Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "weighting" wg kryterium: Temat


Wyświetlanie 1-11 z 11
Tytuł:
Optymizm a prawidłowości percepcyjne przy ważeniu prawdopodobieństwa
Optimism/Pesimism and the Probability Weighting Function
Autorzy:
Sokołowska, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/468708.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Filozofii i Socjologii PAN
Tematy:
optimistic predictions
probability weighting function
configural weighting
dispositional optimism
Opis:
The main question of the presented experiments has been whether the probability weighting function (Kahneman, Tversky, 1979) and configural weighting incorporated in the CPT model (Tversky & Kahneman, 1992) can account for the overweighting of positive outcomes and underweigthing of negative outcomes, the phenomena first observed in the 50−ties (Irwin, 1953; Marks, 1951; – Marks-Irwin effect) and called unrealistic optimism in the current literature. In Experiment 1, carried out with 133 students, the relations between expectations of success, weights attributed to positive and 0 outcomes and the objective frequency of such outcomes were investigated in a skill situation, i. e. a competition for the best student paper. It was found that: (1) expectations of success depended strongly on the objective frequency of prizes, (2) the best outcomes were weighted in agreement with predictions of the CPT model, but (3) the same was not true for the worst outcome, i. e. 0. The results, however, could not be easily generalised because the situation was constructed such that no negative outcomes were present and 0 outcome was always the most probable. To extend studies to lotteries with negative outcomes and wider range of probabilities an additional experiment was carried out. In Experiment 2 284 students made choices between 10 pairs of 5-outcome mixed lotteries. These lotteries were constructed such the absolute utilities (calculated from CPT) of positive and negative outcomes were equal, and positive and negative outcomes had the same probabilities of occurrence. According to CPT, such lotteries should be always rejected. because negative outcomes are weighted more heavily, yielding negative overall CPT values of the lotteries. The results, however, did not support such predictions – the acceptance rate was close to 1/ . In general, the binominal distribution of acceptance of gambles with negative CPT values might suggest that some people assign optimistic weights to outcomes, i. e. overweight probabilities of positive outcomes and underweight probabilities of negative outcomes. In particular, individual differences in dispositional optimism (measured with the LOT scale) can reinforce such tendency.
Źródło:
Prakseologia; 2006, 146; 65-88
0079-4872
Pojawia się w:
Prakseologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nielojalne szable? O badaniu zaplecza prezydenta miasta in spe za pomocą zmodyfikowanej metody AHP
Disloyal followers? About the study on political base of the mayor in spe using modified method of AHP
Autorzy:
Drzonek, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/514435.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Śląski. Wydział Nauk Społecznych
Tematy:
mayor
political preferences
AHP
method of weighting the selection preferences
local elections
Opis:
The article contents some results of research on political preferences of candidates for City Council in Szczecin. The survey was done just before the 2014 local elections. In the survey’s results published in this paper, the main object was to determine the relation of candidates for councilors to competition for the mayor of Szczecin. The analysis is focused on the issues of mayor’s potential attributes such as: previous achievements, personal competence, image, party affiliation and program for action in future. Moreover the concentration was also done on preferences of mayor’s candidates: it was very interesting to compare answers on the question who would be better mayor of Szczecin. In the research the modified Analytic Hierarchy Process methods was used. Firstly, the modification, called the method of weighting the selection preferences, showed Piotr Krzystek (mayor of Szczecin since 2006) as a most preferred pretender in 2014 - the majority of party electoral committees recognized him as a second choice candidate. Secondary, each electoral committee had disloyal followers.
Źródło:
Political Preferences; 2016, 12; 57-71
2449-9064
Pojawia się w:
Political Preferences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania możliwości zastąpienia barytu kredą w obciążonej płuczce poliglikolowej z polimerem PT-51 do przewiercania skał ilastych
Barite replacement with chalk in weighted polyglycol drilling mud with PT-51 polymer to drilling in clays and shales - lab research
Autorzy:
Kopeć, P.
Wysocki, S.
Powiązania:
https://bibliotekanauki.pl/articles/300495.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
płuczki wiertnicze
materiały obciążające
baryt
kreda
drilling muds
weighting agents
barite
chalk
Opis:
Prawidłowe obciążenie płuczki jest bardzo ważne dla procesu wiercenia, aby zrównoważyć ciśnienia złożowe oraz wywierać przeciwciśnienie na ściany otworu. W przypadku niewłaściwie dobranej płuczki wiertniczej do przewiercania skał ilastych obserwuje się efekt "płynięcia skał". Aby temu zapobiegać stosuje się płuczki o podwyższonej gęstości. Stosowane do obciążania płuczek materiały powinny być obojętne chemicznie względem składników płuczki oraz nie powinny wpływać znacząco na parametry technologiczne, dodatkowo, ze względu na duże zużycie, powinny być łatwodostępne oraz tanie. W niniejszej pracy przebadano możliwość zastąpienia barytu kredą w obciążonej płuczce poliglikolowej do przewiercania skał ilastych. Przeprowadzone badania wykazały, że użycie kredy i barytu w skomponowanej płuczce poliglikolowej skutecznie obciąża płuczkę do gęstości 1,5 g/cm3, bez znaczącego wpływu na parametry reologiczne. Kreda wpływa podobnie jak baryt na parametry technologiczne, przy czym posiada mniejsze właściwości ścierne i jest tańsza od barytu.
The right weighting of drilling mud is very important for drilling to balance well pressure and exert back pressure to the walls. In instance to wrong match of drilling mud, there is a crawling rocks effect. In order to prevent this effect, drilling mud with high density are use. Materials which we use to weighting should be a chemical inertness to other components of mud and don't change of technological parameters. Because of high consumption it also should be easily accessible and cheap. In this work we research for replacement barite by chalk in weighted polyglycol drilling mud to reboring clays and shales. Research show that using a chalk and barite on prepared mud successfully weight it to density of 1.5 g/cm3 without significant influence of rheological parameters. Chalk influence similarly like barite at technological parameters and have lower abrasiveness and it's cheaper than barite.
Źródło:
Wiertnictwo, Nafta, Gaz; 2010, 27, 1--2; 217-223
1507-0042
Pojawia się w:
Wiertnictwo, Nafta, Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozszerzony algorytm PID dla przemysłowego regulatora temperatury z samostrojeniem
Extended PID algorithm for industrial temperature controller with self-tuning
Autorzy:
Świder, Z.
Trybus, L.
Powiązania:
https://bibliotekanauki.pl/articles/276765.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
algorytm PID
samostrojenie przekaźnikowe
ważona wielkość zadana
PID control
set-point weighting
relay self-tuning
Opis:
Regulator PID z ważoną wielkością zadaną pozwala w pewnym zakresie zmniejszyć przeregulowanie na skokową zmianę wielkości zadanej, jednocześnie nie zmieniając odpowiedzi na zakłócenie (sprowadzone na wejście obiektu). Uzyskuje się to poprzez wprowadzenie „wagi” b w różnicy b W–Y, co ogranicza wpływ wielkości zadanej w torze P regulatora (W oznacza wielkość zadaną, a Y wyjście obiektu). Zmniejszając wartość współczynnika b można ograniczyć lub też całkowicie wyeliminować przeregulowanie w odpowiedzi na skokową zmianę wielkości zadanej W. Jednak dla nastaw regulatora otrzymanych w wyniku samostrojenia przekaźnikowego przy typowym zapasie wzmocnienia i fazy, przeregulowanie występuje nawet dla b=0. W artykule przedstawiono propozycję rozszerzenia algorytmu PID z ważoną wielkością zadaną o filtr pozwalający całkowicie wyeliminować to przeregulowanie.
PID controller with set-point weighting allows to correct set-point response without affecting disturbance response. This is done by means of a factor b in the difference b W–Y which determines proportional action of the controller (W denotes set-point and Y, plant output). By decreasing b one can reduce or even eliminate overshoot of set-point response. It turns out however, that for relay tuning with typical gain and phase margins the overshoot may remain even for b=0. So the paper presents an extension to the set-point weighting approach to eliminate the overshoot completely. Here, in addition to the original modification of proportional action, also the integral action is determined not by the error E but by the difference Wf -W, with Wf generated by a lead-lag filter.
Źródło:
Pomiary Automatyka Robotyka; 2013, 17, 2; 432-435
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prosta metoda aproksymacji funkcji wagowych umożliwiających modelowanie niestacjonarnych oporów hydraulicznych
Simple approximation of unsteady friction weighting function
Autorzy:
Urbanowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/209640.pdf
Data publikacji:
2012
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
numeryczna mechanika płynów
przepływ nieustalony
opory hydrauliczne
funkcja wagi
numerical fluid mechanics
transient flow
hydraulic resistance
weighting function
Opis:
W analizie niestacjonarnego przepływu cieczy zagadnieniem bardzo istotnym jest poprawne i efektywne modelowanie oporów hydraulicznych. W celu modelowania tych oporów rozwiązuje się drogą numeryczną tzw. całkę splotową z chwilowej zmiany prędkości cieczy i funkcji wagi. By obliczenia były efektywne, warunkiem koniecznym jest, by funkcja wagi została zapisana jako skończona suma wyrażeń eksponentalnych. Podczas przepływów laminarnych funkcja wagi zachowuje stały kształt, w turbulentnych natomiast jej kształt jest zmienny i zależny od chwilowej liczby Reynoldsa. W niniejszej pracy przedstawiona została pewna prosta metoda umożliwiająca wyznaczanie poprawnej funkcji wagi w bardzo krótkim czasie.
In transient liquid pipe flow analysis, a very important problem is accurate and effective modelling of hydraulic resistances. In order to simulate unsteady resistances one need to solve, in a numerical way, so-called integral convolution of the mean local acceleration of liquid and a weighting function. In effective numerical calculations, a necessary condition is that the weighting function needs to be defined as a finite sum of exponential terms. In laminar flows, that function keeps a constant shape and in turbulent flows its shape changes in dependence of the instantaneous Reynolds number. In this article, an easy method is presented that enables us to determine proper weighting function very straight forward way in a very short time.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2012, 61, 3; 233-252
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Review of methods for data sets with missing values and practical applications
Autorzy:
Korczyński, Adam
Powiązania:
https://bibliotekanauki.pl/articles/433946.pdf
Data publikacji:
2014
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
missing data pattern
missing data mechanism
complete-case analysis
available-case analysis
single imputation
likelihood-based methods
multiple imputation
weighting methods
Opis:
The aim of this paper is to revise the traditional methods (complete-case analysis, available-case analysis, single imputation) and current methods (likelihood-based methods, multiple imputation, weighting methods) for handling the problem of missing data and to assess their usefulness in statistical research. The paper provides the terminology and the description of traditional and current methods and algorithms used in the analysis of incomplete data sets. The methods are assessed in terms of the statistical properties of their estimators. An example is provided for the multiple imputation method. The review indicates that current methods outweigh traditional ones in terms of bias reduction, precision and efficiency of the estimation.
Źródło:
Śląski Przegląd Statystyczny; 2014, 12(18); 83-104
1644-6739
Pojawia się w:
Śląski Przegląd Statystyczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie wielomianowych powierzchni ruchomych w procesie filtracji danych pochodzących z lotniczego skaningu laserowego
Filtering of airborne laser scanning data using a moving polynomial surface model
Autorzy:
Borkowski, A.
Jóźków, G.
Powiązania:
https://bibliotekanauki.pl/articles/130656.pdf
Data publikacji:
2006
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
skaning laserowy
filtracja
wielomianowa powierzchnia ruchoma
estymacja odporna
funkcja wagowa
funkcja tłumienia
laser scanning
filtering
moving polynomial surface
robust estimation
weighting function
Opis:
Lotniczy skaning laserowy dostarcza punktowej informacji geometrycznej o fizycznej powierzchni ziemi i znajdujących się na niej obiektach. W procesie opracowania danych centralnym zagadnieniem jest identyfikacja punktów należących do odpowiednich powierzchni. W pracy przedstawiono algorytm hierarchicznej identyfikacji punktów należących do powierzchni terenu. Algorytm bazuje na aproksymacji danych pomiarowych metodą ruchomych powierzchni wielomianowych, przy czym parametry powierzchni wyznaczane są z wykorzystaniem estymacji odpornej metodą M-estymatorów. W procesie estymacji wykorzystano asymetryczne funkcje tłumienia. Test algorytmu wykonano na rzeczywistych danych pozyskanych z wykorzystaniem systemu ScaLARS. Dla oceny skuteczności algorytmu wykonano ręczną klasyfikację punktów, posiłkując się skalibrowanym w tym samym układzie zdjęciem lotniczym. Błąd identyfikacji punktów terenowych oszacowano na poziomie około 2 %.
Within recent years, airborne laser scanning has become the leading technology of acquiring discrete geometrical information about ground surface and objects existing on it. The main issue in data processing is the identification and classification of points belonging to the proper surfaces. Thereafter, these points constitute the basis for surface modelling. The problem of classification concerns roofs of buildings and the topographical ground surface. The latter one is the subject of the research in the presented work. The form of an automatic elimination of points not belonging to the modeled surface is called a filtration. Based upon a literature review concerning airborne laser scanning data filtration, the analysis and experience of authors in data processing, the following filtration requirements can be formulated: - if possible, the filtration process should be carried out on the original data, - the algorithm should have the property of suitable conformity to the local terrain structures, - the algorithm should take into consideration additional information a-priori, - due to the very large size of laser scanning data sets, in the order of 106 points, the complexity of the filtration algorithm is important. In the context of above mentioned requirements, the method of moving polynomial surface in the process of airborne laser scanning data filtration was adapted in this work. The small rank polynomial surface was locally fit to the measured data in the iteration process. Parameters of the surfaces were calculated based upon M-estimators of the robust estimation method. In the estimation process, the distance inverse function as the weighting function and the asymmetrical damping function were used. The filtration algorithm was applied using the hierarchical method. The algorithm tests were executed on the real data captured by ScaLARS system. In order to evaluate the correctness of the algorithm, hand points classification using air photos, calibrated in the same coordinate system, was carried out. The terrain points identification accuracy was evaluated on the level of about 2 %. A discussion of results is included and the advantages and defects of the presented algorithm are discussed in the paper. The proposed algorithm is relatively simple, and is based upon the original data and, due to free choice of weighting and damping functions parameters, has properties of suitable approximation of the local terrain structures.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2006, 16; 63-73
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aspekty metrologiczne stosowania normy PN-EN 62471 "Bezpieczeństwo fotobiologiczne lamp i systemów lampowych"
Metrological aspects of application of standard PN-EN 62471 Photobiological safety of lamps and lamp systems
Autorzy:
Pietrzykowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/160021.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
bezpieczeństwo fotobiologiczne lamp
funkcje skuteczności widmowej
klasyfikacja lamp
grupy ryzyka
photobiological safety of lamps
spectral weighting functions
lamp classification
risk groups
Opis:
Sztuczne i naturalne źródła promieniowania optycznego mogą stwarzać poważne fotobiologiczne zagrożenia dla oczu i skóry. Zagrożenia promieniowaniem optycznym od lamp są szacowane zgodnie z PN-EN 62471. W pracy przedstawiono pewne aspekty metrologiczne stosowania normy PN-EN 62471.
Artificial and natural sources of optical radiation may create heavy photobiological hazards for the eye and skin. Optical radiation hazards from lamp are assessed in accordance with PN-EN 62471. In paper some metrological aspects of application PN-EN 62471 are presented.
Źródło:
Prace Instytutu Elektrotechniki; 2012, 255; 45-52
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania laboratoryjne nad zastosowaniem tetratlenku trimanganu jako materiału obciążającego do płuczek wiertniczych
Laboratory studies on the use of trimanganese tetroxide as a weighting material for drilling fluids
Autorzy:
Błaż, Sławomir
Zima, Grzegorz
Jasiński, Bartłomiej
Powiązania:
https://bibliotekanauki.pl/articles/2143335.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
płuczka wiertnicza
materiał obciążający
tetratlenek trimanganu
baryt
osad filtracyjny
współczynnik sedymentacji
drilling mud
weighting material
trimanganese tetroxide
barite
filter cake
sag factor
Opis:
Wiercenie otworów metodą nadciśnieniową wymaga stosowania płuczek wiertniczych o gęstości gwarantującej zrównoważenie ciśnienia złożowego i zapewnienie stabilności otworu. Do zwiększania gęstości płuczek wiertniczych najczęściej wykorzystywane są materiały obciążające takie jak węglan wapnia, baryt, ferrohem, hematyt. W praktyce do obciążania płuczek wiertniczych do dowiercania stosowany jest węglan wapnia CaCO3 z uwagi na jego wysoką rozpuszczalność w kwasie. Jednak zbyt duża koncentracja węglanu wapnia w płuczce wpływa na podwyższenie parametrów reologicznych płuczki oraz związane z tym komplikacje wiertnicze (np. przechwycenie przewodu wiertniczego). Dlatego też do płuczek o wyższej gęstości w celu zmniejszenia ilości materiałów stałych dodawany jest baryt, charakteryzujący się znacznie większą gęstością – 4,2 g/cm3 . Płuczki wiertnicze obciążane barytem w zmiennych warunkach ciśnienia i temperatury narażone są na częste zmiany gęstości, wynikające ze statycznego i dynamicznego osiadania barytu. Podczas wiercenia baryt może także powodować znaczne uszkodzenia formacji złożowych i konieczne jest w związku z tym przeprowadzenie zabiegów stymulacyjnych. Zwiększenie przepuszczalności złoża przeprowadza się między innymi poprzez zabieg kwasowania. Baryt jako materiał obciążający nie reaguje z powszechnie stosowanymi w zabiegach kwasami, co może powodować trwałe uszkodzenie złoża. Stosunkowo nowym rodzajem materiału obciążającego, który wykazuje zupełnie inne właściwości niż standardowy baryt używany do obciążania płuczek jest tetratlenek trimanganu. Materiał ten z uwagi na swoje właściwości wykazuje niewielki wpływ na parametry reologiczne płuczki, łatwo ulega w niej zawieszeniu, a dodatkowo stabilizuje zawiesiny, ograniczając sedymentację zwierconej fazy stałej, co ma znaczenie przy wierceniu otworów kierunkowych. W artykule przedstawiono badania laboratoryjne nad możliwością zastosowania tetratlenku trimanganu Mn3O4 jako środka do regulowania gęstości płuczek przeznaczonych do wiercenia otworów w warunkach wysokiej temperatury i ciśnienia HTHP. Tetratlenek trimanganu jako materiał obciążający może stanowić alternatywę dla barytu, szczególnie w płuczkach wiertniczych stosowanych do wiercenia otworów geotermalnych oraz do dowiercania horyzontów produktywnych. Opracowane płuczki zawierające nowy rodzaj materiału obciążającego charakteryzują się mniejszą tendencją do sedymentacji materiału obciążającego i niższymi parametrami reologicznymi w porównaniu z konwencjonalnymi płuczkami wiertniczymi obciążonymi barytem.
Drilling holes using the overpressure method requires the use of drilling fluids with a density that guarantees the balance of the reservoir pressure and ensures the stability of the hole. Weighting materials such as calcium carbonate, barite, ferrohem, hematite are most often used to increase the density of drilling fluids. In practice, calcium carbonate CaCO3 is used for weighting drilling fluids due to its high acid solubility. However, too high a concentration of calcium carbonate in the drilling fluid increases the rheological parameters of the drilling fluid and the related drilling complications (e.g. interception of the drill string). Therefore, barite with a much higher density of 4.2 kg/m3 is added to higher-density muds to reduce the amount of solids. Drilling muds weighted with barite under changing pressure and temperature conditions are exposed to frequent changes in density resulting from static and dynamic barite sedimentation. During drilling, barite can also cause significant damage to reservoir formations, and it is therefore necessary to carry out stimulation treatments. The permeability of the deposit is increased through, among other things, acidization. Barite as a weighting material does not react with acids commonly used in treatments, which may cause permanent damage to the deposit. A relatively new type of weighting material that exhibits completely different properties compared to the standard barite used for weight drilling muds is trimanganese tetroxide. Due to its properties, this material has little effect on the rheological parameters of the drilling muds, it can be easily suspended in the drilling muds, and in addition it stabilizes the suspensions, limiting sedimentation of the solid phase, which is important when drilling directional holes. The article presents laboratory research on the possibility of using trimanganese tetroxide Mn3O4 as an agent to regulate the density of muds intended for drilling holes in HTHP conditions. Trimanganese tetroxide as a weighting material can be an alternative to barite, especially in drilling fluids used for drilling geothermal holes and drilling productive horizons. The developed muds containing a new type of weighting material are characterized by a lower tendency to cause sedimentation of the weighting material and lower rheological parameters compared to conventional bariteweighted drilling muds.
Źródło:
Nafta-Gaz; 2022, 78, 3; 208-218
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O wpływie metod ważenia na własności szeregów czasowych statystyk bilansowych IRG
The impact of weighting methods on properties of RIED balance series
Autorzy:
Kowalczyk, Barbara
Witkowski, Bartosz
Powiązania:
https://bibliotekanauki.pl/articles/500376.pdf
Data publikacji:
2011
Wydawca:
Szkoła Główna Handlowa w Warszawie
Tematy:
metody ważenia
struktura próby
statystyka bilansowa
badania koniunktury
punkty zwrotne
stacjonarność
test KPSS
weighting methods
sample structure
tendency surveys
turning points
stationarity
KPSS test
Opis:
W artykule przeanalizowano wpływ metod ważenia na własności szeregów czasowych statystyk bilansowych otrzymanych na podstawie badania koniunktury w przemyśle prowadzonego przez IRG SGH. Analizie poddano wszystkie zmienne o trzech wariantach odpowiedzi testowane w badaniu IRG z częstotliwością miesięczną. W przypadku każdego z szeregów przedmiotem analiz był zarówno raportowany stan obecny, jak i prognozy. Zbadano m. in. statystyki opisowe, punkty zwrotne oraz stacjonarność otrzymanych różnymi metodami szeregów sald. Otrzymane wyniki wskazują, że wnioski, jakich dostarcza analiza szeregów uzyskanych różnymi metodami są zbieżne. Przeprowadzone na szerokim zbiorze zmiennych badanie pozwala na stwierdzenie adekwatności zastosowanych przez IRG metod ważenia szeregów, pomimo arbitralności stosowanych wag.
The article examines the impact of weighting methods on the properties of balance series obtained on the basis of business tendency surveys, conducted by RIED WSE. We analyzed all variables with three available variants of answers which are tested in the RIED survey regularly every month. For each variable, both state and expectations were studied. We analyzed, among others, descriptive statistics, turning points and stationarity of the obtained by different methods series. The conclusions that could be drawn from the analysis of balance series obtained with the use of different methods coincide. The analysis that has been carried out with the use of a broad set of variables allows to conclude that despite the arbitrary weights used, series provided by RIED WSE are adequate. Key words: weighting methods, sample structure, tendency surveys, turning points, stationarity, KPSS test.
Źródło:
Prace i Materiały Instytutu Rozwoju Gospodarczego SGH; 2011, 87: Zmiany aktywności gospodarczej w świetle wyników badań koniunktury; 65-85
0866-9503
Pojawia się w:
Prace i Materiały Instytutu Rozwoju Gospodarczego SGH
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Impact of Emotions on Weighting Hedonic and Utilitarian Product Attributes
Wpływ emocji na ważenie hedonistycznych i utylitarnych atrybutów produktów
Влияние эмоций на взвешивание гедонических и утилитарных атрибутов продукта
Autorzy:
Gaczek, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/562297.pdf
Data publikacji:
2018
Wydawca:
Polski Instytut Ekonomiczny
Tematy:
emotions
affect
decision-making
hedonic attributes
utilitarian attributes
weighting attributes
emocje
afekt
podejmowanie decyzji
atrybuty hedonistyczne
atrybuty utylitarne
ważenie atrybutów
эмоции
аффект
принятие решений
гедонические атрибуты
утилитарные атрибуты
взвешивание атрибутов
Opis:
The purpose of this paper was to investigate how different affective states (positive vs. negative) influence weighting hedonic and utilitarian product attributes. The proposed hypotheses indicated that attributes consistent in valence with decisionmakers affective state and product category should gain more weights than inconsistent features. Two experiments were carried out to test those predictions. The findings from the study suggest that the role of affective state on the perceived importance of product attribute is limited. Individuals who participated in Experiment 1 perceived hedonic attributes as more important than utilitarian ones when they experienced positive affect. On the other hand, Experiment 2 showed that participants in negative-affect group weighted consistent features more than inconsistent.
Celem artykułu było zbadanie, jak różne stany afektywne (pozytywne kontra negatywne) wpływają na ważenie hedonistycznych i utylitarnych atrybutów produktów. Zaproponowane hipotezy wskazywały, że atrybuty zgodne pod względem wartości z afektywnym stanem decydentów i kategorią produktu powinny mieć większe wagi niż cechy niezgodne. Do przetestowania przewidywań przeprowadzono dwa eksperymenty. Wyniki badania sugerują, że rola stanu afektywnego w kwestii postrzegania ważności atrybutu produktu jest ograniczona. Osoby uczestniczące w eksperymencie 1. postrzegały atrybuty hedonistyczne jako ważniejsze niż utylitarne, kiedy doświadczały pozytywnej emocji. Z drugiej strony, eksperyment 2. pokazał, że uczestnicy z grupie o afektach negatywnych ważyli cechy zgodne jako wyższe niż niezgodne.
Цель статьи – изучить, как разные эмоциональные состояния (поло- жительные и отрицательные) воздействуют на взвешивание гедонических и утилитарных атрибутов продукта. Предлагаемые гипотезы указывали, что атрибуты, совместимые по своему значению с эмоциональным состоянием принимающих решения и категорией продукта, должны обретать бóльшие весы, чем несовместимые свойства. Для проверки этих гипотез провели два эксперимента. Результаты изучения подсказывают, что роль эмоционально- го состояния в отношении полученного значения атрибута продукта имеет ограниченный характер. Лица, которые принимали участие в эксперименте № 1, воспринимали гедонические атрибуты как более существенные, неже- ли утилитарные, когда они испытывали положительное ощущение. С другой стороны, эксперимент № 2 показал, что участники в группе с негативными ощущениями взвешивали совместимые свойства выше, чем несовместимые.
Źródło:
Handel Wewnętrzny; 2018, 4 (375) tom II; 272-282
0438-5403
Pojawia się w:
Handel Wewnętrzny
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies