Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "oxy-spalanie" wg kryterium: Temat


Tytuł:
Kinetic analysis of co formation under oxy-combustion conditions
Kinetyczna analiza powstawania co w warunkach oksy-spalania
Autorzy:
Jerzak, W.
Kuźnia, M.
Powiązania:
https://bibliotekanauki.pl/articles/388931.pdf
Data publikacji:
2014
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
oxy-combustion
flame CO concentration
combustion kinetics
oxy-spalanie
stężenie CO w płomieniu
kinetyka reakcji
Opis:
The paper reports the results of numerical computations concerning the formation of CO in the kinetic flame during natural gas oxy-combustion. The effect of temperature, reagent residence time and the composition of an atmosphere containing CO2 with 21 and 29 vol % O2 on the variation of CO concentration in the flame was examined. The oxy-combustion process was conducted with a 25 % excess oxygen. The analysis of reactions in flames at temperatures of 1500 K and 1800 K was performed within the Chemked II program using the combustion mechanism proposed by Mendiara & Glarborg, which includes 779 reactions. The computation results have confirmed that the rate of the key reactions responsible for the production of CO in the flame depends on the flame temperature and the oxy-combustion temperature. The peak CO concentrations are higher for the oxidizing mixture containing 29 vol % O2. After attaining a maximum, the CO flame concentration drops faster for an atmosphere richer in oxygen. The longer the time of reagent residence in the flame region, the lower the CO concentration. In different atmospheres and at different combustion temperatures, an identical CO level can be achieved in wet combustion gas. Irrespective of the temperature and atmosphere of oxy-combustion, most CO is produced as a result of the reaction OH + COHCO2. The reduction of oxygen in the oxidizing atmosphere at flame temperatures of 1500 and 1800 K lowers the CO production in the dominant reactions responsible for CO formation. The contribution of individual reactions in the CO production for the identical atmospheres is different with varying temperature. In the case of the reaction HCO + O2HO2 +CO, the temperature increase reduces the CO production. A reverse dependence of CO production on temperature characterizes the reaction H2 + CO + MCH2O + M. In addition, change in temperature changes the order in which the dominant reactions occur. Within the residence time equal to 100 ms, two periods of intensified CO production and consumption can be identified. The peak concentrations of H, OH and O radicals in the flame attain a maximum within the same time; as time goes by, the highest concentration is achieved by OH radicals. The presence of considerable levels of CO2 in the combustion substrates has an inhibiting effect on the natural gas oxidation process.
W pracy zaprezentowano wyniki obliczeń numerycznych dotyczących tworzenia CO w kinetycznym płomieniu podczas oksy-spalania gazu ziemnego. Badano wpływ temperatury, czasu przebywania reagentów oraz składu atmosfery zawierającej CO2 i 21 oraz 29 % obj. O2 na zmianę stężenia CO w płomieniu. Proces oksy-spalania prowadzony był z 25 % nadmiarem tlenu. Analizę reakcji w płomieniach o temperaturach 1500 i 1800 K przeprowadzono w programie Chemked II, z zastosowaniem mechanizmu spalania zaproponowanego przez Mendiara, Glarborg zawierającego 779 reakcji. Wyniki obliczeń potwierdziły, że szybkość najistotniejszych reakcji odpowiedzialnych za tworzenie CO w płomieniu zależy od temperatury płomienia oraz atmosfery oksy-spalania. Szczytowe stężenia CO są większe dla mieszanki utleniającej zawierającej 29 % obj. O2. Po osiągnieciu maksimum, stężenie CO w płomieniu spada szybciej dla atmosfery bogatszej w tlen. Im dłuższy czas przebywania reagentów w obszarze płomienia, tym niższe stężenie CO. W różnych atmosferach oraz temperaturach spalania można uzyskać identyczny poziom CO w spalaniach mokrych. Bez względu na temperaturę oraz atmosferę oksy-spalania każdorazowo najwięcej CO utworzone zostaje w wyniku reakcji OH + CO H + CO2. Redukcja tlenu w atmosferze utleniającej przy temperaturach płomienia wynoszących 1500 i 1800K obniża produkcję CO w dominujących reakcjach odpowiedzialnych za tworzenie CO. Wkład poszczególnych reakcji w produkcję CO dla tych samych atmosfer ze zmianą temperatury płomienia jest zróżnicowany. W przypadku reakcji HCO + O2HO2 CO wzrost temperatury zmniejsza produkcję CO. Odwrotna zależność produkcji CO od temperatury charakteryzuje reakcję H2 + CO + MCH2O + M. Dodatkowo zmiana temperatury zmienia kolejność dominujących reakcji. W zakresie czasu rezydencji równego 100 ms wyróżnić można okresy wzmożonego tworzenia oraz zużywania CO. Szczytowe stężenia rodników H, OH i O w płomieniu osiągają maksimum w tym samym czasie, a w miarę jego upływu najwyższe stężenie posiadają rodniki OH. Obecność znacznych ilości CO2 w substratach spalania ma działanie hamujące proces utleniania gazu ziemnego.
Źródło:
Ecological Chemistry and Engineering. A; 2014, 21, 4; 415-424
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermodynamic evaluation of supercritical oxy-type power plant with high-temperature three-end membrane for air separation
Autorzy:
Kotowicz, J.
Balicki, A.
Michalski, S.
Powiązania:
https://bibliotekanauki.pl/articles/240116.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
oxy-combustion
membrane technology
air separation unit
thermodynamic evaluation
oxy-spalanie
technologie membranowe
separator powietrza
ocena termodynamiczna
Opis:
Among the technologies which allow to reduce greenhouse gas emissions, mainly of carbon dioxide, special attention deserves the idea of 'zero-emission' technology based on boilers working in oxy-combustion technology. In the paper a thermodynamic analysis of supercritical power plant fed by lignite was made. Power plant consists of: 600 MW steam power unit with live steam parameters of 650°C/30 MPa and reheated steam parameters of 670°C/6 MPa; circulating fluidized bed boiler working in oxy-combustion technology; air separation unit and installation of the carbon dioxide compression. Air separation unit is based on high temperature membrane working in three-end technology. Models of steam cycle, circulation fluidized bed boiler, air separation unit and carbon capture installation were made using commercial software. After integration of these models the net electricity generation efficiency as a function of the degree of oxygen recovery in high temperature membrane was analyzed.
Źródło:
Archives of Thermodynamics; 2014, 35, 3; 105-116
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Transition Time From Air to Oxy-Combustion
Autorzy:
Lasek, J.
Lajnert, R.
Głód, K.
Zuwała, J.
Powiązania:
https://bibliotekanauki.pl/articles/185355.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
oxy-fuel
combustion
dynamic transition
spalanie
Opis:
In this paper some issues of the transition process from air- to oxy-combustion were investigated. Advantages of flexible combustion were described. Flexible combustion tests carried out at four European plants and five plants outside Europe of different scales of process and test parameters were presented. An analysis of the transition time from air to oxy-combustion of different laboratory and pilot scale processes was carried out. The “first-order + dead time” approach was used as a model to describe transition process. Transitional periods between combustion modes and characteristic parameters of the process were determined. The transition time depends not only on the facility’s capacity but also it is impacted by specific operational parameters.
Źródło:
Chemical and Process Engineering; 2015, 36, 1; 113-120
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
NOx and SO2 emission during oxy-coal combustion
Autorzy:
Moroń, W.
Czajka, K.
Ferens, W.
Babul, K.
Szydełko, A.
Rybak, W.
Powiązania:
https://bibliotekanauki.pl/articles/184966.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
coal combustion
pollutant emissions
oxy atmosphere
spalanie węgla
emisji zanieczyszczeń
Opis:
The paper presents results of coal behaviour during combustion in oxy-fuel atmosphere. The experiment was performed using 3 meter long Entrained Flow Reactor and 1 meter long Drop Tube Reactor. Three hard coals and two lignites were analysed in order to investigate NOx, SO2 emission and fly ash burnout. The measurements were performed along and at the outlet of a combustion chamber for one– and two – stage combustion. In the second stage of the experiment, kinetic parameters for nitrogen evolution during combustion in oxy – fuel and air were calculated and the division of nitrogen into the volatile matter and the char was measured. The conducted experiment showed that emissions in oxy – fuel are lower than those in air.
Źródło:
Chemical and Process Engineering; 2013, 34, 3; 337-346
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technical and economic aspects of oxygen separation for oxy-fuel purposes
Autorzy:
Chorowski, M.
Gizicki, W.
Powiązania:
https://bibliotekanauki.pl/articles/240161.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
air separation
oxy-combustion
energy storage
separacja powietrza
spalanie w tlenie
magazynowanie energii
Opis:
Oxy combustion is the most promising technology for carbon dioxide, originated from thermal power plants, capture and storage. The oxygen in sufficient quantities can be separated from air in cryogenic installations. Even the state-of-art air separation units are characterized by high energy demands decreasing net efficiency of thermal power plant by at least 7%. This efficiency decrease can be mitigated by the use of waste nitrogen, e.g., as the medium for lignite drying. It is also possible to store energy in liquefied gases and recover it by liquid pressurization, warm-up to ambient temperature and expansion. Exergetic efficiency of the proposed energy accumulator may reach 85%.
Źródło:
Archives of Thermodynamics; 2015, 36, 1; 157-170
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxy-combustion of biomass in a circulating fluidized bed
Autorzy:
Kosowska-Golachowska, M.
Kijo-Kleczkowska, A.
Luckos, A.
Wolski, K.
Musiał, T.
Powiązania:
https://bibliotekanauki.pl/articles/240037.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
biomass
Salix viminalis
oxy-fuel combustion
CFB
TG/DTA
biomasa
wierzba wiciowa
spalanie tlenowe
Opis:
The objective of this study was to investigate combustion characteristics of biomass (willow, Salix viminalis) burnt in air and O2/CO2 mixtures in a circulating fluidized bed (CFB). Air and oxy-combustion characteristics of wooden biomass in CFB were supplemented by the thermogravimetric and differential thermal analyses (TGA/DTA). The results of conducted CFB and TGA tests show that the composition of the oxidizing atmosphere strongly influences the combustion process of biomass fuels. Replacing N2 in the combustion environment by CO2 caused slight delay (higher ignition temperature and lower maximum mass loss rate) in the combustion of wooden biomass. The combustion process in O2/CO2 mixtures at 30% and 40% O2 is faster and shorter than that at lower O2 concentrations.
Źródło:
Archives of Thermodynamics; 2016, 37, 1; 17-30
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of combustion of natural gas with 21–29% O2/CO2/N2mixtures on emission of carbon monoxide
Wpływ spalania gazu ziemnego w mieszankach 21–29% O2/CO2/N2 na emisję monotlenku węgla
Autorzy:
Kalicka, Z.
Jerzak, W.
Kawecka-Cebula, E.
Powiązania:
https://bibliotekanauki.pl/articles/204616.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
oxy combustion
natural gas
CO emission
gaz ziemny
spalanie gazu ziemnego
emisja monotlenku węgla
Opis:
Natural gas combustion was carried out in air enriched with oxygen in the amount of 25 and 29% with addition of CO2 in place of part of nitrogen. The research was carried out at different flow rates of gas and oxygen excess ratios. The concentration of CO and NOx was analyzed. It has not been proved that the increased oxygen concentration influences significantly the CO concentration. However, the addition of CO2 caused a substantial variability of CO concentration in the exhaust gas, in contrast to the concentration of NOx which decreased monotonically. Model calculations, performed with use of FactSage, indicate an increase in the concentration of CO not only for the air enriched with oxygen, but after adding CO2 too, as well.
Przeprowadzono spalanie gazu ziemnego w powietrzu wzbogaconym w tlen w ilości 25 i 29% z dodatkiem CO2 w miejsce części azotu. Badania prowadzono przy różnych przepływach gazu i współczynnikach nadmiaru tlenu. Analizowano stężenie CO oraz NOx. Nie stwierdzono, by zwiększone stężenie tlenu wpłynęło w sposób znaczący na stężenie CO. Natomiast dodatek CO2 spowodował znaczną zmienność stężenia CO w spalinach, w przeciwieństwie do stężenia NOx, które spadało monotonicznie. Obliczenia modelowe, przeprowadzone przy pomocy FactSage, wskazują na wzrost stężenia CO nie tylko dla powietrza wzbogaconego w tlen, ale także po dodaniu CO2.
Źródło:
Archives of Environmental Protection; 2013, 39, 4; 93-103
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermodynamic analysis of the advanced zero emission power plant
Autorzy:
Kotowicz, J.
Job, M.
Powiązania:
https://bibliotekanauki.pl/articles/240797.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AZEP
gas turbine
membrane reactor
oxy-combustion
CCS
turbina gazowa
reaktor membranowy
spalanie w tlenie
Opis:
The paper presents the structure and parameters of advanced zero emission power plant (AZEP). This concept is based on the replacement of the combustion chamber in a gas turbine by the membrane reactor. The reactor has three basic functions: (i) oxygen separation from the air through the membrane, (ii) combustion of the fuel, and (iii) heat transfer to heat the oxygen-depleted air. In the discussed unit hot depleted air is expanded in a turbine and further feeds a bottoming steam cycle (BSC) through the main heat recovery steam generator (HRSG). Flue gas leaving the membrane reactor feeds the second HRSG. The flue gas consist mainly of CO2 and water vapor, thus, CO2 separation involves only the flue gas drying. Results of the thermodynamic analysis of described power plant are presented.
Źródło:
Archives of Thermodynamics; 2016, 37, 1; 87-98
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD modeling of pulverized coal combustion in air and oxy atmosphere - NOx and SO2 formation
Modelowanie cfd spalania pyłu węglowego w atmosferze powietrza i oxy: powstawanie NOx i SO2
Autorzy:
Pawlak-Kruczek, H.
Zawiślak, M.
Powiązania:
https://bibliotekanauki.pl/articles/125693.pdf
Data publikacji:
2013
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
CFD modeling
coal combustion
radiation model
modelowanie
computational fluid dynamics
spalanie pyłu węglowego
OXY
radiacyjny model spalania
Opis:
Despite the fact that alternative energy sources sector has been rapidly developed since last years, coal combustion as a major fossil-fuel energy resource (especially in Poland) will continue being a major environmental concern for the next few decades. To meet future targets for the reduction of toxic and greenhouse gases emission new combustion technologies need to be developed: pre-combustion capture, post-combustion capture, and oxy-fuel combustion. This paper deals with the air-fried and oxy-fuel coal combustion (pulverized coal) combustion, and its impact on pollutants (NOx and SO2) formation. For CFD (Computational Fluid Dynamics) modeling of media flows and coal combustion process the laboratory model of combustion reactor was applied. The material input was set based on technical-elementary analysis of pulverized coal used in experiment and sieves grain-size analysis. Boundary conditions (media flows intensities and temperatures) were set based on laboratory experimental measurements. Radiation case-sensitive WSGGM model (weighted - sum - of - gray gases model) was used for calculation. The modeling was proceed for different combustion parameters in air and OXY atmosphere in oxygen/fuel ratio variation and fuel humidity variation function.
Pomimo faktu gwałtownego rozwoju sektora alternatywnych źródeł energii w ostatnich dziesięcioleciach, spalanie węgla jako najważniejszego źródła energii konwencjonalnej (w szczególności w Polsce) jest bardzo istotnym zagadnieniem w aspekcie ochrony i inżynierii środowiska. Nowe wyzwania w zakresie obniżania emisji związków toksycznych, a także gazów cieplarnianych wymuszają rozwój w zakresie innowacyjnych technologii spalania węgla: pierwotnych (na etapie substratów) oraz wtórnych (na etapie produktów), a także modyfikacji procesu spalania (atmosfera OXY). W artykule przedstawiono zagadnienie formowania się zanieczyszczeń (NOx oraz SO2) powstających podczas procesu spalania pyłu węglowego w atmosferze powietrza oraz atmosferze OXY. Do obliczeń metodą CFD (przepływu i spalania mieszanki powietrzno-węglowej wykorzystano model laboratoryjnego pieca opadowego. Jako warunki brzegowe do obliczeń zastosowano wyniki analiz techniczno-elementarnych pyłu węglowego, przedziały frakcyjne cząstek ustalono na podstawie analizy sitowej. Warunki brzegowe (temperaturę pieca, doprowadzanego powietrza oraz paliwa, natężenia przepływu powietrza pierwotnego i wtórnego) ustalono na podstawie pomiarów rzeczywistych w warunkach laboratoryjnych. W celu zamodelowania spalania z uwzględnieniem radiacji wykorzystano model WSGGM (weighted-sum-of-gray-gases model). Obliczenia z uwzględnieniem radiacji oraz powstawania zanieczyszczeń NOx i SO2 prowadzono dla warunków spalania w powietrzu oraz przyjęto zróżnicowane atmosfery OXY. Obliczenia prowadzono w funkcji wartości współczynnika lambda oraz dla różnych wartości wilgotności paliwa.
Źródło:
Proceedings of ECOpole; 2013, 7, 1; 149-154
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mercury content in ash of solid fuels
Autorzy:
Urbanek, B.
Szydełko, A.
Moroń, W.
Powiązania:
https://bibliotekanauki.pl/articles/115843.pdf
Data publikacji:
2014
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
mercury in coal
mercury in ash
oxy-fuel combustion
rtęć w węglu
rtęć w popiele
spalanie tlenowo-paliwowe
Opis:
Mercury emission field measurements were conducted for two types of coal from Polish mines. Total mercury content were evaluated in coal and ash on mercury analyzer atomic absorption spectrometer AMA 254. Obtained result shows that brown coal contains more mercury compared to hard coal (289 ppb and 66 ppb respectively for a polydisperse system). Mercury concentration in ashes is several times higher than for coal which means ash may be a good absorber for mercury. Also, application of oxy-fuel technology results in smaller amount of mercury absorbed in the ash which can be related to higher emission of Hg in the gaseous form.
Źródło:
Challenges of Modern Technology; 2014, 5, 2; 39-43
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coal Char Kinetics of Oxidation and Gasification Reactions
Autorzy:
Lewtak, R.
Hercog, J.
Powiązania:
https://bibliotekanauki.pl/articles/185256.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kinetic parameters
char particle oxidation and gasification
oxy-fuel combustion
parametry kinetyczne
utlenianie cząstek stałych
spalanie tlenowo-paliwowe
Opis:
Experimental investigations and numerical simulations have been conducted in this study to derive and test the values of kinetic parameters describing oxidation and gasification reactions between char carbon and O2 and CO2 occurring at standard air and oxy-fuel combustion conditions. Experiments were carried out in an electrically heated drop-tube at heating rates comparable to fullscale pulverized fuel combustion chambers. Values of the kinetic parameters, obtained by minimization of the difference between the experimental and modeled values of char burnout, have been derived and CFD simulations reproducing the experimental conditions of the drop tube furnace confirmed proper agreement between numerical and experimental char burnout.
Źródło:
Chemical and Process Engineering; 2017, 38, 1; 135-145
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Life cycle assessment analysis of supercritical coal power units
Autorzy:
Ziębik, A.
Hoinka, K.
Liszka, M.
Powiązania:
https://bibliotekanauki.pl/articles/240919.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CCS
dopalanie
LCA
ocena ekologiczna
spalanie tlenu
zużycie energii
cumulative energy consumption
ecological analysis
oxy-combustion
post-combustion
Opis:
This paper presents the Life Cycle Assessment (LCA) analysis concerning the selected options of supercritical coal power units. The investigation covers a pulverized power unit without a CCS (Carbon Capture and Storage) installation, a pulverized unit with a "post-combustion" installation (MEA type) and a pulverized power unit working in the "oxy-combustion" mode. For each variant the net electric power amounts to 600 MW. The energy component of the LCA analysis has been determined. It describes the depletion of non-renewable natural resources. The energy component is determined by the coefficient of cumulative energy consumption in the life cycle. For the calculation of the ecological component of the LCA analysis the cumulative CO2 emission has been applied. At present it is the basic emission factor for the LCA analysis of power plants. The work also presents the sensitivity analysis of calculated energy and ecological factors.
Źródło:
Archives of Thermodynamics; 2010, 31, 3; 115-130
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on co-combustion of sewage sludge and coal in oxy-fuel conditions
Badania współspalania mieszanek osadowo-węglowych w warunkach oxy-spalania
Autorzy:
Bień, Jurand D.
Bień, Beata
Czakiert, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/389373.pdf
Data publikacji:
2019
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
sewage sludge
co-combustion
oxy-fuel
sulfur and nitrogen conversion
osady ściekowe
współspalanie z węglem
spalanie tlenowe
współczynnik konwersji siarki i azotu
Opis:
Oxy-fuel co-combustion of municipal dried sewage sludge and coal was conducted to observe the combustion characteristics as well as pollutant emissions generated under different oxygen injection rate in oxy-fuel atmosphere in 0.1 MWt CFB reactor. As a feed gas a mixture of oxygen and carbon dioxide was used. Oxygen concentration in a feed gas varied from 21% to 30% per volume. The following blending ratios of sewage sludge to coal were chosen: 50%, 30% and 10%. Flue gas components were on-line measured by a gas analyzer, determining CO2, CO, SO2, SO3, NO2, NO, N2O, NH3, HCN concentrations by non-dispersive infrared absorption. During the study the influence of oxygen concentration in the gas atmosphere and the mass fraction of sewage sludge in the fuel blend on the emission of sulfur and nitrogen compounds in the O2/CO2 atmosphere with varied proportions of components in the blend were determined. It was found that oxygen concentration in the gas mixture has a significant influence on the process conditions. When the oxygen concentration in the gas mixture increased, the temperature of thermal processing of fuel blends was higher. The proportion of sewage sludge also affected the obtained profiles, which was particularly visible at 21% oxygen content in the gas mixture. Then the conversion ratios of nitrogen and sulfur contained in blending fuel to NO, NO2, N2O, NH3, HCN, SO2, SO3 and H2S were determined. This paper reports some of the major findings obtained from these research activities.
W ramach prac badawczych przeprowadzono proces współspalania komunalnych osadów ściekowych oraz węgla na wielkolaboratoryjnym stanowisku z cyrkulacyjną warstwą fluidalną CWF o mocy 0,1 MWt. Ich celem było rozpoznanie procesu ze szczególnym zwróceniem uwagi na emisję zanieczyszczeń generowanych w trakcie procesu. Badanie przeprowadzono w zmodyfikowanej atmosferze O2/CO2, gdzie stężenie tlenu zmieniano w zakresie od 21% do 35% objętościowo. Termicznemu przekształceniu poddawano mieszankę osadowo-węglowo, gdzie masowy udział osadów ściekowych wynosił odpowiednio 50%, 30% i 10%. Składniki spalin mierzono on-line za pomocą analizatora gazów, określając stężenia związków takich jak CO2, CO, SO2, SO3, NO2, NO, N2O, NH3, HCN, H2O, HCl, HF za pomocą niedyspersyjnej absorpcji w podczerwieni. Analizowano wpływ stężenia tlenu w atmosferze gazowej i frakcji masowej osadów ściekowych w mieszance paliwowej na emisję związków siarki i azotu w atmosferze O2/CO2 przy różnych proporcjach składników w mieszance. Stwierdzono, że stężenie tlenu w mieszaninie gazowej ma znaczący wpływ na warunki realizowanego procesu, a udział masowy osadów ściekowych wpływa na rodzaj substancji emitowanych do atmosfery. Stąd dla poszczególnych warunków procesu wyznaczono współczynniki konwersji azotu i siarki zawartych w mieszance paliwa na składniki gazowe NO, NO2, N2O, NH3, HCN, SO2, SO3 i H2S.
Źródło:
Ecological Chemistry and Engineering. A; 2019, 26, 1-2; 7-18
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computational fluid dynamic method in coal combustion modeling: pollutants formation in air and oxy atmosphere
Zastosowanie numerycznej mechaniki płynów w modelowaniu spalania węgla w atmosferze powietrza i oxy
Autorzy:
Pawlak-Kruczek, H.
Zawiślak, M.
Powiązania:
https://bibliotekanauki.pl/articles/388577.pdf
Data publikacji:
2013
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
CFD modeling
coal combustion
radiation model
hard coal
brown coal
modelowanie CFD
spalanie pyłu węglowego
węgiel kamienny
węgiel brunatny
OXY
radiacyjny model spalania
Opis:
Despite the fact that alternative energy sources sector has been rapidly developed since last years, coal combustion as a major fossil-fuel energy resource (especially in Poland) will continue being a major environmental concern for the next few decades. To meet future targets for the reduction of toxic and greenhouse gases emission new combustion technologies need to be developed: pre-combustion capture, post-combustion capture, and oxy-fuel combustion (the process of burning a fuel using pure oxygen instead of air as the primary oxidant). This paper deals with the air-fried and oxy-fuel hard and brown coal combustion (pulverized coal) combustion, and its impact on pollutants (NOx and SO2) formation. For CFD modeling of media flows and hard and brown coal combustion process the laboratory model of combustion reactor was applied. The material input was set based on technical-elementary analysis of pulverized coal used in experiment and sieves grain-size analysis. Boundary conditions (media flows intensities and temperatures). was set based on laboratory experimental measurements. Radiation case-sensitive WSGGM model (weighted – sum – of – gray – gases model) was used for calculation. The modeling was proceed for different combustion parameters in air and OXY atmosphere in oxygen/fuel ratio variation and fuel humidity variation function.
Pomimo faktu gwałtownego rozwoju sektora alternatywnych źródeł energii w ostatnich dziesięcioleciach, spalanie węgla jako najważniejszego źródła energii konwencjonalnej (w szczególności w Polsce) jest bardzo istotnym zagadnieniem w aspekcie ochrony i inżynierii środowiska. Nowe wyzwania w zakresie obniżania emisji związków toksycznych, a także gazów cieplarnianych wymuszają rozwój w zakresie innowacyjnych technologii spalania węgla: pierwotnych (na etapie substratów) oraz wtórnych (na etapie produktów), a także modyfikacji procesu spalania (atmosfera OXY). W artykule zajęto się zagadnieniem formowania się zanieczyszczeń (NOx oraz SO2) powstających podczas procesu spalania pyłu węgla kamiennego i brunatnego w atmosferze powietrza oraz atmosferze OXY. Do obliczeń CFD przepływu i spalania mieszanki powietrzno-węglowej wykorzystano model laboratoryjnego pieca opadowego. Jako warunki materiałowe do obliczeń posłużono się rzeczywistymi analizami techniczno-elementarnymi pyłu węglowego. Przedziały frakcyjne cząstek ustalono na podstawie analizy sitowej. Warunki brzegowe (temperaturę pieca, doprowadzanego powietrza oraz paliwa, natężenia przepływu powietrza pierwotnego i wtórnego) ustalono na podstawie pomiarów rzeczywistych w warunkach laboratoryjnych. W celu zamodelowania spalania z uwzględnieniem radiacji wykorzystano model WSGGM (weighted – sum – of – gray – gases model). Obliczenia z uwzględnieniem radiacji oraz powstawania zanieczyszczeń NOx i SO2 prowadzono dla warunków spalania w powietrzu oraz przyjęto różnicowane atmosfery OXY. Obliczenia prowadzono w funkcji wartości współczynnika lambda oraz dla różnych wartości wilgotności paliwa.
Źródło:
Ecological Chemistry and Engineering. A; 2013, 20, 4-5; 453-460
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermodynamic analysis of the double Brayton cycle with the use of oxy combustion and capture of CO2
Autorzy:
Ziółkowski, P.
Zakrzewski, W.
Badur, J.
Kaczmarczyk, O.
Powiązania:
https://bibliotekanauki.pl/articles/240714.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Inverse Brayton cycle
Brayton cycle
gas-steam unit
oxy combustion
CCS
thermodynamic analysis
numerical analysis
CFM
Obieg Braytona-Joule'a
blok gazowo-parowy
spalanie w tlenie
analiza termodynamiczna
analiza numeryczna
Opis:
In this paper, thermodynamic analysis of a proposed innovative double Brayton cycle with the use of oxy combustion and capture of CO2, is presented. For that purpose, the computation flow mechanics (CFM) approach has been developed. The double Brayton cycle (DBC) consists of primary Brayton and secondary inverse Brayton cycle. Inversion means that the role of the compressor and the gas turbine is changed and firstly we have expansion before compression. Additionally, the workingfluid in the DBC with the use of oxy combustion and CO2 capture contains a great amount of H2O and CO2, and the condensation process of steam (H2O) overlaps in negative pressure conditions. The analysis has been done for variants values of the compression ratio, which determines the lowest pressure in the double Brayton cycle.
Źródło:
Archives of Thermodynamics; 2013, 34, 2; 23-38
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies