Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Patel, G." wg kryterium: Autor


Wyświetlanie 1-10 z 10
Tytuł:
Functional appliances: The activator and the functional regulator- A review
Autorzy:
Kishnani, R.
Uppal, S.
Patel, G.
Acharya, A.
Metha, P.
Powiązania:
https://bibliotekanauki.pl/articles/1916521.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Medyczny w Białymstoku
Tematy:
Activator
functional regulator
myofunctional appliances
Opis:
In this review of literature we are discussing the effects of functional appliances on the dentofacial structures in the treatment of Class II malocclusions. Despite recent questions on the effectiveness of early treatment, it is generally recognized that the use of growth modification still has a place in modern orthodontic practices. The aim of this review is to study growth modification of the mandible by two appliances: the activator and the functional regulator. Mechanism of action, design, effect on dentofacial structures, etc. of activator and the functional regulators are discussed here. Regardless of the appliance used, there are a large amount of variations in individual patient response to treatment. A second stage of treatment with a fixed appliance is necessary in most cases to ensure proper alignment and interdigitation of the dentition. Regardless of the appliance used, the success of treatment is dependent on patient cooperation.
Źródło:
Progress in Health Sciences; 2014, 4, 2; 150-156
2083-1617
Pojawia się w:
Progress in Health Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-Objective Optimization of Squeeze Casting Process using Genetic Algorithm and Particle Swarm Optimization
Autorzy:
Patel, G. C. M.
Krishna, P.
Vundavilli, P. R.
Parappagoudar, M. B.
Powiązania:
https://bibliotekanauki.pl/articles/379601.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
squeeze casting process
multi-objective optimization
genetic algorithm
squeeze casting
prasowanie stopu
optymalizacja wielokryterialna
algorytm genetyczny
Opis:
The near net shaped manufacturing ability of squeeze casting process requiresto set the process variable combinations at their optimal levels to obtain both aesthetic appearance and internal soundness of the cast parts. The aesthetic and internal soundness of cast parts deal with surface roughness and tensile strength those can readily put the part in service without the requirement of costly secondary manufacturing processes (like polishing, shot blasting, plating, hear treatment etc.). It is difficult to determine the levels of the process variable (that is, pressure duration, squeeze pressure, pouring temperature and die temperature) combinations for extreme values of the responses (that is, surface roughness, yield strength and ultimate tensile strength) due to conflicting requirements. In the present manuscript, three population based search and optimization methods, namely genetic algorithm (GA), particle swarm optimization (PSO) and multi-objective particle swarm optimization based on crowding distance (MOPSO-CD) methods have been used to optimize multiple outputs simultaneously. Further, validation test has been conducted for the optimal casting conditions suggested by GA, PSO and MOPSO-CD. The results showed that PSO outperformed GA with regard to computation time.
Źródło:
Archives of Foundry Engineering; 2016, 16, 3; 172-186
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal credit period and ordering quantity for credit dependent trended demand and deteriorating items with maximum lifetime
Autorzy:
Shah, N. H.
Shah, D. B.
Patel, D. G.
Powiązania:
https://bibliotekanauki.pl/articles/970075.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
inventory
trended demand
trade credit
default risk
deterioration
maximum lifetime
Opis:
In this paper, an inventory system is analyzed regarding a trended demand. The seller offers its buyer a credit period for settling the account, which attracts more buyers and enhances market demand. However, the offer of credit period leads to default risk for the supplier. The units in inventory are deteriorating continuously and also have definite maximum lifetime. The aim is to maximize the profit of the retailer. Numerical examples are given to validate the developed mathematical model. Sensitivity analysis is performed to obtain the critical inventory parameters and deduce the managerial strategies.
Źródło:
Control and Cybernetics; 2015, 44, 2; 311-320
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prediction of Secondary Dendrite Arm Spacing in Squeeze Casting Using Fuzzy Logic Based Approaches
Autorzy:
Patel, M. G. C.
Krishna, P.
Parappagoudar, M. B.
Powiązania:
https://bibliotekanauki.pl/articles/380567.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
squeeze casting process
secondary dendrite arm spacing
fuzzy logic
adaptive network based fuzzy
interface system
prasowanie stopu
odległość ramion dendrytów
logika rozmyta
system interfejsowy
Opis:
The quality of the squeeze castings is significantly affected by secondary dendrite arm spacing, which is influenced by squeeze cast input parameters. The relationships of secondary dendrite arm spacing with the input parameters, namely time delay, pressure duration, squeeze pressure, pouring and die temperatures are complex in nature. The present research work focuses on the development of input-output relationships using fuzzy logic approach. In fuzzy logic approach, squeeze cast process variables are expressed as a function of input parameters and secondary dendrite arm spacing is expressed as an output parameter. It is important to note that two fuzzy logic based approaches have been developed for the said problem. The first approach deals with the manually constructed mamdani based fuzzy system and the second approach deals with automatic evolution of the Takagi and Sugeno’s fuzzy system. It is important to note that the performance of the developed models is tested for both linear and non-linear type membership functions. In addition the developed models were compared with the ten test cases which are different from those of training data. The developed fuzzy systems eliminates the need of a number of trials in selection of most influential squeeze cast process parameters. This will reduce time and cost of trial experimentations. The results showed that, all the developed models can be effectively used for making prediction. Further, the present research work will help foundrymen to select parameters in squeeze casting to obtain the desired quality casting without much of time and resource consuming.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 51-68
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free Vibration Analysis of A357 Alloy Reinforced with Dual Particle Size Silicon Carbide Metal Matrix Composite Plates Using Finite Element Method
Autorzy:
Lakshmikanthan, A.
Mahesh, V.
Prabhu, R. T.
Patel, M. G. C.
Bontha, S.
Powiązania:
https://bibliotekanauki.pl/articles/1837831.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
finite element method
shear deformation theory
FSDT
A357 alloy
Hamilton’s principle
A357/DPS-SiC
composites
metoda elementów skończonych
teoria odkształceń
stop A357
zasada Hamiltona
kompozyty
Opis:
In this work, the free vibration behaviour of A357 composite plate reinforced with dual particle size (DPS) (3 wt.% coarse + 3 wt.% fine, 4 wt.% coarse + 2 wt.% fine, and 2 wt.% coarse + 4 wt.% fine) SiC is evaluated using the finite element method. To this end, first-order shear deformation theory (FSDT) has been used. The equations of motion have been derived using Hamilton’s principle and the solution has been obtained through condensation technique. A thorough parametric study was conducted to understand the effect of reinforcement size and weight fraction, boundary conditions, aspect ratio and length-to-width ratio of plate geometry on natural frequencies of A357/DPS-SiC composite plates. Results reveal significant influence of all the above variables on natural frequency of the composite plates. In all the cases, A357 composite plate reinforced with 4 wt.% coarse and 2 wt.% fine SiC particles displayed the highest natural frequency owing to its higher elastic and rigidity modulus. Further, the natural frequencies increase with decrease in aspect ratio of the plate geometry. Natural frequency also decreases with increase in the number of free edges. Lastly, increasing the length-to-width ratio drastically improves the natural frequency of the plates.
Źródło:
Archives of Foundry Engineering; 2021, 21, 1; 101-112
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling and Optimization of Phenol Formaldehyde Resin Sand Mould System
Autorzy:
Chate, G. R.
Patel, M. G. C.
Parappagoudar, M. B.
Deshpande, A. S.
Powiązania:
https://bibliotekanauki.pl/articles/381857.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mould hardness
phenol-formaldehyde resin
permeability
desirability function approach
design of experiments
masy formierskie
żywica fenolowo-formaldehydowa
przepuszczalność
twardość
optymalizacja
Opis:
Chemical bonded resin sand mould system has high dimensional accuracy, surface finish and sand mould properties compared to green sand mould system. The mould cavity prepared under chemical bonded sand mould system must produce sufficient permeability and hardness to withstand sand drop while pouring molten metal through ladle. The demand for improved values of permeability and mould hardness depends on systematic study and analysis of influencing variables namely grain fineness number, setting time, percent of resin and hardener. Try-error experiment methods and analysis were considered impractical in actual foundry practice due to the associated cost. Experimental matrices of central composite design allow conducting minimum experiments that provide complete insight of the process. Statistical significance of influencing variables and their interaction were determined to control the process. Analysis of variance (ANOVA) test was conducted to validate the model statistically. Mathematical equation was derived separately for mould hardness and permeability, which are expressed as a non-linear function of input variables based on the collected experimental input-output data. The developed model prediction accuracy for practical usefulness was tested with 10 random experimental conditions. The decision variables for higher mould hardness and permeability were determined using desirability function approach. The prediction results were found to be consistent with experimental values.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 162-170
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
XRF analysis of Pongamia pinnata stem of semi arid region of Kachchh
Autorzy:
Ram, V.R.
Patel, M.G.
Ram, P.N.
Khatri, T.T.
Dave, P.N.
Powiązania:
https://bibliotekanauki.pl/articles/11000.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Opis:
The objective of the present investigation was to study the chemical composition of stem of Pongamia pinnata is a species of tree native to India growing in semi-arid region of Kachchh district, Gujarat, India. The stem of Pongamia pinnata were subjected to Energy Dispersive X-ray Fluorescence (EDXRF) and were analyzed for different mineral composition. As the X-ray Fluorescence is one of the most reliable and accurate, as well as it is also a consistent and nondestructive method for analysis of major and trace elements using a single pressed pellet. During the study it was found that Potassium, Chloride, Calcium, Silicon, Sulfur, Aluminum, Phosphorus were noted in higher amounts, compared to that of other elements like Manganese, Iron, Nickel, Copper, Zink, Bromide, Rubidium, Strontium, Stannous, whereas the elements which were not detected in stem of Pongamia pinnata are Titanium, Cobalt, Hafnium and Tantalum.
Źródło:
International Letters of Natural Sciences; 2015, 40
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical solution of non-Newtonian fluids flow past an accelerated vertical infinite plate in the presence of free convection currents
Autorzy:
Patel, M.
Timol, M. G.
Powiązania:
https://bibliotekanauki.pl/articles/265022.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
płyn nienewtonowski
analiza podobieństwa
prąd
non-Newtonian fluids
convection currents
similarity analysis
Opis:
A similarity analysis of non-Newtonian fluid flow past an accelerated vertical infinite plate in the presence of free convection current is carried out. A group theoretic generalized dimensional analysis is employed to achieve the governing non-linear ordinary differential equations in the most general form. Numerical solutions of these equations are given with the plot of their velocity profiles with the effects of Pr-Prandtl number and Gr-Grashof number.
Źródło:
International Journal of Applied Mechanics and Engineering; 2013, 18, 3; 761-777
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A convergent approach for the synthesis of new pyrazolyl bipyridinyl substituted coumarin derivatives as antimicrobials
Autorzy:
Bhila, V. G.
Chovatiya, Y. L.
Patel, C. V.
Giri, R. R.
Brahmbhatt, D. I.
Powiązania:
https://bibliotekanauki.pl/articles/411982.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Coumarin
Bipyridine
Pyrazole
Kröhnke’s reaction
antimicrobial activity
Opis:
Some new 3-[3-(1-phenyl-3-aryl-1H-pyrazol-4-yl)acryloyl]coumarins 3a-f were synthesized (coumarin chalcones) by the condensation of various 3-acetyl coumarins 1 and appropriate 1-phenyl-3-aryl-1H-pyrazole-4-carbaldehyde 2. These coumarin chalcones 3a-f were then employed for the synthesis of pyrazolyl bipyridinyl substituted coumarins 7a-f, 8a-f, and 9a-f under Krohnke’s reaction condition. The characterization of all the synthesized compounds was carried out by elemental analysis, IR, 1H-NMR, 13C-NMR, DEPT-135 and mass spectral analysis. In addition to that, in vitro antimicrobial competency of the title compounds was assessed against selected pathogens. Compounds 3b, 3e, 7b, 8b, 8c and 9b exhibited excellent antimicrobial activity and said to be the most proficient members of the series.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2015, 40; 1-16
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies