Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "przenośnik taśmowy" wg kryterium: Temat


Tytuł:
Efficient method for storage of long conveyor belts passages inside the bulk containers
Metoda gromadzenia długich odcinków taśm przenośnikowych nawiniętych w kasetach
Autorzy:
Łuszczkiewicz-Piątek, M.
Pypno, Cz.
Łuszczkiewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/374242.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
opakowanie zbiorcze
przenośnik taśmowy
conveyor belt
bulk containers
Opis:
The paper introduces the family of the algorithms designed to improve the process of winding up the long conveyor belt passages on reels located inside the bulk containers, used for i.e. rail transport. The proposed method provides the convenient storage technique of the long belt passages , enabling their transport on the standardized rail wagons. Presented solution also addresses the problems related with binding the smaller belt passages, such as shorter life span in comparison to the single-part belt. Moreover, the presented work contains not only the details of the two algorithms representative for the proposed method, but also the outlook of the system of the automatic control required for the successful application of the proposed technique.
Artykuł przedstawia rodzinę algorytmów zastosowanych do długich odcinków taśm przenośnikowych nawijanych na bębny w kasetach przystosowanych do transportu szynowego. Zaproponowana metoda przedstawia sposób gromadzenia długich odcinków taśm przenośnikowych na typowych wagonach kolejowych. Prezentowane rozwiązanie pozwala wyeliminować problemy związane z łączeniem krótkich odcinków taśm w całość. Ponadto w pracy przedstawiono oprócz dwóch dokładnych algorytmów proponowanej metody także pogląd na system automatycznego sterowania przedmiotowego rozwiązania.
Źródło:
Transport Problems; 2011, 6, 3; 77-85
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Unification of Equipment for Transporting People, Coal and Materials Produced by Jastrzębskie Zakłady Remontowe Sp. z o. o. and Used in the Mines of the JSW Capital Group
Autorzy:
Dyczko, Artur
Rychter, Rafał
Bosowski, Adam
Konsek, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/2064356.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
unification
transport
chain conveyor
belt conveyor
unifikacja
przenośnik łańcuchowy
przenośnik taśmowy
Opis:
The publication presents the assumptions of the unification process of machines and equipment produced by Jastrzębskie Zakłady Remontowe Sp. z o. o. and operating at the coal mines of the JSW Capital Group. It outlines a solution adopted by JZR Sp. z o. o. addressing this issue. The authors identify the potential benefits of the process to the entire Jastrzębska Spółka Węglowa Capital Group, but they also mention the risks that may arise during its implementation. The publication also presents the first results of the unification, observed on the basis of the unified equipment and machinery of the coal clearance system for transporting people, coal and materials, which has already been put into operation in underground mining excavations. It also includes a chapter devoted to the influence of the unification on the development of “technical thought,” i.e. on the innovativeness of the equipment for transporting people, coal and materials newly produced by Jastrzębskie Zakłady Remontowe Sp. z o. o. which are to be implemented in the near future. New, innovative solutions are presented, which were introduced both in the unified transport devices such as chain and belt conveyors and in devices cooperating with them, i.e. lump breakers, pushing devices and other accessory equipment for the conveyors.
Źródło:
New Trends in Production Engineering; 2020, 3, 1; 303--314
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustic environmental hazards of work on main road haulage levels in the coal mine
Zagrożenia akustyczne w środowisku pracy głównych ciągów transportowych w kopalni wegla kamiennego
Autorzy:
Profaka, M.
Głodała, Z.
Powiązania:
https://bibliotekanauki.pl/articles/112546.pdf
Data publikacji:
2012
Wydawca:
STE GROUP
Tematy:
hałas
identyfikacja
przenośnik taśmowy
transport
noise
identification
belt conveyor
Opis:
Artykuł prezentuje główne charakterystyki akustyczne dróg transportowych na poziomach eksploatacyjnych kopalni węgla. Zaprezentowano wyniki wstępnych testów, ich ocena i szczegółowe studium w tym zakresie. Badanie przeprowadzono w dwóch obszarach, gdzie wyznaczono bezpieczne poziomy hałasu.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2012, 1 (1); 179-187
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of technical state of the belt conveyor rollers with use vibroacoustics methods - preliminary studies
Ocena stanu technicznego krążników przenośników taśmowych metodami wibroakustycznymi - badania wstępne
Autorzy:
Peruń, G.
Opasiak, T.
Powiązania:
https://bibliotekanauki.pl/articles/328211.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
belt conveyor
vibroacoustics
vibration measurements
przenośnik taśmowy
wibroakustyka
pomiar drgań
Opis:
Most numerous elements in construction of belt conveyors are rollers. From theirs technical state depend the losses of energy among other things on overcome turn resistances of rollers rotation. With point of view of exploitation significant is correct technical state of rollers, which guarantee minimal costs of conveyor work. In the article are present results of preliminary studies, which have on aim non-invasive qualification of technical state of belt conveyor rollers after specified time of exploitation. The measurements of jacket’s vibrations of roller installed on laboratory stand were conducted. Next, registered vibration signals were processed. Authors make an assumption, that the comparison of analyses’ results for new and wear rollers, allow in next stages of studies determining of limit levels of vibroacoustics phenomena, which exceeding qualify roller to replacement.
Najbardziej licznym elementami w konstrukcji przenośników taśmowych są krążniki. Od ich stanu technicznego zależy wielkość strat energii potrzebnej m.in. na pokonywanie oporów obracania krążników. Z punktu widzenia eksploatacji ważny jest więc poprawny stan techniczny krążników, który gwarantuje minimalne koszty pracy przenośnika. W artykule zaprezentowano wyniki wstępnych badań, które mają na celu bezinwazyjne sprawdzenie stanu technicznego krążników przenośnika taśmowego po określonym czasie eksploatacji. W tym celu przeprowadzono pomiary drgań płaszcza krążników montowanych na stanowisku laboratoryjnym. Zarejestrowane sygnały drganiowe poddano następnie przetwarzaniu. Autorzy przyjęli założenie, że porównanie wyników analiz dla krążników nowego i używanych przez różny czas, pozwoli w kolejnych etapach badań określić graniczne poziomy zjawisk wibroakustycznych, których przekroczenie będzie kwalifikowało krążnik do wymiany.
Źródło:
Diagnostyka; 2016, 17, 1; 75-80
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analyse of vibrations after changing shaft coupling in drive belt conveyer
Analiza drgań po zmianie sprzęgła w napędzie
Autorzy:
Grega, R.
Homisin, J.
Kassay, P.
Krajnak, J.
Powiązania:
https://bibliotekanauki.pl/articles/197709.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
przenośnik taśmowy
napęd zasilający
sprzęgło
belt conveyor
power drive
clutch
Opis:
Within the complex dynamic systems such as power drive every part becomes a potential vibration driver with negative impact on the environment, maintenance and useful life of the mechanical systems. In addition, the purpose of this paper is to show the application of a new type of the flexible shaft coupling – pneumatic flexible shaft coupling – with the main aim to examine the impact of the given coupling on the magnitude of the torsional vibration and, practically, its consequent vibration in the mechanical drive system.
W skomplikowanych systemach dynamicznych takich jak napęd zasilający każda część jest potencjalnym nośnikiem wibracji mającym negatywny wpływ na środowisko, utrzymanie i żywotność danego systemu mechanicznego. Celem niniejszej pracy jest pokazanie zastosowania nowego typu elastycznego sprzęgła na poziomie drgań skrętnych oraz pokazanie w praktyce wibracji bedących konsekwencją drgań w mechanicznym systemie napędowym.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2011, 72; 23-31
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rollers for belt conveyors in terms of rotation resistance and energy efficiency
Autorzy:
Opasiak, Tadeusz
Margielewicz, Jerzy
Gąska, Damian
Haniszewski, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2203884.pdf
Data publikacji:
2022
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
belt conveyor
roller
motion resistance
przenośnik taśmowy
wałek
opór ruchu
Opis:
The paper shows the results of researching the rollers used in belt conveyors working in a hard coal mine. Rollers should be characterized by low rotation resistance, which results in low power consumption of the propulsion unit. The tests conducted aimed to assess the technical condition of the new C-type rollers after several years of operation in a hard coal mine. The research was carried out from the new approach to the standard issues of roll testing and verification in a hard coal mine. Laboratory tests were combined with testing the entire belt conveyor in terms of power demand. The research was carried out for 3 years and it was monitored how the dynamic resistance of the working rollers changed and how this translates into the power demand consumed by the belt conveyor in a hard coal mine. The aim of the research was a new approach to the research of rollers used in conveyors operating in a mine.
Źródło:
Transport Problems; 2022, 17, 2; 57--68
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Minimizing noise emission of the main road haulage evels in the coal mine
Minimalizacja natężenia hałasu na głównych ciągach transportowych w kopalni węgla kamiennego
Autorzy:
Profaka, M.
Głodała, Z.
Powiązania:
https://bibliotekanauki.pl/articles/113496.pdf
Data publikacji:
2012
Wydawca:
STE GROUP
Tematy:
hałas
minimalizacja hałasu
przenośnik taśmowy
transport
noise
noise minimization
belt conveyor
Opis:
Artykuł prezentuje sposoby minimalizacji emisji hałasu na głównych ciągach transportowych kopalni w oparciu o wcześniej przeprowadzone badania. Przykładowe możliwości minimalizacji emisji hałasu obejmujące: redukcję hałasu u źródła, adaptacja akustyczna sekcji urabiającej kombajnu chodnikowego, obudowanie przenośników taśmowych.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2012, 1 (1); 188-196
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of loading carrying idlers used in belt conveyor – practical applications
Badania obciążeń krążników nośnych przenośników taśmowych – efekty utylitarne
Autorzy:
Król, R.
Kisielewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/328461.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
idler
belt conveyor
measurement of loads
krążnik
przenośnik taśmowy
pomiar obciążeń
Opis:
The article presents a method and results of the implemented measurements of loads of a single carrying idler set on a belt conveyor under working conditions. Currently, identification of the quantity and flow stream of material on the conveyor's belt in mining conditions takes place by means of roller weights. These are devices ensuring identification of temporary efficiency, however, they do not allow precise definition of the scope of real forces to which a single idler is subjected to in the set. Such information can be obtained using a strain gauge measurement method prepared in the Mining Institute of the Wrocław University of Technology. At this point it should be remembered that nothing else but load is a key input parameter in any analyses and design calculations of idlers. The obtained measurement results of loads of carrying idlers and the conducted analyses of performed experimental works find practical application in the process of optimizing construction solutions of idlers - both with regard to the strength and operating requirements. They may be used to estimate a level of durability of idlers and are a valuable source of information when determining the actual level of their power consumption. The selected examples of such applications have been included in this paper.
W artykule przedstawiono metodę i wyniki realizowanych pomiarów obciążeń pojedynczego zestawu krążników nośnych na przenośniku taśmowym w warunkach eksploatacyjnych. Aktualnie identyfikacja ilości i strumienia przepływu materiału na taśmie przenośnika w warunkach kopalnianych odbywa się za pomocą wag rolkowych. Są to urządzenia zapewniające określenie wydajności chwilowej, jednak nie pozwalają precyzyjnie określić zakresu rzeczywistych sił jakim poddawany jest pojedynczy krążnik w zestawie. Takie informacje uzyskać można stosując opracowaną w Instytucie Górnictwa Politechniki Wrocławskiej tensometryczną metodę pomiarową. Należy przy tym pamiętać, że właśnie obciążenie jest kluczowym parametrem wejściowym we wszelkich analizach i obliczeniach projektowych krążników. Pozyskane wyniki pomiarów obciążeń krążników nośnych, oraz przeprowadzone analizy realizowanych prac eksperymentalnych znajdują praktyczne zastosowanie w procesie optymalizacji rozwiązań konstrukcyjnych krążników, zarówno w zakresie wymagań wytrzymałościowych i eksploatacyjnych. Mogą być wykorzystane do szacowania poziomu trwałości krążników oraz stanowią cenne źródło informacji przy określaniu rzeczywistego poziomu ich energochłonności. Wybrane przykłady takich zastosowań zawarto w niniejszej pracy.
Źródło:
Diagnostyka; 2014, 15, 1; 67-73
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Analysis of Effectiveness of Conveyor Belt Tensioning Systems
Autorzy:
Kulinowski, Piotr
Kasza, Piotr
Zarzycki, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/2064260.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
conveyor belt
tensioning system
effectiveness
przenośnik taśmowy
skuteczność
wciągarka
układ napinania taśmy
Opis:
The publication presents the evaluation of the effectiveness of belt tensioning systems based on the results of model laboratory tests. The types of tensioning devices most commonly used in industry were selected for testing: winch, gravity, pneumatic and follower. The evaluation of the efficiency of belt tensioning devices is complex, as the tensioning system is not autonomous and is only part of the belt conveyor equipment. Therefore, the publication presents the impact of belt tension force on the durability of basic conveyor components such as the belt and its joints, and drums. The characteristics of the tested belt tensioning devices are presented and the construction and research capabilities of the laboratory model of the belt conveyor are described. Measuring systems mounted on the conveyor are described in detail, enabling recording of variable conveyor operating conditions, measuring belt speed, driving force and belt stress. The results of the research are the experimental static characteristics of the most commonly used tensioning devices, which show the relationship between the drive moment and the belt tensioning force. Obtained characteristics will allow the development of guidelines for the design and selection of the most effective belt tensioning devices.
Źródło:
New Trends in Production Engineering; 2020, 3, 1; 283--293
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comprehensive check measurement of key parameters on model belt conveyor
Kompleksowa ocena i kontrola kluczowych parametrów modelowego przenośnika taśmowego
Autorzy:
Moni, V.
Klouda, P.
Škraban, V.
Powiązania:
https://bibliotekanauki.pl/articles/409958.pdf
Data publikacji:
2013
Wydawca:
STE GROUP
Tematy:
belt conveyor
belt diagnostics
reliability
tensioning
przenośnik taśmowy
diagnostyka taśmy
niezawodność
napięcie
Opis:
Complex measurements of characteristic parameters realised on a long distance model belt conveyor are described. The main objective was to complete and combine the regular measurements of electric power on drives of belt conveyors operated in Czech opencast mines with measurements of other physical quantities and to gain by this way an image of their mutual relations and relations of quantities derived from them. The paper includes a short description and results of the measurements on an experimental model conveyor with a closed material transport way.
W artykule opisane zostały kompleksowe pomiary charakterystycznych parametrów które były realizowane na modelu przenośnika taśmowego. Głównym celem było wykonanie i połączenie pomiarów energii elektrycznej w napędach przenośników taśmowych pracujących w czeskich kopalniach odkrywkowych, z pomiarami innych wielkości fizycznych aby uzyskać w ten sposób obraz ich wzajemnych związków i otrzymanych wielkości. Artykuł zawiera krótki opis i wyniki pomiarów na eksperymentalnym modelu przenośnika w zamkniętym obiegu transportu materiału.
Źródło:
Management Systems in Production Engineering; 2013, 3 (11); 24-27
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Durability testing of idlers for belt conveyors
Autorzy:
Pytlik, A.
Powiązania:
https://bibliotekanauki.pl/articles/92040.pdf
Data publikacji:
2013
Wydawca:
Główny Instytut Górnictwa
Tematy:
belt conveyor
idler
testing stand
durability
przenośnik taśmowy
krążnik
stanowisko badawcze
trwałość
Opis:
The main purpose of idlers is to provide the correct shaping, support and protection of a belt conveyor, reduce motion resistance as well as support for transported materials. The durability of idlers depends on numerous construction, engineering and operational factors. In practice, the idler bearings are often damaged due to wear and tear, jamming or seizure and the calculated durability does not comply with the actual lifetime of a bearing (Antoniak 2007). According to laboratory and operational practices, the quality of currently manufactured standard idlers is low and their average durability is approximately one year (Gładysiewicz, Orzeł, Noga 2012). Idlers do not meet the requirements specified in the PN-M-46606:2010 standard, even at the stage of their production, which is confirmed by tests carried out in the Department of Mechanical Devices Testing – the Central Mining Institute (GIG). Taking the above into consideration, testing stands which allow the testing of static and dynamic resistance of idlers’ movements as well as stands for examing the idlers’ water-tightness and dust-tightness in accordance with the PN-M-46606:2010 standard have been designed and constructed in the Department of Mechanical Devices Testing – the Central Mining Institute. The abovementioned testing stands were extended with additional functions, with regard to the above specified standard, facilitating the measurement of the temperature of bearing assemblies and to test the influence of rotational speed and idler loading in regards to durability. The tests were carried out on idlers with diameters of f133 and f159 mm, with a bearing assembly equipped with a single-raw ballbearing. A newly developed type of hybrid seal (labyrinth-lip), registered in the Patent Office of the Republic of Poland under the number W.121582 on 17 December 2012 (Pytlik, Rabsztyn 2012), was used in the idler with the diameter of f133. A typical labyrinth seal was used in the idler with the diameter of f159. On the basis of the durability tests carried out on both of these idlers it can be concluded that the applied research methodology describes the test conditions of idlers, in a manner as close as possible to their actual operational conditions, which were subject to a variety of factors for a total time of 116 hours, they included: dust, water, loads and variable rotational speed. This methodology allowed us to determine, even at the stage of laboratory tests, the suitability of a particular idler to certain operational conditions.
Źródło:
Journal of Sustainable Mining; 2013, 12, 3; 1-7
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of an Operating Conditions on the Friction Coefficient in Transportation Machines Drives
Autorzy:
Kasza, Piotr
Kulinowski, Piotr
Zarzycki, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/2064364.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
belt conveyor
friction coefficient
transportation machines
underground railway
przenośnik taśmowy
współczynnik tarcia
maszyny transportowe
Opis:
The publication presents the construction of the station for testing the friction coefficient under high pressure and low slip velocity values. These conditions of cooperation of friction pairs occur in the drives of transport machines such as belt conveyors and suspended monorails. The value of the friction coefficient, depending on the operating conditions such as moisture and rock or coal dust pollution, has a significant impact on the correct and efficient operation of such drives. The features of the station allow mapping the operating conditions on a laboratory scale. As part of the research, appropriate friction samples made of rubber or polyurethane were prepared. Referring to the conditions of conveyor operation and conditions of contact of the conveyor belt with the drive drum, the values of unit pressures and values of slip speed occurring in the drum drive of the belt conveyor were determined. A series of laboratory tests were carried out for the friction pair rubber drum lining – conveyor belt cover. The tests were carried out for four different states of friction vapor surfaces, namely for dry and wet samples, as well as for samples in clean or contaminated with stone dust. As a result of the tests, the values of friction coefficients for various surface states were determined, which will be valuable information for designers of friction drive systems of transport devices.
Źródło:
New Trends in Production Engineering; 2020, 3, 1; 294--302
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opportunities to improve the efficiency of the “Gwarek 1200” belt conveyor
Autorzy:
Peruń, Grzegorz
Łazarz, Bogusław
Opasiak, Tadeusz
Powiązania:
https://bibliotekanauki.pl/articles/1841161.pdf
Data publikacji:
2020
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
belt conveyor
roller
drive power
vibroacoustic diagnostic
przenośnik taśmowy
wałek
moc napędu
diagnostyka wibroakustyczna
Opis:
The article presents the results of research of the Gwarek 1200 belt conveyor. The work aimed to determine the possible benefits of changing the type of rollers used. It was expected that the change of the rollers from N-type to C-type will reduce the costs of energy consumed by the conveyor drive system. This part of the research was carried out in a hard coalmine at the level of 665 m. The test was given the entire power unit in terms of the starting power demand and rated power in real time. Measurement works were carried out before and after the modernization of the conveyor for 5 years. Moreover, it was decided to extend the research to include vibroacoustic tests, aimed at determining the technical condition by measuring vibrations. It is expected that based on the analysis of vibration signals in the long term will allow to develop a method for diagnosing belt conveyor rollers and to quickly detect their malfunction under normal operating conditions.
Źródło:
Transport Problems; 2020, 15, 4, cz. 2; 215-226
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cassette for collecting long sections of conveyor belts and its possibilities of transport
Kaseta do gromadzenia długich odcinków taśm przenośnikowych oraz możliwości jej transportu
Autorzy:
Łuszczkiewicz, J.
Pypno, C.
Powiązania:
https://bibliotekanauki.pl/articles/374898.pdf
Data publikacji:
2010
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
przenośnik taśmowy
kaseta specjalna
bardzo długi odcinek
belt conveyor
special cassette
very long section
Opis:
In the nineties of 20th century there were plenty of applications of long distance belt conveyors. This tendency has been noticed in many designing centres all over the world [2]. The article presents the project of long distance conveyor in which the belt is vulcanized of few but very long (of kilometre length) sections instead of many (several dozen) short sections. A small amount of sections results in a small amount of connections and has influence on the price and resistance of motion of the belt.
Ostatnie lata XX w. zaowocowały aplikacjami przenośników taśmowych dalekiego zasięgu. Jest to zauważalna tendencja występująca w wielu ośrodkach projektowych na świecie [2]. W artykule przedstawiono projekt przenośnika długiego lub dalekiego zasięgu, w którym taśma jest zwulkanizowana z małej ilości (kilku), ale za to bardzo długich (kilometrowych lub dłuższych) odcinków, w zamian za bardzo wiele (kilkunastu, kilkudziesięciu) odcinków krótkich (kilkusetmetrowych). Mała ilość odcinków taśm to również mała ilość łączeń, co ma wpływ na cenę oraz opory ruchu taśmy.
Źródło:
Transport Problems; 2010, 5, 3; 21-26
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The utilisation of non-contact temperature measurements in technical diagnostics of belt conveyors
Zastosowanie bezkontaktowego pomiaru temperatury w diagnostyce przenośników taśmowych
Autorzy:
Moni, V.
Helebrant, F.
Powiązania:
https://bibliotekanauki.pl/articles/360319.pdf
Data publikacji:
2011
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
przenośnik taśmowy
diagnostyka techniczna
termografia
pomiary termowizyjne
belt conveyor
technical diagnostics
thermography
thermovisual measurements
Opis:
The article deals with examples of thermography use (thermovisual measurements) to find out the technical state of belt conveyors and their equipment in open-pit mines. The measurements themselves are part of the grant project MPO FR-T11/537 "The Complex Diagnostic System for Belt Transportation", basic output of which is a prototype of a diagnostic system on a model belt conveyor and prepared, certified and diagnostic services. All measurements are and will be verified as in situ measurements.
W artykule przedstawiono przykład zastosowania termografii (pomiarów termowizyjnych) do oceny stanu technicznego przenośników taśmowych w kopalni węgla brunatnego. Pomiary zostały wykonane w ramach grantu zleconego przez Ministerstwo Przemysłu Czeskiej Republiki FR-TI1/537 pt. "Kompleksowy system diagnostyczny do przenośników taśmowych", którego głównym celem jest stworzenie prototypowego systemu diagnostycznego na modelowym przenośniku taśmowym oraz przygotowanie certyfikatu dla usług diagnostycznych. Wszystkie pomiary są i będą weryfikowane w warunkach rzeczywistych.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2011, 27 (99) z. 1; 112-117
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies