Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Park, I." wg kryterium: Autor


Tytuł:
Cavitation Damage Behavior in Seawater for Al-Mg Alloy Arc Thermal Spray Coating with Mg Content
Autorzy:
Park, I.
Kim, S.
Powiązania:
https://bibliotekanauki.pl/articles/1186994.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.77.Fv
81.15.Rs
Opis:
Al arc thermal spray coating materials are widely used to prevent the corrosion of steel structure materials in marine environment. To improve the durability of the Al alloy thermal spray coating layer, Al-Mg alloy arc thermal spray coating was performed with different Mg contents. Furthermore, the cavitation experiment was performed in natural seawater to evaluate the durability of the thermal spray coating layer, and the damaged surface was analyzed with a scanning electron microscope and a 3D microscope. As a result, the durability of the Al-Mg alloy thermal spray coating layer improved by the addition of Mg, and the Al-3%Mg thermal spray coating layer presented the best characteristics.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 572-577
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Nickel Powders by Reduction of Nickel Hydroxide Using the Taylor Fluid Flow
Autorzy:
Park, I.-J.
Kim, D.-W.
Kim, G.-H.
Chae, H.-J.
Jung, H.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355021.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni(OH)2
nickel
Taylor fluid flow
fine powder
Opis:
In this study, Ni(OH)2 was synthesized by the continuous reaction by the Taylor fluid flow and compared with those prepared from the conventional batch type reaction. The nickel powders were synthesized by reduction of Ni(OH)2 in an aqueous solution with hydrazine hydrate acting as the reductant. And then the characteristics of the nickel powder according to the synthesis method were compared. The average particle size of the synthesized Ni(OH)2 using Taylor reactor was generally decreased about 1.5~2.5 times more than the batch reaction. The nickel powders prepared by the batch reaction highly agglomerated with non-uniform particles. In the Taylor reaction, the agglomeration of particles was broken and uniform nickel powder was produced.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1443-1447
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and performance of fly ash granule filter for trapping gaseous cesium
Autorzy:
Park, J. J.
Shin, J. M.
Yang, J. H.
Park, G. I.
Powiązania:
https://bibliotekanauki.pl/articles/147633.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
fabrication
gaseous cesium
granule filters
performance test
pyroprocessing
trapping
Opis:
Although a disk-type fly ash filter has shown a good performance in trapping gaseous cesium, it has difficulty in charging filters into a filter container and discharging waste filters containing radioactive cesium from a container by remote action. To solve the difficulty of the disk-type fly ash filter, five types of granule filters, including a ball type, tube type, and sponge-structure type have been made. Among them, the best filter type was chosen through simple crucible tests. The five types of granule filters packed into containers were loaded into five alumina crucibles of 50 cc. Five grams of CsNO3 was used as a gaseous cesium source. They were then placed in a muffle furnace and heated to 900°C and maintained for 2 hours. After the experiment, the weights of the cesium trapped filters were measured. Among the five types of granule filters, the sponge-structure type granule filter was the best, which has the highest trapping capacity of cesium. Its capacity is 0.42 g-Cs/g-filter. The chosen sponge-structure type granule filters and disk-type filters have been tested using a two-zone tube furnace. Cs volatilization and Cs trapping zones were maintained at 900 and 1000°C, respectively. Sixteen grams of CsNO3 was used as a gaseous cesium source. The cesium trapping profile of the sponge-structure type granule filters was almost similar to that of the disk-type fly ash filters. For both cases, cesium was successfully trapped within the third filter.
Źródło:
Nukleonika; 2015, 60, No. 3, part 2; 565-570
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Cladding Hull Wastes from Used Nuclear Fuels
Charakterystyka odpadów z okładzin reaktora wodnego ciśnieniowego
Autorzy:
Kang, K. H.
Lee, C. H.
Jeon, M. K.
Han, S. Y.
Park, G. I.
Hwang, S.-M.
Powiązania:
https://bibliotekanauki.pl/articles/357036.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
used nuclear fuels
metal waste
cladding hulls
zircaloy
radioactivity
reaktor wodny ciśnieniowy
odpady metalowe
odpady z okładzin
radioaktywność
Opis:
Used cladding hulls from pressurized water reactor (PWR) are characterized to provide useful information for the treatment and disposal of cladding hull wastes. The radioactivity and the mass of gamma emitting nuclides increases with an increase in the fuel burn-up and their removal ratios are found to be more than 99 wt.% except Co-60 and Cs-137. In the result of measuring the concentrations of U and Pu included in the cladding hull wastes, most of the residues are remained on the surface and the removal ratio of U and Pu are revealed to be over 99.98 wt.% for the fuel burn-up of 35,000 MWd/tU. An electron probe micro-analyzer (EPMA) line scanning shows that radioactive fission products are penetrated into the Zr oxide layer, which is proportional to the fuel burn-up. The oxidative decladding process exhibits more efficient removal ratio of radionuclides.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1199-1203
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Fe Content on the Contact Resistance of Electroplated Au-Fe Alloy Layers
Autorzy:
Park, H. S.
Son, I.
Powiązania:
https://bibliotekanauki.pl/articles/352468.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electroplating
Au-Fe alloy
contact resistance
thermal aging
Opis:
In this study, variations in the contact resistance of electroplated Au-Fe alloy layers with Fe content were investigated. The contact resistance of electroplated Au-Fe alloy layers that were subject to thermal aging at 260°C in the atmosphere, tended to increase significantly with an increase in the Fe content. Through an analysis method employing X-ray photoelectron spectroscopy (XPS/ESCA) and Auger electron spectroscopy (AES), Ni oxides, such as NiO and Ni2O3, on the surface of the thermally aged electroplated Au-Fe alloy layers were observed. It is believed that the Ni oxide existing on the surface diffused from the underlying electroplated Ni layers to the surface through the grain boundaries in the electroplated Au-Fe layers during the thermal aging. As the Fe content in the electroplated Au-Fe layers increased, the grain size decreased. As the grain size decreases, more Ni oxide was detected on the surface. Therefore, with a rise in the Fe content, more Ni diffuses to the surface via grain boundaries, and more Ni oxide is formed on the surface of the electroplated Au-Fe layers, increasing the contact resistance of the electroplated Au-Fe alloy layers.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1503-1507
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on the Electrical Characteristics and Oxidation Resistance of the STS434L-High Chrome Powder Green Compact at the High-Temperature
Autorzy:
Park, J. W.
Jung, W. Y.
Park, D. K.
Ahn, I. S.
Powiązania:
https://bibliotekanauki.pl/articles/354543.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel
fecraloy
oxidation resistance
metallic oxide
Opis:
Metallic oxide layer of heat resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation, and also has positive effect on the electrical resistivity increase. In this study, the green compacts of Fe-Cr-Al powder mixed with STS434L were oxidized at 950°C up to 210 hrs in order to consider the effect of metal oxide on the oxidation and electrical resistance. It exhibited the low oxidation resistance in case of 434L only, however it increased as the amount of Fe-Cr-Al powder in the 434L compact. The higher electrical resistivity was observed at the Fe-Cr-Al compact with and 434L powder. The metal oxides of (Fe0.6C0.4)2O3, Cr2O3, and Fe2O3 contributed to the electrical resistivity, whereas Al2O2 took a role of oxidation resistance.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 431-435
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth of NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ Superconducting Thin Films on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) Substrates
Autorzy:
Park, J.-C.
Ha, D. H.
Kim, I.-S.
Park, Y.K.
Powiązania:
https://bibliotekanauki.pl/articles/1964239.pdf
Data publikacji:
1997-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.76.Bz
Opis:
NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ superconducting thin films were grown on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) substrates by off-axis rf sputtering and pulsed laser deposition. The effects of several deposition parameters, e.g. gas pressure, substrate temperature and energy density were studied. Thin films grown by off-axis rf sputtering were highly c-axis oriented, but those by pulsed laser deposition were predominantly a-axis oriented under our deposition conditions. However, the c-axis oriented portion for the films grown by pulsed laser deposition was increased by increasing the temperature above 800°C. T$\text{}_{c(zero)}$ was 87 K and 83 K for the c- and a-axis oriented films respectively. The critical current density of c-axis oriented films was 10$\text{}^{6}$-10$\text{}^{7}$ A/cm$\text{}^{2}$ below 60 K.
Źródło:
Acta Physica Polonica A; 1997, 92, 1; 105-114
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The High Temperature Oxidation Stability of STS434L/Silicon Oxide Compacts
Autorzy:
Park, J. W.
Ko, B. H.
Jung, W. Y.
Park, D. K.
Ahn, I. S.
Powiązania:
https://bibliotekanauki.pl/articles/352481.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-temperature oxidation stability
metallic oxide
densification
Opis:
In order to improve the high-temperature oxidation stability, a study of 434L sintered stainless steel was focused on the effect of addition of metallic oxides to form stable oxide film on the inner particle surface. In this paper, oxidation behavior of 434L compacted parts in accordance with the addition of metallic oxides were discussed with high temperature oxidative reaction, and sintering behavior analysis under 950°C. Oxidation weight gains of 434 L have increased as a form of parabolic laws. The hightemperature oxidation resistance was improved by the mixed addition of amorphous SiO2 and silica up to 2wt.%. The oxidation rate was decreased and kept constant after 60 hours. It was caused by the restraint succeeding oxidation due to the stable oxide formation of Cr2SiO4 phases on the particle surface to prevent densification and inhibition the external diffusion of Cr. High-temperature stability was confirmed by the electrical resistivity maintains the constant value of 1.3×10-2 Ω ·cm when the silica added less than 2w/o to 1w/o A-SiO2 added 434L.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 307-313
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Maritime traffic characteristics in waterway with time variant CPA
Autorzy:
Jeong, J.S.
Park, G.K.
Kim, K. I.
Powiązania:
https://bibliotekanauki.pl/articles/320550.pdf
Data publikacji:
2013
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
maritime traffic management
operation rate
risk assessment
collision
CPA
TCPA
Opis:
This paper aims at evaluating the collision risk between the encountering vessels under time- -variant CPA situations and then assessing the maritime traffic characteristics. Radar and AIS data are collected from Mokpo VTS in Korea. All crossing vessels that are navigating within CPA 1 miles of Mokpo-Gu waterway are analyzed. The maritime traffic characteristics is analyzed by surveying the distribution of CPA as a function of TCPA. To make it clear, the traffic operating rate in the Mokpo waterway is also computed. The averages of CPA and TCPA were observed until the encountered vessels pass safety each other after they come in a certain ship domain. As a consequence, the distribution of CPA as a function of TCPA gives a useful information to evaluate the maritime traffic safety.
Celem artykułu jest ocena ryzyka kolizji statków w funkcji zmiany wartości czasu do kolizji, a na tej podstawie oszacowanie charakterystyk determinujących ruch morski. Dane z radarów oraz systemu AIS zostały zarejestrowane w systemie VTS Mokpo w Korei. Przeanalizowano wszystkie przypadki przecinania się tras statków na podejściu do Mokpo-Gu w przypadku, gdy odległość minimalna (CPA) była mniejsza niż jedna mila morska. Charakterystyka ruchu morskiego opisana została poprzez wyznaczenie rozkładu wartości największego zbliżenia statków jako funkcji czasu do nadmiernego zbliżenia (TCPA). Dla pełnej jasności obliczono również współczynnik przepustowości drogi wodnej Mokpo. Opisano średnie wartości odległości największego zbliżenia oraz czasu do wystąpienia CPA bez względu na przekroczenia granic domeny obserwowanych statków. W konsekwencji wyznaczono rozkład wartości CPA jako funkcję TCPA, co okazuje się użyteczne dla oceny bezpieczeństwa ruchu morskiego.
Źródło:
Annual of Navigation; 2013, 20; 49-58
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alumina Coating To Realize Desired Pore Characteristics Of Sintered Diatomite Membrane
Powłoka tlenku glinu do uzyskania pożądanej porowatości spiekanej membrany diatomitowej
Autorzy:
Ha, J. H.
Park, Y.-H.
Song, I.-H.
Powiązania:
https://bibliotekanauki.pl/articles/354776.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
diatomite membrane
alumina coatings
largest pore size
membrana diatomitowa
powłoka tlenku glinu
porowatość
Opis:
Porous ceramic membranes prepared from natural materials such as diatomite, have lately attracted great interest in industrial applications due to their cost-effectiveness. In this study, we attempted to prepare an alumina coating to be deposited over a sintered diatomite-kaolin composite support layer in order to reduce the largest pore size to below 0.4 μm; such a coating could be potentially used in water treatment applications for bacterial removal.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1175-1178
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Ni Content on the Austenite Stability and Mechanical Properties of Nanocrystalline Fe-Ni Alloy Fabricated by Spark Plasma Sintering
Autorzy:
Park, D.
Oh, S.-J.
Shon, I.-J.
Lee, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/352972.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Fe-Ni alloy
austenite stability
mechanical properties
spark plasma sintering
Opis:
The mechanical behavior and the change of retained austenite of nanocrystalline Fe-Ni alloy have been investigated by considering the effect of various Ni addition amount. The nanocrystalline Fe-Ni alloy samples were rapidly fabricated by spark plasma sintering (SPS). The SPS is a well-known effective sintering process with an extremely short densification time not only to reach a theoretical density value but also to prevent a grain growth, which could result in a nanocrystalline structures. The effect of Ni addition on the compressive stress-strain behavior was analyzed. The variation of the volume fraction of retained austenite due to deformation was quantitatively measured by means of x-ray diffraction and microscope analyses. The strain-induced martensite transformation was observed in Fe-Ni alloy. The different amount of Ni influenced the rate of the strain-induced martensite transformation kinetics and resulted in the change of the work hardening during the compressive deformation.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1477-1480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Range resolution improvement of range-gated vision system in backscattering hazy environments
Autorzy:
Park, S.-K.
Choi, I.-Y.
Baik, S.-H.
Jeong, K.-M.
Powiązania:
https://bibliotekanauki.pl/articles/174523.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
range-gated vision system
range image
windowed center-of-mass
cross-correlation
Gaussian window
Opis:
A range-gated vision system simultaneously provides two-dimensional and range images because its light intensity contains the reflectance as well as depth information. The range-resolution of the system is usually inversely proportional to the induced backscattering noise. In this paper, a range imaging technique is proposed to precisely measure range information from highly backscattering foggy environments. A windowed center-of-mass position extracted from the peak area of a cross-correlation signal of two signals, a Gaussian window signal in reduced size and a range-gated signal according to distance, is adopted as the range depth. The proposed measuring technique provides more robust and more precise range information than conventional measuring techniques for hazy targets by virtue of the reduction of backscattering bias noise usually induced by airborne particles. The experimental results and the signal processing procedures to acquire precise range information from hazy targets are described in this paper.
Źródło:
Optica Applicata; 2017, 47, 4; 533-543
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Conductivity and Microstructure of Copper Coated Graphite Composite by Spark Plasma Sintering Process
Autorzy:
Park, S. H.
Kim, D. B.
Lee, R. G.
Son, I. J.
Powiązania:
https://bibliotekanauki.pl/articles/355632.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metal matrix composites
thermal conductivity
thermal expansion
interfacial bonding
spark plasma sintering
Opis:
This study focuses on the fabrication of thermal management material for power electronics applications using graphite flake reinforced copper composites. The manufacturing route involved electroless plating of copper in the graphite flake and sintering process are optimized. The microstructures, interface, thermal properties, and relative density of graphite/Cu composites are investigated. The relative density of the composites shows 99.5% after sintering. Thermal conductivities and coefficients of thermal expansion of this composites were 400-480 Wm-1K-1 and 8 to 5 ppm k-1, respectively. Obtained graphite nanoplatelets-reinforced composites exhibit excellent thermo-physical properties to meet the heat dispersion and matching requirements of power electronic devices to the packaging materials.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1303-1306
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Characterization of Metallic Fuel Slugs Prepared by Modified Injection Casting
Autorzy:
Mun, S.-U.
Kim, K.-H.
Oh, S.-J.
Park, J.-Y.
Hong, S.-I.
Powiązania:
https://bibliotekanauki.pl/articles/351428.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium-cooled fast reactor
metallic fuel slug
U-Zr alloy
surface characterization
injection casting
Opis:
Metallic fuel slugs containing rare-earth (RE) elements have high reactivity with quartz (SiO2) molds, and a reaction layer with a considerable thickness is formed at the surface of metallic fuel slugs. The surface characterization of metallic fuel slugs is essential for safety while operating a fast reactor at elevated temperature. Hence, it is necessary to evaluate the surface characteristics of the fuel slugs so that chemical interaction between fuel slug and cladding can be minimized in the reactor. When the Si element causes a eutectic reaction with the cladding, it deteriorates the metallic fuel slugs. Thus, it is necessary to examine the characteristics of the surface reaction layer to prevent the reaction of the metallic fuel slugs. In this study, we investigated the metallurgical characteristics of the surface reaction layer of fabricated U-10wt.%Zr-Xwt.%RE (X = 0, 5, 10) fuel slugs using injection casting. The results showed that the thickness of the surface reaction layer increased as the RE content of the metallic fuel slugs increased. The surface reaction layer of the metallic fuel slug was mainly formed by RE, Zr and the Si, which diffused in the quartz mold.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1049-1053
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pharmacokinetics and pharmacodynamics (PK/PD) of irbesartan in Beagle dogs after oral administration at two dose rates
Autorzy:
Carlucci, L.
Song, K.H.
Yun, H.I.
Park, H.J.
Seo, K.W.
Giorgi, M.
Powiązania:
https://bibliotekanauki.pl/articles/31017.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Irbesartan (Irb) is an angiotensin II type 1 receptor antagonist widely used in humans to treat hypertension. Age-related diseases such as hypertension are increasingly being diagnosed in dogs and there is the need for new drugs. The PK/PD of Irb was tested in Beagle dogs. Ten healthy Beagles were orally administered two dose rates (2 and 5 mg/kg), according to a cross over study design. Blood collections for PK analysis and systolic blood pressure (SBP), heart and respiratory rate, mucous membranes colour, capillary refill time and temperature evaluations were performed at scheduled intervals. The drug plasma concentration was dose dependent. The dogs administered 5 mg/kg showed a significant reduction in SBP, while in those receiving 2 mg/kg, this parameter was minimally affected. A counter clockwise hysteresis showed no direct correlation between SBP and plasma concentrations. The minimum effective concentration was theorized to be within the range 550-800 ng/mL. Although further studies are necessary, 5 mg/kg seems to be the more appropriate dose to obtain a hypotensive effect in Beagle dogs.
Źródło:
Polish Journal of Veterinary Sciences; 2013, 16, 3
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies