Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "nickel superalloy" wg kryterium: Temat


Tytuł:
Damage development of Inconel 718 due to laboratory simulated creep
Autorzy:
Makowska, K.
Brodecki, A.
Mackiewicz, S.
Kowalewski, Z. L.
Powiązania:
https://bibliotekanauki.pl/articles/949297.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
creep
nickel superalloy
microstructure
pre-deformation
hardness
acoustic birefringence
Opis:
The paper presents an attempt of application of the acoustic birefringence coefficient for early stage degradation assessment of Inconel 718 nickel superalloy after short-term creep. It is shown that it can serve as a good damage sensitive parameter and, moreover, it can be well correlated with hardness variation.
Źródło:
Journal of Theoretical and Applied Mechanics; 2018, 56, 3; 893-896
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of interrupting the brazing process of Hastelloy X superalloy on the properties of the joint
Autorzy:
Krystek, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/2032796.pdf
Data publikacji:
2021
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
vacuum brazing
Hastelloy X
nickel superalloy
lutowanie próżniowe
nadstop niklu
Opis:
In this paper, disruption of brazing process impact on behavior of filler metal and properties of the joint was investigated. Hastelloy X sheet samples were brazed using Ni-13Cr-4Fe-4Si-2,7B filler alloy. Two identical sets of samples were heated in high vacuum, once load reached specified temperature process was interrupted. Subsequently, one set of samples was tested and second set was subjected to rebrazing in proper time and temperature, dedicated for used filler material. Disruption of the process in following temperature was analyzed: 930, 960, 1050, 1127, 1145, 1170°C. After both processes macroscopic observations of joint, peel test, static tensile test and spreadability analysis were carried out.
Źródło:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika; 2021, z. 93 [302]; 31-40
0209-2689
2300-5211
Pojawia się w:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Silicon Carbide Chills in Controlling the Solidification Process of Casts Made of IN-713C Nickel Superalloy
Autorzy:
Szeliga, D.
Kubiak, K.
Cygan, R.
Ziaja, W.
Powiązania:
https://bibliotekanauki.pl/articles/379538.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicon carbide
precision casting
porosity
nickel superalloy
węglik krzemu
odlewanie precyzyjne
porowatość
Opis:
The paper presents the method of manufacturing casts made of the IN-713C nickel superalloy using the wax lost investment casting process and silicon carbide chills. The authors designed experimental casts, the gating system and selected the chills material. Wax pattern, ceramic shell mould and experimental casts were prepared for the purposes of research. On the basis of the temperature distribution measurements, the kinetics of the solidification process was determined in the thickened part of the plate cast. This allowed to establish the quantity of phase transitions which occurred during cast cooling process and the approximate values of liquidus, eutectic, solidus and solvus temperatures as well as the solidification time and the average value of cast cooling rate. Non-destructive testing and macroscopic analysis were applied to determine the location and size of shrinkage defects. The authors present the mechanism of solidification and formation of shrinkage defects in casts with and without chills. It was found that the applied chills influence significantly the hot spots and the remaining part of the cast. Their presence allows to create conditions for solidification of IN-713C nickel superalloy cast without shrinkage defects.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2s; 105-111
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of surface and volume modification of nickel superalloys IN-713C and MAR-247 on high temperature creep resistance
Autorzy:
Cieśla, M.
Binczyk, F.
Mańka, M.
Powiązania:
https://bibliotekanauki.pl/articles/380339.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nadstop niklu
makrostruktura
właściwości mechaniczne
pełzanie
nickel superalloy
macrostructure
modification
mechanical properties
creep
Opis:
Impact of surface and volume modification and double filtration during pouring the moulds on basic mechanical properties and creep resistance of nickel superalloys IN-713C and MAR-247 in conditions of accelerated creep of castings made of post-production scrap of these alloys is evaluated in this paper. The conditions of initiation and propagation of cracks in the specimens were analysed with consideration of stereological properties of material macro- and microstructure. It has been proven that in the conditions of high-temperature creep at 980 C and at stress [...] = 150 MPa, creep resistance of superalloy MAR-247 is more than 10 times higher than the creep resistance of IN-713C alloy. In case of IN-713C alloy, the creep resistance negligibly depends on macrograin sizes. But, the macrograin size considerably affects the time to failure of specimens made of alloy MAR-247. Creep resistance of specimens made of coarse grain material was 20% higher than the resistance of fine grain materials.
Źródło:
Archives of Foundry Engineering; 2012, 12, 4; 17-24
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of nickel superalloys on castings for conventional energy equipment items
Zastosowanie nadstopow niklu na odlewy elementow konwencjonalnych urzadzen energetycznych
Autorzy:
Pirowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/793224.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
cast nickel superalloy
manufacturing technique
mechanical property
microstructure
dispersion hardening
energy
power plant
new generation
Opis:
The actions that can mitigate the adverse effects of various energy crises are continuous improvements in the efficiency of power generation plants. This can be achieved by carrying out the processes at an always higher temperature and pressure, and in a more aggressive environment than the parameters used so far. Such requirements cannot be satisfied any longer by the iron-based alloys, even the best ones. Therefore, multi-component alloys based on nickel and cobalt start to be the materials of choice. On the other hand, new materials of higher performance life are searched for all the time. Jointly with its American partners, the Foundry Research Institute in Krakow carries out the research works which, among others, aim at the conversion of both material and techno-logy from structures forged and welded in nickel superalloys to cast elements for operation under the most demanding conditions of the power plants of a new generation. A part of the research is done under an “A-USC - NICKEL” American programme, to participation in which the Foundry Research Institute has been invited. Within this programme, the initial studies have already been carried out to master the technique of melting and casting the Inconel 740 alloy and preliminary material testing has been performed on the ready castings. It has been stated, among others, that with the temperature increase, particularly above 700°C, this alloy when used as a cast material is characterised by a definitely less drastic decrease of tensile strength than the same alloy subject to plastic forming.
Elementem mogącym łagodzić skutki różnych kryzysów energetycznych jest ciągłe zwiększanie sprawności urządzeń energetycznych. Można to uzyskać prowadząc procesy technologiczne w coraz wyższej temperaturze, ciśnieniu i agresywniejszym środowisku niż stosowane dotychczas. Takim wymogom nie mogą sprostać już stopy na bazie żelaza, nawet najlepsze z nich pod tym względem. Sięga się tu po wieloskładnikowe stopy na bazie niklu i kobaltu. Powstają wciąż nowe tworzywa o coraz większej trwałości eksploatacyjnej. Instytut Odlewnictwa w Krakowie wspólnie z partnerami amerykańskimi prowadzi prace badawcze, których celem jest między innymi dokonanie konwersji materiałowej i technologicznej konstrukcji kuto-spawanych wykonywanych z nadstopów niklu, na elementy odlewane z przeznaczeniem do pracy w najtrudniejszych warunkach eksploatacyjnych urządzeń energetycznych nowej generacji. Jest ona realizowana między innymi w ramach amerykańskiego programu „A-USC – NICKEL”, do prac, w którym został zaproszony Instytut Odlewnictwa. W ramach tych prac wykonano już wstępne badania polegające na opanowaniu techniki topienia i odlewania stopu Inconel 740 oraz przeprowadzono wstępne badania materiałowe wykonanych odlewów. Stwierdzono między innymi, że ze wzrostem temperatury, zwłaszcza powyżej 700°C, stop ten, jako stop odlewniczy wykazuje zdecydowanie mniejszy spadek wytrzymałości na rozciąganie niż analogiczny stop przerabiany plastycznie.
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2011, 11C
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical properties and creep resistance of nickel alloys after complex modification and double filtration
Autorzy:
Binczyk, F.
Gradoń, P.
Mańka, M.
Powiązania:
https://bibliotekanauki.pl/articles/382498.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nadstop niklu
makrostruktura
modyfikacja
filtracja
twardość
odporność na pełzanie
nickel superalloy
macrostructure
modification
filtration
hardness
creep behaviour
Opis:
The paper presents the results of studies to determine the effect of complex surface and bulk modification and double filtration during mould pouring on the stereological parameters of macrostructure and mechanical properties of castings made from the post-production waste IN-713C and the MAR-247 nickel alloys. The evaluation covered the number of grains per 1mm2 of the sample surface area, the average area of grains and the shape index, hardness HB, tensile strength and resistance to high temperature creep. The results indicate the possibility of controlling the stereological parameters of macrostructure through application of several variants of the modification, controlling in this way also different low- and high-temperature properties. The positive effect of double filtration of the alloy during mould pouring on the metallurgical quality and mechanical properties of castings has also been emphasized.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2; 5-8
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dendritic Structure Analysis of CMSX-4 Cored Turbine Blades Roots
Autorzy:
Krawczyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/355017.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
single-crystalline turbine blades
nickel-base superalloy
dendritic structure
x-ray topography
SEM
Opis:
The microstructure of as-cast cored turbine blades roots, made of the single-crystal CMSX-4 nickel-based superalloy was investigated. Analysed blades were obtained by directional solidification technique in the industrial ALD Bridgman induction furnace. The investigations of the microstructure of blades roots were performed using SEM and X-ray techniques including diffraction topography with the use of Auleytner method. Characteristic shapes of dendrites with various arrangement were observed on the SEM images taken from the cross-sections, made transversely to the main blades axis. The differences in quality of the structure in particular areas of blades roots were revealed. Based on the results, the influence of cooling bores on blades root structure was analysed and the changes in the distribution and geometry of cooling bores were proposed.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2B; 1129-1134
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Durability of MAR-247 and IN-713C Nickel Superalloys under Cyclic Creep Conditions
Autorzy:
Cieśla, M.
Binczyk, F.
Junak, G.
Mańka, M.
Gradoń, P.
Powiązania:
https://bibliotekanauki.pl/articles/380030.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel superalloy
macrostructure modification
heat treatment
low-cycle fatigue
cyclic creep
nadstop niklu
modyfikacja makrostruktury
obróbka cieplna
zmęczenie niskocyklowe
pełzanie cykliczne
Opis:
Paper presents the assessment of impact of heat treatment on durability in low-cycle fatigue conditions (under constant load) in castings made using post-production scrap of MAR-247 and IN-713C superalloys. Castings were obtained using modification and filtration methods. Additionally, casting made of MAR-247 were subjected to heat treatment consisting of solution treatment and subsequent aging. During low-cycle fatigue test the cyclic creep process were observed. It was demonstrated that the fine-grained samples have significantly higher durability in test conditions and , at the same time, lower values of plastic deformation to rupture Δ□pl. It has been also proven that durability of fine-grained MAR-247 samples can be further raised by about 60% using aforementioned heat treatment.
Źródło:
Archives of Foundry Engineering; 2015, 15, 4; 17-20
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of metallurgical quality of master heat IN-713C nickel alloy ingots
Autorzy:
Binczyk, F.
Cwajna, J.
Roskosz, S.
Gradoń, P.
Powiązania:
https://bibliotekanauki.pl/articles/380351.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
analiza termiczna (ATD)
nadstop niklu
krzepnięcie odlewu
wtrącenia niemetaliczne
ATD thermal analysis
nickel superalloy
master heat ingot
solidification
non-metallic inclusions
Opis:
The paper presents the results of evaluation of the metallurgical quality of master heat ingots and of the identification of non-metallic inclusions (oxides of Al., Zr, Hf, Cr, etc.), which have been found in the shrinkage cavities formed in these ingots. The inclusions penetrate into the liquid alloy, and on pouring of mould are transferred to the casting, especially when the filtering system is not sufficiently effective. The specific nature of the melting process of nickel and cobalt alloys, carried out in vacuum induction furnaces, excludes the possibility of alloy refining and slag removal from the melt surface. Therefore, to improve the quality of castings (parts of aircraft engines), it is so important to evaluate the quality of ingots before charging them into the crucible of an induction furnace. It has been proved that one of the methods for rapid quality evaluation is an ATD analysis of the sample solidification process, where samples are taken from different areas of the master heat ingot. The evaluation is based on a set of parameters plotted on the graph of the dT/dt derivative curve during the last stage of the solidification process in a range from TEut to Tsol.
Źródło:
Archives of Foundry Engineering; 2012, 12, 4; 5-10
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of DSC Method in Studies on Phase Transitions of Ni Superalloys
Autorzy:
Przeliorz, R.
Piątkowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/382295.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative material
innovative technology
nickel superalloy
differential scanning calorimetry
specific heat
innowacyjny materiał
technologia innowacyjna
nadstop niklu
skaningowa kalorymetria różnicowa
ciepło właściwe
Opis:
The paper presents results of calorimetric studies of foundry nickel superalloys: IN100, IN713C, Mar-M247 and ŻS6U. Particular attention was paid to determination of phase transitions temperatures during heating and cooling. The samples were heated to a temperature of 1500°C with a rate of 10°C min–1 and then held at this temperature for 5 min. After a complete melting, the samples were cooled with the same rate. Argon with a purity of 99.99% constituted the protective atmosphere. The sample was placed in an alundum crucible with a capacity of 0.45 cm3. Temperature and heat calibration was carried out based on the melting point of high-purity Ni. The tests were carried out by the differential scanning calorimetry (DSC) using a Multi HTC high-temperature calorimeter from Setaram. Based on the DSC curves, the following temperatures were determined: solidus and liquidus, dissolution and precipitation of the γ’ phase, MC carbides and melting of the γ’/γ eutectic. In the temperature range of 100-1100°C, specific heat capacity of the investigated superalloys was determined. It was found that the IN713C and IN100 alloys exhibit a higher specific heat while compared to the Mar-M247 and ŻS6U alloys.
Źródło:
Archives of Foundry Engineering; 2017, 17, 4; 133-136
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ceramic filters for bulk inoculation of nickel alloy castings
Autorzy:
Binczyk, F.
Śleziona, J.
Gradoń, P.
Powiązania:
https://bibliotekanauki.pl/articles/379709.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel superalloy
ceramic filter
CoAl2O4 inoculant
compression strength
nadstop niklu
filtr ceramiczny
inokulant CoAl2O4
wytrzymałość na ściskanie
Opis:
The work includes the results of research on production technology of ceramic filters which, besides the traditional filtering function, play also the role of an inoculant modifying the macrostructure of cast nickel alloys. To play this additional role, filters should demonstrate sufficient compression strength and ensure proper flow rate of liquid alloy. The role of an inoculant is played by cobalt aluminate introduced to the composition of external coating in an amount from 5 to 10 wt.%. The required compression strength (over 1MPa) is provided by the supporting layers, deposited on the preform, which is a polyurethane foam. Based on a two-level fractional experiment 24-1, the significance of an impact of various technological parameters (independent variables) on selected functional parameters of the ready filters was determined. Important effect of the number of the supporting layers and sintering temperature of filters after evaporation of polyurethane foam was stated.
Źródło:
Archives of Foundry Engineering; 2011, 11, 3 spec.; 29-32
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of Grain Growth in 718 Ni-Base Superalloy
Kinetyka wzrostu ziaren w nadstopie niklu 718
Autorzy:
Huda, Z.
Zaharinie, T.
Metselaar, H. S. C.
Ibrahim, S.
Min, Goh J.
Powiązania:
https://bibliotekanauki.pl/articles/352555.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel-base superalloy
microstructures
grain growth
kinetics
activation energy
nadstop niklu
mikrostruktura
wzrost ziaren
kinetyka
energia aktywacji
Opis:
The Haynes® 718 Ni-base superalloy has been investigated by use of modern material characterization, metallographic and heat treatment equipment. Grain growth annealing experiments at temperatures in the range of 1050 – 1200 oC (1323–1473K) for time durations in the range of 20 min-22h have been conducted. The kinetic equations and an Arrhenius-type equation have been applied to compute the grain-growth exponent n and the activation energy for grain growth, Qg, for the investigated alloy. The grain growth exponent, n, was computed to be in the range of 0.066-0.206; and the n values have been critically discussed in relation to the literature. The activation energy for grain growth, Qg, for the investigated alloy has been computed to be around 440 kJ/mol; and the Qg, data for the investigated alloy has been compared with other metals and alloys and ceramics; and critically analyzed in relation to our results.
Nadstop na bazie niklu Haynes ® 718 badano przy użyciu nowoczesnych urządzeń do charakterystyki materiałów, metalografii i obróbki cieplnej. Przeprowadzono badania wzrostu ziarna podczas wyżarzania w zakresie temperatur 1050 - 1200 ° C (1323-1473K) w czasie trwania od 20 minut do 22 godzin. Równania kinetyczne i równanie typu Arrheniusa zostały zastosowane do obliczania wykładnika wzrostu ziarna n oraz energii aktywacji wzrostu ziarna, Qg, dla badanego stopu. Obliczona wartość wykładnika wzrostu ziarna, n, mieści się w zakresie od 0.066 do 0.206 i została krytycznie przedyskutowana w odniesieniu do literatury. Obliczona energia aktywacji wzrostu ziaren, Qg, wynosi dla badanego stopu na około 440 kJ / mol. Dane Qg dla badanego stopu porównywano z danymi dla innych metali, stopów i ceramiki oraz krytycznie analizowano w odniesieniu do naszych wyników.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 3; 847-852
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The control of solidification kinetics of the vacuum-cast thin-wall nickel-based superalloys by changing the geometrical characteristics of the ceramic mold
Autorzy:
Cygan, R.
Szeliga, D.
Rokicki, P.
Sieniawski, J.
Suchy, J. S.
Powiązania:
https://bibliotekanauki.pl/articles/381982.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel based superalloy
ceramic mold
thin walled casting
investment casting
nadstop niklu
forma ceramiczna
odlewanie cienkościenne
odlewanie precyzyjne
Opis:
This paper provides an analysis of experimental research and results of investment casting process. Temperature field in a ceramic mold is one of the problems during numerical simulation. Reducing the costs of production in precision casting involves the reduction of scraps, which is one of the fundamental problems of the foundry industry. Reducing these costs is associated with optimization of precision casting technology of aircraft engines critical parts, including control of the solidification front in thin-walled castings of nickel super alloys cast in a vacuum. It is achieved by changing the geometrical characteristics of the ceramic mold. The results of the tests were used to optimize the industrial production of aircraft components in Precision Foundry of WSK Rzeszów. Temperature distribution gained in the conducted tests allowed verification and optimization of computer simulations.
Źródło:
Archives of Foundry Engineering; 2013, 13, 4; 21-28
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Transformations in Nickel base Superalloy Inconel 718 during Cyclic Loading at High Temperature
Autorzy:
Jambor, M.
Bokuvka, O.
Novy, F.
Trsko, L.
Belan, J.
Powiązania:
https://bibliotekanauki.pl/articles/111867.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
nickel base superalloy
Inconel 718
phase transformations
high temperature fatigue
nadstop na bazie niklu
przemiany fazowe
zmęczenie cieplne
zmęczenie materiału
Opis:
Nickel base superalloys are hi-tech materials intended for high temperature applications. This property owns a complex microstructure formed by matrix of Ni and variety of precipitates. The type, form and the amount of these phases significantly affect the resulting properties of these alloys. At sufficiently long exposure to high temperatures, the transformation phase can occur, which can lead to degradation of properties of these alloys. A cyclic plastic deformation can accelerate these changes, and they could occur at significantly lower temperatures or in shorter time of exposure. The aim of this study is to describe phase transformation, which can occur by a cyclic plastic deformation at high temperatures in nickel base superalloy Inconel 718.
Źródło:
Production Engineering Archives; 2017, 15; 15-18
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical forecasting composition of secondary carbides in the single-crystal superalloys
Autorzy:
Glotka, O.A.
Olshanetskii, V.I.
Powiązania:
https://bibliotekanauki.pl/articles/2175759.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
single-crystal nickel-based superalloy
alloying system
CALPHAD method
structure
composition of secondary carbides
krystaliczny nadstop na bazie niklu
układ stopowy
metoda CALPHAD
struktura
skład węglików wtórnych
Opis:
Purpose: Predicting the specifics of the distribution of alloying elements between secondary carbides, their topology, and morphology, as well as the composition for a single-crystal multicomponent system of the type Ni-11.5Cr-5Co-3.6Al-4.5Ti-7W-0.8Mo-0.06C using the calculated CALPHAD (passive experiment) versus scanning electron microscopy (active experiment). Design/methodology/approach: This work presents the results of studies of the distribution of chemical elements in the composition of carbides, depending on their content in the system. The studies were carried out using an electron microscope with computer analysis of images and chemical composition. Findings: It was found that the influence of alloying elements on the composition of carbides is complex and is described by complex dependencies that correlate well with the obtained experimental results. Research limitations/implications: An essential problem is the prediction of the structure and properties of superalloys without or with a minimum number of experiments. Practical implications: The obtained dependencies can be used both for designing new superalloys and for improving the compositions of industrial alloys. Originality/value: The value of this work is that the obtained dependences of the influence of alloying elements on the dissolution (precipitation) temperatures and the distribution of elements in secondary carbides in the superalloy of the Ni-11.5Cr-5Co-3.6Al-4.5Ti-7W- 0.8Mo-0.06C system. It was found that changes in the course of the curves of temperature dependence on the element content closely correlate with thermodynamic processes occurring in the system, that is, the curves exhibit extrema accompanying the change in the stoichiometry of carbides or the precipitation of new phases.
Źródło:
Archives of Materials Science and Engineering; 2021, 111, 1; 34--41
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies