Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sedlakova, V." wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
Leakage Current Degradation Due to Ion Drift and Diffusion in Tantalum and Niobium Oxide Capacitors
Autorzy:
Kuparowitz, M.
Sedlakova, V.
Grmela, L.
Powiązania:
https://bibliotekanauki.pl/articles/221515.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
niobium oxide capacitors
tantalum capacitors
leakage current
ion diffusion
ion drift
Opis:
High temperature and high electric field applications in tantalum and niobium capacitors are limited by the mechanism of ion migration and field crystallization in a tantalum or niobium pentoxide insulating layer. The study of leakage current (DCL) variation in time as a result of increasing temperature and electric field might provide information about the physical mechanism of degradation. The experiments were performed on tantalum and niobium oxide capacitors at temperatures of about 125°C and applied voltages ranging up to rated voltages of 35 V and 16 V for tantalum and niobium oxide capacitors, respectively. Homogeneous distribution of oxygen vacancies acting as positive ions within the pentoxide layer was assumed before the experiments. DCL vs. time characteristics at a fixed temperature have several phases. At the beginning of ageing the DCL increases exponentially with time. In this period ions in the insulating layer are being moved in the electric field by drift only. Due to that the concentration of ions near the cathode increases producing a positively charged region near the cathode. The electric field near the cathode increases and the potential barrier between the cathode and insulating layer decreases which results in increasing DCL. However, redistribution of positive ions in the insulator layer leads to creation of a ion concentration gradient which results in a gradual increase of the ion diffusion current in the direction opposite to the ion drift current component. The equilibrium between the two for a given temperature and electric field results in saturation of the leakage current value. DCL vs. time characteristics are described by the exponential stretched law. We found that during the initial part of ageing an exponent n = 1 applies. That corresponds to the ion drift motion only. After long-time application of the electric field at a high temperature the DCL vs. time characteristics are described by the exponential stretched law with an exponent n = 0.5. Here, the equilibrium between the ion drift and diffusion is achieved. The process of leakage current degradation is therefore partially reversible. When the external electric field is lowered, or the samples are shortened, the leakage current for a given voltage decreases with time and the DCL vs. time characteristics are described by the exponential stretched law with an exponent n = 0.5, thus the ion redistribution by diffusion becomes dominant.
Źródło:
Metrology and Measurement Systems; 2017, 24, 2; 255-264
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostic of ZnO varistors by means of nondestructive testing
Diagnostyka warystorów z ZnO z zastosowaniem metod nieniszczących
Autorzy:
Hasse, L.
Smulko, J.
Olesz, M.
Sedlakova, V.
Sikula, J.
Sedlak, P.
Powiązania:
https://bibliotekanauki.pl/articles/266744.pdf
Data publikacji:
2011
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
warystor
diagnostyka
testowanie metodami nieniszczącymi
varistor
diagnostics
nondestructive testing
Opis:
Standard industrial testing of high-voltage varistors for surge arresters demands application of high voltages and intensive currents. Nondestructive methods for varistor quality and endurance evaluation have been proposed and described. They rely on the application of resonant ultrasound spectroscopy, electroultrasonic spectroscopy, noise measurement and nonlinearity testing at voltages lower than continuous operating range. The achieved results show that these methods could be successively applied for varistor specimens at the production stage and in laboratory circumstances.
Normatywne testy przemysłowe warystorów wysokonapięciowych stosowanych w ogranicznikach przepięć wymagają użycia wysokich napięć oraz prądów o odpowiednio dużych wartościach. Zaproponowano i opisano metody nieniszczące do oceny jakości i trwałości warystorów. Polegają one na zastosowaniu rezonansowej spektroskopii ultradźwiękowej, spektroskopii elektro-ultradźwiękowej, pomiarów szumów i testowaniu nieliniowości w zakresie napięć mniejszych od ciągłego napięcia pracy. Uzyskane wyniki wskazują, że metody nieniszczące mogą być z powodzeniem stosowane w odniesieniu do struktur warystorowych, zarówno w warunkach produkcyjnych jak i laboratoryjnych.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2011, 30; 51-56
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of noise and non-linearity of I-V characteristics of positive temperature coefficient chip thermistors
Autorzy:
Sita, Z.
Sedlakova, V.
Majzner, J.
Sedlak, P.
Sikula, J.
Grmela, L.
Powiązania:
https://bibliotekanauki.pl/articles/220721.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
PTC chip sensors
noise spectroscopy
I-V characteristic non-linearity
quality evaluation
Opis:
Noise spectroscopy and I-V characteristic non-linearity measurement were applied as diagnostic tools in order to characterize the volume and contact quality of positive temperature coefficient (PTC) chip sensors and to predict possible contact failure. Correctly made and stable contacts are crucial for proper sensing. I-V characteristics and time dependences of resistance were measured for studied sensors and, besides the samples with stable resistance value, spike type resistance fluctuation was observed for some samples. These spikes often disappear after about 24 hours of voltage application. Linear I-V characteristics were measured for the samples with stable resistance. The resistance fluctuation of burst noise type was observed for some samples showing the I-V characteristic dependent on the electric field orientation. We have found that the thermistors with high quality contacts had a linear I-V characteristic, the noise spectral density is of 1/f type and the third harmonic index is lower than 60 dB. The samples with poor quality contacts show non-linear I-V characteristics and excess noise is given by superposition of g-r and 1/fn type noises, and the third harmonic index is higher than 60 dB.
Źródło:
Metrology and Measurement Systems; 2013, 20, 4; 635-644
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Voltage Dependence of Supercapacitor Capacitance
Autorzy:
Szewczyk, A.
Sikula, J.
Sedlakova, V.
Majzner, J.
Sedlak, P.
Kuparowitz, T.
Powiązania:
https://bibliotekanauki.pl/articles/221295.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Electronic Double-Layer Capacitor (EDLC)
charge diffusion
recovery voltage
Opis:
Electronic Double-Layer Capacitors (EDLC), called Supercapacitors (SC), are electronic devices that are capable to store a relatively high amount of energy in a small volume comparing to other types of capacitors. They are composed of an activated carbon layer and electrolyte solution. The charge is stored on electrodes, forming the Helmholtz layer, and in electrolyte. The capacitance of supercapacitor is voltage- dependent. We propose an experimental method, based on monitoring of charging and discharging a supercapacitor, which enables to evaluate the charge in an SC structure as well as the Capacitance-Voltage (C-V) dependence. The measurement setup, method and experimental results of charging/discharging commercially available supercapacitors in various voltage and current conditions are presented. The total charge stored in an SC structure is proportional to the square of voltage at SC electrodes while the charge on electrodes increases linearly with the voltage on SC electrodes. The Helmholtz capacitance increases linearly with the voltage bias while a sublinear increase of total capacitance was found. The voltage on SC increases after the discharge of electrodes due to diffusion of charges from the electrolyte to the electrodes. We have found that the recovery voltage value is linearly proportional to the initial bias voltage value.
Źródło:
Metrology and Measurement Systems; 2016, 23, 3; 403-411
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultrasonic spectroscopy of silicon single crystal
Autorzy:
Sedlak, P.
Tofel, P.
Sedlakova, V.
Majzner, J.
Sikula, J.
Hasse, L.
Powiązania:
https://bibliotekanauki.pl/articles/220554.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
silicon single crystal
electro-ultrasonic spectroscopy
resonant ultrasonic spectroscopy
Opis:
Specimens of Si single crystals with different crystal orientation [100] and [110] were studied by Electro-Ultrasonic Spectroscopy (EUS) and Resonant Ultrasonic Spectroscopy (RUS). A silicon single crystal is an anisotropic crystal, so its properties are different in different directions in the material relative to the crystal orientation. EUS is based on interaction of two signals: an electric AC signal and an ultrasonic signal, which are working on different frequencies. The ultrasonic wave affects the charge carriers' transport in the structures and the intermodulation electrical signal which is created due to the interaction between the ultrasonic wave and charge carriers, is proportional to the density of structural defects. RUS enables to measure natural frequencies of free elastic vibrations of a simply shaped specimen by scanning a selected frequency range including the appropriate resonances of the measured specimens.
Źródło:
Metrology and Measurement Systems; 2011, 18, 4; 621-630
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Supercapacitor Degradation Assesment by Power Cycling and Calendar Life Tests
Autorzy:
Sedlakova, V.
Sikula, J.
Majzner, J.
Sedlak, P.
Kuparowitz, T.
Buergler, B.
Vasina, P.
Powiązania:
https://bibliotekanauki.pl/articles/221305.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
supercapacitor equivalent circuit
supercapacitor parameter evaluation
supercapacitor reliability
power cycling life test
calendar life test
Opis:
Degradation of Supercapacitors (SC) is quantified by accelerated ageing tests. Energy cycling tests and calendar life tests are used since they address the real operating modes. The periodic characterization is used to analyse evolution of the SC parameters as a whole, and its Helmholtz and diffusion capacitances. These parameters are determined before the ageing tests and during 3 × 105 cycles of both 75% and 100% energy cycling, respectively. Precise evaluation of the capacitance and Equivalent Series Resistance (ESR) is based on fitting the experimental data by an exponential function of voltage vs. time. The ESR increases linearly with the number (No) of cycles for both 75% and 100% energy cycling, whereas a super-linear increase of ESR vs. time of cycling is observed for the 100% energy cycling. A decrease of capacitance in time had been evaluated for 2000 hours of ageing of SC. A relative change of capacitance is ΔC/C0 = 16% for the 75% energy cycling test and ΔC/C0 = 20% for the 100% energy cycling test at temperature 25°C, while ΔC/C0 = 6% for the calendar test at temperature 22°C for a voltage bias V = 1.0 Vop. The energy cycling causes a greater decrease of capacitance in comparison with the calendar test; such results may be a consequence of increasing the temperature due to the Joule heat created in the SC structure. The charge/discharge current value is the same for both 75% and 100% energy cycling tests, so it is the Joule heat created on both the equivalent series resistance and time-dependent diffuse resistance that should be the source of degradation of the SC structure. The diffuse resistance reaches a value of up to 30Ω within each 75% energy cycle and up to about 43Ω within each 100% energy cycle.
Źródło:
Metrology and Measurement Systems; 2016, 23, 3; 345-358
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current Fluctuation Measurements of Amperometric Gas Sensors Constructed with Three Different Technology Procedures
Autorzy:
Sedlak, P.
Kubersky, P.
Skarvada, P.
Hamacek, A.
Sedlakova, V.
Majzner, J.
Nespurek, S.
Sikula, J.
Powiązania:
https://bibliotekanauki.pl/articles/220663.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
current fluctuations
noise measurement
amperometric sensor
solid polymer electrolytes
Opis:
Electrochemical amperometric gas sensors represent a well-established and versatile type of devices with unique features: good sensitivity and stability, short response/recovery times, and low power consumption. These sensors operate at room temperature, and therefore have been applied in monitoring air pollutants and detection of toxic and hazardous gases in a number of areas. Some drawbacks of classical electrochemical sensors are overcome by the solid polymer electrolyte (SPE) based on ionic liquids. This work presents evaluation of an SPE-based amperometric sensor from the point of view of current fluctuations. The sensor is based on a novel three-electrode sensor platform with solid polymer electrolytes containing ionic liquid for detection of nitrogen dioxide − a highly toxic gas that is harmful to the environment and presenting a possible threat to human health even at low concentrations. The paper focuses on using noise measurement (electric current fluctuation measurement) for evaluation of electrochemical sensors which were constructed by different fabrication processes: (i) lift-off and drop-casting technology, (ii) screen printing technology on a ceramic substrate and (iii) screen printing on a flexible substrate.
Źródło:
Metrology and Measurement Systems; 2016, 23, 4; 531-543
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric analysis to predict annual heating demand of single-storey house
Analiza parametrów determinujących roczne zapotrzebowanie na ciepło dla budynków jednokondygnacyjnych
Autorzy:
Geletka, V.
Sedlakova, A.
Powiązania:
https://bibliotekanauki.pl/articles/2065104.pdf
Data publikacji:
2012
Wydawca:
Politechnika Częstochowska
Tematy:
single-storey house
annual heating demand
architectural and constructional solutions
standard heating requirements
energy efficiency
jednokondygnacyjne budynki mieszkalne (typu bungalow)
roczne zapotrzebowanie na energię
rozwiązania architektoniczne i materiałowo-konstrukcyjne
wymagania ochrony cieplnej
efektywność energetyczna
Opis:
The quality of most buildings may be affected during the initial phase of architectural design. Therefore, it is important to optimize input parameters, which significantly influence energy efficiency. In principle, it is possible to speak of a deterministic approach, which considers input parameters to be fixed, or a stochastic approach, which takes a wider set of input parameters into account. A reference building is evaluated in terms of energy performance, where input parameters are changed in order to determine a correlation coefficient. Regressions were written to express the impact architectural design has on energy performance.
W pracy przedstawiono analizę wpływu wybranych rozwiązań architektonicznych i materiałowo-konstrukcyjnych na wartość rocznego zapotrzebowania na ciepło do ogrzewania jednokondygnacyjnych budynków mieszkalnych (typu bungalow). Analizie poddano współczynnik kształtu, izolacyjność cieplną przegród - współczynnik przenikania ciepła, orientację w stosunku do stron świata, mostki termiczne, wielkość przeszklenia budynków, zyski ciepła od promieniowania słonecznego. Przedstawiono histogramy oraz współczynniki regresji.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2012, 2 (10); 22--28
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy and environmental profile of low – energy house – case study
Energetyczny i środowiskowy profil budynku o niskim zapotrzebowaniu na energię – studium przypadku
Autorzy:
Vilcekova, S.
Sedlakova, A.
Kridlova Burdova, E.
Geletka, V.
Powiązania:
https://bibliotekanauki.pl/articles/2065190.pdf
Data publikacji:
2013
Wydawca:
Politechnika Częstochowska
Tematy:
building
low-energy house
embodied energy
emissions
environmental impacts
budynki o niskim zapotrzebowaniu na energię
emisja
oddziaływanie na środowisko
Opis:
Integrated building design should take into account environmental, social and economic dimensions of sustainability. Building design from energy performance ranges from architectural design to the application of technologies for energy conservation. Many applications are focused on insulation of facades, roofs and floors to those that are used systems for renewable energy sources. The aim of the innovations is not only energy saving but also reduces costs and preserves natural resources. One key element of low-energy building design is using the basic form and enclosure of a building to save energy while enhancing occupant comfort. Besides energy need for building operation the significant part of the total energy is energy used in the extraction, processing and transportation of materials used in buildings. This study is aimed to analyze the building materials and structures in terms of embodied environmental impacts and monitoring of physical factors of indoor environment. The paper deals with evaluation of environmental and energy indicators in selected low-energy family house and its optimization in order to reduction of environmental impacts.
Zintegrowany projekt budowlany powinien uwzględniać środowiskowe, społeczne i ekonomiczne aspekty zrównoważonego rozwoju. Projektowanie budynków w zakresie efektywności energetycznej obejmuje różne aspekty, począwszy od projektu architektonicznego aż po wykorzystanie technologii związanych z oszczędzaniem energii. Wiele uwagi przywiązuje się do prawidłowej izolacji ścian, dachów i podłóg aż po zastosowanie systemów wykorzystujących odnawialne źródła energii. Celem innowacji jest nie tylko oszczędzanie energii, ale również obniżenie kosztów i ochrona zasobów naturalnych. Niniejsze opracowanie koncentruje się na analizie materiałów budowlanych i konstrukcji w odniesieniu ich do oddziaływania na środowisko oraz na monitorowaniu fizycznych parametrów środowiska wewnętrznego. W pracy przedstawiono ocenę wskaźników energetycznych i środowiskowych w wybranym budynku o niskim zapotrzebowaniu na energię i ich optymalizację w celu zmniejszenia oddziaływania na środowisko.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2013, 2 (12); 137--147
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies