Temat: magnetic particles - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Implantation of superabsorbent polymer by magnetic iron oxide particles
Autorzy:: Grzesiak, Maciej
Szajnecki, Łukasz
Powiązania:: https://bibliotekanauki.pl/articles/2079886.pdf
Data publikacji:: 2019
Wydawca:: Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:: superabsorbents
hydrogels
magnetic particles
swelling properties
Opis:: The aim of this research was to optimise methods of magnetic particles of iron oxides implantation into superabsorbent polymer based on partially neutralized acrylic acid (SAc/AAc) crosslinked with ethylene glycol dimethacrylate (EGDMA). The structure of the obtained materials was confirmed by infrared spectroscopic analysis (FT-IR/ATR). The quality of implantation process was evaluated on the basis of microscopy images. Swelling properties of the obtained implanted materials were also determined.
Źródło:: Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia; 2019, 74, 2; 101-113
2083-358X
Pojawia się w:: Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Impact of magnetic particles concentration in ferrooil on its magnetic susceptibility coefficient χ
Autorzy:: Frycz, M.
Anioł, A.
Powiązania:: https://bibliotekanauki.pl/articles/241625.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
magnetic particles concentration
magnetic susceptibility coefficient
Opis:: The purpose of this article is to determine the effect of the concentration of magnetic particles in ferro-oil on the value of its magnetic susceptibility coefficient χ. Determination of the flow and operating parameters of slide journal bearings lubricated with ferro-oils requires, inter alia, designation the first magnetization N and the magnetic induction B vector components, dependent on the magnetic propertis of the lubricant. The fundamental problem lies in the inability to make direct accurate measurement of magnetic induction in the lubricating gap of slide bearing and its solution is to determine it on the analytical and numerical way. A key issue for the accuracy of such solutions is to obtain reasonably accurate values of magnetic susceptibility χ. This article attempts to determine these values and estimate their relationship with the concentration of magnetic particles concentration in ferro-oil being potential lubricant above-mentioned bearings. In this paper, the authors present the characteristic of experimental test benches to determine the coefficients of the magnetic susceptibility. They present method of determining this value from obtained measurement data and analyse the impact of the magnetic particles concentration in ferro-oil on its magnetic susceptibility values. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 2%, 4%, 6% and 8% and the tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant.
Źródło:: Journal of KONES; 2014, 21, 4; 111-117
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 2
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243733.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine and describe the viscosity characteristics of the ferro-oils at context of temperature changes depend on different concentrations of magnetic particles. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. In Part I of the paper there was determined and described four mathematical-physical models of fittings of the viscosity characteristics: exponential, fourth-degree polynomial and two homographic models – second- and third-degree. In present Part II of the paper above mentioned models have been developed. That has been done their depending on parameter of concentrations of magnetic particles ϕ in ferro-oil. There have been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Pennzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver. 9.1. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters such as temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 3; 127-134
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 1
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243457.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles at context of temperature changes. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver.9.1. There has been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Moreover, the waveform parameters of functions have been determined and their assessed quality has been done also. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters like temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 2; 113-120
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Vorticity transport analysis in magnetic viscoelastic fluid
Autorzy:: Kumar, P.
Mohan, H.
Hoshoudy, G.
Powiązania:: https://bibliotekanauki.pl/articles/281534.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: Rivlin-Ericksen viscoelastic fluid
suspended magnetic particles
vorticity
Opis:: Results of investigation on the transport of vorticity in Rivlin-Ericksen viscoelastic fluid in the presence of suspended magnetic particles is presented here. Equations governing the transport of vorticity in Rivlin-Ericksen viscoelastic fluid in the presence of suspended magnetic particles are obtained from the equations of magnetic fluid flow. From these equations it follows that the transport of solid vorticity is coupled with the transport of fluid vorticity. Further, we find that because of thermokinetic process, fluid vorticity may exist in the absence of solid vorticity, but when fluid vorticity is zero, then solid vorticity is necessarily zero. A two-dimensional case is also studied and found that the fluid vorticity is indirectly influenced by the temperature and the magnetic field gradient.
Źródło:: Journal of Theoretical and Applied Mechanics; 2016, 54, 1; 127-133
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Models of viscosity characteristics η=η(b) of ferro-oil with different concentration of magnetic particles in the presence of external magnetic field
Autorzy:: Frycz, M.
Czaban, A.
Powiązania:: https://bibliotekanauki.pl/articles/244776.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
external magnetic field
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles in the presence of an external magnetic field interaction. These characteristics are defined in the context of magnetic induction changes. These rheological tests were performed on a Physica MCR 301 rheometer. It was used a measuring system ‘plate to plate’ type which was armed with magneto-rheological research system MRD 180/1T. The tests were performed for the selected temperature of the medium i.e. 90°C, the shear rate θ changes were carried from 0 to 1000 1/s. Changes of the magnetic field intensity value were ranged from 0 to 500 mT. The selected concentrations of magnetic particles in a ferro-oil were 1%, 2%, 4%, 6% and 8% and the tested ferro-oil was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. Analyses of the results, identify and matching characteristic were calculated using STATISTICA software. It has been proposed three categories of functions mapping the waveforms of the results obtained experimentally: the exponential function, logarithmic with basis of the normal and the polynomial function.
Źródło:: Journal of KONES; 2014, 21, 4; 119-126
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Fully coupled multi-physics modeling of the multi-type magnetic particles dynamic behavior in low intensity magnetic separator
Autorzy:: Wang, Feiwang
Zhao, Hongming
Dai, Huixin
Du, Wuxing
Powiązania:: https://bibliotekanauki.pl/articles/109730.pdf
Data publikacji:: 2019
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: multi-physics model
low-intensity magnetic separator
magnetic particles
dynamic behaviour
Opis:: Studying the dynamic behavior of magnetic particle suspensions in the low intensity magnetic separator has important implications for various mineral beneficiation processes. A new approach for fully coupled multi-physics modeling of the dynamic behavior of multi-type magnetic particles (MTMPs) is developed in the study. In this model, the particle tracing module is employed to identify and determine individual particle trajectories in the fluid and magnetic field, which are modelled through the COMSOL Multiphysics. The results show that the different arrangements of the permanent magnet assembly and the volume percentage of interlocked particles affect the dynamic behavior of MTMPs and the efficiency of the separation. The model is compared with experiments and the particle capture theory and the correctness of the solution obtained from COMSOL is demonstrated. The model gives new possibilities to control, optimise, and develop the process of LIMS.
Źródło:: Physicochemical Problems of Mineral Processing; 2019, 55, 1; 163-172
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of temperature changes
Autorzy:: Czaban, A.
Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/247080.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
temperature changes
external magnetic field
Opis:: There is presented an effect of the changes of the concentration of magnetic particles included in the ferro-oil on its dynamic viscosity in the presence of external magnetic field in this paper. The study was conducted in the context of temperature’s changes. The authors assume that the concentration of magnetic particles in ferro-oil can significantly affects its basic physical properties as dynamic viscosity, as well as the operational properties of journal sliding bearings ferro-oil’s lubricated. The equally significant as the above mentioned properties may affect the external environmental conditions of operation, especially temperature changes. In this context, an important technique’s issue appears to determine the principles of selection of optimal concentration of above mentioned particles according to the existing environmental conditions of its operation, or the expectations laid against the operation of the devices. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate-to-plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for four selected temperature range of 60º, 70º, 80º and 90ºC as regards changes an external magnetic field intensity 0-700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8%.
Źródło:: Journal of KONES; 2013, 20, 2; 55-60
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of shear rate’s variations
Autorzy:: Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/246160.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
rheometer
slide journal bearings
Opis:: The purpose of this study is to determine the effect of changes in the concentration of magnetic particles in ferrooil to change its physical properties, in particular the dynamic viscosity in a constant external magnetic field in terms of changes in shear rate and changes in the intensity of that field. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate -plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. The applied adapter enable to obtain almost homogeneous distribution of magnetic field strength. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for shear rate’s changes from 0 to 1000 1/s as regards changes an external magnetic field intensity 0–700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8% and the tested ferrofluid was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. The paper presents, in the form of graphs, the changes of ferro-oil’s dynamic viscosity as a function of shear rate and concentration of magnetic particles in the aspect of external magnetic field’s intensity changes. The results of research were also subjected to analysis. The obtained characteristics of ferro-oil’s viscosity show clear evidence of non-Newtonian properties of the liquids. There is observed progression of these properties with increasing of magnetic particles concentration. This fact indicates the essential effect of the addition mentioned particles to the change of the ferro-oil’s viscosity characteristics.
Źródło:: Journal of KONES; 2013, 20, 3; 139-144
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Haemocompatibility and cytotoxic studies of non-metallic composite materials modified with magnetic nano and microparticles
Autorzy:: Szymonowicz, M.
Rybak, Z.
Fraczek-Szczypta, A.
Paluch, D.
Rusak, A.
Nowicka, K.
Blazewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/306490.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: nanokompozyty
cząstki magnetyczne
hemoliza
żywotność komórkowa
koagulacja
nanocomposite
magnetic particles
polysulfone
haemolysis
cell viability
coagulation systems
Opis:: Purpose: Preventing the formation of blood clots on the surface of biomaterials and investigation of the reasons of their formation are the leading topics of the research and development of biomaterials for implants placed into the bloodstream. Biocompatibility and stability of a material in body fluids and direct effect on blood cell counts components are related both to the structure and physico-chemical state of an implant surface. The aim of this study was to determine haemocompatibility and cytotoxicity of polysulfone-based samples containing nano and micro particles of magnetite (Fe3O4). Methods: The polysulfone-based samples modified with nanometric and micrometric magnetite particles were examined. Physicochemical properties of the composites were determined by testing their wettability and surface roughness. The action of haemolytic, activation of coagulation system and cytotoxicity of composites was evaluated. Results: Wettability and roughness of materials were correlated with nanoparticles and microparticles content. In the tests of plasma coagulation system shortening of activated partial thromboplastin time for polysulfone with nano magnetite and with micro magnetite particles was observed in comparison with pure polysulfone. Prothrombine time and thrombine time values as well as fibrinogen concentration were unchanged. Haemolysis values were normal. Morphology and viability of cells were normal. Conclusions: Composites made from polysulfone modified with nanoparticles and microparticles of magnetite cause neither haemolytic nor cytotoxic reaction. These composites evoke plasma endogenous system activation.
Źródło:: Acta of Bioengineering and Biomechanics; 2015, 17, 3; 49-58
1509-409X
2450-6303
Pojawia się w:: Acta of Bioengineering and Biomechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Simple guide for the fluorescent suspensions pre-selection in MPI depends on ambient light conditions and surface roughness
Przewodnik doboru MPI zawiesin fluorescencyjnych w zależności od warunków oświetlenia i chropowatości powierzchni
Autorzy:: Yaremenko, Y.
Powiązania:: https://bibliotekanauki.pl/articles/107830.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: magnetic-particles inspection
contrast of magnetic inks indications
fluorescence of indications
badania magnetyczno-proszkowe
kontrast wskazań magnetycznych zawiesin
fluorescencyjne wskazania
Opis:: Taking into consideration the rising expectations and demands of various industries, the constant requirement arise of customizing existent solutions or developing new products for the need of nondestructive testing and evaluation. Following the philosophy to provide personnel and environment friendly test media, as core requirement for each new development, we engineer our new solutions taking into account different process conditions and safety regulations. In case of magnetic particles inspection, we propose variety of fluorescent suspensions tailored to maximize contrast of indications depends on surface roughness and ambient lighting conditions. In current paper, we would like to illustrate how external light conditions contribute to fluorescent indications appearance on different examination surfaces, and how detection media cope with these variables, maximizing contrast of indications and making interpretation process easier.
Biorąc pod uwagę rosnące oczekiwania i wymagania różnych branż, pojawia się stały wymóg przed dostosowywaniem istniejących rozwiązań lub opracowywaniem nowych produktów na potrzeby nieniszczących testów i oceny. Zgodnie z tą filozofią, jako podstawowego wymogu, w celu dostarczenia środków przyjaznych dla operatorów i środowiska badań, opracowujemy nowe rozwiązania uwzględniające różne warunki procesu i przepisy bezpieczeństwa. W przypadku użycia metody MPI (Magnetic Particle Inspection) proponujemy stosowanie różnorodnych zawiesin fluorescencyjnych by uzyskać maksymalizację kontrastu wskazań zależnych od chropowatości powierzchni i warunków oświetlenia otoczenia. W bieżącym artykule chcemy zilustrować, jak zewnętrzne warunki świetlne wpływają na wygląd wskaźników fluorescencyjnych na różnych powierzchniach badanych oraz jak media reagują na te zmienne, zwiększając kontrast wskazań i ułatwiając interpretację.
Źródło:: Badania Nieniszczące i Diagnostyka; 2017, 4; 3-6
2451-4462
2543-7755
Pojawia się w:: Badania Nieniszczące i Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Researching and modeling of the dynamic viscosity of the ferro-oils with the different concentrations of magnetic particles in the aspect of pressure changes
Badania i modelowanie lepkości dynamicznej ferro-olejów o różnym stężeniu cząstek magnetycznych w aspekcie zmian ciśnienia
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/190936.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferro-oil
magnetic particles concentration
pressure changes
models of viscosity
ferro-olej
stężenie cząstek magnetycznych
zmiany ciśnienia
modele lepkości
Opis:: In this article, the results of the experimental research of determining the dynamic viscosity of the ferro-oils with different concentration of the magnetic particles in terms of pressure change are presented. The research was conducted on the Thermo Scientific Haake Mars III rheometer in the configuration with a pressure chamber. The applied configuration allowed the author to conduct research on the change of viscosity for the selected pressure values p in range from 0 to 100 bars. The research was conducted for three selected temperature values, including t = 30°C, 60°C, and 90°C, as well as selected shear rates of 200 and 600s-1. The chosen concentration values of the magnetic particles were nCS = 1%, 2%, 4%, 6%, and 8%. The viscous characteristics gathered as a result of the research have been analysed with the aim of identifying the nature of the correlations and to create mathematical-physical models of changes in the dynamic viscosity of the ferrooils due to the change in pressure in terms of concentrations of the magnetic particles. Analysis, identification, and adaptation of the characteristics were conducted using the StatSoft STATISTICA ver. 9 software. Selected mathematical adaptations of the acquired results were submitted through the enhanced analysis. In addition, parameters of the course of functions were designated and their qualitative assessments were made.
W artykule zaprezentowane zostały wyniki eksperymentalnych badań wyznaczania lepkości dynamicznej ferro-olejów o różnym stężeniu cząstek magnetycznych w aspekcie zmian ciśnienia. Badania zostały przeprowadzone na reometrze Thermo Scientific Haake Mars III w konfiguracji z tzw. komorą ciśnieniową. Zastosowana konfiguracja pozwalała na prowadzenie badań zmian lepkości dla wybranych wartości ciśnienia p z zakresu od 0 do 100 bar. Badania przeprowadzono dla trzech wybranych wartości temperatur dla t = 30°C, 60°C oraz 90°C i wybranych prędkości ścinania: 200 oraz 600 s-1. Przyjęte wartości stężenia cząstek magnetycznych wynosiły nCS = 1%, 2%, 4%, 6% i 8%. Uzyskane w wyniku badań charakterystyki lepkościowe poddane zostały analizie zmierzającej do identyfikacji charakteru zależności i wykreowanie matematyczno-fizycznych modeli zmian lepkości dynamicznej ferro-olejów od zmian ciśnienia w aspekcie stężenia cząstek magnetycznych. Analizy, identyfikacji i dopasowania charakterystyk dokonano przy wykorzystaniu oprogramowania StatSoft STATISTICA wer. 9. Pogłębionej analizie poddano wyselekcjonowane dopasowania matematyczne uzyskanych wyników doświadczalnych. Wyznaczono ponadto parametry przebiegu funkcji i dokonano ich oceny jakościowej.
Źródło:: Tribologia; 2017, 272, 2; 39-48
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: The influence of temperature on coefficient of magnetic susceptibility χ of ferro-oils with different concentrations of magnetic particles
Wpływ temperatury na współczynnik podatności magnetycznej χ ferro-olejów o różnym stężeniu cząstek magnetycznych
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/188357.pdf
Data publikacji:: 2016
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferro-oil
magnetic susceptibility coefficient
magnetic particles concentration
slide journal bearings lubrication
ferrr-olej
współczynnik podatności magnetycznej
stężenie cząstek magnetycznych
smarowanie poprzecznych łożysk ślizgowych
Opis:: In this paper, the authors presented research concerning the determination of the relation between magnetic susceptibility coefficient χ of ferro-oil and temperature changes. The tests were conducted on the ferro-oil samples of various, chosen magnetic particles concentrations: 1%, 2%, 4%, 6%, and 8%. In accordance with the conclusions resulting from Curie-Weiss equation, the values of magnetic susceptibility χ depend on the physicochemical features of considered material, including the magnitude and amount (concentration) of magnetic particles and physical properties of its environment, i.e. the kind and direction of magnetic field and also on the operating temperature, which is the main subject of conducted tests in this paper. This article presents the structure of the bench used for experimental designation of magnetic susceptibility coefficient in relation to temperature changes of tested ferro-oil. Moreover, the authors demonstrated a method enabling the determination of these values from obtained measurement data, conducted the analysis of obtained results and presented the conclusions.
W niniejszym artykule zostały przedstawione badania dotyczące określenia zależności współczynnika podatności magnetycznej χ ferro-oleju od zmian temperatury. Badaniom poddane zostały próbki ferro-olejów o różnych, wybranych stężeniach cząstek magnetycznych: 1%, 2%, 4%, 6% i 8%. Zgodnie z wnioskami wynikającymi z równania Curie-Weissa wartości podatności magnetycznej χ zależą głównie od własnych cech fizykochemicznych rozpatrywanego materiału, w tym od wielkości i ilości (stężenia) cząstek magnetycznych oraz od fizycznych właściwości jego otoczenia, tj.: rodzaju i kierunku pola magnetycznego, jak również od temperatury pracy, która stanowi zasadniczy temat podjętych badań. W artykule zaprezentowana została budowa stanowiska do eksperymentalnego wyznaczenia współczynnika podatności magnetycznej w kontekście zmian temperatury badanego ferro-oleju. Ponadto zaprezentowana została metoda umożliwiająca wyznaczenie tych wartości z pozyskanych danych pomiarowych oraz dokonano analizy uzyskanych wyników zakończonej wnioskami.
Źródło:: Tribologia; 2016, 269, 5; 21-30
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Influence of magnetic particles concentration in ferro-oil on values of friction force and coefficient of friction of slide journal bearing
Autorzy:: Frycz, M.
Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/243124.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
friction force
friction coefficient
lepkość dynamiczna
stężenie cząstek magnetycznych
siła tarcia
współczynnik tarcia
Opis:: This article has been focused on the analysis of changes in friction force as well as coefficient of friction of slide journal bearing in terms of the concentration of magnetic particles in the lubricating ferro-oil. There has been present an analytical and numerical calculation model based on experimentally determined physical quantities describing the dependence of ferro-oil’s viscosity on fundamental parameters such as temperature, pressure or external magnetic field in the paper. Numerical calculations of the dimensionless friction force as well as the dimensionless friction coefficient were performed by solving the Reynold’s type equation using the finite difference method using Mathcad 15 and own calculation procedures. The obtained results has been presented in the form of a series of graphs that take into account: the influence of external magnetic field, corrections related to the influence of pressure changes, corrections related to the influence of temperature changes and finally corrections related to non-Newtonian ferro-oil properties. An analysis of the obtained characteristics has been made so the observations and conclusions were drawn regarding optimum magnetic particle content in the ferro-oil lubricating the sliding journal bearing.
Źródło:: Journal of KONES; 2017, 24, 1; 143-150
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Ultraviolet irradiation hazard aspects and proactive ways of its impact reduction on personnel performing penetrant or magnetic particles testing
Aspekty zagrożenia napromieniowaniem UV oraz aktywne sposoby redukcji jego oddziaływania na personel wykonujący badania penetracyjne lub magnetyczne
Autorzy:: Yaremenko, Y.
Powiązania:: https://bibliotekanauki.pl/articles/107925.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: fluorescent penetrant testing
magnetic-particles inspection
UV irradiation
personnel safety
fluorescencyjne testy penetracyjne
badania magnetyczno-proszkowe
promieniowanie UV
bezpieczeństwo personelu
Opis:: Ultraviolet (UV) irradiation is a part of interpretation process in fluorescent sub-methods of penetrant testing (PT) and magnetic particles inspection (MPI). Therefore exposure to UV and its hazard consequences should be considered by Health and Safety Executives inherently with test media hazards. UV filtered spectacles, masks and clothing which covers exposed parts of the body are essential part of protective measures for operators. Alongside with the operator, the risk of exposure for surrounding personnel is always existent. Therefore, comprehensive approach to protective measures is needed, and UV basics, UV harmful impact and types of artificial sources should be studied more thoroughly. This work analyzes hazard aspects of UV irradiation, compares UV irradiation influence emitted from different UV sources and offers to consider UV LED sources as proactive measure of UV exposure reduction on personnel.
Promieniowanie ultrafioletowe (UV) jest stałym elementem w procesie interpretacji wyników badań penetracyjnych (PT) oraz magnetycznoproszkowych (MP). Dlatego konieczne jest rozważenie skutków zagrożeń spowodowanych ekspozycją na promienie UV przez służby BHP. Okulary, maski i odzież, która obejmuje odsłonięte części ciała, są istotną częścią środków ochronnych dla operatorów. Ryzyko narażenia personelu uczestniczącego w badaniach istnieje zawsze. Dlatego kompleksowe podejście do środków ochronnych UV jest potrzebne, a szkodliwe oddziaływanie i rodzaje sztucznych źródeł promieniowania powinny być zbadane bardziej dokładnie. Ta praca analizuje aspekty zagrożenia napromieniowania UV, porównuje wpływ promieniowania ultrafioletowego emitowanego z różnych źródeł promieniowania UV i oferuje do rozważenia UV LED jako źródła aktywnego środka redukcji narażenia pracowników na promieniowanie UV.
Źródło:: Badania Nieniszczące i Diagnostyka; 2017, 1-2; 3-5
2451-4462
2543-7755
Pojawia się w:: Badania Nieniszczące i Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "magnetic particles" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język