Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Fourier transform" wg kryterium: Temat


Tytuł:
3D Synthetic Aperture Imaging Method in Spectrum Domain for Low-Cost Portable Ultrasound Systems
Autorzy:
Tasinkiewicz, Jurij
Powiązania:
https://bibliotekanauki.pl/articles/31339771.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
ultrasound imaging
matrix transducer
delay-and-sum
Fourier transform
synthetic aperture
Opis:
Portable, hand-held ultrasound devices capable of 3D imaging in real time are the next generation of the medical imaging apparatus adapted not only for professional medical stuff but for a wide group of less advanced users. Limited power supply capacity and the relatively small number of channels used for the ultrasound data acquisition are the most important limitations that should be taken into account when designing such devices and when developing the corresponding image reconstruction algorithms. The aim of this study was to develop a new 3D ultrasound imaging method which would take into account the above-mentioned features of the new generation of ultrasonic devices – low-cost portable general access scanners. It was based on the synthetic transmit aperture (STA) method combined with the Fourier spectrum domain (SD) acoustic data processing. The STA using a limited number of elements in transmit and receive modes for ultrasound data acquisition allowed both aforementioned constraints to be obeyed simultaneously. Moreover, the computational speed of the fast Fourier transform (FFT) algorithm utilized for the ultrasound image synthesis in the spectrum domain makes the proposed method to be more competitive compared to the conventional time domain (TD) STA method based on the delay-and-sum (DAS) technique, especially in the case of 3D imaging in real time mode. Performance of the proposed method was verified using numerical 3D acoustic data simulated in the Field II program for MATLAB and using experimental data from the custom design 3D scattering phantom collected by means of the Verasonics Vantage 256™ research ultrasound system equipped with the dedicated 1024-element 2D matrix transducer. The method proposed in this paper was about 80 times faster than its counterpart based on the time domain synthetic transmit aperture (TD-STA) approach in the numerical example of a single 3D ultrasound image synthesized from 4 partial images each containing 64 × 64 × 512 pixels. It was also shown that the acceleration of the image reconstruction was achieved at the cost of a slight deterioration in the image quality assessed by the contrast and contrast-to-noise ratio (CNR).
Źródło:
Archives of Acoustics; 2023, 48, 4; 559-572
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A base-two fast Fourier transform algorithm
Algorytm szybkiej transformacji Fouriera w bazie dwójkowej
Autorzy:
Hien, T. D.
Powiązania:
https://bibliotekanauki.pl/articles/158232.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
transformacja Fouriera
sterowanie
dynamika
multimedia
Fourier transform
control
dynamics
Opis:
The paper deals with a numerical procedure for the well-known in engineering Fourier transform pairs. Computational aspects of the discretization of continuous time and frequency signals are specifically discussed. An extremely efficient algorithm for the direct and inverse Fourier transforms of complex valued sequences of length equal to a power two is worked out and can readily be implemented in existing computer codes.
W pracy przedstawiono numeryczną procedurę dla znanych w technice par transformacji Fouriera. Przedyskutowano aspekty komputerowe dyskretyzacji ciągłych sygnałów czasowych i częstotliwościowych. Opracowano wyjątkowo skuteczny algorytm dla bezpośredniej i odwrotnej transformacji Fouriera ciągów liczb zespolonych o długościach równych potędze dwóch. Algorytm może być zaimplementowany bezpośrednio w istniejących pakietach komputerowych.
Źródło:
Pomiary Automatyka Kontrola; 2008, R. 54, nr 7, 7; 413-416
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Comparative Analysis of Evolutionary Algorithms for Synthesis of Scanned Linear Array of Mutually Coupled Parallel Dipole Antennas
Autorzy:
Patidar, H.
Mahanti, G. K.
Muralidharan, R.
Powiązania:
https://bibliotekanauki.pl/articles/227212.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
antenna array
comparative analysis
evolutionary algorithms
inverse fast Fourier transform
scanning
Opis:
This paper presents a comparative analysis of three evolutionary algorithms, namely, Backtracking Search Algorithm, Cuckoo Search Algorithm and Artificial Bee Colony Algorithms for synthesis of a scanned linear array of uniformly spaced parallel half wavelength dipole antennas. Here, antenna parameters, namely Side Lobe Level, reflection coefficient and wide null depth are taken into consideration for comparison between algorithms. In addition to it, statistical parameters, namely best fitness value, mean and standard deviation of the fitness values obtained from algorithms are compared. Mutual coupling that exists among the antenna elements is included in obtaining radiation patterns and the self-impedances along with the mutual impedances are calculated by induced Electro-Motive Force method. Two different examples are shown in this paper to validate the effectiveness of the utilized approach. Although, this approach is applied to a linear array of dipole antennas; this can be utilized for other array geometries as well.
Źródło:
International Journal of Electronics and Telecommunications; 2017, 63, 2; 151-157
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A comparison of methods for obtaining nanocellulose using acid and ionic liquid hydrolysis reactions
Autorzy:
Babicka, Marta
Ratajczak, Izabela
Dwiecki, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/24072146.pdf
Data publikacji:
2019
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
1-butyl-3-methylimidazolium chloride
sulphuric acid(VI)
acid hydrolysis
ionic liquid hydrolysis
dynamic light scattering
fourier transform infrared spectroscopy
Opis:
A comparison of methods for obtaining nanocellulose using acid and ionic liquid hydrolysis reactions. In this study, two methods were compared, i.e. acid hydrolysis using sulphuric acid (VI) and ionic liquid hydrolysis using 1-methyl-3-butylimidazolium chloride to obtain nanocellulose from Sigmacell Cellulose Type 20. The efficiency of both processes was tested for weight loss of the material during the reaction. The study showed that much more material can be obtained using ionic liquid hydrolysis than using acid hydrolysis. A dynamic light scattering study was performed to determine material particle size before and after these processes. Particles of nanometric size were recorded only for cellulose after the reaction with an ionic liquid. In addition, Fourier transform infrared spectroscopy was performed to determine the chemical structure of the materials tested.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2019, 107; 19--23
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A method for probing the refractive index change in photorefractive crystals
Autorzy:
Fu, M.
Gao, C.
Wang, X.
Cui, Y.
Dai, S
Powiązania:
https://bibliotekanauki.pl/articles/174913.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Fourier transform profilometry
refractive index change
photorefractive effect
Opis:
A method for probing refractive index changes in photorefractive crystals using an interferometric technique and digital image processing was proposed. Based on equal thickness interference in LiNbO3 crystal and Fourier transform profilometry, we obtained phase value changes in interferograms induced by a photorefractive effect, and further calculated refractive index changes. The maximal values for extraordinary light (e-light) and ordinary light (o-light) are 6.6×10–4 and 1.2×10–4, respectively.
Źródło:
Optica Applicata; 2013, 43, 4; 731-737
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A New Approach to Spindle Radial Error Evaluation Using a Machine Vision System
Autorzy:
Kavitha, C.
Ashok, S. D.
Powiązania:
https://bibliotekanauki.pl/articles/220748.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
machine vision
circular hough transform
Fourier series
runout
spindle radial error
Opis:
The spindle rotational accuracy is one of the important issues in a machine tool which affects the surface topography and dimensional accuracy of a workpiece. This paper presents a machine-vision-based approach to radial error measurement of a lathe spindle using a CMOS camera and a PC-based image processing system. In the present work, a precisely machined cylindrical master is mounted on the spindle as a datum surface and variations of its position are captured using the camera for evaluating runout of the spindle. The Circular Hough Transform (CHT) is used to detect variations of the centre position of the master cylinder during spindle rotation at subpixel level from a sequence of images. Radial error values of the spindle are evaluated using the Fourier series analysis of the centre position of the master cylinder calculated with the least squares curve fitting technique. The experiments have been carried out on a lathe at different operating speeds and the spindle radial error estimation results are presented. The proposed method provides a simpler approach to on-machine estimation of the spindle radial error in machine tools.
Źródło:
Metrology and Measurement Systems; 2017, 24, 1; 201-219
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A radial version of the Kontorovich-Lebedev transform in the unit ball
Autorzy:
Yakubovich, S. B.
Vieira, N.
Powiązania:
https://bibliotekanauki.pl/articles/255671.pdf
Data publikacji:
2011
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
Kontorovich-Lebedev transform
modified Bessel function
index transforms
Fourier integrals
Opis:
In this paper we introduce a radial version of the Kontorovich-Lebedev transform in the unit ball. Mapping properties and an inversion formula are proved in Lp.
Źródło:
Opuscula Mathematica; 2011, 31, 1; 137-146
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustic processor of the MCM sonar
Procesor akustyczny sonaru MCM
Autorzy:
Rudnicki, M.
Schmidt, J.
Schmidt, A.
Leśniak, W.
Powiązania:
https://bibliotekanauki.pl/articles/282134.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
MCM sonar
second order sampling
digital phase beamformer
Fourier transform
spatial frequency
VME bus
sonar MCM
próbkowanie drugiego rządu
cyfrowy beamformer fazowy
przekształcenie Fouriera
częstotliwość przestrzenna
VMEBus
Opis:
This paper presents the concept of an acoustic processor of the mine countermeasure sonar. Developed at the Department of Marine Electronics Systems, Gdańsk University of Technology, the acoustic processor is an element of the MG-89, a modernised underwater acoustic station. The focus of the article is on the modules of the processor. They are responsible for sampling analogue signals and implementing the algorithms controlling the measurement cycle and digital signal processing. As it performs the above funetions, the device should be highly reliable and resistant to mechanical and weather conditions and ensure a user friendly operation. The functions of the processor software should help with object detection and classification. In addition to these properties, the acoustic processor should operate in real time. The results of measurements should be displayed with the shortest possible delay in relation to sounding signals to allow the operator to take decisions ąuickly and establish if the object poses a risk.
W artykule przedstawiono koncepcję procesora akustycznego sonaru MCM (ang. Mine Countermeasure Sonar), opracowaną i zrealizowaną w Katedrze Systemów Elektroniki Morskiej Politechniki Gdańskiej. Opisany procesor akustyczny jest elementem zmodernizowanej stacji hydrolokacyjnej MG-89. Zwrócono szczególną uwagę na moduły procesora, które odpowiadają za proces próbkowania sygnałów analogowych oraz realizują algorytmy sterowania cyklem pomiarowym i cyfrowego przetwarzania sygnałów. Urządzenie to przy wykonywaniu wyżej wymienionych funkcji powinno cechować się dużą niezawodnością oraz odpornością na narażenia mechaniczne i klimatyczne, a z punktu widzenia operatora - łatwością obsługi. Oprogramowanie procesora powinno zawierać funkcje ułatwiające detekcję i klasyfikację wykrytych obiektów. Poza wymienionymi właściwościami procesor akustyczny powinien również być systemem czasu rzeczywistego. Wyniki pomiarów powinny pojawiać się na zobrazowaniu z możliwie najmniejszym opóźnieniem, w stosunku do sygnałów sondujących, tak aby operator systemu mógł, w jak najkrótszym czasie, podjąć decyzję, czy wykryty obiekt jest niebezpieczny.
Źródło:
Automatyka / Automatics; 2013, 17, 1; 73-82
1429-3447
2353-0952
Pojawia się w:
Automatyka / Automatics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustical Analysis of Enclosure as Initial Approach to Vehicle Induced Noise Analysis Comparatevely Using STFT and Wavelets
Autorzy:
Błażejewski, A.
Kozioł, P.
Łuczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/176551.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
modal analysis
short-time Fourier transform
wavelet transform
acoustic signal processing
Opis:
It is assumed in the paper that the signals in the enclosure in a transient period are similar to a noise induced by vehicles, tracks, cars, etc. passing by. The components of such signals usually points out specific dynamic processes running during the observation or measurements. In order to choose the best method of analysis of these phenomena, an acoustic field in a closed space with a sound source inside is created. Acoustic modes of this space influence the sound field. Analytically, the modal analyses describe the above mentioned phenomena. The experimental measurements were conducted in the room that might comprise the closed space with known boundary conditions and the sound source Br¨uel & Kjær Omni-directional type 4292 inside. To record sound signals before the field’s steady state was reached, the microphone type 4349 and the 4-channel frontend 3590 had been used. The obtained signals have been analysed by using two approaches, i.e. Fourier and the wavelet analysis, with the emphasis on their efficiency and the capability to recognise important details of the signal. The results obtained for the enclosure might lead to the formulation of a methodology for an extended investigation of a rail track or vehicles dynamics.
Źródło:
Archives of Acoustics; 2014, 39, 3; 385-394
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Active Cancellation of the Tonal Component of Sound Using a Discrete Fourier Transform of Variable Length
Autorzy:
Łuczyński, Michał
Dobrucki, Andrzej
Brachmański, Stefan
Powiązania:
https://bibliotekanauki.pl/articles/2097702.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
active noise control
tonal signal
Discrete Fourier Transform
Opis:
The paper presents a method of eliminating the tonal component of an acoustic signal. The tonal component is approximated by a sinusoidal signal of a given amplitude and frequency. As the parameters of this component: amplitude, frequency and initial phase may be variable, it is important to detect these parameters in subsequent analysis time intervals (frames). If the detection of the parameters is correct, the elimination consists in adding a sinusoidal component with the detected amplitude and frequency to the signal, but the phase shifted by 180 degrees. The accuracy of the reduction depends on the accuracy of parameters detection and their changes. Detection takes place using the Discrete Fourier Transform, whose length is changed to match the spectrum resolution to the signal frequency. The operation for various methods of synthesis of the compensating signal as well as various window functions were checked. An elimination simulation was performed to analyze the effectiveness of the reduction. The result of the paper is the assessment of the method in narrowband active noise control systems. The method was tested by simulation and then experimentally with real acoustic signals. The level of reduction was from 6.9 to 31.5 dB.
Źródło:
Archives of Acoustics; 2021, 46, 4; 579-589
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Amplitude demodulation of interferometric signals with a 2D Hilbert transform
Autorzy:
Wielgus, M.
Powiązania:
https://bibliotekanauki.pl/articles/115674.pdf
Data publikacji:
2011
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
Hilbert transform
image analysis
Fourier transform
demodulation
Opis:
The Hilbert transform and the analytic signal are widely known tools of 1D signal pro cessing. They are useful for many applications, such as AM-FM demodulation or edge detection. Developing the multidimensional generalization of this method is particularly important for the purposes of image processing. Unfortunately, it is not obvious how to generalize the transform, keeping its essential properties. In this paper I survey some ideas: basic approaches with spectral masks imitating 1D signum function, the spiral phase operator method and the method involving quaternionic Fourier transform. I present and compare how these algorithms are useful for the amplitude demodulation of typical interferometric images.
Źródło:
Challenges of Modern Technology; 2011, 2, 1; 8-11
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Application of the Fourier Transform to Optimization of Continuous 2-D Systems
Autorzy:
Dymkou, V.
Dymkov, M.
Powiązania:
https://bibliotekanauki.pl/articles/908254.pdf
Data publikacji:
2003
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
informatyka
2D systems
optimization
entire functions
Fourier transform
approximation
Opis:
This paper uses the theory of entire functions to study the linear quadratic optimization problem for a class of continuous 2D systems. We show that in some cases optimal control can be given by an analytical formula. A simple method is also proposed to find an approximate solution with preassigned accuracy. Some application to the 1D optimization problem is presented, too. The obtained results form a theoretical background for the design problem of optimal controllers for relevant processes.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2003, 13, 1; 45-54
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza i archiwizacja pomiarów analogowych z wykorzystaniem cyfrowych rejestratorów ADLINK
Analysis and archiving of analog measurements using ADLINK loggers
Autorzy:
TWARÓG, Bogusław
GOMÓŁKA, Zbigniew
ŻESŁAWSKA, Ewa
Powiązania:
https://bibliotekanauki.pl/articles/1389078.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Rzeszowski
Tematy:
przetwarzanie analogowo-cyfrowe akwizycja danych
szybka transformata Fouriera
analog digital processing
data acquisition
Fast Fourier Transform
Opis:
W artykule przedstawiono koncepcję wykorzystania cyfrowego rejestratora USB 1901 AD-LINK do akwizycji pomiarów i analizy danych analogowych. Przygotowano specjalne skrypty pozwalające analizować badane sygnały z dodatkowym wykorzystaniem algorytmu szybkiej transformaty Fouriera.
The paper presents the concepts of using a digital logger ADLINK USB 1901 to acquisition and analysis of analog data. There are special scripts that allow to analyze test signals using the Fast Fourier Transform algorithm.
Źródło:
Edukacja-Technika-Informatyka; 2016, 7, 4; 437-443
2080-9069
Pojawia się w:
Edukacja-Technika-Informatyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza IR biogazu pochodzącego z przeróbki odpadów gorzelnianych
IR analysis of biogas from the processing of distillers waste
Autorzy:
Wieczorek, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/31348140.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
spektrometria w podczerwieni z transformacją Fouriera (FT-IR)
kuweta gazowa
IR
biogaz
Fourier transform infrared spectrometry (FT-IR)
gas cell
biogas
Opis:
Technika spektrometrii w podczerwieni (IR) stosowana jest do identyfikacji substancji organicznych, polimerowych i w niektórych przypadkach materiałów nieorganicznych. Zgodnie z tezą, że era paliw kopalnych powoli zbliża się do końca, zaistniała konieczność szukania i testowania alternatywnych źródeł energii. Gaz ziemny zawierający metan stanowi źródło energii wytwarzające duże ilości gazów cieplarnianych. Magazynowanie i wytwarzanie energii z paliw takich jak biogaz stanowi jedno z wielu innowacyjnych podejść podczas produkcji w zamkniętych, neutralnych pod względem CO2 obiegach (biogazownie). Technologie służące do wytwarzania biogazu i wykorzystujące biogaz kwalifikują się do otrzymania dofinansowania wspierającego rozwój OZE. Biogaz jest uważany za odnawialne źródło energii, obieg węgla w cyklu produkcji jego surowców i zużycia jest zamknięty i nie wiąże się z emisją netto dwutlenku węgla. Spektrometry IR pracujące zarówno w zakresie średniej, jak i bliskiej podczerwieni dają możliwości analizy chemicznej i materiałowej z dużą czułością i dokładnością, przez co mogą być szeroko stosowane w monitorowaniu środowiska lub do kontrolowania prowadzonych procesów technologicznych. W artykule opisano analizę próbek biogazu za pomocą spektrometrii w podczerwieni z transformacją Fouriera z zastosowaniem kuwety gazowej o regulowanej drodze optycznej. Badane próbki pochodzą z przerobu odpadów gorzelnianych. Przedstawiono analizę próbek gazów wzorcowych będących głównymi składnikami biogazu oraz dokonano porównania otrzymanych widm IR z widmami rzeczywistych próbek biogazu. Podjęto próbę określenia możliwości użycia tej techniki do wykrywania zanieczyszczeń, takich jak obecność gazowego amoniaku. Przeprowadzone badania potwierdziły możliwości analityczne badania głównych składników biogazu. Zawartość substancji będących zanieczyszczeniami biogazu może okazać się za niska do ich oznaczenia w przypadku ich śladowych ilości, wtedy spektrometria IR może okazać się niewystarczająca m.in. do oceny skuteczności prowadzonych procesów oczyszczania biogazu, dlatego należy ją stosować w połączeniu z analizą GC.
The infrared (IR) spectrometry technique is used to identify organic substances, polymers and, in some cases, inorganic materials. In line with the thesis that the era of fossil fuels is slowly coming to an end, there has been a need to search for and test alternative energy sources. Natural gas containing methane is an energy source that produces large amounts of greenhouse gases. Storing and producing energy from fuels such as biogas is one of the many innovative production approaches in closed, CO2-neutral circuits (biogas plants). Technologies for the production and use of biogas are eligible for funding supporting the development of renewable energy sources. Biogas is considered to be a renewable energy source, the carbon cycle in its raw material production and consumption is closed, with zero net carbon emissions. IR spectrometers operating both in the mid-infrared and near-infrared range provide the possibility of chemical and material analysis with high sensitivity and accuracy, therefore they can be widely used in environmental monitoring or to control technological processes. The article describes the analysis of biogas samples by Fourier transform infrared spectrometry with the use of a gas cuvette with adjustable optical path. The tested samples come from the processing of distiller's waste. The paper presents the analysis of standard gas samples, which are the main components of biogas, and compares the obtained IR spectra with the spectra for real biogas samples. An attempt was made to determine the applicability of this technique for the detection of contaminants such as the presence of ammonia gas. The conducted research confirmed the analytical possibilities of examining the main components of biogas. The content of biogas pollutants may turn out to be too low for their determination in the case of trace amounts, and in such a case the IR spectrometry may turn out to be insufficient, e.g. to assess the effectiveness of biogas purification processes, therefore it should be used in conjunction with the GC analysis.
Źródło:
Nafta-Gaz; 2022, 78, 8; 630-636
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza metod pomiarów zaburzeń przewodzonych EMC z wykorzystaniem pakietu Mathematica
Analysis of EMC measuring methods for conducted interference with use of Mathematica package
Autorzy:
Duzinkiewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/157946.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiary w dziedzinie czasu i częstotliwości
EMC
zaburzenia przewodzone
transformata Fouriera
okno czasowe
measurements in time and frequency domain
conducted interferences
Fourier transform
time window
Opis:
W artykule przedstawiono pozanormatywne metody pomiarów zaburzeń przewodzonych EMC na przykładzie zasilacza impulsowego AC/DC. Wykonano analizę porównawczą znormalizowanych pomiarów kompatybilności elektromagnetycznej zaburzeń przewodzonych wykonywanych specjalizowanym odbiornikiem pomiarowym EMC z badaniami pozanormatywnymi wykonanymi w dziedzinie czasu za pomocą oscyloskopu cyfrowego. Do obliczeń numerycznych i wizualizacji wyników pomiarów wykorzystano pakiet Wolfram Mathematica 8. Przeprowadzona analiza wykazała porównywalne wyniki pomiarów obu metod.
This paper presents the comparative analysis of measurements of conducted interferences taken with an EMI test receiver [5] (Fig. 1) according to norm [4] (PN-EN 55014) and non-normative measurements made by means of a digital oscilloscope (Fig. 2) in time domain. The investigations were carried out on an AC/DC supplying converter, commonly used in a low power chip TNY266 [6] (Fig. 4). Section 2 describes the measurement tests performed with the digital oscilloscope. Section 3 presents analytical transformations of signals from the time domain (Fig. 5) into the frequency domain (Fig. 6). Section 4 deals with a mathematical model of transforming [8] the sinusoidal signal with a third harmonic (Fig. 7) to the form of the frequency spectrum by means of a time window (Fig. 9). Use of time windows in real signal transformations is shown in Section 5 (Fig. 10). The signal frequency spectrum in electromagnetic compatibility research [1, 2] determines one of the most important ways of describing the level of disturbances emitted by electric and electronic equipment. Therefore the analysis results are shown on the same diagram (Fig. 11) in the frequency domain: the signal frequency spectrum of interferences measured with the EMI test receiver as well as the signal frequency spectrum obtained analytically. Numerical calculations and visualization of the measurement results were made with Wolfram Mathematic 8 packet. The analysis results show that there are slight differences between those two methods.
Źródło:
Pomiary Automatyka Kontrola; 2012, R. 58, nr 9, 9; 801-804
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies