Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "electromagnetic analysis" wg kryterium: Wszystkie pola


Tytuł:
Coupled static and dynamic FE analyses of a nonlinear electromechanical vibration energy harvester
Autorzy:
Kulik, M.
Jagieła, M.
Powiązania:
https://bibliotekanauki.pl/articles/97381.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
energy harvesting
coupled structural–electromagnetic analysis
finite element analysis
Opis:
The paper presents the coupled static and dynamic mechanical–electromagnetic finite element analyses of an electromechanical vibration energy harvesting converter with permanent–magnet excitation. The system consists of a small, milliwatt power range, linear–motion generator connected to a cantilever–beam spring element. The finite element equations derived for the mechanical part of the system according to the 1–D Timoshenko beam theory are coupled strongly with those describing the 2–D distribution of magnetic field in the generator and those associated with the electric circuit. The considered electromechanical coupling allows for prediction of static and dynamic response of the system subjected to action of externally applied force. The static displacement of the moving element is computed via solution of the nonlinear system of equations and is used as an initial solution in dynamic analysis. For computation of the dynamic response of the system the time–stepping procedure based on the Crank– Nicolson discretisation schema is applied. The models are positively validated against the measurements carried out on the laboratory test–stand.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 256-267
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electromagnetic analysis, efficiency map and thermal analysis of an 80-kW IPM motor with distributed and concentrated winding for electric vehicle applications
Autorzy:
Młot, Adrian
Korkosz, Mariusz
Lechowicz, Andrzej
Podhajecki, Jerzy
Rawicki, Stanisław
Powiązania:
https://bibliotekanauki.pl/articles/2172808.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AC losses
concentrated winding
distributed winding
motor performance
radial flux permanent magnet motor
slot fill factor
thermal analysis
Opis:
This paper presents a comparison of an AC radial flux interior permanent magnet (IPM) motor with the distributed winding (DW) and concentrated winding (CW). From time to time, manufacturers of electric vehicles change the design of electric motors, such changes may include changing the DW into CW and vice versa. A change to the winding in a radial permanent magnet synchronous motor may lead to a change in motor parameters during motor operation and /or change in the distribution of the magnetic field and thermal circuit of the electrical machine. The electromagnetic analysis, efficiency map, mechanical stress, and thermal analysis of the machine with the DW and CW are presented in this paper. This article describes the advantages and disadvantages of selected stator winding designs and helps understand manufacturers’ designers how the DW and CW play a key role in achieving the designed motor’s operational parameters such as continuous performance. Analyzing the performance of both machines will help identify their advantages and disadvantages with regard to thermal phenomena, magnetic field and operational parameters of the presented IPM prototypes. Both prototypes are based on commonly used topologies such as 12/8 (slot/pole) and 30/8 (slot/pole) IPM motors consisting of magnets arranged in a V-shape. The AC IPM motor was designed for an 80 kW propulsion system to achieve 170 N·m at a base speed of 4 500 rpm. Modern CAD tools are utilized throughout the numerical computations based on 2-D finite element methods. Selected test data are used to verify and validate the accuracy of finite element models.
Źródło:
Archives of Electrical Engineering; 2022, 71, 4; 981--1002
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coupled dynamic FE analysis of permanent-magnet mechanical vibration energy harvesting converter
Autorzy:
Kulik, M.
Jagieła, M.
Powiązania:
https://bibliotekanauki.pl/articles/377720.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
energy harvesting
coupled structural-electromagnetic analysis
finite element analysis
Opis:
The paper presents a coupled dynamic mechanical-electromagnetic finite element analysis of a vibration energy harvesting converter with permanent-magnet excitation. The system consists of a small, miliwatt power range, linear-motion permanent-magnet generator connected to a cantilever-beam spring element. The finite element equations derived for the mechanical part of the system according to the 1-D Timoshenko beam theory are coupled strongly with equations describing the 2-D distribution of magnetic field in the generator and those associated with the electric circuit. The time-stepping procedure based on the Crank-Nicolson discretisation schema is applied to the obtained system of differential-algebraic equations. The model is shown to provide satisfactory predictions of the system dynamic performance which is confirmed experimentally.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2016, 85; 245-254
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A dual-stator brushless doubly-fed generator for wind power application
Autorzy:
Liu, Hao
Song, Yakai
Bai, Chunlan
He, Guofeng
Yin, Xiaoju
Powiązania:
https://bibliotekanauki.pl/articles/27309959.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
doubly-fed machine
dual-stator
electromagnetic analysis
operational characteristics modes
wind power generation
Opis:
A novelty dual-stator brushless doubly-fed generator (DSBDFG) with magnetic-barrier rotor structure is put forward for application in wind power. Compared with a doubly-fed induction generator, the DSBDFG has virtues of high reliability and low maintenance costs because of elimination of brush and sliprings components. Therefore, the proposed structure has tremendous potential as a wind power generator to apply in wind power. According to the operating principle of electric machine, the DSBDFG is studied in wind power application. At first, the topology, the winding connecting, the rotor structure, the power flow chart of different operating models and the variable speed capability of electric machine are discussed and analyzed. Then, a 50 kW DSBDFG is designed. Based on the principal dimension of the design electric machine, the electromagnetic characteristics of the DSBDFG with different running modes are analyzed and calculated to adopt the numerical method. From the result, it meets the requests of electromagnetic consistency and winding connecting in the design electric machine. Meanwhile, it confirms the proposed DSBDFG has the strong ability of speed regulation.
Źródło:
Archives of Electrical Engineering; 2023, 72, 4; 1073--1087
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie przetwarzania równoległego do analizy pola elektromagnetycznego wielkiej częstotliwości
Parallel processing applied to high frequency electromagnetic field analysis
Autorzy:
Walendziuk, W.
Powiązania:
https://bibliotekanauki.pl/articles/157259.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
metoda FDTD
klaster
obliczenia równoległe
FDTD method
cluster system
parallel computing
Opis:
W artykule przedstawiono algorytmy równoległe, mające zastosowanie w metodzie FDTD (ang. Finite-Differences Time-Domain), będącej jedną z najpopularniejszych metod analizy pola elektromagnetycznego wielkiej częstotliwości. W pracy przedstawiono metodę dekompozycji analizowanej przestrzeni, jak również algorytmy dekompozycji programu na zespół współbieżnych wątków. Ze względu na szczególne zainteresowanie autora algorytmami mającymi zastosowanie w klastrach komputerowych, przedstawione będą wyniki doświadczeń, uzyskanych w czasie testów wydajności programu równoległego, opartego na dekompozycji przestrzeni w wersji podziału "plastrowego". Zdecydowano się na przedstawienie algorytmów zaimplementowanych w klastrze homogenicznym, jak również w heterogenicznym - przy wykorzystaniu dodatkowego algorytmu dynamicznego podziału obszaru analizy.
The paper contains parallel algorithms applied in the FDTD method, which is one of more popular ways of electromagnetic field of high frequency analysis. The work shows algorithms which decompose a program into a group of parallel threads, and a method of the analyzed area decomposition. The first type of algorithms enables achieving good speedups and makes it possible to use e.g. graphic cards in computations conducted with the use of the FDTD method. Whereas space decomposing algorithms help enlarge the analyzed area represented by a grid of elements built of electromagnetic field components presented in a differential form. Thanks to that it is possible to compute areas of great capacity, greater than the com-putational abilities of a single PC unit. The work focuses on presenting the results of efficiency examination of the parallel program based on this method. The author decided to show algorithms implemented on a homogeneous cluster, as well as in a heterogeneous one-with the use of an additional dynamic decomposition of the analyzed area.
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 2, 2; 111-114
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Electromagnetic Phenomena in HTc Superconductors
Autorzy:
Sosnowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/1812341.pdf
Data publikacji:
2008-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.25.Qt
74.25.Sv
Opis:
Unique electromagnetic properties, especially concerning recent observations of the giant remanent magnetic moment in HTc superconductors, require new approach to modeling these phenomena in the oxide ceramics. The present paper is devoted to the analysis of the influence of flux pinning on critical current and flux trapping in HTc superconductors. Modeling of the interaction between nanosized pinning centers and pancake vortices is presented, allowing to determine critical current density, taking into account elasticity forces of the vortices lattice. Ceramic structure of oxide superconductors was considered in trapped flux analysis. The mechanism of trapped flux generation was regarded as strongly related to vortex pinning and critical current phenomena.
Źródło:
Acta Physica Polonica A; 2008, 114, 1; 269-274
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Armature MMF and electromagnetic performance analysis of dual three-phase 10-pole/24-slot permanent magnet synchronous machine
Autorzy:
Chen, Zhenfei
Xing, Ning
Ma, Hongzhong
Li, Zhixin
Li, Jiayu
Fan, Chenyang
Powiązania:
https://bibliotekanauki.pl/articles/2202550.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dual three-phase winding
fractional-slot
concentrated winding
permanent magnet synchronous machines (SCW-PMSMs)
MMF harmonic analysis
space harmonics
magnet eddy-current loss (ECL)
SVPWM voltage supply
Opis:
Fractional-slot concentrated-winding permanent magnet synchronous machines (FSCW-PMSMs) have a good prospect of application in the drive system of electric and hybrid electric vehicles. However, the armature magnetomotive force (MMF) of FSCWPMSM contains a large number of space harmonics, which induce large magnet eddycurrent loss (ECL). To solve this problem, a dual three-phase 10-pole and 24-slot winding layout is proposed.MMFharmonic analysis shows that the 1st, 7th and 17th space-harmonic winding factors of the proposed winding can be reduced by 100%, 87% and 87% respectively, compared with a dual three-phase 10-pole and 12-slot winding. Electromagnetic performances of the proposed machine under rated sinusoidal current supply and space vector pulse-width-modulated (SVPWM) voltage supply are investigated based on 2D finite-element analysis. It is shown that the proposed machine can meet the requirement of torque and efficiency in the full speed range. Especially, magnet ECL can be reduced greatly due to the reduction of the 7th and 17th space harmonics.
Źródło:
Archives of Electrical Engineering; 2023, 72, 1; 189--210
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of errors in on-wafer measurements due to multimode propagation in CB-CPW
Autorzy:
Lewandowski, A.
Wiatr, W.
Powiązania:
https://bibliotekanauki.pl/articles/307779.pdf
Data publikacji:
2005
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
on-wafer measurements
multimode propagation
error analysis
conductor-backed coplanar waveguide (CB-CPW)
microstrip-like mode
numerical electromagnetic analysis
on-wafer probe
calibration
de-embedding
monolithic microwave integrated circuit (MMIC)
Opis:
We study for the first time errors in on-wafer scattering parameter measurements caused by the parasitic microstrip-like mode propagation in conductor-backed coplanar waveguide (CB-CPW). We determine upper bound for these errors for typical CPW devices such as a matched load, an open circuit, and a transmission line section. To this end, we develop an electromagnetic-simulations-based multimode three-port model for the transition between an air-coplanar probe and the CB-CPW. Subsequently, we apply this model to examine errors in the device S parameters de-embedded from measurements affected by the parasitic MSL mode. Our analysis demonstrates that the multimode propagation in CB-CPW may significantly deteriorate the S-parameters measured on wafer.
Źródło:
Journal of Telecommunications and Information Technology; 2005, 2; 16-22
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
FE analysis of electromagnetic circuit of a written pole motor
Autorzy:
Antczak, M.
Kapelski, D.
Siwiec, J.
Szeląg, W.
Powiązania:
https://bibliotekanauki.pl/articles/97291.pdf
Data publikacji:
2013
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
written pole motors
magnetic hysteresis
coupled phenomena
Opis:
The structure and working principle of a written pole motor are presented. To the analysis of the motor, a field-circuit model of electromagnetic phenomena that takes into account magnetic hysteresis of magnetically hard materials is applied. The motion of the rotor, non-linear properties of magnetically soft materials, and eddy currents induced in the conductive massive materials are taken into account. To solve the equations of the proposed model, the finite edge element method and step-by-step algorithm are used. The elaborated method and software are applied to the analysis of the written pole motor.
Źródło:
Computer Applications in Electrical Engineering; 2013, 11; 168-175
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Statistical analysis of electromagnetic interference between AC traction current and track circuits
Autorzy:
Gavrilyuk, V.
Zavgorodnyj, A.
Powiązania:
https://bibliotekanauki.pl/articles/393429.pdf
Data publikacji:
2010
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
kompatybilność elektromagnetyczna
prąd trakcyjny
prąd zmienny
AC
obwód torowy
electromagnetic compatibility
traction current
track circuit
Opis:
The statistical analysis of traction current harmonics in rail circuits has been provided with the aim to develop statistical evaluation methods of electromagnetic compatibility between the AC traction current and rail circuits.
Źródło:
Archives of Transport System Telematics; 2010, 3, 4; 14-18
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polowa analiza siłowników elektromagnetycznych i transformatorów
Field analysis of electromagnetic actuators and transformers
Autorzy:
Tomczuk, B.
Koteras, R.
Waindok, A.
Zimon, J.
Powiązania:
https://bibliotekanauki.pl/articles/157315.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
logika wielowartościowa
enkoder
multi-valued logic
encoder
Opis:
W artykule zamieszczono wybrane wyniki badań siłowników o ruchu liniowym i nowoczesnych transformatorów. Przedstawiono zarówno modele fizyczne analizowanych obiektów, jak i ich modele matematyczne. Praca zawiera wyniki obliczeń rozkładu pola magnetycznego oraz jego parametrów całkowych dla nowoczesnego siłownika liniowego do badań zmęczeniowych, dla siłownika łożyska magnetycznego oraz transformatora z rdzeniem z blach amorficznych. Prototypy wymienionych obiektów charakteryzują się parametrami spełniającymi wymagania przyszłych użytkowników. Należy także podkreślić dobrą zgodność wyników obliczeń i pomiarów.
Selected investigation results of linear actuators and modern transformers are presented in the paper. Both, physical and mathematical models of the analysed objects are shown. There are given results of calculating the magnetic field distribution and its integral parameters for three objects: a modern linear actuator for fatigue tests, a magnetic bearing actuator and amorphous core transformer. The prototypes of the mentioned objects are characterised by parameters which fulfill the future user's needs. One should underline good conformity of the calculation and measurement results. In the introduction (Section 1), the up-to-date information on linear actuators [2, 3, 4, 5, 6, 7, 8] and transformers [1, 9, 10 11] is given. In Section 2 numerical models of the analysed objects are described. In all cases the finite element method was used [12, 13, 14, 15]. The next three sections include the calculation results and measurement verification for: the linear actuator for fatigue tests (Section 3), the magnetic bearing actuator [16, 17] (Section 4) and the amorphous core transformer [18] (Section 5).
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 3, 3; 264-268
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved algorithm for periodic steady-state analysis in nonlinear electromagnetic devices
Autorzy:
Sobczyk, T. J.
Radzik, M.
Powiązania:
https://bibliotekanauki.pl/articles/201260.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electromagnetic devices
steady-state analysis
periodic solutions
analysis in time domain
discrete differential operator
iterative algorithms
Opis:
This paper presents the improved methodology for the direct calculation of steady-state periodic solutions for electromagnetic devices, as described by nonlinear differential equations, in the time domain. A novel differential operator is developed for periodic functions and the iterative algorithm determining periodic steady-state solutions in a selected set of time instants is identified. Its application to steady-state analysis is verified by an elementary example. The modified algorithm reduces the complexity of steady-state analysis, particularly for electromagnetic devices described by high-dimensional nonlinear differential equations.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 5; 863-869
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza zaburzeń elektromagnetycznych generowanych przez pojazdy szynowe
Analysis of Electromagnetic Disturbances Generated by Rolling Stocks
Autorzy:
Łuszcz, J.
Buława, M.
Powiązania:
https://bibliotekanauki.pl/articles/215279.pdf
Data publikacji:
2015
Wydawca:
Instytut Kolejnictwa
Tematy:
kompatybilność elektromagnetyczna
pojazdy szynowe
emisja przewodzona
zakłócenia
electromagnetic compatibility
rolling stocks
conducted emission
interferences
Opis:
W artykule scharakteryzowano specyfikę zakłóceń elektromagnetycznych w aplikacjach kolejowych. Opisano metody analizy zaburzeń elektromagnetycznych generowanych przez pojazdy szynowe. Przykładowe wyniki analiz w dziedzinie czasu i częstotliwości porównano z wynikami analizy czasowo-częstotliwościowej, umożliwiającej identyfikację i lokalizację źródeł zaburzeń w pojazdach szynowych. Wskazano możliwe przyczyny zmian poziomów zaburzeń generowanych przez pojazdy szynowe w czasie eksploatacji.
The paper presents the specific character of electromagnetic interference in railway applications. Methods of analysis of electromagnetic disturbances generated by track vehicles have been described. Exemplary results of analyses in time and frequency domain are compared to the results of time – frequency analysis which enable identification and the localization of disturbances sources in track vehicles. The paper indicates possible reasons of changes of levels of generated disturbances by track vehicles in their life cycle.
Źródło:
Problemy Kolejnictwa; 2015, 168; 33-37
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tectonics of the northern Carpathians basement in the light of electromagnetic and gravity data analysis
Autorzy:
Stefaniuk, Michał
Cygal, Adam
Powiązania:
https://bibliotekanauki.pl/articles/24202100.pdf
Data publikacji:
2023
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
Carpathians
tectonics
analysis
Opis:
The northern part of the Carpathians covers the north-eastern area of the Western and north-western of the Eastern Carpathians. The basement of the Carpathians in this zone is of a transitional nature and is relatively poorly explored, which results from its deep burial, in particular under the so-called Outer Carpathians. The interpretation of the tectonics and geodynamics of the basement depends to a large extent on the analysis of large scale geophysical data. In this area, regional seismic surveys were carried out mainly using the so-called deep refraction and numerous geophysical works using gravity, magnetic, geomagnetic and magnetotelluric methods. The subject of the presented work is a review of the regional image of electromagnetic and gravity studies carried out in this area, with particular emphasis on the territory of Poland, within which the authors carried out numerous research works. Electromagnetic research allows for the construction of a regional model of basement resistivity distributions and the determination of general outlines of its geometry as well as the formulation or testing of the concept of its geodynamical interpretations. An auxiliary role in this aspect is played by gravity data allowing to recognize the density distribution of the basement and constituting a set of additional data for integrated interpretation. The area outside the territory of Poland was presented on the basis of literature data, creating an extensive regional background for the results of research related with the participation of the authors in Poland. Within the Polish Carpathians, there is a structural reconstruction of the Carpathian overthrust and its basement, as well as a clear change in the nature of geophysical fields, e.g. the system of gravity field anomalies. Due to the deep burial of the Carpathian overthrust in this area and the complex structure of the orogen, which hinder effective drilling penetration, its fragmentary and uncertain recognition is based mainly on geophysical surface studies. The complex structure of the orogen reduces the effectiveness of the use of the seismic reflection method, the participation of which is limited in practice to the recognition of the basement in the marginal zone of the Carpathian overthrust. In the remaining area, alternative methods of surface geophysics are used, i.e. the magnetotelluric and gravity method. An important role in recognizing the basement of the Eastern part of the Polish Carpathians was played by magnetotelluric soundings that cover the above mentioned area with a relatively dense network of several generations of measurement points. The results of the interpretation of the MT soundings were used to construct a resistivity model, which was verified by new results of regional processing of seismic data and magnetotelluric and gravity modelling. The visualization of resistivity distributions was presented through maps interpreted at selected depth levels and in the resistivity cross-sections form. Resistivity distributions are the basis for interpreting tectonic zones marked as resistivity contrasts. Forward modelling and inversion of gravity data were used to verify resistivity structural models.
Źródło:
Geotourism / Geoturystyka; 2023, 1-2 (72-73); 67--67
1731-0830
Pojawia się w:
Geotourism / Geoturystyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza obwodu elektromagnetycznego silnika o biegunach wpisywanych
Analysis of electromagnetic circuit of written pole motor
Autorzy:
Antczak, M.
Kapelski, D.
Siwiec, J.
Szeląg, W.
Powiązania:
https://bibliotekanauki.pl/articles/376711.pdf
Data publikacji:
2013
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
silnik o biegunach wpisywanych
obwód elektromagnetyczny
metoda elementów skończonych krawędziowych
algorytm kolejnych kroków czasowych
Opis:
Przedstawiono budowę i zasadę działania silników o biegunach wpisywanych. Do analizy silnika zaproponowano dwuwymiarowy połowy model zjawisk elektromagnetycznych uwzględniający histerezę magnetyczną materiałów magnetycznie twardych. W rozważaniach uwzględniono ruch wirnika, nieliniowe właściwości materiałów magnetycznie miękkich oraz prądy wirowe indukowane w elementach masywnych przewodzących. Do rozwiązania równań modelu wykorzystano metodę elementów skończonych krawędziowych oraz algorytm kolejnych kroków czasowych. Opracowaną metodę oraz oprogramowanie wykorzystano do analizy silnika o biegunach wpisywanych.
In the paper an electric motor with written poles has been presented. To the analysis of electromagnetic and mechanical motion phenomena in the motor the field-circuit model has been proposed. In the consideration the magnetic hysteresis of permanent magnet material has been taken into account. The numerical implementation of proposed model is based on the FEM and a step-by-step algorithm. Elaborated method and software has been applied to the analysis of written pole motor. Chosen results of analysis of electromagnetic circuit of a written pole motor have been presented.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2013, 75; 17-24
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies