Autor: Aboudzadeh Rovais, M. R. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Targetry and radiochemistry for no-carrier-added production of 117,118m,119,120m,122Sb
Autorzy:: Sadeghi, M.
Aboudzadeh Rovais, M. R.
Enferadi, M.
Sarabadani, P.
Powiązania:: https://bibliotekanauki.pl/articles/147059.pdf
Data publikacji:: 2011
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: electrodeposition
targetry
silica-gel column
natSn
117,118m,119,120m,122Sb
Opis:: Targetry of natSn-target on Cu substrate was investigated for the production of 117,118m,119,120m,122Sb. The electrodeposition experiments were carried out using potassium stannate trihydrate and potassium hydroxide. The optimum conditions of the electrodeposition of tin were as follows: 40 g/L natSn, temperature 75°C and current density (dc) used throughout of 50 mA/cm2. The deposited target was irradiated at 160 ěA current and 16 MeV proton beam (10 min). Separation of no-carrier-added (nca) 117,118m,119,120m,122Sb from the irradiated natSn target hydrochloric solution was investigated using silica-gel column chromatography.
Źródło:: Nukleonika; 2011, 56, 1; 9-15
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Computer simulation of temperature distribution on a solid target for 201Tl production
Autorzy:: Aboudzadeh Rovais, M. R.
Yousefi, K.
Ardaneh, K.
Mirzaii, M.
Powiązania:: https://bibliotekanauki.pl/articles/147613.pdf
Data publikacji:: 2011
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: heat transfer
computer simulation
solid target
thallium-201
Opis:: Thallium-201 is of great interest in nuclear medicine for diagnostic purposes. It is produced by the 203Tl(p,3n)201Pb nuclear reaction. Since the target for 201Tl production is a solid target and the maximum beam current for the irradiation has a direct relation with its temperature surface, therefore, the control of temperature during the irradiation is essential. Designing a proper cooling system is one of the important and determining parameters in radionuclide production efficiency. Non-controlled temperature would cause melting and consequently loss of target materials that could be very costly especially when an isotopically enriched material is used. In this study, the heat transfer and temperature distribution on the target has been simulated based on a computational fluid dynamics (CDF) code for the thermal behavior of the target during the irradiation and under the different beam currents, cooling flow rates and target designing. The results on the routinely used target for the production of 201Tl in AMIRS, showed that there was a good linearity between proton beam currents (in the range of 100–350 mi A) and maximum temperature on the thallium target (345–458 K). The results also showed that the flow rate of the cooling water can be brought down (from routinely used 45 L/min) to 15 L/min without any risk of melting of target material.
Źródło:: Nukleonika; 2011, 56, 4; 283-289
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Aboudzadeh Rovais, M. R." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język