Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Bieleń, Wojciech" wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Aryl isoprenoids as indicators of the nature of the sedimentation environment
Związki arylowoizoprenoidowe jako wskaźniki charakteru środowiska sedymentacji
Autorzy:
Bieleń, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/1835089.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
izoprenoidy arylowe
izorenieratan
siarka elementarna
środowisko sedymentacji
fotyczna strefa anoksyczna
aryl isoprenoids
isorenieratane
elemental sulfur
depositional environment
photic anoxic zone
Opis:
This work aimed to identify compounds from the group of aryl isoprenoids, including higher homologues, as well as to identify elemental sulfur. On this basis, the environment of sedimentation of organic matter, the occurrence of the photic anoxic zone were determined. 18 bitumen extracts from samples from the Krosno and Menilite Beds were selected for this purpose. The material for the research came from the southern part of the Silesian Unit, from the southern limb of the Gorlice Fold. The samples were analyzed using GC-MS. GC-MS analysis in the MS-MS mode was used for the identification of higher aryl isoprenoids, such as: diaryl C28 and C40 isoprenoids, or isorenieratane, allowing to determine the compounds with high probability. Aryl isoprenoids (short and medium chain), higher diaryl isoprenoids, isorenieratane and elemental sulfur were identified. The aryl – isoprenoid AIR index was calculated. Samples from the Krosno Beds and from the Menilite Beds were examined for: the nature of the sedimentation environment, including photic anoxic zone (PZA), bacterial activity during the sedimentation of organic matter and the origin of organic matter. For most of the tested samples from the Krosno Beds, the presence of trimethyl aryl isoprenoids in the limited range of homologues was found. It was determined that the nature of the sedimentation environment was variable. For most of the samples from the Menilite Beds, the presence of trimethyl aryl isoprenoids was found over the full range of homologues, which allowed to calculate the aryl-isoprenoid index (AIR). It was determined that for most samples, the sedimentation environment conditions were strongly reductive and there was a persistent photic anoxic zone. Samples 7 and 14 exhibit the characteristics of a suboxic sediment environment. The participation of bacteria (including Chlorobiaceae) in the sedimentation of organic matter was indicated. Evidence of a high proportion of terrestrial material (Angiospermae and conifers) has been shown (the presence of oleanane, high percentage of C29 sterane and the presence of retene).
Niniejsza praca miała na celu identyfikację związków z grupy arylowych izoprenoidów, w tym wyższych homologów, a także identyfikację siarki elementarnej. Na tej podstawie określono: środowisko sedymentacji materii organicznej, występowanie fotycznej strefy anoksycznej, a także szacunkowo okres jej trwania. W tym celu zostało wytypowanych 18 próbek ekstraktów bituminów pochodzących z warstw krośnieńskich i menilitowych. Materiał do badań pochodził z obrębu południowej części jednostki śląskiej, z południowego skrzydła fałdu Gorlic. Próbki zostały poddane analizie GC-MS. Pod kątem identyfikacji wyższych arylowych izoprenoidów, takich jak: diarylowe izoprenoidy C33 i C40 czy izorenieratan, zastosowano analizę GC-MS w trybie MS-MS, podwójną jonizację, co pozwoliło z dużym prawdopodobieństwem określić dane związki. Zidentyfikowano arylowe izoprenoidy (krótko- i średniołańcuchowe), wyższe diarylowe izoprenoidy, izorenieratan oraz siarkę elementarną. Obliczono wskaźnik arylowoizoprenoidowy AIR. Zbadano próbki z warstw krośnieńskich i z warstw menilitowych pod kątem: charakteru środowiska sedymentacji, w tym fotycznej strefy anoksycznej (PZA), działalności bakteryjnej podczas sedymentacji materii organicznej oraz pochodzenia materii organicznej. Dla większości badanych próbek z warstw krośnieńskich stwierdzono obecność niektórych homologów trimetylowych arylowych izoprenoidów. Ustalono, że charakter środowiska sedymentacji był zmienny. W większości próbek z warstw menilitowych stwierdzono obecność trimetylowych arylowych izoprenoidów w pełnym zakresie homologów, co pozwoliło obliczyć wskaźnik arylowoizoprenoidowy (AIR). Określono, że dla większości tych próbek warunki środowiska sedymentacji były silnie redukcyjne oraz występowała długotrwała fotyczna strefa anoksyczna. Próbki 7 i 14 wykazują cechy subtlenowego środowiska sedymentacji. Wskazano na udział bakterii (w tym Chlorobiaceae) w procesach sedymentacji materii organicznej. Udowodniono (obecność oleananu, duża procentowa zawartość steranu C29 oraz obecność retenu) wysoki udział materiału lądowego (typu roślin okrytonasiennych – Angiospermae oraz drzew iglastych). Opracowano metodykę identyfikacji: diarylowych izoprenoidów, izorenieratanu, beta-karotanu oraz siarki elementarnej.
Źródło:
Nafta-Gaz; 2019, 75, 9; 546-554
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie badań izotopowych do określania pochodzenia wybranych biomarkerów
Application of isotope analyses for determination of the origin of selected biomarkers
Autorzy:
Bieleń, Wojciech
Janiga, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2143240.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
spektrometria masowa
analiza izotopowa
biomarkery
pristan
fitan
substancja źródłowa
mass spectrometry
isotope analysis
biomarkers
pristane
phytane
organic matter
Opis:
Badania izotopowe n-alkanów, pristanu (Pr) oraz fitanu (Ph) przeprowadzono przy pomocy aparatu GC-IRMS. Porównanie wartości δ13C – pristanu do n-C17 oraz fitanu do n-C18, a także zestawienie wartości δ13C pomiędzy pristanem a fitanem w obrębie jednej próbki pomaga zidentyfikować źródło pochodzenia tych izoprenoidów, co było celem pracy. Ta ostatnia informacja uwiarygadnia lub podaje w wątpliwość wskaźnik środowiska sedymentacji – Pr/Ph. Wartości δ13C n-alkanów dla rop naftowych z tego samego złoża: Bóbrka 113, Niepodległość 2, Bandrów wskazują na pochodzenie tych rop od roślin C3 (fotosynteza typu C3) oraz z osadów rzecznych lub/i jeziornych. N-alkany występujące w tych trzech ropach naftowych mogą mieć mieszane źródła i pochodzić zarówno od roślin lądowych, jak i wodnych. Ropa naftowa Łodyna 90K może pochodzić z różnorakich wyższych roślin. Wartości δ13C n-alkanów z próbek ekstraktów bitumicznych Dukla 2A i Dukla 2D są charakterystyczne dla roślin C3. Pristan i fitan w badanych próbkach rop naftowych i w przypadku dwóch próbek ekstraktów bitumicznych Dukla 2A i Dukla 2D mają wartości δ13C niższe niż wartości δ13C dla n-C17 i n-C18, co sugeruje pochodzenie od organizmów heterotroficznych. We wszystkich badanych próbkach rop naftowych (wyjątki: Łodyna 90K, Osobnica 35) wartości δ13C dla Pr i Ph w obrębie pojedynczej próbki świadczą o tym samym materiale źródłowym dla tych izoprenoidów. Ta informacja potwierdza, że wskaźnik Pr/Ph, mówiący o typie środowiska sedymentacji materii organicznej, jest wiarygodny. W dwóch ekstraktach bitumicznych (Dukla 2D i Krosno 8) wartości δ13C dla Pr i Ph są różne, dlatego istnieje duże prawdopodobieństwo odmiennego pochodzenia dla tych dwóch izoprenoidów (należy być ostrożnym co do wiarygodności wskaźnika środowiska sedymentacji Pr/Ph).
Isotope analysis of n-alkanes, pristan (Pr) and phytane (Ph), were carried out on the GC-IRMS apparatus. Comparing the δ13C values of pristan to n-C17, phytane to n-C18 and pristan to phytane within one sample helps to identify the source of these isoprenoids. The latter information legitimises or questions the sedimentation environment index – Pr/Ph. The values of δ13C of n-alkanes for crude oil from one field: Bóbrka 113, Niepodległość 2, Bandrów indicate the origin of C3 plants (photosynthesis type C3) and river and / or lake sediments. The N-alkanes found in these three crude oils could have been sourced by organic matter from terrestrial and aquatic plants. Łodyna 90K crude oil was derived from a variety of higher plants. The δ13C values of n-alkanes for samples Dukla 2A and Dukla 2D bituminous extracts are characteristic for C3 plants. Pristan and phytan in the analyzed crude oil samples and in the case of two samples Dukla 2A and Dukla 2D bituminous extracts have δ13C values lower than the values of n-C17 and n-C18, which suggests their origin from heterotrophic organisms. In all analyzed crude oil samples (exceptions: Łodyna 90K, Osobnica 35) the δ13C values of Pr and Ph within a single sample indicate the same source material for these isoprenoids. This information confirms that the Pr/Ph ratio is reliable. In two bituminous extracts (Dukla 2D and Krosno 8) the δ13C values of Pr and Ph are different, therefore there is a high probability of different origins for these two isoprenoids (the Pr/Ph ratio may be unreliable).
Źródło:
Nafta-Gaz; 2022, 78, 5; 336-342
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ilościowa ocena i wydzielenie różnych form siarki w próbkach geologicznych wraz z zastosowaniem do badań pochodzenia związków siarki w systemach naftowych
Quantitative assessment and isolation of various sulphur forms in geological samples and its application in investigation of sulphur compounds origin in petroleum systems
Autorzy:
Wencel, Kinga
Bieleń, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/31343902.pdf
Data publikacji:
2023
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
kerogen
siarka redukowana chromem
CRS
warstwy menilitowe
bakteryjna redukcja siarczanów
analiza elementarna
izotopy siarki
chromium-reduced sulfur
Menilite Beds
bacterial sulfate reduction
elemental analysis
sulfur isotopes
Opis:
Siarka występuje w naturze w bogactwie form – jako siarka elementarna, siarczki, siarczany, organiczne związki siarki (OZS, ang. organic sulfur compounds, OSC). W pracy zbadano zależności pomiędzy występowaniem siarki w ropach i skałach macierzystych. Wydzielono siarkę pirytową, pierwiastkową, organiczną w kerogenie oraz OZS w bituminach. Do rozdzielenia siarki pirytowej pozostałej po izolacji kerogenu zastosowano metodę redukcji kwaśnym roztworem chlorku chromu (II) (ang. chromium reducible sulfur method, CRS), przeprowadzaną w inertnej atmosferze azotu w komorze rękawicowej. Zastosowanie CrCl2 w obecności HCl powoduje wydzielenie siarki pirytowej w postaci H2S. Siarkowodór jest następnie wprowadzany do roztworu AgNO3, gdzie zachodzi reakcja z wytrąceniem się czarnego osadu Ag2S. Ilość wytrąconej siarki była oznaczana wagowo, a kerogen i siarczek srebra (I) były poddawane badaniom izotopów siarki. Analiza elementarna badanego materiału przed usunięciem i po usunięciu siarki pirytowej oraz obliczenie stosunków atomowych H/C, O/C, N/C, S/C potwierdziły przydatność metody wykazanej w poprzednich badaniach i nie uwidoczniły istotnych zmian w badanym kerogenie. W pracy oddzielono siarkę pirytową od organicznej w kerogenie z wybranych próbek warstw menilitowych z zewnętrznych Karpat fliszowych oraz poddano obie formy tego pierwiastka badaniom izotopowym, a także skorelowano z danymi dotyczącymi innych form występowania siarki w skałach, bituminach i ropach. Co istotne, znaczną część siarki całkowitej w kerogenie stanowi siarka pirytowa, co implikuje konieczność rozdzielenia jej od siarki organicznej w celu sformułowania poprawnych wniosków dotyczących energii aktywacji kerogenu i tempa generacji węglowodorów. Badania izotopowe potwierdzają wcześniejsze interpretacje pochodzenia pirytu z procesu bakteryjnej redukcji siarczanów i euksynicznego środowiska depozycji oligoceńskich osadów w basenie Paratetydy.
Sulphur occurs in nature in a variety of forms: as elemental sulphur, sulphides, sulphates, and organic sulphur compounds (OSC). The work investigated the relationship between the presence of sulphur in crude oil and source rocks. Pyritic and organic sulphur was isolated in kerogen, while OSC and elemental sulphur was isolated in bitumens. The chromium reducible sulphur method (CRS) carried out in an inert nitrogen atmosphere in a glove box was used to separate pyritic sulphur remaining after kerogen isolation. The use of a CrCl2 solution in HCl results in the release of pyritic sulphur in the form of H2S. Hydrogen sulphide is later introduced into the AgNO3 solution, where reaction occurs resulting in precipitation of black Ag2S. The amount of precipitated sulphur was determined by weight, while kerogen remains and silver (I) sulphide underwent sulphur isotope testing. The elemental analysis of the tested material before and after the removal of pyritic sulphur and the calculation of the atomic H/C, O/C, N/C, S/C ratios confirmed the usefulness of the method demonstrated in previous studies and did not show any significant changes in the tested kerogen. In the work, pyritic sulphur was separated from organic sulphur in kerogen from selected samples of Menilite Beds from the Outer Carpathians and subjected to isotope tests, and correlated with data on other forms of sulphur occurrence in rocks, bitumens and crudes. A significant part of the total sulphur in kerogen is pyritic sulphur, which without determining the content of organic sulphur may lead to incorrect assumptions regarding the activation energy of kerogen and the rate of hydrocarbon generation. Isotopic studies confirm earlier interpretations of the origin of pyrite by bacterial reduction of sulphates and the euxinic environment of the deposition of Oligocene sediments in the Paratethys Basin.
Źródło:
Nafta-Gaz; 2023, 79, 6; 371-384
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sedymentologiczna i geochemiczna charakterystyka dolnych warstw krośnieńskich fałdu Gorlic i łuski Stróż (jednostka śląska, Karpaty zewnętrzne)
Sedimentological and geochemical characteristics of the Lower Krosno Beds from the Gorlice fold and the Stróże Thrust Sheet (Silesian Unit, Polish Outer Carpathians)
Autorzy:
Drozd, Arkadiusz
Bieleń, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/1833981.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
fałd Gorlic
łuska Stróż
warstwy krośnieńskie
facje
karotenoidy
arylowe izoprenoidy
izorenieratan
paleorenieratan
fotyczna strefa anoksyczna
Gorlice fold
Stróże Thrust Sheet
Krosno Beds
facies
carotenoids
aryl isoprenoids
isorenieratane
paleorenieratane
photic zone anoxia
Opis:
The main goal of this paper is to present the sedimentological and geochemical character of Krosno Beds from the Gorlice fold and the Stróże Thrust Sheet. Based on field work, two measured sections were made: western Stróże with true thickness of 300 m and eastern Lipinki with true thickness of 227 m. Within them, six sedimentary facies described in the Gorlice profile were identified and three newly recognized facies were distinguished. These facies have been interpreted in the framework of depositional mechanisms. Sedimentary structures were identified and described, including those important for reconstruct the sedimentation environment: hummocky-cross stratification (HCS) and trough cross stratification. Another element of the analysis is compilation of the measured field sections and their correlation with well logs from the Gorlice-12 and L-OU1 wells. The correlation enabled to show similarities of lithological development within the Gorlice fold and differences in relation to the Stróże Thrust Sheet profile. Eight samples of mudstone (Stróże profile 3 samples: S5–S7, Lipinki profile 5 samples: L3–L8) were collected and subjected to geochemical biomarkers analysis. The aim of the biomarkers study was to specify the character of the sedimentation environment and to confirm the biological/bacterial origin of compounds from the aryl isoprenoids group. Fifteen samples of bitumen extracts derived from two sections: Stróże in the Biała riverbed in the western part and Lipinka in the Libuszanka stream bed in the eastern part were selected for sample collection and testing. Aryl isoprenoids (short and medium chain) and higher diaryl isoprenoids have been identified. In addition, higher aromatic C40 carotenoids have been identified such as: isorenieratane, β-paleorenieratane, β-isorenieratane, β-renierapurpurane, chlorobactane and okenane. These are considered as a further evidence of the bacterial origin of aryl isoprenoids. The indices specifying the sedimentation environment were calculated: AIR, and isorenieratan/phenanthrene index. Samples were tested for: the character of the sedimentary environment, including photic zone anoxia (PZA) and its duration, depth of chemocline and bacterial activity during sedimentation. The results of the samples analysis used in this work were compared with the archival results of samples analysis (the Gorlice fold area).
Źródło:
Nafta-Gaz; 2020, 76, 12; 877--894
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spektrometria masowa i analiza izotopowa biomarkerów frakcji nasyconej
Mass spectrometry and isotopes analysis of the saturated fraction biomarkers
Autorzy:
Bieleń, Wojciech
Janiga, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2143598.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
spektrometria masowa
analiza izotopowa
biomarkery
hopany
środowisko sedymentacji materii organicznej
mass spectrometry
isotopes analysis
biomarkers
hopanes
sedimentation environment of organic matter
Opis:
Analiza GC-IRMS poszerza i potwierdza (lub nie) interpretację opartą na wynikach z analiz GC-MS. Przykładowo jest bardzo przydatna w określaniu środowiska sedymentacji materii organicznej. Analiza GC-MS biomarkerów i oparte na niej wyniki są wiary- godne, ale dopiero badania GC-IRMS mogą je potwierdzić. W niniejszej pracy próbowano poprzez analizy izotopowe potwierdzić pochodzenie: BNH (28,30-bisnorhopanu) od bakterii chemoautotroficznych, a także wyższych karotenoidów i ich pochodnych od bakterii Chlorobiaceae czy Chromatiaceae. Przeprowadzono badania biomarkerów na aparacie GC-IRMS oraz EA-IRMS. Otrzymane chromatogramy z analiz IRMS porównywano z archiwalnymi analizami GC-MS dla tych samych próbek w celu identyfikacji poszczególnych związków chemicznych. Oprócz dotychczasowej metodyki przygotowania próbek do analiz zastosowano też niestandardową metodę polegającą na rozdziale n-alkanów od węglowodorów rozgałęzionych. Oznaczono na GC-IRMS powtarzalność metody oraz wartości δ13C wybranych biomarkerów z frakcji nasyconej. Stwierdzono, że próbki z małą zawartością biomarkerów nie nadają się do analiz. Z drugiej strony zbyt duże stężenie analitu podanego na chromatograf gazowy powoduje wzrost linii bazowej i gorszy rozdział pików, co również stanowi problem. Wstępnie oznaczono wartości δ13C dla biomarkerów frakcji nasyconej z grupy hopanów: bisnorhopanu (BNH), oleananu, C29 norhopanu, C30 hopanu, moretanu i serii C31–C35 homohopanów oraz dla surowych rop naftowych. Stwierdzono względnie niewielkie różnice w wartości δ13C pomiędzy BNH a hopanami i BNH a surowymi ropami, co sugeruje najprawdopodobniej to samo źródło pochodzenia wszystkich biomarkerów (w tym BNH). Próbowano również oznaczać biomarkery we frakcji aromatycznej metodą GC-IRMS, co jednak się nie udało. Chcąc w przyszłości przeprowadzać takie oznaczenia, należy najprawdopodobniej zastosować specjalną metodykę przygotowania próbek frakcji aromatycznej.
GC-IRMS analysis extends and confirms (or not) the interpretation based on the results of GC-MS analyses. For example, it is very useful in determining the sedimentation environment of organic matter. GC-MS analysis of biomarkers and the results are reliable, but only GC-IRMS studies can confirm it. In this study, the origin of BNH (28,30-bisnorhopane from chemoautotrophic bacteria) and origin of higher carotenoids and their derivatives from Chlorobiaceae or Chromotiaceae bacteria were confirmed through isotopic analyzes. Biomarkers were analyzed using the GC-IRMS and EA-IRMS apparatus. The obtained chromatograms from the IRMS analyses were compared with the archival GC-MS analyses for the same samples in order to identify individual chemical compounds. In addition to the existing methodology of sample preparation for analyses, a non-standard method was also used, consisting in the separation of n-alkanes from branched hydrocarbons. The repeatability of the method was determined on the GC-IRMS and the values of δ13C for selected biomarkers from the saturated fraction were determined. It was found that samples with low biomarker content are not suitable for analysis. On the other hand, too high concentration of the analyte causes an increase of the chromatogram baseline and worse separation of the peaks, which is also a problem. For the crude oils the δ13C values were initially determined for the biomarkers of the saturated fraction from the hopanes group: bisnorhopane (BNH), oleanane, C29 norhopane, C30 hopane, moretane and the C31-C35 homohopane series. Relatively small differences in δ13C values were found between BNH/hopanes and BNH/crude oils, which suggests the same source of origin for all biomarkers (including BNH). Determining biomarkers in the aromatic fraction using the GC-IRMS method was not successful. In the future, a special methodology for preparing samples for carbon isotopic analyses of aromatic fraction will be required.
Źródło:
Nafta-Gaz; 2021, 77, 8; 512-520
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena możliwości wykorzystania desorpcji termicznej do wyznaczania charakteru nasyceń w profilu odwiertu
Assessment of thermal desorption method application for determination of the saturation characteristics along borehole
Autorzy:
Matyasik, Irena
Zapała, Marek
Kierat, Maria
Kania, Małgorzata
Bieleń, Wojciech
Spunda, Karol
Powiązania:
https://bibliotekanauki.pl/articles/1834974.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
skała macierzysta
desorpcja
węglowodory
Py-GC
piroliza
chromatografia gazowa
dolomit główny
source rock
desorption
hydrocarbons
pyrolysis
gas chromatography
Main Dolomite
Opis:
Celem niniejszej pracy jest przedstawienie szybkiej metody oceny typu wolnych węglowodorów, występujących w profilu otworu, wykorzystującej jako narzędzie pirolizę połączoną z chromatografią gazową (Py-GC). Metoda ta, jako alternatywa dla dotychczas stosowanych – pirolizy Rock-Eval i ekstrakcji rozpuszczalnikowej, mogłaby służyć do typowania poziomów do bardziej szczegółowych badań. W tym celu wykonano badania porównawcze rdzeni pochodzących ze strefy akumulacji ropy naftowej w utworach dolomitu głównego na Niżu Polskim. Wyniki eksperymentów Py-GC prowadzonych w 350°C z detekcją desorbowanych związków na detektorze płomieniowo-jonizacyjnym (Py-GC/FID) dowiodły pozytywnej korelacji z ilością wolnych węglowodorów (S1) uwalnianych w 300°C podczas pirolizy Rock-Eval oraz zawartością ekstrahowalnej substancji organicznej (ESO). Metoda Py-GC/FID ma jednak tę przewagę nad pozostałymi dwiema metodami, że otrzymany chromatogram pokazuje dystrybucję desorbowanych węglowodorów i umożliwia obliczenie niektórych wskaźników geochemicznych, co pozwala na wstępną charakterystykę akumulacji. Ocenę przydatności metody w aspekcie charakterystyki uwalnianych produktów przeprowadzono, wykonując dla kilku badanych rdzeni analizy chromatograficzne GC-FID frakcji nasyconej ekstraktu bitumicznego i obliczając na ich podstawie wskaźniki geochemiczne. Wyniki porównania wykazały generalnie podobieństwo dystrybucji węglowodorów, a dla niektórych próbek również zgodność obliczonych wskaźników. Na tej podstawie należy uznać, że dystrybucja produktów desorpcji Py-GC/FID skał w 350°C pozwala na uzyskanie części informacji dostarczanych przez analizę chromatograficzną GC-FID frakcji nasyconej ekstraktu bitumicznego bez konieczności wstępnej preparatyki chemicznej materiału rdzeniowego, co znacznie skraca czas i obniża koszty analizy. Dystrybucja desorbowanych węglowodorów w korelacji z wynikami pirolizy Rock-Eval może stanowić narzędzie typowania poziomów do szczegółowej charakterystyki geochemicznej. Procedura poszerza zakres badań geochemicznych o kolejną metodę wnoszącą wkład do rozpoznania basenów naftowych.
The purpose of this work was to present a quick method for assessing the type of free hydrocarbons occurring in the borehole profile, using pyrolysis combined with gas chromatography (Py-GC) as a tool. This method, as an alternative for the previously used – Rock Eval pyrolysis and solvent extraction – could be used to select levels for more detailed research. For this purpose, comparative tests were carried out of cores originating from the oil accumulation zone in the Main Dolomite formations in the Polish Lowlands. The results of Py-GC experiments carried out at 350ºC with the detection of desorbed compounds on the flame ionization detector (Py-GC/FID) showed a positive correlation with the amount of free hydrocarbons (S1) released at 300ºC during Rock-Eval pyrolysis and the content of extractable organic substance (ESO). However, the Py-GC/FID method has the advantage over the other two methods in that the resulting chromatogram shows the distribution of desorbed hydrocarbons and makes it possible to calculate some geochemical indicators, allowing the preliminary characterization of accumulation. The assessment of the method’s usefulness in terms of the characteristics of released products was carried out by performing GC-FID chromatographic analyses of the saturated fraction of bituminous extract for several tested cores and calculating the geochemical indices on their basis. The results of the comparison generally demonstrated a similarity of hydrocarbon distribution, and for some samples also compliance with the calculated indices. On this basis, it should be considered that the distribution of Py-GC/FID desorption products of rocks at 350ºC allows obtaining part of the information provided by GC-FID chromatographic analysis of the saturated fraction of the bituminous extract without the need for chemical pre-treatment of the core material, which significantly reduces the time and costs of analysis. The distribution of desorbed hydrocarbons in correlation with the results of Rock Eval pyrolysis can be a tool for selecting levels for detailed geochemical recognition. The procedure extends the scope of geochemical research with another method contributing to the recognition of oil basins.
Źródło:
Nafta-Gaz; 2019, 75, 12; 731-742
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie skompilowanych badań termicznych w charakterystyce skał macierzystych na przykładzie warstw menilitowych
The use of compiled thermal methods in the characteristics of source rocks on the example of menilite beds
Autorzy:
Labus, Małgorzata
Kierat, Maria
Matyasik, Irena
Spunda, Karol
Kania, Małgorzata
Janiga, Marek
Bieleń, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/1834987.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
analiza termiczna
termograwimetria
piroliza
warstwy menilitowe
potencjał generacyjny
thermal analysis
thermogravimetric
pyrolysis
Menilite Beds
generation potential
Opis:
Celem badań było porównanie wyników termicznego rozkładu materii organicznej przy zastosowaniu różnych metod badawczych. Eksperymenty wykonano dla oceny metod interpretacyjnych w charakterystyce potencjału generacyjnego skał macierzystych. Badania przeprowadzono dla próbek łupków menilitowych, uznanych na podstawie wieloletnich badań geochemicznych za dobrej jakości skały macierzyste. Próbki reprezentowały warstwy menilitowe jednostki śląskiej, pobrane z karpackich odsłonięć powierzchniowych. Badania przy zastosowaniu znanych metod: pirolizy Rock-Eval (RE), metody termograwimetrycznej i kalorymetrycznej (TG/DSC) oraz metody pirolizy połączonej z analizą chromatografii gazowej (PY-GC), były wykonywane na tych samych próbkach – zarówno na próbkach skalnych, jak i na wyizolowanym kerogenie. Takie zintegrowane badania nie były dotychczas prowadzone na żadnym materiale skalnym. Zastosowane metody badawcze wykazały znaczną porównywalność otrzymanych wyników. Znaleziono szereg korelacji pomiędzy parametrami z poszczególnych metod, między innymi: ilości węglowodorów wydzielonych podczas PY-GC w przedziale temperatur 300–650°C, a parametrem S2 z RE oraz ubytkiem masy w analizie TG w tym samym przedziale temperatur; wartości S2 próbek skalnych oraz kerogenu z ubytkiem masy w efekcie pirolizy z analizy TG/DSC w temperaturach z zakresu 300–650°C; wartości temperatury maksimum piku S2 (Tpk2) próbek skalnych z temperaturą maksymalnego ubytku masy podczas analizy TG; zawartości węgla rezydualnego (RC) z analizy RE próbek skały i kerogenu z ubytkiem masy w efekcie spalania rezydualnej materii organicznej z analizy TG/DSC w temperaturach z zakresu 650– 1050°C. Ubytek masy, oznaczony podczas analizy termograwimetrycznej, zestawiony z procentowym udziałem poszczególnych frakcji węglowodorowych, w których znaczący udział mają frakcje C9+ potwierdza ropotwórczy charakter substancji organicznej zawartej w warstwach menilitowych. Badania porównawcze metod pirolitycznych: Rock Eval, TG/DSC oraz PY-GC dowiodły kompatybilności wyników uzyskanych wszystkimi metodami. Każda z metod ponadto umożliwia pozyskanie wzajemnie uzupełniających się informacji odnośnie zawartości TOC, stopnia dojrzałości termicznej, jak i typu generowanych węglowodorów oraz innych niewęglowodorowych związków. Przeprowadzone testy oraz wykonane korelacje pokazały celowość stosowania zespołu metod termicznych dla pozyskania kompletnych informacji dotyczących skał macierzystych.
The aim of the research was to compare the results of the thermal decomposition of organic matter using different research methods. Experiments were carried out to assess interpretation methods in the characterization of the generation potential of source rocks. The research was conducted for samples of Menilite shales, recognized on the basis of long-term geochemical studies as good quality source rocks. The samples represented the Menilite Beds of the Silesian Unit, taken from the outcrops in the Carpathians. Research using known methods: Rock-Eval pyrolysis (RE), thermogravimetric and calorimetric methods (TG/DSC), and pyrolysis methods combined with gas chromatography analysis (PY-GC), were performed on the same samples- both on rock samples, as well as isolated kerogen. Such integrated studies have so far not been conducted on any rock material. The applied research methods showed a significant comparability of the results obtained. A number of correlations were found between the parameters from individual methods, including: the amount of hydrocarbons separated during PY-GC in the temperature range of 300–650°C, and the parameter S2 from RE, and mass loss in the TG analysis in the same temperature range; S2 values of rock samples and kerogen with weight loss as a result of pyrolysis from TG/DSC analysis at temperatures in the range of 300–650°C; temperature values of the maximum peak S2 (Tpk2) of rock samples with the maximum mass loss temperature during TG analysis; residual carbon content (RC) from RE analysis of rock and kerogen samples with a mass loss as a result of burning residual organic matter from TG/DSC analysis at temperatures in the range of 650–1050°C. The mass loss determined during thermogravimetric analysis, combined with the percentage share of individual hydrocarbon fractions, in which the C9+ fraction is significant, confirms the high petroleum potential of the organic substance contained in the Menilite Beds. Comparative studies of pyrolytic methods: Rock Eval, TG/DSC and PY-GC have proved the compatibility of the results obtained with all methods. Each of the methods also makes it possible to obtain mutually complementary information relating to the TOC, the degree of thermal maturity and type of generated hydrocarbons and other non-hydrocarbon compounds. The conducted tests and performed correlations showed the usefulness of a set of thermal methods to obtain complete information on source rocks.
Źródło:
Nafta-Gaz; 2019, 75, 2; 67-76
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies