Autor: Flekiewicz, B. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: New diagnostic methods of alternative LPG/CNG injection systems
Autorzy:: Flekiewicz, B.
Flekiewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/242343.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: CNG
LPG
SI engine
maintenance
fuel injection
Opis:: Diagnostic methods of gas alternative feeding systems were presented in this paper. Methods of validation for properly cooperation between OEM petrol systems and gas injection system were described. Procedures allowing the analysis ofproper operation of both petrol and alternative feeding systems were presented. A detailed study has been done on seąuential injection system, as a solution fulfilling restricted requirements of new SI engines. Obtaining both satisfactory emission reduction level and minimal power drop for alternative engine gas operating is only possible with all diagnostic procedures especially ones connected with system prototyping phase being done with high precision equipment characterized by low inertia of transducers. Sensors output signals reąuire acquisition with the use of more complex and faster systems. Proper choice of test equipment at each step, guarantees repeatability and what results also reliability ofrealized diagnostic procedures. Influence of alternative gas fuelling systems on mixture adaptation, transfer function, diagnostic methods for prototyping phase, diagnostic procedures for alternatively powered vehicle operation, diagnosis of sequential gas injection system during normal system maintenance are presented in the paper.
Źródło:: Journal of KONES; 2009, 16, 2; 109-116
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: An attempt of exhaust gases composition prediction in si engines powered by petrol and gaseous fuels
Autorzy:: Flekiewicz, M.
Kubica, G.
Flekiewicz, B.
Powiązania:: https://bibliotekanauki.pl/articles/245747.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: CNG
LPG
exhaust gases
SI engine
combustion analysis
Opis:: Optimization procedure of the si engines feeding systems requires the application of newer and more sophisticated tools, as an addition to well known but expensive experimental methods. Numerical methods can be considered nowadays as once playing the most important role in the combustion process analysis. Paper describes the application of the dual zone model, allowing the analysis of the combustion process in an SI engine with the possibility of estimating 10 different exhaust gases i.e.: CO2, CO, H2O O2, NO, N2, H2, H, O and OH. The research has been carried on a 1.6 litr es four cylinder SI engine, fed with petrol and alternatively with LPG and CNG. In-cylinder pressure for the 4th cylinder of the tested engine has been acąuired for several engine speeds. registered in-cylinder pressure traces p=p((fi), together with the volume variation nii=nii((fi) infunction ofcrank angle, were used in the combustion process simulating calculations. Obtained results made it possible to compare selected parameters describing the combustion process. Obtained results do also prove recognized fact related to the higher temperature necessary to initiate gaseous fuel combustion.
Źródło:: Journal of KONES; 2009, 16, 4; 105-113
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The possibility of the SI engine CO2 emission reduction with the application of CNG-hydrogen blends
Autorzy:: Flekiewicz, M.
Kubica, G.
Flekiewicz, B.
Powiązania:: https://bibliotekanauki.pl/articles/248095.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: CNG
hydrogen
mixtures
Passenger car engine
combustion analysis
Opis:: The influence of hydrogen-methane blends application in SI engines on their CO2 emission is the main goal of this paper. The 1.6 litre engine alternatively fed with either petrol, CNG and with methane-hydrogen blends has been tested in the research program. The possibility of passenger car engine operation on H2-CH4 mixtures has been demonstrated in the paper, with the underlining of the potential of those mixtures in the increasing of the engine efficiency. Necessary changes in strategy of engine regulation, especially in air/fuel ratio, ignition advance and EGR rate, were noticed and prepared. The methane-hydrogen blends, which were used in the research programme featured ratios as follows: 5%, 10% and 15% of hydrogen. For selected engine operating points, following data has been acquired: in cylinder pressure variation, crank angle, manifold pressure and finally mass fuel consumption. On the basis of registered data for all fuels - burned temperature in cylinder has been estimated, as well as the charge combustion ratio, and the heat release rate. With help of mathematical model describing the exhaust gases formation it has been possible to estimate the NO, CO and CO2 emission level. Obtained results made it possible to compare the combustion process for all tested fuels and pointed on the significant influence of hydrogen percentage for the methane-hydrogen blends, on the CO2 emission reduction up to 20%. Negative aspects of chosen blends application have been also describe in the paper, especially of increasing engine thermal load.
Źródło:: Journal of KONES; 2008, 15, 3; 139-146
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Recognition of fuel feeding SI engines with use of dimensional and nondimensional vibration parameters
Autorzy:: Flekiewicz, M.
Fabiś, P.
Flekiewicz, B.
Powiązania:: https://bibliotekanauki.pl/articles/243362.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vibration
combustion noise
gaseous fuel
LPG
CNG
Opis:: The availability of gaseous fuels like natural gas and propane butane mixtures has lead to worldwide popularity of internal combustion engines running dual fuel or alternatively gas powered. They are known as fuels more resistant to knocking than conventional liquid fuels and as ones less pollutant, their better mixing with air is also well recognized. There have been many published works on the use of gaseous fuels but actually the problem of the combustion noise, as a very important source of acoustic discomfort is not receiving attention. Combustion noise occurs in two forms, direct and indirect. It is transmitted throughout the engine block as a vibration at a different spectrum of frequencies. In this study an attempt is made to correlate the combustion noise to the operating parameters for LPG and CNG powered engine as compared to petrol fuelled engine. Combustion pressure and vibration of cylinder block data are measured and presented for engine running on LPG/CNG and compared to the results obtained for engine fed by petrol. Signals of multiple resonances in combustion chamber and corresponding vibration signals of cylinder block of engine were considered for one combustion cycle. A four cylinder, 1.6 dm3 spark-ignition engine converted to run on LPG and CNG was tested in the project. The engine test stand was fully computerized and the cylinder pressure data, acceleration of vibration of engine block, crank angle data was stored on a PC. The influence of engine speed, load on combustion and engine block vibration was examined for all fuels. A few of well know diagnostic parameters were used for comparison of the engine noise for operation on petrol, LPG and CNG.
Źródło:: Journal of KONES; 2007, 14, 3; 153-162
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Analysis of operating conditions and emissions of the selected components of exhaust gas during SI engine braking phase
Autorzy:: Ubysz, A.
Łazarz, B.
Flekiewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/245339.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: toxic emissions
engine braking phase
catalytic converter
non-driving phases
Opis:: This paper presents analysis of conditions of CO2, CO, HC and NOX emissions during engine braking phase invehicles with 1.6 SI engine, based on the results of investigations by Professor Romaniszyn. The analysis aimed to determine the effect of cooling of catalytic converter and engine chamber on emissions of toxins and fuel efficiency in next driving phase. Based on own investigations, the synthesis of fuel consumption under three non-driving conditions of engine operation (i.e. continuous drive, engine braking and drive in neutral) is also presented. Current research centres often carry out extensive investigations of fuel efficiency and emissions of toxic compounds during real use of vehicles. Their results, due to previous assumptions or limitations in the scope of investigations, rarely provide an overall view of the problem. These attempts are typically made in scientific papers and dissertations [1-3]. Selective approach to the problem can be justified by the complexity and varied impact of each phase of engine 's operation on fuel consumption under unsteady heat conditions. Fuel consumption map in speed-acceleration coordinates for vehicle and engine, characteristics of CH emissions, parameters of engine braking phase and temperature characteristics of exhaust gases before catalytic converter are presented in the paper.
Źródło:: Journal of KONES; 2009, 16, 4; 469-476
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Flekiewicz, B." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język