Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "synchronous generator" wg kryterium: Temat


Tytuł:
Influence of Field Current Waveform on Higher Harmonic Content in Cylindrical Synchronous Generator
Autorzy:
Ludwinek, K.
Staszak, J.
Bekier, T.
Kurkiewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/1367539.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
stator windings
synchronous generator
Opis:
The paper presents a comparison of the higher harmonics in the induced voltages in the stator windings of cylindrical synchronous generator rated at 8.5 kVA under no-load conditions. The comparison is made for the generator with linear and non-linear magnetic circuit without damping cage using constant and variable field current. The calculations of the electromagnetic parameters are carried out in FEMM program. The simulation results are verified experimentally.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 125-130
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reconditioning in synchronous operation with one parallel induction generator
Autorzy:
Magalhães, A. S.
Moraes, P. H. F.
Silva, A. H. F.
Gomes, P. H. G.
Alves, A. J.
Calixto, W. P.
Powiązania:
https://bibliotekanauki.pl/articles/136216.pdf
Data publikacji:
2016
Wydawca:
EEEIC International Barbara Leonowicz Szabłowska
Tematy:
repowering
induction generator
synchronous generator
harmonics
Opis:
The purpose of this paper is to compare mathematical modeling and practical bench in order to validate the electrical interactions between an induction generator and a synchronous generator. Two generators was connected to a common bus in steady state, subject to non-linear load. The results comparing modeling and bench tests show that the induction generator besides the active power increasing, has a better way for harmonic currents flowing in common bus. It was concluded that the induction generator repowering and attenuates current harmonic components present at the connection point, improving the network voltage profile.
Źródło:
Transactions on Environment and Electrical Engineering; 2016, 1, 4; 66-72
2450-5730
Pojawia się w:
Transactions on Environment and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical model of synchronous generator for diagnostics and settings tests of marine AVRS
Model matematyczny generatora synchronicznego dla potrzeb diagnostyki i testowania okrętowego automatycznego regulatora napięcia
Autorzy:
Bastian, B.
Płachtyna, O.
Powiązania:
https://bibliotekanauki.pl/articles/1368681.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
synchronous generator
modeling
diagnostics
marine AVRS
Opis:
This article presents the idea of applying of the mathematical model of synchronous generator for diagnostics and settings tests of marine automatic voltage regulator (AVR). The algorithm of the authors numeric method named ‘the average step voltages’ is introduced. The model application and its physical realization in the laboratory are described. The proper online cooperation of the implemented model and the real AVR has been achieved. The obtained measuring results are shown.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2013, 4, 100/2; 181-184
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Feasibility study of the electric power generation unit start-up using the three-phase synchronous generator with the AC exciter
Autorzy:
Racewicz, S.
Olejnik, A.
Powiązania:
https://bibliotekanauki.pl/articles/243967.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
brushless synchronous generator
starter-generator machine
CHP system
Opis:
The article presents the feasibility study of using the three-phase synchronous generator with the AC exciter as a starter for the Fiat 0.9 TwinAir CNG 80 HP internal combustion engine. The investigated power generation unit consists of the above mentioned internal combustion engine which can be powered by a biogas and the three-phase electric power generator MeccAlte 16 kW with the AC exciter. The use of an electric generator for starting a combustion engine is an innovative approach, which eliminates the need for additional components like starter reducing the mass and the failure frequency of the device. Similar approaches have been already investigated by the aircraft manufacturers for starting the jet engines of the airliners and are widely used in the hybrid engines for vehicles. The field winding of the three-phase synchronous generator described in the paper is connected to the AC exciter via a rotating rectifier bridge. This solution eliminates the necessity of using slip rings and facilitates a voltage regulation of the generator. The authors of the paper analyse the technical and practical possibilities of using such a synchronous generator with the exciter as a starting motor by measuring its output power and starting torque. The economic aspects of such a solution for unit and mass production have been also considered.
Źródło:
Journal of KONES; 2016, 23, 3; 411-417
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three-level Vienna Rectifier with a Brushless and Permanent Magnetless Generator for Wind Energy Conversion Systems
Autorzy:
Bhattacherjee, Haimanti
Mukherjee, Debranjan
Chakraborty, Chandan
Powiązania:
https://bibliotekanauki.pl/articles/2175926.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
brushless synchronous generator
magnetless synchronous generator
maximum power point
unity power factor
Vienna rectifier
wind energy conversion system
Opis:
This paper proposes a system design and control technique for a newly developed brushless and permanent magnetless synchronous generator-based variable-speed wind energy generation system, transferring power to a constant voltage dc grid via a three-level Vienna rectifier (VR). The recently established generator named Brushless Induction excited Synchronous Generator (BINSYG) is a wound field synchronous generator (WFSG), whose excitation is developed by controlling an Induction Machine fitted to the same machine structure and sharing the same magnetic core. A new controller is proposed that ensures the stable operation of BINSYG for a wide variation of shaft speeds. VR achieves sinusoidal input current and can control the power factor at its input, which is particularly suitable for wind energy applications. The top and bottom capacitor voltages of the VR are balanced using redundant switching combinations. The system with its proposed control algorithm is modelled in MATLAB/Simulink for a 5 kW rated BINSYG feeding power to a 750 V dc grid. The steady-state and dynamic state simulation results are presented and the controller performance is verified for a wide range of wind speeds. Further, real-time results using the OPAL-RT testbed are presented for the same system to verify the effectiveness of the overall control strategy.
Źródło:
Power Electronics and Drives; 2022, 7, 42; 84--102
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Higher Harmonic Contents in Salient Pole Synchronous Generator with Radial Incisions on the Solid Pole Surface
Autorzy:
Ludwinek, K.
Nadolski, R.
Staszak, J.
Powiązania:
https://bibliotekanauki.pl/articles/1367523.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
salient pole synchronous generator
solid rotor
higher harmonic
Opis:
The paper presents a comparison of higher harmonics in the induced voltages in the stator windings of three salient pole synchronous generators with different rotor construction. The comparison is done for generators with solid rotor without a skew, with solid rotor with radial incisions and with a rotor which consists of laminated electrotechnical steel with a skew. The calculations of the magnetic field distribution in the air gap are made in FEMM program. Comparison of the induced voltage waveforms in the stator windings is based on experimental investigations.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 113-118
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Real time computer tester for automatic voltage regulators used in marine generators
Autorzy:
Płachtyna, O.
Bastian, B.
Kutsyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/378183.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
synchronous generator
mathematical model
numerical method
real time
Opis:
This article briefly introduces the characteristics of ships' electrical power networks, and an existing system is described as an example. A mathematical model of a selected power system, including generators with a drive and its loads, is presented. The algorithm implementing the author's numerical method, named 'the average step voltages method', is described. The chosen numerical method is notable for its stability and high accuracy, even in combination with a large integration step size. Software and hardware applications of the RT AVR tester are also shown. To check the adequacy of the simulations using the implemented model, experimental measurements were carried out. The measurements, including dynamic states, obtained by the computer tester with the AVR system, as well as the physical model with the AVR system, are summarized. Possibilities for usage in the marine industry in the future are also outlined.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2016, 85; 465-476
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of electrical non-isolated load sharing systems operation with use of the auctioneering diodes
Autorzy:
Kozak, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/376808.pdf
Data publikacji:
2019
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
DC link
microgrids
FOC
asynchronous generator
synchronous generator
load sharing
Opis:
The paper presents the background and results of numerical simulation and experimental research of a system using auctioneering diodes used to distribute the power of direct current between two power converters operating in parallel. Non-isolated power distribution systems using blocking diodes are used in the ship's electrical power systems, however, they create problems related to control and the possibility of ground faults. Another issue occurring during the operation of this type of systems is the increased heat dissipation. Selected problems related to the operation of the above systems have been identified by means of simulation studies and experiments carried out in a 11 kVA laboratory system and the theoretical basis along with results are provided in the article.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2019, 98; 77-88
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of star-delta mixed stator winding in permanent magnet synchronous machines with permanent magnets on the rotor surface
Zastosowanie uzwojenia mieszanego stojana typu gwiazda-trójkąt w maszynach synchronicznych o magnesach trwałych
Autorzy:
Gwoździewicz, M.
Gawron, S.
Powiązania:
https://bibliotekanauki.pl/articles/1807525.pdf
Data publikacji:
2011
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
higher harmonics
synchronous motor
synchronous generator
permanent magnet
winding factor
windings
Opis:
W artykule przedstawiono rezultaty zastosowania uzwojenia mieszanego stojana typu gwiazdatrójkąt w maszynach synchronicznych o magnesach trwałych. Na bazie produkowanej przez KOMEL maszyny synchronicznej o magnesach trwałych typy PMGg180L-8 został zbudowany model polowoobwodowy w programie Maxwell wersja 14. Zbadano wpływ zastosowania uzwojenia mieszanego stojana typu gwiazda trójkąt na występowanie wyższych harmonicznych oraz właściwości eksploatacyjne maszyn synchronicznych o magnesach trwałych.
Źródło:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały; 2011, 65, 31; 55-63
1733-0718
Pojawia się w:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Particle swarm optimization for tuning PSS-PID controller of synchronous generator
Autorzy:
Derrar, A.
Naceri, A.
Powiązania:
https://bibliotekanauki.pl/articles/384775.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
synchronous generator
PSS
particle swarm optimization (PSO)
PID controller
Opis:
In this paper the design an optimal PSS-PID controller for single machine connected to an infinite bus (SMIB). We presented a novel application of particle swarm optimization (PSO) for the optimal tuning of the new PSS-PID controller. The proposed approach has superior features, including easy implementation, stable convergence characteristic and good computational efficiency. The synchronous generator is modeled and the PSO algorithm is implemented in Simulink of Matlab. The obtained results have proved that (PSO) are a powerful tools for optimizing the PSS parameters, and more robustness of the system IEEE SMIB.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2017, 11, 1; 48-52
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Frequency control of voltage sourced converter-based multi-terminal direct current interconnected system based on virtual synchronous generator
Autorzy:
Li, Congshan
Zhang, Xiaowei
He, Ping
Zhen, Zikai
Zhao, Kefeng
Powiązania:
https://bibliotekanauki.pl/articles/27309962.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
adaptive droop control
power margin
VSG
virtual synchronous generator
Opis:
In response to the inability of the flexible DC transmission system connected to the AC grid under conventional control strategies to provide inertia to the system as well as to participate in frequency regulation, a virtual synchronous generator (VSG) control strategy is proposed for a voltage source converter (VSC)-based multi-terminal high-voltage direct current (VSC-MTDC) interconnection system. First, the virtual controller module is designed by coupling AC frequency and active power through virtual inertia control, so that the VSC-MTDC system can provide inertia response for AC grid frequency. Second, by introducing the power margin of the converter station into the droop coefficient, the unbalanced power on the DC side is reasonably allocated to reduce the overshoot of the DC voltage in the regulation process. Finally, the power regulation capability of the normal AC system is used to provide power support to the fault end system, reducing frequency deviations and enabling inter-regional resource complementation. The simulation model of the three-terminal flexible DC grid is built in PSCAD/EMTDC, and the effectiveness of the proposed control strategy is verified by comparing the conventional control strategy and the additional frequency control strategy.
Źródło:
Archives of Electrical Engineering; 2023, 72, 4; 971--986
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polyarmonic model of synchronous generator for analysis of autonomous power generation systems
Autorzy:
Kutt, F.
Michna, M.
Ronkowski, M.
Chrzan, P.J.
Powiązania:
https://bibliotekanauki.pl/articles/1372704.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
generator synchroniczny
maszyna elektryczna
model poliharmoniczny
synchronous generator
electric machine
polyharmonic model
Opis:
This paper presents the polyharmonic modelling of synchronous generator (SG) in machine variables. The simple geometry and windings physical layout has been used for inductance calculations of a salient-pole SG. The main advantage of this model is the ease of describing an autonomous power generation system (APGS) in terms of its topology and thus providing effective analysis at the static and dynamic states, both for normal and fault operations. Particularly, the model can be used to obtain SG voltage and currents for their more extensive harmonic analysis. Comparison of the simulation and measurement results has shown their good agreement, i.e., validating the elaborated polyharmonic model of SG.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2011, 4, 92; 109-114
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synchrogenverter - parallel connection of synchronous generator and power converter with energy storage
Autorzy:
Szulawski, P.
Koczara, W.
Powiązania:
https://bibliotekanauki.pl/articles/1193215.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
synchronous generator
power electronic converter
synchrogenverter
energy storage current control
Opis:
The paper describes novel power generation topology wherein synchronous generator have a parallel connected power electronic converter. In this arrangement synchronous generator is only source of active power and power electronic converter is source of reactive power. Such power distribution allows to increase the synchronous generator generated active power by 25%, and operate with unity power factor. The power converter with energy storage system embedded can deliver additional active power in transient state to improve generator stability.
Źródło:
Power Electronics and Drives; 2016, 1, 36/1; 69-78
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Initial Excitation Issues of Synchronous Generator with VSI Inverter in Varying Rotational Speed Operation
Autorzy:
Kozak, M.
Powiązania:
https://bibliotekanauki.pl/articles/2064987.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
synchronous generator
initial excitation
FOC control
voltage source inverter
synchronization
Opis:
Synchronous self-excited generators still are and probably will be the most popular 3-phase alternators installed in inland power stations so onboard of seagoing ships. Because of fuel savings and environmental restrictions Diesel, dual-fuel and gas propulsion engines for alternators of wide-range varying revolutions drives are increasingly used. There must be efficient way of creating 3-phase voltages of desired constant parameters ensured when generator produces variable amplitudes and frequencies of voltages because of changing rotational speed. As the control method modified field oriented control widely used with squirrel cage induction machines was chosen. This control method involves decoupling of currents and control voltages to flux and torque components and keeping them in optimal (orthogonal) condition. In order to obtain proper excitation and operation of such generator several factors have to be taken into account. Nonlinear dependence of voltage generated from rotational speed of self-excited synchronous generator is one of the factors that affects initial excitation process thus specific control method while generator startup. Theoretical background of synchronous generator excitation and voltage source inverter adopted FOC control method along with experimental results obtained in laboratory test bench of 5,5 kW generator and conclusions were presented.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2018, 1, 1; 377--383
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation and experimental examinations of voltage inverter and synchronous generator synchronization system with the use of VisualDSP++ 5.0 environment
Autorzy:
Kozak, M.
Powiązania:
https://bibliotekanauki.pl/articles/97413.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
synchronous generator
machine inverter
Radix–2 FFT
synchronization
DSP
real–time
Opis:
This study describes the operation of the programming algorithm used to synchronize the machine VSI inverter with the rotating synchronous generator. Presented algorithm which bases on the Radix–2 Fourier transform allows to synchronize the inverter with the machine with variable in wide range rotating speed. This study presents the results obtained with use of the simulation software and the auxiliary software created with the use of VisualDSP++ 5.0 development environment and exemplary results of an algorithm operation in the laboratory test stand.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 210-219
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies