Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "lateral stability" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
The influence of tongue weight of a trailer-mounted recreational vehicle on steering stability
Autorzy:
Li, Mengdi
Li, Di
Fu, Qiutao
Yang, Zhichen
Wang, Weiyuan
Powiązania:
https://bibliotekanauki.pl/articles/1839713.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
tongue weight
trailer-mounted recreational vehicle
lateral stability
Opis:
The influence of tongue weight on a Trailer-Mounted Recreational Vehicle (TMRV) is studied. A multi-body dynamic model of the TMRV was established, three typical vehicle stability tests were carried out. Tongue weight had different effects on the tractor and Recreational Vehicle (RV). According to different loads, the critical tongue weight range was given. In addition, the tongue weight of the existing models was optimized and suggestions for improvement were put forward. The analysis results show that the tongue weight should be within a reasonable range which can ensure the tractor understeer and keep the lateral stability of the RV.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 2; 203-213
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Freight car model with Y25 bogies stability analysis
Autorzy:
Dusza, Mirosław
Powiązania:
https://bibliotekanauki.pl/articles/32222551.pdf
Data publikacji:
2023-12-28
Wydawca:
Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
Tematy:
Y25 bogie
lateral stability
nonlinear critical velocity
suspension
derailment quotient
Opis:
Y25 (25Tn) bogies have been used in freight cars for over 50 years. It is a proven design with a positive opinion in many European countries. In addition to the generally positive opinion about the operational properties of the Y25 bogies, there are sometimes publications whose authors notice certain imperfections related mainly to the so-called running instability, resulting in derailment under certain motion conditions. This paper presents results simulation of motion tests of a freight car with Y25 bogies. A freight car model was created using the VI-Rail software. The research focus on determining the critical velocity and examining nature of the model solutions in the overcritical velocity range. Straight track as well as curved track motion is analysed. Empty and full wagon properties are considered. Impact of changes the suspension system selected parameters values on vehicle model solutions stability as well as the vehicle impact on track was analysed.
Źródło:
Rail Vehicles/Pojazdy Szynowe; 2023, 3-4; 13-24
0138-0370
2719-9630
Pojawia się w:
Rail Vehicles/Pojazdy Szynowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of pressure loss in steerable tyre wheel on steerability of four-axle special purpose vehicle
Wpływ utraty ciśnienia w ogumieniu koła kierowanego na kierowalność czteroosiowego pojazdu specjalnego
Autorzy:
Stryjek, P.
Motrycz, G.
Pieniążek, W.
Powiązania:
https://bibliotekanauki.pl/articles/347148.pdf
Data publikacji:
2013
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
AFVs
tires
pressure
damage
steady state circular test
steerability characteristics
double lane change
loss of lateral stability
transportery opancerzone
opony
ciśnienie
uszkodzenia
ustalona jazda po okręgu
podwójna zmiana pasa ruchu
charakterystyka kierowalności
utrata stateczności poprzecznej
Opis:
The authors of this paper took a part in a government research project on the behavior of a military AFV after an explosive damage to its tires, which inter alia aims to assess its motion-al abilities, also in terms of ensuring the safety of the crew. The results presented hereto refer to a part of preliminary experimental studies on a four-axle vehicle with a total weight of 22,000 kg and a length of 8m, carried out in the situations of a substantial or complete loss of tire pressure in the first steerable wheels axle. A significant influence of the total pressure loss in the drivability of the vehicle has been proven.
Autorzy niniejszej pracy uczestniczyli w rządowym projekcie badawczym dotyczącym problemu zachowania się transportera wojskowego po eksplozyjnym uszkodzeniu ogumienia, który miał na celu, między innymi, ocenę jego możliwości ruchowych, w aspekcie zapewnienia bezpieczeństwa załogi. Przedstawione wyniki dotyczą fragmentu wstępnych badań eksperymentalnych pojazdu czteroosiowego o masie całkowitej 22.000 kg i długości 8m, przeprowadzonych w sytuacjach znacznej lub całkowitej utraty ciśnienia w ogumieniu koła pierwszej osi kierowanej. Wykazano znaczny wpływ całkowitej utraty ciśnienia na kierowalność pojazdu.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2013, 4; 92-100
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of vehicle stability on road curves in winter conditions
Autorzy:
Kemzuraite, K.
Pukalskas, S.
Bureika, G.
Powiązania:
https://bibliotekanauki.pl/articles/247233.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vehicle stability
vehicle dynamics
road curve
road surface adhesion coefficient
lateral acceleration
road traffic safety
Opis:
The paper reveals peculiarities of a vehicle movement/operation on road curves when the road surface is slippery and/or snowy, with asphalt ruts. The survey of scientific works related to the lateral acceleration and movement dynamics of a vehicle is presented. Field experiments with different vehicles were carried out in winter conditions. The acceleration value and stability parameters depending on the speed of a vehicle and adhesion coefficient on road curves are analysed. Dependence of the vehicle lateral acceleration on road curves with various adhesion surfaces are given in graphical charts. Recommendations how to improve road safety by limitation of the speed in winter conditions are formulated. Finally, basic conclusions are given. Handling the vehicle on the road with the compressed snow surface (on the curve of the radius of 120 m) is much more dangerous when the adhesion coefficient of the wheels and the road is low if compared to handling the vehicle along the dry ruts at the same speed. When the vehicle moves along the curve of 120 m radius at a speed of 70 km/h, and the road surface is snowy, the lateral acceleration of 3.1 m/s2 is reached. The paper indicates that lateral acceleration of 3.1 m/s2 can be reached while moving along the snowy road with dry ruts at a speed higher in 27% (90 km/h). For improving the vehicle safety, it is recommended to have road signs on sharp turns/curves (R less than 120 m) to decrease the vehicle speed in 20 km/h.
Źródło:
Journal of KONES; 2011, 18, 4; 191-197
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The opportunities for establishing the critical speed of the vehicle on research in its lateral dynamics
Możliwości określenia prędkości krytycznej pojazdu na podstawie badań jego dynamiki poprzecznej
Autorzy:
Žuraulis, V.
Sokolovskij, E.
Matijošius, J.
Powiązania:
https://bibliotekanauki.pl/articles/300934.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
critical speed
lateral dynamics
vehicle sideslip
stability
circular motion
prędkość krytyczna
dynamika poprzeczna
poślizg pojazdu
stabilność
ruch obrotowy
Opis:
In this paper, the parameters important for lateral dynamics of vehicles are analyzed in order to establish the values of its critical speed on the moment of losing the stability. The values of the vehicle’s speed yaw rate, the steering wheel angle, the lateral acceleration, and the roll angle obtained from experimental tests are filtered according to the set conditions and only the general values that mean the beginning of the vehicle slipping are selected. For more precise assessment of the selected values, a statistical analysis is carried out. The Normal distribution law describes scattering of the selected values in the most relevant way and concretizes the critical speed being established. In the end of the paper, the obtained values of the speed are compared to the results of the theoretical calculations. Conclusions assessing the developed technique of selection of the parameters are provided.
Niniejsza praca analizuje parametry istotne dla dynamiki poprzecznej pojazdów w celu ustalenia wartości prędkości krytycznej w momencie utraty przez nie stabilności. Wartości szybkości zboczenia przez pojazd z kursu, kąta skrętu kierownicy, przyśpieszenia poprzecznego oraz kąta odchylenia się pojazdu, uzyskane w badaniach doświadczalnych, dobrano pod kątem założonych warunków i tylko ogólne wartości oznaczające początek poślizgu pojazdu zostały wybrane. W celu dokładniejszej oceny wybranych wartości przeprowadzono analizę statystyczną. Prawo rozkładu normalnego opisuje odpowiednie rozproszenie wybranych wartości i konkretyzuje ustaloną prędkość krytyczną. W końcowej części pracy porównano uzyskane wartości prędkości z wynikami obliczeń teoretycznych. Wnioski służą ocenie opracowanej techniki doboru parametrów.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 4; 312-318
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of mass parameters of the body on active safety of a fire engine in terms of the selection of chassis
Autorzy:
Nogowczyk, P.
Pałka, A.
Szczęśniak, G.
Powiązania:
https://bibliotekanauki.pl/articles/263479.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
special vehicles
centre of masses parameters
steering characteristics
dynamic lateral
stability
braking forces
pojazd specjalny
stateczność
siła hamowania
Opis:
The position of the centre of masses affects the distribution of wheel loads and, at the same time, the stability of the vehicle in drive on bends as well as the course (intensity and efficiency) of braking. For fire engines heading for the site of emergency, these are important properties regarding performance. The paper presents a simplified factor analysis of the influence of the centre of masses position in special vehicles with fire fighting bodywork on the characteristics of steering, lateral stability and braking forces. A relation between the transfer function and the driving speed has been presented and the influence of the distance between the centre of masses from the rear axle of the vehicle on its steerability has been analysed. With the examples of given vehicles, it has been shown to what extent the mentioned indices and parameters can be changed after equipping a standard truck chassis with our bodywork system. The information contained herein may be useful for the construction departments of specialized vehicle bodywork manufacturers.
Źródło:
Archiwum Motoryzacji; 2018, 82, 4; 87-98
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on stability and sensitivity of the rotating machines with overhung rotors to lateral vibrations
Autorzy:
Szolc, Tomasz
Konowrocki, Robert
Powiązania:
https://bibliotekanauki.pl/articles/2090690.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
overhung rotor-shaft
lateral vibrations
stability analysis
sensitivity analysis
system imperfection
wał wirnika
drgania boczne
analiza stabilności
analiza wrażliwości
niedoskonałość systemu
Opis:
The rotating machines with overhung rotors form a broad class of devices used in many types of industry. For this kind of rotor machine in the paper, there is investigated an inf luence of dynamic and static unbalance of a rotor, parallel and angular misalignments of shafts, and inner anisotropy of rigid couplings on system dynamic responses. The considerations are performed through a hybrid structural model of the machine rotor-shaft system, consisting of continuous beam finite elements and discrete oscillators. Numerical calculations are carried out for parameters characterizing a heavy blower applied in the mining industry. The main goal of the research is to assess the sensitivity of the imperfections mentioned above on excitation severity of rotor-shaft lateral vibrations and motion stability of the machine in question.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 6; e137987, 1--13
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies