Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Szwast, M." wg kryterium: Wszystkie pola


Tytuł:
Modelling the gas flow in permeate channel in membrane gas separation process
Autorzy:
Szwast, M.
Powiązania:
https://bibliotekanauki.pl/articles/185832.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas separation
perfect mixing
Peclet number
CFD
separacja gazów
mieszanie
Opis:
This paper analyses the real behaviour of the fluid in the channels of a three-end membrane module. The commonly accepted mathematical model of membrane separation of gas mixtures in such modules assumes a plug flow of fluid through the feed channel and perfect mixing in the permeate channel. This article discusses the admissibility of accepting such an assumption regarding the fluid behaviour in the permeate channel. Throughout analysis of the values of the Péclet number criterion, it has been demonstrated that in the industrial processes of membrane gas separation, the necessary conditions for the perfect mixing in the permeate channel are not met. Then, CFD simulations were performed in order to establish the real fluid behaviour in this channel. It was proved that in the permeate channel the fluid movement corresponds to the plug flow, with the concentration differences at both ends of the module being insignificant. In view of the observations made, the admissibility of concentration stability assumptions in the mathematical models for the permeate channel was discussed.
Źródło:
Chemical and Process Engineering; 2018, 39, 3; 271--280
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opracowanie nowej immobilizowanej membrany ciekłej do rozdziału składników gazowych
Development of a new immobilized liquid membrane for separation of gaseous components
Autorzy:
Szwast, M.
Powiązania:
https://bibliotekanauki.pl/articles/2072179.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
membrany
SLM
separacja gazów
membranes
gas separation
Opis:
W pracy wykonano i przebadano własną membranę immobilizowaną(SLM) zbudowaną z mikroporowatej membrany polipropylenowej i oleju silikonowego. W tym celu opracowano metodę uzyskiwania modułów membranowych zawierających membrany SLM. Przeprowadzono badania z użyciem gazów 02, N2 i C02. Uzyskane wyniki wskazują, że tego typu membrana charakteryzuje się dużymi przepuszczalnościami, ale jednocześnie dość niskimi współczynnikami separacji.
In this paper the authors' own SLM membrane is presented. For the purpose of this work a new immobilized membrane was prepared using a micropo- rous polypropylene membrane and silicone oil. A new method for obtaining such membrane modules was developed. Tests were conducted using such gases as 02, N2 and C02. The obtained results indicate that this type of mem-brane is characterized by large permeability factors but also by quite small separation factors.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 485--486
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie procesu rozdzielania mieszanin gazowych z udziałem płaskich nieporowatych membran polimerowych
Mathematical modeling of gas mixtures separation using flat dense polymeric membranes
Autorzy:
Szwast, M.
Szwast, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2072130.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
membrany
separacja gazów
modelowanie matematyczne
membranes
gas separation
mathematical modeling
Opis:
W pracy przedstawiono własny model matematyczny procesu separacji składników gazowych przy użyciu płaskiej nieporowatej membrany polimerowej. Model opisuje proces rozdziału dwóch składników gazowych przy udziale gazowego składnika odbierającego po drugiej stronie membrany. Zaprezentowano równania różniczkowe opisujące przebieg tego procesu, a także przedstawiono przykładowe wyniki obliczeń numerycznych dla rozdziału mieszaniny CH4 i CO2 (wzbogacanie biogazu) przy użyciu membrany wykonanej z PDMS.
The paper presents the authors' own mathematical model of gas separation using a flat dense polymeric membrane. The model describes a separation process of two gaseous components with the presence of third gaseous component as a receiver on the other side of the membrane. Differential equations describing this process as well as some exemplary numerical calcula¬tion for the separation of CH4 and CO2 mixture (biogas enrichment) using a membrane made of PDMS are presented in the paper.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 6; 575--576
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mikrofiltracja z podawaniem nadawy płynącej wraz z pęcherzykami powietrza
Microfiltration with the feed containing air bubbles
Autorzy:
Szwast, M.
Szwast, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2073048.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
mikrofiltracja
nadawa trójfazowa
microfiltration
three-phase feed
Opis:
Zbadano krzyżowy układ mikrofiltracyjny do zagęszczania zawiesin rozdrobnionego ciała stałego w cieczy zasilany nadawą płynącą wraz z pęcherzykami powietrza. Nie stwierdzono wpływu pęcherzyków na przebieg procesu, co oznacza, że pozytywne oddziaływanie pęcherzyków przejawiające się w zmywaniu osadu i negatywne przejawiające się w blokowaniu przez pęcherzyki dostępu cieczy do części powierzchni membrany, wzajemnie znoszą się. Wykazano też, że literaturowa zależność strumienia permeatu od stężenia zawiesiny dla nadawy dwufazowej jest aktualna także dla nadawy trójfazowej.
Cross-flow microfiltration used for concentrating solid particles suspension with the addition of gas bubbles in the feed was investigated. The impact of gas bubbles on microfiltration process was not observed. This means that the positive impact of gas bubbles manifested in deposit washing from the membrane surface and the negative impact exhibited by blocking the liquid access to the membrane surface, cancel each other. It was proven that the literature relationship between permeate flow and suspension concentration for the two-phase feed is valid also for the three-phase feed.
Źródło:
Inżynieria i Aparatura Chemiczna; 2016, 2; 80--81
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical interpretation of a mathematical model of membrane gas separation with energy transfer by gas flowing in a channel to gas penetrating this channel from the adjacent channel
Autorzy:
Szwast, M.
Szwast, Z.
Powiązania:
https://bibliotekanauki.pl/articles/185839.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas separation
membrane
mathematical model
separacja gazów
membrana
model matematyczny
Opis:
Comparative calculations with a mathematical model designed by the authors, which takes into consideration energy transfer from gas flowing through a given channel to gas which penetrates this channel from an adjacent channel, as well as a model which omits this phenomenon, respectively, were made for the process of separating gas mixtures carried out with an inert sweep gas in the fourend capillary membrane module. Calculations were made for the process of biogas separation using a PMSP polymer membrane, relative to helium as the sweep gas. It was demonstrated that omitting the energy transfer in the mathematical model might lead to obtaining results which indicate that the capacity of the process expressed by the value of feed flux subjected to separation is by several percent higher than in reality.
Źródło:
Chemical and Process Engineering; 2018, 39, 2; 209--222
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Mathematical Model of Membrane Gas Separation with Energy Transfer by Molecules of Gas Flowing in a Channel to Molecules Penetrating this Channel from the Adjacent Channel
Autorzy:
Szwast, M.
Szwast, Z.
Powiązania:
https://bibliotekanauki.pl/articles/185043.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
membrane
membrane module
reciprocal transfer of energy between gas molecules
changes of the pressure of gas along the length of flow channel
membrana
wzajemne przekazywanie energii między cząsteczkami gazu
zmiany ciśnienia gazu na długości kanału przepływowego
Opis:
The paper presents the mathematical modelling of selected isothermal separation processes of gaseous mixtures, taking place in plants using membranes, in particular nonporous polymer membranes. The modelling concerns membrane modules consisting of two channels – the feeding and the permeate channels. Different shapes of the channels cross-section were taken into account. Consideration was given to co-current and counter-current flows, for feeding and permeate streams, respectively, flowing together with the inert gas receiving permeate. In the proposed mathematical model it was considered that pressure of gas changes along the length of flow channels was the result of both – the drop of pressure connected with flow resistance, and energy transfer by molecules of gas flowing in a given channel to molecules which penetrate this channel from the adjacent channel. The literature on membrane technology takes into account only the drop of pressure connected with flow resistance. Consideration given to energy transfer by molecules of gas flowing in a given channel to molecules which penetrate this channel from the adjacent channel constitute the essential novelty in the current study. The paper also presents results of calculationsobtained by means of a computer program which used equations of the derived model. Physicochemical data concerning separation of the CO2/CH4 mixture with He as the sweep gas and data concerning properties of the membrane made of PDMS were assumed for calculations.
Źródło:
Chemical and Process Engineering; 2015, 36, 2; 151-169
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wzbogacanie gazu ziemnego – model numeryczny membranowego rozdziału składników gazowych
Natural gas upgrading - mathematical model of membrane gas separation
Autorzy:
Szwast, M.
Sobczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/2072984.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
modelowanie
membranowa separacja gazów
gaz ziemny
modelling
membrane gas separation
natural gas
Opis:
Przedstawiono model pojedynczej kapilary membranowej, na której zachodzi separacja mieszaniny gazowej. Symulacje przeprowadzono w programie Comsol Multiphysics, który wykorzystuje metodę elementów skończonych do aproksymacji rozwiązań układów równań różniczkowych. Model matematyczny oparto na równaniu Naviera-Stokesa i równaniu ciągłości oraz równaniu konwekcji i dyfuzji składnika z uwzględnieniem modelu rozpuszczalnościowo-dyfuzyjnego dla transportu składnika przez membranę nieporowatą. Przedstawiono przykładowe wyniki symulacji dla rozdziału metanu i dwutlenku węgla.
The single membrane capillary model of gas separation is presented. Some simulations were performed in Comsol Multiphysics software that uses the finite element method to approximate solution of the differential equations’ systems. The mathematical model is based on the Navier-Stokes equation, continuity equation, diffusion and convection equation including the solution-diffusion model of gas transport through nonporous membrane. Some exemplary results of simulations are also presented.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 4; 302--303
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary studies on integrated process of microfiltration and photocatalysis used in laundry wastewater treatment
Badania wstępne nad zintegrowanym procesem mikrofiltracji i fotokatalizy stosowanym do oczyszczania ścieków pralniczych
Autorzy:
Polak, D.
Szwast, M.
Powiązania:
https://bibliotekanauki.pl/articles/297597.pdf
Data publikacji:
2018
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
integrated process
microfiltration
photocatalysis
laundry wastewater
proces zintegrowany
mikrofiltracja
fotokataliza
ścieki pralnicze
Opis:
Industrial laundries generate wastewater in very large quantities. This wastewater is characterized by a high value of chemical oxygen demand (COD) and it contains substances suspended in the liquid that are responsible for wastewater turbidity. Furthermore, wastewater from industrial laundries contains several grams of detergents per litre of washing substances, mostly surfactants. Environmental and legal requirements force factories, including industrial laundries, to look for new and cost-effective methods of wastewater treatment. In the case of wastewater from industrial laundries, it is also important that a treatment method involves closing of the water loop in the plant and allows the plant to recover some of the detergents to be reused in another washing cycle. In order to address the problems related to wastewater from industrial laundries, the authors proposed an integrated process, which combined microfiltration and photocatalytic oxidation. This study presents preliminary results of the research carried out on actual wastewater generated in an industrial laundry. Results demonstrated the possibility of recovery of large amounts of purified water with detergents for the subsequent washing cycles. Thus, the integrated system of microfiltration and photocatalysis can be used in the technology of recovering water and detergents from industrial laundries. This technology enables to eliminate turbidity and remove some detergents associated with contamination caused by washing processes. Furthermore, purification degree is sufficient to reuse water in the pre-wash cycle.
Ścieki w pralniach przemysłowych produkowane są w bardzo dużych ilościach. Ścieki te charakteryzują się dużą wartością parametru ChZT (Chemiczne Zapotrzebowanie Tlenu), zawierają substancje zawieszone w cieczy i odpowiedzialne za mętność tych ścieków. Ponadto w ściekach z pralni przemysłowych znajdują się znaczne ilości (do kilku gramów w litrze) środków piorących, w szczególności środków powierzchniowo czynnych. Wymagania środowiskowe i prawne zmuszają zakłady, w tym pralnie przemysłowe, do poszukiwania nowych, oszczędnych metod oczyszczania ścieków. W przypadku ścieków z pralni przemysłowych istotne jest również to, aby metoda oczyszczania uwzględniała zamknięcie obiegu wody w zakładzie i pozwalała na odzysk przynajmniej części detergentów i ich użycie w kolejnym cyklu prania. Do rozwiązania tak postawionego problemu wobec ścieków pochodzących z pralni przemysłowych autorzy zaproponowali zastosowanie zintegrowanego procesu, w skład którego wchodzi mikrofiltracja oraz utlenianie fotokatalityczne. Praca przedstawia wstępne wyniki badań prowadzonych na rzeczywistych ściekach powstałych w pralni przemysłowej. Wyniki wskazują na możliwość zawrócenia dużych ilości oczyszczonej wody wraz z detergentami do kolejnych cyklów pralniczych. Zatem zintegrowany system złożony z procesu mikrofiltracji i fotokatalizy może zostać wykorzystywany w technologii odzyskiwania wody i detergentów z pralni przemysłowych. Technologia ta umożliwia całkowite usunięcie mętności oraz części detergentów związanych z zanieczyszczeniami z prania. Dodatkowo stopień oczyszczenia jest wystarczający, by ponownie wykorzystać wodę do prania wstępnego.
Źródło:
Inżynieria i Ochrona Środowiska; 2018, 21, 2; 163-170
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie wpływu parametrów procesowych na jakość i wielkość odzysku wody ze ścieków pralniczych
Investigation into the influence of process parameters on quality and quantity of water obtained from laundry wastewater
Autorzy:
Szwast, Z.
Polak, D.
Szwast, M.
Powiązania:
https://bibliotekanauki.pl/articles/2073322.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
oczyszczanie ścieków pralniczych
mikrofiltracja
jakość permeatu
laundry wastewater treatment
microfiltration
permeate quality
Opis:
Mikrofiltracja pozwala na oczyszczenie ścieków pralniczych z zanieczyszczeń oraz odzysk części środków piorących i zawrócenie oczyszczonej wody do prania wstępnego w kolejnym cyklu pralniczym. Praca przedstawia ocenę wpływu parametrów procesowych, takich jak ciśnienie nadawy i strumień retentatu na szybkość powstawania permeatu i jego jakość. Zauważono, że jednoczesne uzyskanie dużych strumieni permeatu i wysokiej jakości permeatu jest niemożliwe. Praca wskazuje problem optymalizacyjny pozwalający na wybór, w określonych warunkach, optymalnego przepływu permeatu i optymalnej jego jakości.
Microfiltration is a method for laundry wastewater treatment. It helps to remove impurities as well as to recover some detergents and to return purified water for prewashing in the next washing cycle. This work focuses on the assessment of impact of process parameters such as feed pressure and reténtate flow on the permeate flux and its quality. It was noticed that it is impossible to obtain simultaneously high permeate flux and high quality of permeate. The work indicates an optimization issue that allows the selection, in certain conditions, of optimal permeate flux and its optimal quality.
Źródło:
Inżynieria i Aparatura Chemiczna; 2018, 5; 156--157
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New composite polymer membranes for biogas separation
Autorzy:
Bojarska, M.
Szwast, M.
Piątkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/115604.pdf
Data publikacji:
2011
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
biogas
gas separation
membranes for gas separation
Opis:
Biogas can be used as an alternative energy source. Unfortunately presence of carbon dioxide in a composition of biogas makes compression and transportation difficult. In addition CO2 makes biogas lower calorific. That is why new methods for carbon dioxide separation from biogas are to be explored. Obtained results for polypropylene membranes modifications by polydimethylosiloxanes are presented in this paper.
Źródło:
Challenges of Modern Technology; 2011, 2, 1; 65-68
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A New Method for Assessing Haemolysis in a Rotary Blood Pump Using Large Eddy Simulations (LES)
Autorzy:
Szwast, M.
Moskal, A.
Piątkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/185020.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rotary blood pump
large eddy simulations
haemolysis
obrotowa pompa krwi
duże symulacje wirów
hemoliza
Opis:
The opportunity to assess haemolysis in a designed artificial heart seems to be one of the most important stages in construction. We propose a new method for assessing haemolysis level in a rotary blood pump. This method is based on CFD calculations using large eddy simulations (LES). This paper presents an approach to haemolysis estimation and shows examples of numerical simulation. Our method does not determine the value of haemolysis but allows for comparison of haemolysis levels between different artificial heart constructions.
Źródło:
Chemical and Process Engineering; 2017, 38, 2; 231-239
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Membrany polipropylenowe modyfikowane kopolimerem PEBA w filtracji ścieków z pralni przemysłowych
PEBA copolymer modified polypropylene membranes used in filtration of laundry wastewater
Autorzy:
Polak, D.
Kucharska, K.
Szwast, M.
Powiązania:
https://bibliotekanauki.pl/articles/2073273.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
membrany polipropylenowe
kopolimer PEBA
filtracja
ścieki popralnicze
polypropylene membranes
PEBA copolymer
filtration
post-laundry wastewater
Opis:
Przedstawiono wstępne badania nad opracowaniem nowej membrany do zastosowania w procesach oczyszczania wód popralniczych oraz odzyskiwania z nich detergentów. Nowa membrana uzyskiwana jest poprzez modyfikację membrany polipropylenowej metodą flow coating. Przedstawiono wpływ wybranych para metrów procesu flow coating (prędkość przepływu roztworu wzdłuż membrany oraz czas kontaktu roztwór-membrana) na właściwości filtracyjne membrany. Wstępne badania potwierdziły, że zastosowana metoda pozwala na nadanie membranie nowych właściwości filtracyjnych.
The work presents initial studies on the development of a new type of membrane for post-laundry water treatment processes and for detergent recovery from this type of wastewater. The new membrane is prepared by the modification of polypropylene membrane using the flow coating method. The paper shows an influence of selected parameters of the flow coating process (solution flow rate along the membrane and solution-membrane contact time) on the membrane filtration properties. The initial studies confirmed that the new membrane filtration properties can be obtained using this method.
Źródło:
Inżynieria i Aparatura Chemiczna; 2017, 3; 100--101
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical model for biological cell deformation in a cylindrical pore
Autorzy:
Szwast, M.
Suchecka, T.
Piątkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/185778.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
deformacja komórek
czerwone krwinki
cell deformation
red blood cell
cell stamina
Opis:
Some studies show that cells are able to penetrate through pores that are smaller than cell size. It concerns especially Red Blood Cells but it also may concern different types of biological cells. Such penetration of small pores is a very significant problem in the filtration process, for example in micro or ultrafiltration. Deformability of cells allows them to go through the porous membrane and contaminate permeate. This paper shows how cells can penetrate small cylindrical holes and tries to assess mechanical stress in a cell during this process. A new mathematical approach to this phenomenon was presented, based on assumptions that were made during the microscopic observation of Red Blood Cell aspiration into a small capillary. The computational model concerns Red Blood Cell geometry. The mathematical model allows to obtain geometrical relation as well as mechanical stress relations.
Źródło:
Chemical and Process Engineering; 2012, 33, 3; 385-396
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of postproduction suspensions’ concentration processes by “batch” membrane microfiltration
Autorzy:
Szwast, M.
Szwast, Z.
Grądkowski, M.
Piątkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/185409.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
microfiltration
mathematical modeling
membrane processes
filtration pseudocycles
postproduction suspension
mikrofiltracja
modelowanie matematyczne
proces membranowy
postprodukcja
Opis:
The mathematical model of postproduction suspension concentration by microfiltration has been developed. This model describes a process conducted in a batch system with membrane washing by reverse flow of permeate. The model considerations concern filtration pseudocycles consisting of the filtration period and the membrane washing period. The balances of continuous phase volume, dispersed phase mass and energy, for each period of pseudocycle respectively, have been presented.
Źródło:
Chemical and Process Engineering; 2013, 34, 3; 313-325
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie membran ceramicznych do rozdziału mieszanin wody i oleju - badania laboratoryjne i opis matematyczny procesu
Application of ceramic membranes in separation of water/oil mixtures - laboratory-scale research and mathematical description of the process
Autorzy:
Szwast, M.
Nikpour, R.
Szwast, Z.
Piątkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/2071864.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
emulsja
olej Diesla
membrany
mikrofiltracja
emulsion
diesel oil
membranes
microfiltration
Opis:
W pracy przedstawiono wyniki modelowania matematycznego procesu mi- krofiltracyjnego zagęszczania emulsji olej Diesla - woda. Przedstawiono również wyniki badań laboratoryjnych. Uzyskano wysoką zgodność między równaniami modelowymi a uzyskanymi wynikami doświadczeń.
A mathematical model of Diesel oil - water emulsion concentration process by microfiltration is presented in the paper. In addition, laboratory test results are shown. A high accuracy between the model equations and experimental results was obtained.
Źródło:
Inżynieria i Aparatura Chemiczna; 2012, 6; 391-393
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies