Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "insulation" wg kryterium: Temat


Tytuł:
Proper selection of thermal insulation materials
Autorzy:
El-Shiekh, T. M.
Elsayed, A.A.
Powiązania:
https://bibliotekanauki.pl/articles/385057.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
thermal insulation
insulation material
economic selection
Opis:
Thermal insulation plays a key role in the overall energy management picture. It is interesting to consider that by using the insulation, the entire energy requirements of a system are reduced. Since, the main function of insulation is to reduce the heat transfer, the insulation material must have the appropriate characteristic to retard the transport of heat occurred by conduction, convection and radiation. The proper selection and application of various insulation materials are very important in the domain of heat transfer. This paper discusses how to select thermal insulation material and on what basis a decision is made for application, concerning material selection and costs, through brief discussion about major insulation materials, properties, steps for economic selection, applications, economics of insulation and thickness, location, case study and conclusion.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2009, 3, 2; 42-46
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Possibility of Using Sewage Sludge Pellets as Thermal Insulation
Autorzy:
Kosiński, Piotr
Kask, Bartosz
Franus, Małgorzata
Piłat-Rożek, Magdalena
Szulżyk-Cieplak, Joanna
Łagód, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/2201921.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pellets
thermal insulation
sewage sludge
thermal insulation materials
Opis:
The storage and disposal of sewage sludge from municipal wastewater treatment plants is becoming an increasing problem on a global scale. The attention of scientists is directed to the search for unique technologies to manage them. Firing sewage sludge in furnaces and producing lightweight aggregates and granules constitutes an innovative method of its disposal. The resulting granules could be a substitute for commonly used materials such as perlite, vermiculite, expanded clay, or LSA, and could be used as a secondary material in the construction industry, including road construction, as various types of ballast, and as an equivalent to aggregate in concretes. However, given that sewage sludge is increasingly used in biogas production, it does not completely decompose in the process and is still a problematic waste for many municipal treatment plants. Therefore, the use of sewage sludge pellets in construction, or any other industry, could revolutionize the market. The purpose of the conducted research was to evaluate the heat-insulating properties of granules produced from sewage sludge from the Municipal Wastewater Treatment Plant "Łyna" in Olsztyn used as a heat-insulating material.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 2; 161--172
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The study of sound and vibration isolating materials applicable environmental protection
Autorzy:
Sikora, J.
Targosz, J.
Powiązania:
https://bibliotekanauki.pl/articles/241841.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
materials
acoustic insulation
vibroisolation
Opis:
Prevention of composite material, characterized by a high acoustic insulation but satisfying spread of the dynamic interactions in the environment, the sound or vibration in materials requires new solutions task of isolation between the source of noise and vibration and the environment. These new solutions based on the idea of partition (of two or multilayer), the cores of granular materials, characterized by both good characteristics vibroisolation, sound absorption and vibration-damping materials. Using these solutions brings positive results in the reduction of acoustic energy, vibration isolation and acoustic damping material provided that they are the correct selection. The paper presents results of experimental investigations of acoustic insulation properties, parameters, physic - mechanical properties of selected structural elements made of materials belonging to the latest generation of noise and vibration safe guards applicable in the work environment and external environment. The paper presents the methodology and results of new materials used in Cathedrals: Vibroacoustics and Mechanics and Robotics and Mechatronics AGH, which should be standard in the selection of the parameters of vibroacoustic properties of the newly proposed structural engineering. The work was carried out in a research project 4875/B/TO2/2010/38 financed by Ministry of Science and Higher Education and projectII.B.12 (2011-2013) "New material solutions in the design of layered Barriers vibroacoustic protection of machinery and equipment", which is one of the objectives of the multiannual program "Improving the safety and working conditions," coordinated by CIOP - PIB in Warsaw.
Źródło:
Journal of KONES; 2012, 19, 4; 555-564
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analysis of the influence of microclimate on partial discharge activity in emissions of electric machines in the conditions of industrial operation – own research
Autorzy:
Plutecki, Z.
Szymaniec, S.
Powiązania:
https://bibliotekanauki.pl/articles/141042.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
HV electrical machines
partial discharge in winding insulation
on-line insulation diagnosis
microclimate
Opis:
The article presents the results of diagnostic measurements of partial discharge signal propagation from the winding insulation in electrical machinery, which were performed using an on-line method. This paper describes the results of experiments and the acquired experience in the monitoring of winding insulation in high power and high voltage electrical machines which are important in industrial production processes. The authors show the measurement techniques employed in their research. Representative measurement results are presented along with their analysis. The authors use an SKF monitoring systems to measure: vibrations, temperature, and humidity, as major factors affecting partial discharge activity in the from winding insulation of electrical machines.
Źródło:
Archives of Electrical Engineering; 2013, 62, 4; 629-648
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transparent insulation materials market in Europe
Autorzy:
Radziszewska-Zielina, Elżbieta
Kuraj, Filip
Powiązania:
https://bibliotekanauki.pl/articles/118592.pdf
Data publikacji:
2020
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
survey study
transparent insulation
market
Opis:
This paper presents the European market of transparent insulation materials as viewed by manufacturers. The objective of the study was to analyse the application of transparent insulation materials in the construction sector across Europe, determine the popularity of various technologies and materials used to manufacture them, the competition among transparent insulation manufacturers, investment in the development of new transparent insulation technologies, and trends in demand for transparent insulation in Europe. The analysis was performed on the basis of a survey of manufacturers. The use of transparent insulation is associated with high cost, yet the potential return on investment in the form of savings over the course of a building’s life-cycle convinces many potential developers to apply these materials. Based on the results of the survey, it can be concluded that European companies follow the increase in energy-efficiency and the transparent insulation market is prosperous, yet differs from country to country. It was observed that the positive perception of indirect heat gain transparent insulation systems was the most prevalent in Germany. The paper also explores the situation on the author’s domestic market – the Polish transparent thermal insulation market.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2020, 29, 3; 377-387
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The significance of marketing for the development of research and development institutions. Experiences of the the Research and Development Centre for Building Insulation Industry
Autorzy:
Śmiszek-Lindert, W.
Miros, A.
Powiązania:
https://bibliotekanauki.pl/articles/213917.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
marketing
research institutions
building insulation industry
Opis:
Experiences of the The Research and Development Centre for Building Insulation Industry in the development of research and development institutions is described in this article. Reasons for cooperation of R&D institutions and the business environment are explained. Promotional activity of the Research and Development Centre for Building Insulation Industry aie revealed and analysed.
Źródło:
Prace Instytutu Lotnictwa; 2012, 6 (227); 249-261
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Streaming electrification of insulating liquid mixtures
Autorzy:
Zdanowski, Maciej
Maleska, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/141677.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dielectric liquids
streaming electrification
transformer insulation
Opis:
Extensive efforts have been made for many years by the power generating industry to replace conventional solid and liquid insulation with synthetic materials. Those measures are aimed at increasing the load capacity, improved fire safety and extending transformer life during exploitation. Modern insulating materials include aramid fibre-based paper and insulating fluids made of synthetic and natural esters. The paper presents research results of the electrostatic charging tendency (ECT) of mixtures of fresh and aged mineral oil Trafo En with synthetic ester Midel 7131 and natural ester Midel 1204. The measurements were taken in a flow-through system using the pipes made of metal, cellulose and aramid paper. The influence of the liquid flow velocity, the type of material of the measuring pipe and the mixture content on the level of the streaming electrification current generation was determined.
Źródło:
Archives of Electrical Engineering; 2019, 68, 2; 387-397
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Diffusing Elements in a Reverberation Room on the Results of Airborne Sound Insulation Laboratory Measurements
Autorzy:
Mleczko, Dominik
Wszołek, Tadeusz
Powiązania:
https://bibliotekanauki.pl/articles/177423.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
reverberation room
airborne sound insulation
diffuseness
Opis:
The main problem in the measurement of airborne sound insulation is the measurement of the sound power radiated by the barrier, in practice performed by measuring the sound pressure level and the acoustic absorption in the receiving room. Large variations of the sound pressure level in a reverberation room indicate the presence of dominating strong standing waves, so that it becomes necessary to install diffusing elements. In ISO 10140, the limits have been defined in which the reverberation time at frequencies at and above 100 Hz should be included. Sometimes, however, in the case of rooms with a large volume, obtaining the required parameters is difficult and sometimes even impossible. It should then be checked whether the measured sound insulation depends on the reverberation time. The paper presents the results of sound insulation measurements at various reverberation time lengths in subsequent stages of diffusing elements installation in the receiving room. An analysis of diffusing materials amount and arrangement influence on the uniformity of the sound pressure level distribution and reverberation time in the room as well as the value of the measured sound insulation was carried out. Uncertainty of sound insulation measurement with partial uncertainties was adopted as a criterion supporting the assessment of the obtained results.
Źródło:
Archives of Acoustics; 2019, 44, 4; 739-746
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The energy parameters of formation of the porous structure
Autorzy:
Koshlak, H. V.
Pavlenko, A.
Piotrowski, J. Z.
Powiązania:
https://bibliotekanauki.pl/articles/402161.pdf
Data publikacji:
2016
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
thermal conductivity
porosity
swelling
heat insulation
Opis:
Research porosity thermal insulation of refractory materials is the important task of power engineering, because the thermal conductivity of porous materials depends on the shape and especially location of pore. Analytical review of existing technologies shows that research in this area is focused on the study of a process separately and generalized theories are not sufficient to clear analysis and model building process heat mass transfer of alumina porous material.
Źródło:
Structure and Environment; 2016, 8, 3; 206-210
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Materials Resistant to High Temperatures Obtained from Post-Production Fibrous Waste
Autorzy:
Kogut, K.
Kasprzyk, K.
Kłoś, R.
Powiązania:
https://bibliotekanauki.pl/articles/355061.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
waste
thermal insulation
ceramic
porosity
fibers
Opis:
This paper describes preparation methodology and research results of newly developed materials from post-production fibrous waste that are resistant to high temperatures. Widely available raw materials were used for this purpose. Such approach has significant impact on the technological feasibility and preparation costs. Obtained materials were verified via applying of various tests including characterization of shrinkage, porosity, density and water absorption as well as X-ray analysis (XRD), followed by mechanical bending and compressive strength determination. Based on the research results, the possible applications of materials as thermal insulators were indicated.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 2; 845-850
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Possibility of Limiting the Impact of Ground Vibrations Caused During Demolition of a Towers on Environment
Autorzy:
Targosz, J.
Bednarz, J.
Lisowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/177131.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ground vibrations
insulation layers
vibrations measurements
Opis:
Before disassemble and demolition of five granulation towers the authors planned and carried out measurements of the intensity of vibrations induced during the fall of the dismantled components of towers on the ground. The main aim of the study was to determine the maximum permissible weight of falling elements of the towers during the demolition, in terms of ensuring the protection of buildings and equipment located in the vicinity of the works. It was unacceptable to increase the vibration amplitudę displacement in each section of measurement on each of the three perpendicular axes by more than 2 µm peak-to-peak value and the absolute velocity of RMS of vibration amplitude couldn’t be increased by more than 1 mm/sec value than the background vibration during the demolition of the towers. Preliminary experimental studies were conducted on a test stand and the measurements were made on the real object. The amplitudes of vibration waves displacement and velocity were recorded on the measurement section in the direction of the protected building. The results of measurements were used to identify the propagation of the shock wave and the effectiveness of the proposed insulation layers.
Źródło:
Archives of Acoustics; 2016, 41, 4; 649-657
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System of Signal Injection and Extractioo for Protection and Insulation Monitoring in Medium Voltage Networks
Autorzy:
Kyrychenko, M.
Habrych, M.
Powiązania:
https://bibliotekanauki.pl/articles/410612.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
insulation
distribution network
ground fault
signal injection
Opis:
Simple overcurrent criterion is most often used for detection and elimination of ground faults in radial industrial medium voltage networks. Since in Poland medium voltage networks work with noneffectively grounded neutral point, the ground fault currents can reach very low values, especially under high resistance faults. Such faults cannot be detected by any protection. Therefore, new methods to detect ground faults and to control the insulation in medium voltage network are of great importance. In the paper the idea for monitoring insulation parameters of the system, based on the simultaneous use of two different signals of non-industrial frequency, injected into the controlled network, is presented and discussed.
Źródło:
Present Problems of Power System Control; 2017, 8; 23-30
2084-2201
Pojawia się w:
Present Problems of Power System Control
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal insulating cover for the metal body of a rocket motor
Osłona termoizolacyjna metalowego korpusu silnika rakietowego
Autorzy:
Borkowska, Małgorzata
Mężyński, Jan
Moskalewicz, Maciej
Rasztabiga, Tomasz
Tulik, Marek
Powiązania:
https://bibliotekanauki.pl/articles/1065044.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
thermal insulation
rocket motor
termoizolacja
silnik rakietowy
Opis:
Wieloletnie doświadczenie firmy BUMAR AMUNICJA S.A. w zakresie konstrukcji i technologii produkcji amunicji i rakiet, pozwoliło na podjęcie się zadania, wspólnie z Instytutem IMPiB Oddziału Elastomerów i Technologii Gumy w Piastowie, stworzenia zmodernizowanej osłony termoizolacyjnej do metalowego korpusu silnika rakietowego do wyrobu GROM-M. Warstwa izolacyjna metalowego korpusu silnika rakietowego charakteryzuje się tym, że miejscowe narażenia termiczne występujące w czasie spalania paliwa rakietowego, często wywołują miejscowe przepalenia korpusu silnika. W przypadku zastosowanego składu warstwy izolacyjnej zależnie od temperatury spalania w danym miejscu silnika wywołują odpowiedni dla tej temperatury przebieg procesu karbonizacji. Zapewniając tym samym wystarczającą w tym miejscu warstwę kompozytu fazy węgiel-węgiel zwiększającą wytrzymałość silnika oraz zabezpieczającą wspomniany metalowy korpus przed narażeniem termicznym w czasie spalania paliwa rakietowego. Warstwa termoizolacyjna silnika rakietowego jest powłoką dwuwarstwową składającą się z warstwy mieszanki kauczukowej i warstwy impregnowanej tkaniny węglowej. Dla uzyskania jednolitej struktury warstwy izolacji i jej odporności termicznej, w składzie mieszanki kauczukowej i w mieszance kauczukowej do impregnacji kompozytu na bazie tkaniny węglowej stosowane są podobne składniki: ten sam typ kauczuku, ta sama żywica fenolowo-formaldehydowa oraz te same substancje wulkanizacyjne.
Źródło:
Materiały Wysokoenergetyczne; 2019, 11, 1; 31-38
2083-0165
Pojawia się w:
Materiały Wysokoenergetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling and Experimental Verification of Ultrasound Transmission in Electro Insulation Oil
Autorzy:
Wotzka, D.
Cichoń, A.
Boczar, T.
Powiązania:
https://bibliotekanauki.pl/articles/177158.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasound transmission
numerical simulations
electro-insulation oil
Opis:
A verification study of ultrasound transmission numerical simulation results with experiment results is presented in this paper. The work considers a model of a transformer tank which is filled with electro insulating oil. In the experiment, performed under laboratory conditions, an ultrasound wave is generated by a piezoelectric transducer that is fixed in the centre of the tank and measured by another transducer mounted inside the tank at three distances: 10, 20 and 30 cm from the sound source. The transducer is able to measure and generate acoustic waves in the ultrasound frequency band up to 1 MHz. The simulation considers numerical calculation of acoustic pressure distribution inside the tank in which acoustic source emits waves with frequency equal to 100 kHz. Verification analysis has confirmed consistency of the numerically calculated values with the measurement results.
Źródło:
Archives of Acoustics; 2012, 37, 1; 19-22
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monitoring of Partial Discharges in Cable Insulation and Cable Head Using Acoustic Method
Autorzy:
Ranachowski, Zbigniew
Wieczorek, Krzysztof
Ranachowski, Przemysław
Dębowski, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2141672.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
partial discharges
medium voltage insulation
acoustic emission
Opis:
The article presents the application of Acoustic Emission (AE) method for detection and registration of partial discharges (PD) generated in medium voltage (MV) cable isolation and MV cable head. The insulation of the high voltage cable is made of a flexible material whose properties are characterised by a high coefficient of attenuation of the acoustic signals. For this reason, the AE method has not been used so far to detect PD in energetic cables. The subjects of the research were the MV cable and the standard T-type cable head. The cable contained defects which were the source of partial discharges. In case of cable head the PD were provoked by thin grounded electrode which was introduced into connector opening. The results of AE measurements are presented in the form of spectrograms. Acoustic Emission was evoked when the applied voltage level reached the value of 7.5 kV for the cable and 4 kV for the cable head. The authors used the acoustic instrumentation of their own design intended for future field use. Obtaining successful results of partial discharges measurements using the acoustic method in the cable insulation makes an original contribution of the presented work.
Źródło:
Archives of Acoustics; 2022, 47, 2; 259-265
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies