Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Han, J. Y." wg kryterium: Autor


Tytuł:
Annealing Study of Al/GaSb Contact with the Use of Doppler Broadening Technique
Autorzy:
Wang, H. Y.
Weng, H. M.
Ling, C. C.
Ye, B. J.
Zhou, X. Y.
Han, R. D.
Powiązania:
https://bibliotekanauki.pl/articles/2043365.pdf
Data publikacji:
2005-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
68.35.Ct
73.40.Sx
Opis:
Using a monoenergetic positron beam, annealing study of the Al/n-GaSb system was performed by monitoring the Doppler broadening of the annihilation radiation as a function of the positron implanting energy. The S-parameter against positron energy data was successfully fitted by a three-layer model (Al/interface/GaSb). The annealing out of the open volume defects in the polycrystalline Al layer was revealed by the decrease in the S-parameter and the increase in the effective diffusion length of the Al layer. For the as-deposited samples, a 5 nm interfacial region with S-parameter larger than those of the Al overlayer and the bulk was identified. After the 400ºC annealing, this interfacial region extends to over 40 nm and its S-parameter dramatically drops. This is possibly due to the new phase formation at the interface. Annealing behaviors of S$\text{}_{B}$ and L$\text{}_{+,B}$ of the GaSb bulk showed the annealing out of positron traps (possibly the V$\text{}_{Ga}$-related defect) at 250ºC. However, a further annealing at 400ºC induces the formation of positron traps, which are possibly of another kind of V$\text{}_{Ga}$-related defect and the positron shallow trap GaSb antisite.
Źródło:
Acta Physica Polonica A; 2005, 107, 5; 874-879
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Interaction of Water with Glycine: A Combined Inelastic Neutron Scattering and Raman Spectra Studies
Autorzy:
Zhang, P.
Zhang, Y.
Han, S.
Yan, Q.
Li, J.
Powiązania:
https://bibliotekanauki.pl/articles/2044762.pdf
Data publikacji:
2006-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
36.20.Ng
87.64.Je
25.40.Fq
82.30.Rs
Opis:
The vibrational dynamics of water around glycine was investigated by using Raman spectroscopy and inelastic neutron scattering. Experiments of deuterated glycine versus deuterium were performed as comparison. The study shows that for glycine, the exchange of proton-deuteron on the active NH$\text{}_{3}^{+}$ side was easy, whereas there was hardly exchange on the CH$\text{}_{2}$ side. Comparing different proportion of glycine vs. water molecules we obtained that the presence of water hardly changes the main features of glycine illustrating its hydrophobic character. The intralayer hydrogen bonds of glycine crystal are difficult to be replaced due to its stronger bond than water.
Źródło:
Acta Physica Polonica A; 2006, 109, 3; 399-404
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Ships Safety Control System
Autorzy:
Han, X. J.
Meng, X. Y.
Wang, Z. W.
Powiązania:
https://bibliotekanauki.pl/articles/117442.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Safety of Navigation
ships safety
Control System
Ships Safety Control System
Ship Accidents
Human Factor
Control Strategy
Accident Precaution
Opis:
The proportion of main reasons of ships accidents to the whole reasons is discussed in the paper. Among these reasons, human factors are in the majority. So a method to prevent wrong orders sent by a navigator is laid emphasis on. On the basis of this, a ships safety control system is studied. The construction and control principle of the ships safety control system, as well as control strategy, implementation method and key technology are elaborated in the paper.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2009, 3, 1; 19-22
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antioxidant activity and mechanism in flower of Hylocereus undatus (Haw.) Britt. et Rose
Autorzy:
Li, X.
Gao, Y.
Han, W.
Lin, J.
Hu, Q.
Chen, D.
Powiązania:
https://bibliotekanauki.pl/articles/19838.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Hylocereus undatus flower is commonly used as food or for medicinal purposes in south China. To study its antioxidant activity and mechanism we used antioxidant and chemical assays to compare two commercial samples from different locations (Shenjing, Qixing). The difference in antioxidant levels corresponded with differences in chemical content (including total phenolics, total flavonoids, kaempferol and quercetin) between Shenjing and Qixing. The antioxidant ability of H. undatus flower seems attributable to total phenolics (mainly total flavonoids). Kaempferol is one of the main bioactive components. H. undatus flower exerts its antioxidant effects through metal chelation and radical scavenging via hydrogen atom (H•) and electron (e) donation.
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2013, 55, 1
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flexible Software Design for Korean WA-DGNSS Reference Station
Autorzy:
Choi, W.S.
Chhattan, S.S.
Kye, J.E.
Han, W.Y.
Yun, H.
Kee, C.
Powiązania:
https://bibliotekanauki.pl/articles/116770.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Global Navigation Satellite System (GNSS)
Flexible Software Design
Wide area Reference Station (WRS)
Opis:
In this paper, we describe the software design results of WA‐DGNSS reference station that will be constructed in Korea in the near future. Software design of the WRS (Wide area Reference Station) is carried out by applying object oriented software methodology in order to provide flexibilities: easy of model change (namely ionospheric delay model etc) and system addition (Galileo, GLONASS in addition to GPS etc). Software design results include the use case diagrams for the functions to be executed, the architecture diagram showing components and their relationships, the activity diagrams of behaviors and models among them, and class diagrams describing the attribute and operation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2013, 7, 1; 75-78
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of medicinal plant Schisandra chinensis using a potential DNA barcode ITS2
Autorzy:
Li, X.-K.
Wang, B.
Han, R.-C.
Zheng, Y.-C.
Yin, H.-B.
Xu, L.
Zhang, J.-K.
Xu, B.-L.
Powiązania:
https://bibliotekanauki.pl/articles/56996.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
identification
internal transcribed spacer
medicinal plant
Schisandra chinensis
DNA barcode
Opis:
To test whether the internal transcribed spacer 2 (ITS2) region is an effective marker for using in authenticating of the Schisandra chinensis at the species and population levels, separately. And the results showed that the wild populations had higher percentage of individuals that had substitution of C→A at site 86-bp than the cultivated populations. At sites 10-bp, 37-bp, 42-bp and 235-bp, these bases of the Schisandra sphenanthera samples differed from that of S. chinensis. Two species showed higher levels of inter-specific divergence than intra-specific divergence within ITS2 sequences. However, 24 populations did not demonstrate much difference as inter-specific and intra-specific divergences were concerned. Both S. chinensis and S. sphenanthera showed monophyly at species level, yet the samples of different populations shown polyphyly at population level. ITS2 performed well when using BLAST1 method. ITS2 obtained 100% identification success rates at the species level for S. chinensis, with no ambiguous identification at the genus level for ITS2 alone. The ITS2 region could be used to identify S. chinensis and S. sphenanthera in the “Chinese Pharmacopoeia”. And it could also correctly distinguish 100% of species and 100% of genera from the 193 sequences of S. chinensis. Hence, the ITS2 is a powerful and efficient tool for species identification of S. chinensis.
Źródło:
Acta Societatis Botanicorum Poloniae; 2013, 82, 4
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wzrost i właściwości optyczne kryształu BaGd2 (MoO4)4 domieszkowanego Er3+
Growth and optical properties of Er3+-doped BaGdcrystal 2 (MoO4)4
Autorzy:
Han, S.
Wang, J.
Zhang, H.
Pan, S.
Xv, H.
Wang, Y.
Shen, C.
Powiązania:
https://bibliotekanauki.pl/articles/142191.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
Wytwarzanie kryształów
ciepło właściwe
widmo
czas trwania fluorescencji
crystal growth
specific heat
spectrum
fluorescence lifetime
Opis:
Pojedynczy kryształ BaGd2(MoO4)4 domieszkowany 1% at. Er3+ wyhodowano metodą Czochralskiego. Omówiono szczegóły procedury otrzymywania i wzrostu kryształu. Kryształ ma doskonałą płaszczyznę poślizgu (010), a jego łupliwość czyni go przydatnym jako ośrodek czynny w mikrolaserach. Zmierzono widmo absorpcyjne w zakresie światła widzialnego i bliskiej podczerwieni (NIR) w temperaturze pokojowej. W zakresie od 380 do 1600 nm występuje kilka intensywnych pików absorpcyjnych. Zmierzono również widmo fluorescencyjne wzbudzane za pomocą lampy ksenonowej. Zaobserwowano intensywny pik emisyjny NIR 1536 nm. Czasy trwania fluorescencji 4I13/2 oraz 4I11/2 wyznaczone za pomocą dopasowania krzywej wykładniczej wyniosły odpowiednio 5,85 ms i 112,62 μs. Ciepło właściw Er3+ BaGd2(MoO4)4 w 25°C wynosi 0,471 J g-1 K-1. Na podstawie zmierzonych widm obliczono parametry optyczne na podstawie teorii Judda-Ofelta (J–O).
A 1 at % Er3+ doped BaGd2(MoO4)4 single crystal was grown by the Czochralski method. Details on the preparation and growth procedures were discussed. The crystal has a perfect (010) cleavage plane, and the cleavage character makes the crystal suitable as a gain medium for microchip lasers. The absorption spectrum in the visible and near-infrared (NIR) regions was measured at room temperature. There are several strong absorption peaks in the range from 380 to 1600 nm. The fluorescence spectrum excited by a Xenon lamp was also measured. A strong NIR emission peak located at 1536 nm was observed. The fluorescence lifetimes of 4I13/2 and 4I11/23+:BaGd2(MoO4)4 at 25°C is 0.471 J g-1 K-1. Using the measured spectra, the optical parameters were calculated using the J–O theory.
Źródło:
Chemik; 2013, 67, 9; 763-770
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morphology Change Of Si Deposit In Molten Salt Electrorefining
Zmiana morfologii osadu Si podczas elektrorafinacji w stopionych solach
Autorzy:
Ryu, H. Y.
Kwon, S. C.
Han, M. H.
An, Y. S.
Lee, J. S.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/354346.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
molten salt
silicon
morphology
electrorefining
current density
sól stopiona
krzem
morfologia
elektrorafinacja
gęstość prądu
Opis:
The effects of processing parameters on the morphology change in a Si deposit recovered by means of molten salt electrorefining are evaluated using electrochemical techniques such as cyclic voltammetry and chronopotentiometry at 800°C. It was found that concentration of K2SiF6 and current density were important parameters in determining deposit size. Higher concentrations of K2SiF6 were effective in coarsening the silicon deposit and decreasing the cell potential. Silicon nanofiber was recovered at 5 wt% of K2SiF6 whereas dense particles were prepared at 30 and 50 wt% of K2SiF6. The morphology of the Si deposit was determined by the concentration of Si in the electrolyte which is related to the formation of crystal and growth of Si. The formation mechanism of the Si deposit was interpreted by using high resolution TEM as well as electrochemical properties.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1491-1497
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective reduction of PbSO4 to PbS with carbon and flotation treatment of synthetic galena
Autorzy:
Zheng, Y.-X.
Liu, W.
Qin, W.-Q.
Han, J.-W.
Yang, K.
Luo, H.-L.
Powiązania:
https://bibliotekanauki.pl/articles/110717.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wastes
lead sulfate
reduction
carbon
lead sulfide
flotation
Opis:
In order to recover lead from the zinc leaching residues, a new technology involving selective reduction of lead sulfate to lead sulfide with carbon followed by flotation was investigated. The reduction thermodynamics of PbSO4 was discussed and the effects of molar ratio of C to PbSO4, reaction temperature and time were examined by thermogravimetry (TG) and XRD. Verification tests were further carried out to prove the conclusions of thermodynamic and TG analyses, and the transformation extent could reach 86.45% under the optimal roasting conditions. The prepared galena was then subjected to micro-flotation tests, and the highest lead recovery could reach up to 75.32%.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 535-546
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on Discharge Characteristics by Using MF and RF Power in Remote Dielectric Barrier Discharge
Autorzy:
Kim, D.
Shim, Y.
Kim, H.
Han, J.
Powiązania:
https://bibliotekanauki.pl/articles/1398758.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.77.Bn
Opis:
We have developed an atmospheric pressure plasma apparatus of remote dielectric barrier discharge (RDBD) applicable for a large area. We have systematically studied the characteristics of medium frequency (MF, 40 kHz) and radio frequency (RF, 13.56 MHz) discharge using an optical emission spectroscope. Nitrogen (N₂) and argon (Ar) gases were used in the MF and RF discharge excitation, respectively, in a mixture with clean dry air (CDA). The peak of oxygen radical (O*₂) appears at 259.3 nm when the RDBD is employed. Furthermore, intensive peaks are observed at gas ratios of N₂:CDA=100:1 in MF excitation and at gas ratios of Ar:CDA=70:0.5 in RF discharge excitation. On the other hand, the contact angle shows about 5° in PET samples after the RDBD treatment using the RF and MF discharge excitation. Surface analyses of polyethylene terephthalate (PET) samples were carried out using an atomic force microscope and X-ray photoelectron spectroscope.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 707-710
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Generation and characterization of a monoclonal antibody against duck Tembusu virus envelope protein
Autorzy:
Han, K.
Zhao, D.
Liu, Y.
Liu, Q.
Huang, X.
Yang, J.
Bi, K.
Xu, T.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/31495.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Duck Tembusu virus (DTMUV) is a newly emerging pathogenic flavivirus that has caused massive economic losses to the duck industry in China. Envelope (E) protein of DTMUV is an important structural protein, which is able to induce protective immune response in target animals and can be used as specific serological diagnosis tool. In this study, a novel monoclonal antibody, designated mAb 3E9, was generated against DTMUV E protein. It is positive in indirect ELISA against both His-E protein and the purified whole viral antigen. Also, this mAb showed positive reaction with DTMUV in Western blot and indirect immunofluorescence assay, and the isotype was IgG1. End-point neutralizing assay performed in BHK-21 cells revealed that the neutralization titer of 3E9 against DTMUV JS804 strain reached 1:50. Furthermore, functional studies revealed that 3E9 blocks infection of DTMUV at a step on viral attachment. The anti-E mAbs produced in the present work may be valuable in developing an antigen-capture ELISA test for antigen detection or a competitive ELISA test for antibody detection or therapeutic medicine for DTMUV in poultry.
Źródło:
Polish Journal of Veterinary Sciences; 2016, 19, 4
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption behavior of Zn(II) onto natural minerals in wastewater. A comparative study of bentonite and kaolinite
Autorzy:
Chai, W.
Huang, Y.
Su, S.
Han, G.
Liu, J.
Cao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/109926.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorption
Zn(II)
wastewater
clay minerals
structural properties
Opis:
In order to remove the harmful metal ions in lead-zinc mineral processing wastewater, two natural clay minerals (bentonite and kaolin) were used as adsorbents and Zn(II) ions were the emphasis in this work. The adsorption behaviors including kinetics and isotherms were investigated by batch experiments. In addition, the adsorption mechanisms were studied by means of zeta potential testing, optical microscope and XRD analysis. The results show that the adsorption process can be best described as the pseudo-second order kinetic model. The adsorption equilibrium data of bentonite and kaolinite can be respectively fitted best by Langmuir and Freundlich models. Thermodynamic studies display that the adsorption of Zn(II) onto clays is non-spontaneous and endothermic. The maximum capacity of Zn(II) adsorbed on bentonite and kaolinite respectively reaches to 79.2 mg·g-1 and 6.35 mg·g-1 at 25 °C. The structural differences of bentonite and kaolinite result in the differences in adsorption behavior and mechanism. The interaction mechanisms of Zn(II) with bentonite and kaolinite involve electrostatic attraction, cation exchange, surface complex and precipitation. Bentonite as adsorbent has the potential to remove Zn2+ better than kaolinite.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 264-278
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An active fault-tolerant control framework against actuator stuck failures under input saturations
Autorzy:
Qi, X.
Theilliol, D.
He, Y.
Han, J.
Powiązania:
https://bibliotekanauki.pl/articles/331084.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
fault tolerant control
actuator stuck failure
actuator constraints
reference redesign
linear matrix inequality
sterowanie tolerujące uszkodzenia
projekt odniesienia
liniowa nierówność macierzowa
Opis:
In this paper, a control framework including active fault-tolerant control (FTC) and reference redesign is developed subject to actuator stuck failures under input saturations. FTC synthesis and reference redesign approaches are proposed to guarantee post-fault system safety and reference reachability. Then, these features are analyzed under both actuator stuck failures and constraints before fault-tolerant controller switches. As the main contribution, actuator stuck failures and constraints are unified so that they can be easily considered simultaneously. By means of transforming stuck failures into actuator constraints, the post-fault system can be regarded as an equivalent system with only asymmetrical actuator constraints. Thus, methods against actuator saturations can be used to guarantee regional stability and produce the stability region. Based on this region, stuck compensation is analyzed. Specifically, an unstable open-loop system is considered, which is more challenging. Furthermore, the method is extended to a set-point tracking problem where the reachability of the original reference can be evaluated. Then, a new optimal reference will be computed for the post-fault system if the original one is unreachable. Finally, simulation examples are shown to illustrate the theoretical results.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2017, 27, 4; 749-761
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved Mechanical Properties of Al-Si Alloys by Adding an Extrusion Process to Conventional Processing Method
Autorzy:
Han, J. Y.
Femi, O. E.
Kilicaslan, F.
Jeong, C. U.
Baeg, C. H.
Hong, S. J.
Koo, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/355114.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al-Si alloys
extrusion
mechanical properties
Opis:
In this study, the mechanical properties of Al-Si alloys was improved by selecting higher Si content and avoiding distortion in Al-Si matrix by adding an extrusion process such that the fabrication processes casting and extrusion were in sequence. Cast billets were extruded at ratios 4:1 and 10:1 to obtained two extruded bars with different processing parameters. The as-extruded samples were characterized and investigated for microstructure and mechanical properties. Optical Microscope was used to examined phase morphologies and microstructures of the extruded Al-Si bars. Mechanical properties were conducted on each sample to study the effectiveness of the additional extrusion process in high Si content Al-Si alloys. The result shows that by increasing the extrusion ratio, the size of the primary Si particle reduces leading to a higher density, better tensile and yield strength compared to the cast billet.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1179-1183
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Effects of Mold Temperature on the Injection Molded Article
Autorzy:
Han, J.-H.
Kim, Y.-C.
Powiązania:
https://bibliotekanauki.pl/articles/351919.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
injection molding
mold temperature
cooling temperature
molded article
Opis:
This is a study of the effects of temperature of injection mold on the injection molded article. By supplying water of the proper temperature in the cooling line of mold in the cooling process, the mold was the appropriate temperature, and the deformation of the injection molded article was examined according to the mold temperature. In this study, we conducted simulation analysis and experiments, and the results were analyzed. The minimum deformation of the injection molded article model obtained by supplying 50°C water in the cooling line is 0.003 mm, and the maximum deformation was 0.813 mm. Injection molded article models obtained by supplying 20°C water were found to be a minimum of 0.002 mm, with deformation of up to 0.761 mm. When comparing both conditions, the error rate of injection molded article obtained by supplying 20°C water in the mold cooling line was lower by about 0.18%.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1271-1274
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies