Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Rutkowski, Adam" wg kryterium: Autor


Wyświetlanie 1-10 z 10
Tytuł:
Single parallel stubs as broadband microwave phase shifters
Autorzy:
Rutkowski, Adam
Powiązania:
https://bibliotekanauki.pl/articles/220484.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
phase shift
differential phase shift
microwave phase shifter
parallel stub
instantaneous frequency measurement
IFM
Opis:
Structures and characteristics of wideband small-size phase shifters made with the use of single parallel stubs are presented in this paper. The stubs can be short-circuited or open-circuited on termination. Such devices are well known, but are primarily used as components of filters or matching circuits. The novelty, then, comes from the establishment of simple, but helpful formulae, which enable to describe the insertion phase shift and differential phase shift of a line with short and open stubs connected in parallel. These equations can be very useful for designing complex microwave multi-ports. The results of simulations and measurements of the devices, which were designed and made, are shown herein. It was also proved that the presented device shave several usable operating frequency sub-bands, and that the differential phase shift values in the higher sub-bands are greater than those in the lower operating frequency ranges. Thanks to this, the described phase shifters can be used in more than one frequency sub-band. It was stated that in the conditions under analysis, larger phase shifts can be achieved using open-circuited stubs rather than short-circuited stubs. However, the phase shifters with shorted parallel stubs can operate in a wider frequency band.
Źródło:
Metrology and Measurement Systems; 2020, 27, 1; 91-102
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Początki dominikanów płockich na tle polityki Konrada I Mazowieckiego
Autorzy:
Rutkowski, Adam
Powiązania:
https://bibliotekanauki.pl/articles/972423.pdf
Data publikacji:
1970
Wydawca:
Towarzystwo Naukowe Płockie
Źródło:
Notatki Płockie. Kwartalnik Towarzystwa Naukowego Płockiego; 1970, 15, 3 (57); 22-29
0029-389X
Pojawia się w:
Notatki Płockie. Kwartalnik Towarzystwa Naukowego Płockiego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concept of Short-Range Radar and Counter-Projectile for Detecting and Countering Armour-Piercing Projectiles
Koncepcja radaru bliskiego zasięgu oraz antypocisku do wykrywania i zwalczania pocisków przeciwpancernych
Autorzy:
Rutkowski, Adam
Kawalec, Adam
Jarzemski, Józef
Powiązania:
https://bibliotekanauki.pl/articles/1837986.pdf
Data publikacji:
2021
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
electronics
armour-piercing projectile
counter-projectile
radar
elektronika
pocisk przeciwpancerny
antypocisk
Opis:
During warfare and acts of terrorism an extreme threat to vehicles and other high-value assets comes from armour-piercing projectiles. Under these conditions, defence systems should include devices capable of rapid detection of these threats. Defence assets should also be provided with counter-projectile systems capable of destroying incoming armour-piercing projectiles at a safe distance from the asset to be protected. This paper describes the concept of a system comprising of a lightweight short-range radar and a counter-projectile for countering armour-piercing projectiles. The purpose of the radar is to monitor the environment and search for incoming armour-piercing projectiles. When an armour-piercing projectile is detected in a designated monitoring area, an automatic command is given for the counter-projectile launcher to be fired. The counter-projectile deployed can be equipped with a single or multi-sensor detection head unit and an explosive payload module, both being the primary components of the warhead. When the signal analysis blocks interfaced with the detection head determine that the armour-piercing projectile to be struck down is in the target position in relation to the counter-projectile deployed, they automatically command the explosive payload module to detonate. The components of the system concept were tested in proving ground conditions. The successful results of these tests confirmed the validity of the solutions initially adopted and the execution of the individual systems.
W działaniach bojowych oraz podczas aktów terrorystycznych bardzo dużym zagrożeniem dla pojazdów i innych ważnych obiektów są ataki przy użyciu pocisków przeciwpancernych. W takich warunkach systemy obrony powinny dysponować, między innymi, urządzeniami zdolnymi do szybkiego wykrycia zbliżającego się zagrożenia. Systemy obrony powinny być wyposażone również w antypociski mogące zniszczyć nadlatujący pocisk przeciwpancerny w bezpiecznej odległości od chronionego obiektu. W pracy opisano koncepcję zestawu składającego się z lekkiego radaru bliskiego zasięgu oraz antypocisku do zwalczania pocisków przeciwpancernych. Zadaniem radaru jest obserwacja przestrzeni i poszukiwanie atakujących pocisków przeciwpancernych. Gdy wykryty pocisk przeciwpancerny znajdzie się w przewidzianej strefie wówczas automatycznie zostaje wydana komenda do odpalenia antypocisku. Wystrzelony antypocisk może być wyposażony, między innymi, w jedno- lub wielo-sensorową głowicę detekcyjną oraz moduł wybuchowy będące głównymi elementami głowicy bojowej. W chwili, gdy bloki analizy sygnałów współpracujące z głowicą detekcyjną stwierdzą, iż zwalczany pocisk przeciwpancerny znalazł się w zakładanym położeniu względem antypocisku, wówczas automatycznie wydają komendę do detonacji modułu wybuchowego. Elementy koncepcji zestawu zostały zbadane w warunkach poligonowych. Pomyślne wyniki tych badań potwierdziły poprawność wstępnie przyjętych rozwiązań oraz wykonania poszczególnych układów.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2021, 12, 2 (44); 55-62
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niekonkurencyjne wybory, brakujący kandydaci. Dlaczego niektóre komitety wyborcze nie wystawiają kandydatów na burmistrzów?
Uncontested elections, missing candidates: Why do certain electoral committees refuse to nominate candidates for mayors?
Autorzy:
Gendźwiłł, Adam
Żółtak, Tomasz
Rutkowski, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/414268.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Warszawski. Instytut Ameryk i Europy. Centrum Europejskich Studiów Regionalnych i Lokalnych (EUROREG)
Tematy:
wybory samorządowe
demokracja lokalna
kampania wyborcza
komitety wyborcze
przewaga urzędujących
local elections
local democracy
electoral campaign
electoral committees
incumbency advantage
Opis:
Artykuł dotyczy problemu ograniczonej podaży kandydatów na wójtów, burmistrzów i prezydentów miast. Od 2002 r. większość komitetów wyborczych tworzonych w gminach brała udział jedynie w wyborach do rad gmin, nie wystawiając kandydatów do organu wykonawczego. W latach 2002–2010 rósł również odsetek gmin, w których do wyborów stawał jeden kandydat. Analiza regresji logistycznej pokazuje, że na decyzje komitetów wyborczych o wystawianiu kandydatów wpływa ich wielkość (popularność), a także wielkość gminy. Decyzji o niewystawianiu kandydatów sprzyja istnienie dominującego komitetu oraz start w wyborach urzędujących już burmistrzów. Znane zjawisko incumbency advantage działa zatem nie tylko podczas wyborów, ale również przed nimi (na etapie zgłaszania kandydatów).
The authors consider the problem of limited supply of candidates for mayors. Since 2002, most electoral committees in Polish municipalities have only participated in the elections for municipal councils and not for the principal executive office. Between 2002 and 2010, there was also a growing share of municipalities in which only one candidate ran. The logistic regression analysis demonstrates that the electoral committees’ decision whether or not to nominate a candidate is influenced by their size (popularity), as well as the size of the municipality. If there is a dominating committee and competing incumbents, it is less probable that another candidate would run. It is evident that the well-known effect of incumbency advantage works not only during the elections but also before them (when candidates are registered).
Źródło:
Studia Regionalne i Lokalne; 2015, 4(62); 64-79
1509-4995
Pojawia się w:
Studia Regionalne i Lokalne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O związku partycypacji wyborczej i stabilności poparcia dla partii. Lokalne efekty frekwencyjne w wyborach parlamentarnych w Polsce w latach 2005–2011
On the Relationship between Electoral Participation and Stability of Electoral Support for Political Parties. Local Turnout Effects in Polish Parliamentary Elections, 2005–2011
Autorzy:
Gendźwiłł, Adam
Żółtak, Tomasz
Rutkowski, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/427447.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wybory
partycypacja wyborcza
mobilizacja wyborcza
chwiejność
elections
electoral participation
electoral mobilization
electoral volatility
Opis:
W analizach prezentowanych w artykule autorzy sprawdzają, czy zróżnicowanie przestrzenne zmian w poziomie partycypacji wyborczej jest systematycznie powiązane ze zróżnicowaniem przestrzennym zmian poparcia największych polskich partii politycznych. Analizując oficjalne wyniki wyborów parlamentarnych z lat 2005–2011, zagregowane na poziomie gmin, badają relację pomiędzy zmiennym poziomem uczestnictwa wyborczego a stabilnością systemu partyjnego w większej rozdzielczości przestrzennej. Z analiz wynika, że lokalne zmiany frekwencji wyborczej wpływają na lokalne zmiany poparcia partii, choć w sposób niesystematyczny. Autorzy szacują lokalne efekty frekwencyjne dla najważniejszych polskich partii, aby pokazać, jaki wpływ na ich wyborczy wynik ma mobilizacja i demobilizacja lokalnych elektoratów.
In the article the authors verify whether the spatial distribution of electoral participation is systematically related to the spatial distribution of changes in electoral support for the main Polish political parties. The analyses are based on the official results of parliamentary elections 2005–2011 aggregated at the municipal level, thus the relation between changing level of electoral participation and volatility is studied in the finer spatial resolution. The results suggest that local changes in turnout impact the local changes of support for main parties, but not systematically. The authors estimated local “turnout effects” for the main Polish parties in order to demonstrate how mobilization and demobilization of local electorates influences their electoral performance.
Źródło:
Studia Socjologiczne; 2014, 3(214); 107-126
0039-3371
Pojawia się w:
Studia Socjologiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
BADANIE MOŻLIWOŚCI WYKORZYSTANIA ZOBRAZOWAŃ DYNAMICZNYCH (WIDEO) Z NISKIEGO PUŁAPU LOTNICZEGO (BSP) DO OPRACOWAŃ FOTOGRAMETRYCZNYCH
Study of the possibility of using dynamic imagery (video) from a low level (BSP) for photogrammetric studies
Autorzy:
MŁYNARCZYK, ADAM
KRÓLEWICZ, SŁAWOMIR
RUTKOWSKI, PAWEŁ
Powiązania:
https://bibliotekanauki.pl/articles/896375.pdf
Data publikacji:
2019
Wydawca:
Poznańskie Towarzystwo Przyjaciół Nauk
Tematy:
UAV
photogrammetry
Metashape
film processing for photos
digital elevation model
ortophotomap
Opis:
The use of unmanned aerial vehicles is becoming more and more popular for making high-altitude and orthophotomap models. In this process, series of images are taken at specific intervals, usually lasting several seconds. This article demonstrates the ability to make models and orthophotomaps from dynamic images – video recorded from UAV. The best mutual coverage of photographs was indicated (95–96%) and the photogrammetric process for joining images was presented, through the creation of a point cloud to obtain a digital terrain model and the orotfotomap. The data was processed in 150 different variants and the usefulness of this method was demonstrated. Problems and errors that may occur during the processing of recorded image data are also described.
Źródło:
Badania Fizjograficzne Seria A - Geografia Fizyczna; 2019, 10(70); 53-64
2081-6014
Pojawia się w:
Badania Fizjograficzne Seria A - Geografia Fizyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aktualne problemy sektorów biokomponentów i biopaliw ciekłych w Polsce
Current problems of biocomponents and liquid biofuels sectors in Poland
Autorzy:
Mączyńska, Joanna
Kupczyk, Adam
Rutkowski, Dominik
Tucki, Karol
Powiązania:
https://bibliotekanauki.pl/articles/1385436.pdf
Data publikacji:
2019
Wydawca:
Polskie Wydawnictwo Ekonomiczne
Tematy:
transport
biopaliwa
biokomponent
rynek
biofuels
biocomponents
market
Opis:
Celem publikacji jest przedstawienie podstawowych aspektów związanych z biokomponentami i biopaliwami ciekłymi produkowanymi w Polsce. Omówiono najważniejsze regulacje prawne stanowiące o sposobie funkcjonowania rynku biokomponentów oraz podstawowe informacje związane z produkcją estrów metylowych i bioetanolu w Polsce w latach 2012-2018. Zwrócono uwagę, że rynek ten oparty jest na surowcach pochodzenia rolniczego, co w świetle obecnej polityki UE stanowi istotne wyzwanie w najbliższych latach. Dodatkowo przedstawiono wyniki badań dotyczące atrakcyjności sektorów bioetanolu konwencjonalnego, lignocelulozowego oraz estrów metylowych.
The aim of the work was to present the basic aspects related to the biocomponents and liquid biofuels produced in Poland. The most important legal regulations related to the functioning of biocomponents market and basic information connected with the methyl esters and bioethanol production in Poland in 2012-2018 were discussed. It was pointed out that the market is based on agricultural raw materials, which is a significant challenge in the coming years in the light of current EU policy. In addition, the results of studies on the attractiveness of conventional and lignocellulosic bioethanol and methyl esters sectors are presented.
Źródło:
Gospodarka Materiałowa i Logistyka; 2019, 2; 23-27
1231-2037
Pojawia się w:
Gospodarka Materiałowa i Logistyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation and measurement studies of the VDES system’s terrestrial component
Autorzy:
Bronk, Krzysztof
Koncicki, Patryk
Lipka, Adam
Rutkowski, Dominik
Wereszko, Błażej
Powiązania:
https://bibliotekanauki.pl/articles/258780.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
maritime radiocommunications
E-navigation
VHF Data Exchange System
VDE-TER
Maritime VHF channels
Opis:
In the paper, the measurement and simulation results of the VDES (VHF Data Exchange System) terrestrial component are discussed. It is anticipated that VDES will be one of the major solutions for maritime communications in the VHF band and its performance will be sufficient to fulfill the requirements of the e-navigation applications. The process of the VDES standardization (ITU R, IALA) has not been officially completed yet, but substantial amount of technical information about the future system’s terrestrial component (VDE-TER) is already available. The paper is divided into three general parts: (a) theoretical presentation of the system’s physical layer and the radio channels applicable to VDES, (b) simulation results (BER, BLER, channel delay between two propagation paths and its influence on bit rates) and (c) measurement results (useful ranges, BER). It turned out that in real maritime conditions, the VDES system can offer ranges between 25 and 38 km for the configurations assumed during the measurement campaign. Those results are generally compliant with the theoretical data in the line-of-sight conditions. In the NLOS scenarios, where fading becomes the dominant phenomenon, the discrepancies between the measurements and the theoretical results were more significant. The obtained results confirmed that VDES provides a large coding gain, which significantly improves the performance of data transmission and increases the bit rate compared to the existing maritime radiocommunication solutions. It should be noted that the results presented in the article were used by the IALA while developing the current version of the VDES specification.
Źródło:
Polish Maritime Research; 2019, 1; 95-106
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kształtowanie innowacji produkowanej na przykładzie ładowacza czołowego Ł-110
Shaping of innovative machine construction on example of L-100 type front loader
Autorzy:
Rutkowski, Janusz
Pawlowski, Tadeusz
Łazarski, Roman
Raczuk, Ryszard
Szymaniuk, Adam
Powiązania:
https://bibliotekanauki.pl/articles/883969.pdf
Data publikacji:
2018-08-31
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
ladowacze czolowe
parametry techniczne
ladowacz czolowy L-110
projektowanie
innowacje konstrukcyjne
innowacje techniczne
sterowanie hydrauliczne
front loaders
middle transport
hydraulic control
agricultural technology
Opis:
W artykule przedstawiono wybrane zagadnienia kształtowania innowacji produktowej na przykładzie ładowacza czołowego Ł-110. Przeprowadzono analizę rynku producentów ładowaczy w Polsce dla potrzeb wykazania innowacji krajowej. Dokonano oceny rozwiązań i technologii produkcji oraz przedstawiono wybrane wyniki badań B+R (badań przemysłowych i prac rozwojowych). Przedstawiono pierwszy prototyp innowacyjnego ładowacza Ł-110, który zbudowano na potrzeby testów eksperymentalnych, weryfikacji założeń projektowych i demonstracji nowego produktu.
The article presents selected issues of shaping of product innovation based on the example of the Ł-110 front loader. An analysis of the loader manufacturers market in Poland was carried out for the purpose of demonstrating national innovation. The evaluation of production solutions and technologies was performed and selected R & D results were presented (industrial research and development works). The first prototype of the innovative Ł-110 loader was presented, which was built for the needs of experimental tests, verification of design assumptions and demonstration of a new product.
Źródło:
Technika Rolnicza Ogrodnicza Leśna; 2018, 4; 2-6
1732-1719
2719-4221
Pojawia się w:
Technika Rolnicza Ogrodnicza Leśna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Predicting Competitive Swimming Performance
Autorzy:
Wilk, Robert
Fidos- Czuba, Olga
Rutkowski, Łukasz
Kozłowski, Krzysztof
Wiśniewski, Piotr
Maszczyk, Adam
Stanula, Arkadiusz
Roczniok, Robert
Powiązania:
https://bibliotekanauki.pl/articles/1055083.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Szczeciński. Wydawnictwo Naukowe Uniwersytetu Szczecińskiego
Tematy:
Kohonen feature map
regression
sports selection
swimming performance
Opis:
The aim of this study was to present the results of analyses conducted by means of complementary analytic tools in order to verify their efficacy and the hypothesis that Kohonen’s neural models may be applied in the classification process of swimmers. A group of 40 swimmers, aged 23 ±5 years took part in this research. For the purpose of verification of usefulness of Kohonen’s neural models, statistical analyses were carried out on the basis of results of the independent variables (physiological and physical profiles, specific tests in the water). In predicting the value of variables measured with the so called strong scale regression models, numerous variables were used. The construction of such models required strict determination of the endogenous variable (Y – results for swim distances of 200 m crawl), as well as the proper choice of variables in explaining the study’s phenomenon. The optimum choice of explanatory variables for the Kohonen’s networks was made on the grounds of regression analysis. During statistical analysis of the gathered material neural networks were used: Kohonen’s feature maps (data mining analysis). The obtained model has the form of a topological map, where certain areas can be separated, and the map constructed in this way can be used in the assessment of candidates for sports training.
Źródło:
Central European Journal of Sport Sciences and Medicine; 2015, 9, 1; 105-112
2300-9705
2353-2807
Pojawia się w:
Central European Journal of Sport Sciences and Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies