wysokoenergetyczne; 2021, 13; 82--88
2083-0165
Pojawia się w:
Materiały Wysokoenergetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Shear Flow of Guncotton Pulp
Autorzy:
Banishevsky, Victor
Zakusylo, Roman
Zakusylo, Daryna
Powiązania:
https://bibliotekanauki.pl/articles/27787828.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
guncotton pulp
viscometry
shear flow
shear stress
torque
Opis:
This article considers aspects of the flow, rheology, and viscometry of guncotton pulp. It is substantiated that during production guncotton pulp is subjected to shear deformation, taking into account sliding over smooth surfaces, in the input zones of the dies, in the barrel, and on the crimped finned tube of the screw extruder. At the same time, the presence of shear stress in guncotton pulp has not been established. A rotational viscometer with a torque meter, which was developed during this research, enabled the presence of shear stress in guncotton pulp to be demonstrated. The values of the flow stress depend on the solvent content in the guncotton pulp; as this is decreased, the τ0 value increases. When the flow curve for the section from τ0 to τRmax was constructed, the flow curves of the guncotton pulp were described by the Herschel-Bulkley equation. The flow curves of guncotton pulp obtained on corrugated capillaries of different sizes are non-invariant and depend on the magnitude of the deformation of the guncotton pulp in the capillaries. Guncotton pulp flows in a narrow range of pressures and deformations.
Źródło:
Central European Journal of Energetic Materials; 2021, 18, 1; 124--142
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the Striker Material on the Results of High-Speed Impact at a Barrier
Autorzy:
Voitenko, Yuri
Zakusylo, Roman
Zaychenko, Stefan
Powiązania:
https://bibliotekanauki.pl/articles/27787968.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
porosity
striker
shaped charge
shock compression
penetration
shock wave front
Opis:
In this work the influence of the characteristics of the material of the striker (cumulative jet or projectile), moving at speeds of 2-10 km/s, on the volume of the resulting crater in a metal target, has been studied. The dependence of the crater volume in an aluminum alloy target of Cu-Al, W-Cu-Pb-Al composites, and steel St45 for a PTFE-Cu composite, were investigated. The outer diameter and height of the shaped charges were 26 and 28, and 31 and 33 mm, respectively. The mass of the explosive (phlegmatized hexogen) in these charges was 10 and 18 g. A comparison was made between the ratios of the kinetic energy of the striker to the volume of the crater formed for the composites PTFE-Al, PTFE-Cu, Cu-Al, Ni-Al, W-Cu-Pb, and porous materials Cu and Al. It was demonstrated that the chemical interaction of the components of the porous Cu-Al and Ni-Al composites during penetration into the barrier is possible at an impact velocity of at least 2-3 km/s and a porosity of at least 30%.
Źródło:
Central European Journal of Energetic Materials; 2021, 18, 3; 405--423
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regularities of Spheroidization of HMX Extracted from Solid Propellant Disposal Products
Autorzy:
Cheltonov, Maksym
Zakusylo, Roman
Ustymenko, Ievhen
Powiązania:
https://bibliotekanauki.pl/articles/1062839.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
solid propellant
octogen
spheroidization
dimethyl sulfoxide
Opis:
Nitramines of high quality for manufacturing high-energy composites, such as oсtogen (HMX) and hexogen, have received much attention by researchers worldwide. Mixed formulations containing fillers in the form of spheroidal dispersed particles of explosives are homogenized at lower energy consumption. They are characterized by stable rheological characteristics, which guarantee the quality of the products obtained on the basis thereof. Methods for obtaining spherical nitramine particles by means of ultrasonic and hydromechanical rounding using commercial HMX were evaluated. It was found that under similar conditions, rounding by the hydromechanical process in a vortex device is more efficient and less energy-consuming than that of the ultrasonic method. It was confirmed that spheroidization of commercial HMX in an aqueous dimethyl sulfoxide (DMSO) medium by hydromechanical rounding occurs due to erosion of crystals of large size (70 μm or more). Based on the experimental results with spheroidization of commercial nitramine, the mass fraction content below 50 μm versus time was plotted for hydromechanical rounding. The method of hydromechanical rounding in aqueous DMSO to obtain spheroidized HMX, extracted from solid propellant using DMSO, was found to be the most suitable. Spheroidized modified HMX with specific characteristics (density and crystals of near-spherical shape) was obtained, which could be used for the manufacture of high-energy composites.
Źródło:
Central European Journal of Energetic Materials; 2020, 17, 4; 523-534
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the use of green chemistry principles in the production of gasless pyrotechnic compositions
Analiza wykorzystania zasad zielonej chemii w produkcji bezgazowych kompozycji pirotechnicznych
Autorzy:
Zakusylo, Daryna
Sereda, Vita
Zakusylo, Roman
Powiązania:
https://bibliotekanauki.pl/articles/27787817.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
gasless composition
green chemistry
production
skład bezgazowy
zielona chemia
produkcja
Opis:
The article deals with the issue of a rather unusual component of green chemistry, namely green pyrotechnics. The complexity and danger of the production, storage and usage of pyrotechnic compositions carry a significant ecological threat. An analytical study of the peculiarities of using green chemistry principles in gasless pyrotechnic composition production was carried out. Research in this area will help to find empirical approaches to the application of relevant green chemistry principles, which will help bring gasless pyrotechnic compositions into the green chemistry domain and make these productions environmentally safer and contemporary.
Artykuł porusza zagadnienie dość nietypowego składnika zielonej chemii, jakim jest zielona pirotechnika. Należy zauważyć, że złożoność i niebezpieczeństwo produkcji, przechowywania i stosowania kompozycji pirotechnicznych niesie ze sobą istotne zagrożenie ekologiczne. Przeprowadzono analityczne badanie specyfiki wykorzystania zasad zielonej chemii w produkcji bezgazowych kompozycji pirotechnicznych. Dalsze badania w tej dziedzinie pomogą znaleźć podejścia empiryczne do zastosowania odpowiednich zasad zielonej chemii, które pomogą wprowadzić bezgazowe mieszaniny pirotechniczne do klastra zielonej chemii i uczynić te produkcje bardziej bezpiecznymi dla środowiska i zmodernizowanymi.
Źródło:
Materiały Wysokoenergetyczne; 2022, 14(S); 141--145
2083-0165
Pojawia się w:
Materiały Wysokoenergetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technological applications of border effects by hole charges system explosion
Technologiczne wykorzystanie efektów granicznych wybuchu systemu ładunków otworowych
Autorzy:
Kravets, Viktor
Shukurov, Azar
Zakusylo, Roman
Kovtun, Andrij
Powiązania:
https://bibliotekanauki.pl/articles/1063124.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
explosive
border effect
tamping
overdrill
modelling
cutter break
priming charge
conic charge
metallic laying
power stream
materiał wybuchowy
efekt graniczny
przybitka
nadmierne przebicie
modelowanie
perforacja
ładunek inicjujący
ładunek stożkowy
warstwa metaliczna
strumień energii
Opis:
W technika strzelniczej w przemyśle górniczym wykorzystuje głównie wydłużone ładunki wybuchowe, gdyż zapewnia to optymalne rozmieszczenie materiałów wybuchowych w obszarze, w którym niszczony jest górotwór. Zdecydowanie najczęściej stosuje się otwarte otwory strzałowe, gdyż ułatwia to ich elaborację. Ładunek materiału wybuchowego umieszczany w otworze strzałowym powinien spełniać kilka funkcji. Przede wszystkim, powinien efektywnie kruszyć górotwór wokół otworu strzałowego. Powinien także zabezpieczać przed wystąpieniem efektu nieprawidłowej fragmentacji górotworu wokół otworu strzałowego. Zmniejszenie lub całkowita likwidacja efektu nieprawidłowej fragmentacji górotworu jest możliwa w wyniku wprowadzenia rozwiązań strukturalnych, powodujących zmianę kierunku strumienia energii wybuchu w pożądany sposób. W omawianym obszarze nadal poszukiwane są nowe rozwiązania. W pracy przeprowadzono analizę rozwoju procesu deformacji górotworu w strefie wybuchu, w celu opracowania metody zabezpieczającej przed niewłaściwym przebiegiem fragmentacji materiału skalnego.
Źródło:
Materiały Wysokoenergetyczne; 2019, 11, 2; 21-30
2083-0165
Pojawia się w:
Materiały Wysokoenergetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Change of dynamic characteristics of foamed explosive substances under the influence of ultrasonic radiation
Zmiana charakterystyki dynamicznej spienionych materiałów wybuchowych pod wpływem promieniowania ultradźwiękowego
Autorzy:
Boiko, Viktor
Kravets, Viktor
Han, Anatolii
Han, Olena
Zakusylo, Roman
Powiązania:
https://bibliotekanauki.pl/articles/27787678.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
foamed explosive composition
ammonium nitrate
aluminum powder
surfactants
device for ultrasonic radiation
spieniona kompozycja wybuchowa
azotan amonu
proszek aluminiowy
środek powierzchniowo czynny
urządzenie do oddziaływania ultradźwiękowego
Opis:
Compositions of low-density foamed explosives based on ammonium nitrate (AN), surfactants and aluminum powder were obtained. The dynamic and physico-chemical characteristics of the foamed substances were determined and the influence of ultrasonic radiation on them researched. The dependence of the physical stability of foamed explosives on the effect of ultrasonics on AN was obtained and it was found that the greatest physical stability was achieved when treating AN with ultrasonic radiation for 4 min. The scheme of the device and the method of preparation of such low-density foamed explosives are described. The use of low-speed mechanical mixing of the surfactant solution and treatment with ultrasonic radiation and crushed AN with the addition of 3-4% of dispersed aluminum resulted in materials, which, after appropriate aeration, can be fed directly to the blasting site.
Otrzymano kompozycję spienionych materiałów wybuchowych o małej gęstości, na bazie azotanu amonu (AA), roztworu środków powierzchniowo-czynnych i proszku aluminiowego. Określono właściwości dynamiczne i fizykochemiczne proponowanych kompozycji spienionych oraz zbadano wpływ na nie promieniowania ultradźwiękowego. Uzyskano zależność trwałości fizycznej spienionych materiałów wybuchowych od oddziaływania bodźca ultradźwiękowego i stwierdzono, że największą stabilność fizyczną uzyskuje się przy oddziaływaniu ultradźwięków na AA przez 4 min. Przedstawiono schemat urządzenia i sposób przygotowania takich spienionych materiałów wybuchowych o małej gęstości. Za pomocą wolnoobrotowego mechanicznego mieszania roztworu środka powierzchniowo-czynnego poddanego działaniu ultradźwięków i rozdrobnionego AA z dodatkiem 3-4% zdyspergowanego aluminium. Uzyskane materiały, o odpowiednim napowietrzeniu, mogą być stosowane bezpośrednio na miejscu prowadzenia robót strzałowych.
Źródło:
Materiały Wysokoenergetyczne; 2021, 13; 89--95
2083-0165
Pojawia się w:
Materiały Wysokoenergetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regularities of the energy of formation field in the explosion of a conical charge
Autorzy:
Kravets, Viktor
Zakusylo, Roman
Sydorenko, Yuri
Shukurov, Azer
Sałaciński, Tomasz
Zakusylo, Daryna
Powiązania:
https://bibliotekanauki.pl/articles/358636.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
shock wave
conical charge
density isolines
energy flow
field vector
nitromethane
potassium perchlorate
ammonium nitrate
trinitrotoluene
Opis:
The process of formation of the energy field by the explosion of a conical charge has been mathematically simulated. The features of the development of the energy field, depending on the point of initiation of the truncated cone explosive charge, were determined. The complex nature of the use of a charge at the bottom of a borehole with an intermediate conically-shaped detonator is discussed. Possible technological directions for using a charge with a complex shape are proposed.
Źródło:
Central European Journal of Energetic Materials; 2019, 16, 4; 533-546
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Functional Materials in Mechanical Engineering and Geology
Autorzy:
Voitenko, Yuri I.
Zakusylo, Roman V.
Wojewódka, Andrzej T.
Gontar, Pavlo A.
Gerlich, Marcin M.
Drachuk, Oleksanr G.
Powiązania:
https://bibliotekanauki.pl/articles/358024.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
shaped charge
liner
polytetrafluorethylene
pores
penetration
Opis:
New composite materials are proposed, which allow shaped charges to be used with increased efficiency, for purposes, such as special engineering and geotechnical applications, as well as in other industries. The main determinant of efficiency is the volume of the hole created in the target. The future directions of new materials production for shaped charges are shown.
Źródło:
Central European Journal of Energetic Materials; 2019, 16, 1; 135-149
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies