Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "experimental technique" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Preliminary experimental investigation into the use of recycled fibres from textile waste for the improvement of embankments
Autorzy:
Rossignoli, Chiara
Caruso, Marco
Jommi, Cristina
Sterpi, Donatella
Powiązania:
https://bibliotekanauki.pl/articles/28411636.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
circular economy
embankment
experimental technique
reinforced soil
textile waste
Opis:
Failures that occurred in the last few decades highlighted the need to raise awareness about the emergent risk related to the impact localised degradation phenomena have on embankments. Common interventions aimed to improve embankments, such as the reconstruction of the damaged area or the injection of low-pressure grouts to fill fractures and burrows, may cause the weakening of the structure due to discontinuities between natural and treated zones. Moreover, since such repair techniques require huge volumes of materials, more sustainable solutions are encouraged. At the same time, the textile and fashion industries are looking for sustainable waste management and disposal strategies to face environmental problems concerned with the voluminous textile waste dispatched to landfills or incinerators. The use of soil mixed with textile waste in embankment improvement has been investigated to identify an effective engineering practice and to provide a strategy for the circular economy of textiles. Preliminary laboratory tests have been conducted on soil specimens collected from the Secchia River embankment, Northern Italy, to define the appropriate mixture proportions and to compare physical properties and hydro-mechanical behaviour of natural and treated soils. The results show that an appropriate fibre content offers manageable and relatively homogeneous mixtures. The indluence on soil consistency is mainly due to the textile fibre hydrophilic nature. The addition of fibres reduces the maximum dry density and increases the optimum water content. At low stress levels, the compressibility and hydraulic conductivity appear higher, however macro voids produced during sample preparation may alter the findings.
Źródło:
Journal of Water and Land Development; 2023, 59; 202--207
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ballistic performance of FRP – steel layered structures
Autorzy:
Barnat, W.
Gotowicki, P.
Dybcio, P.
Gieleta, R.
Kosiuczenko, K.
Powiązania:
https://bibliotekanauki.pl/articles/245321.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ballistic performance
NATO 5.56
ballistic test
experimental technique
Dyneema
Opis:
In this study, the impact performance of layered structures made of aramid/epoxy, S2 glass/epoxy, Dyneema and steel subjected to high velocity impact is presented. All materials were previously examined using proper techniques of strength tests. The procedure allowed determining Young’s moduli, Poisson’s ratio, ultimate compression and tension strength, shear modulus. The ballistic test procedure was based on standards for testing panels and armour plates. For the purpose of ballistic tests, standard 5.56 NATO ammunition (183 g) was used. The aim of presented work was to determine ballistic performance of different structures under bullet impact. During the tests, subsequent time moments were recorded using Phantom V12 high-speed camera. When structure penetration did occur, the residual velocity of bullet was measured using PVM-21 lightscreen. Basing on the results, each material performance was evaluated. This paper reviewed a number of mechanisms that influence the ballistic performance of ballistic textiles. The composites reinforced with continuous fibres (aramid, S2 glass) could effectively absorb the kinematic energy of bullet. The efficiency of energy absorption for each types of material in the order from highest is as follows: polyethylene fibres Dyneema HB50, composite reinforced with S2 glass fibres, composite reinforced with aramid fibres.
Źródło:
Journal of KONES; 2013, 20, 2; 15-20
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of layers distribution in the composite coupon using finite element method and three point bending test
Autorzy:
Mazurkiewicz, Ł.
Małachowski, J.
Damaziak, K.
Baranowski, P.
Gotowicki, P.
Powiązania:
https://bibliotekanauki.pl/articles/387164.pdf
Data publikacji:
2013
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
fibre reinforced composite
FE analysis
hand lay-up technique
experimental validation
kompozyt włóknisty
analiza elementów skończonych
weryfikacja doświadczalna
Opis:
The main objective of the study is to develop experimentally validated FE model and perform numerical analysis of layered composites made by hand lay-up techniques during tension and bending test. The research object is glass - polyester laminate made of four unidirectional layers. In order to validate the numerical models experimental test were performed. Due to the very different stiffness modulus in tension and bending loading the material properties obtained from standard test are not suitable to apply in numerical model. Significantly different behaviour compared to experimental test was obtained for tree point bending where the numerical model becomes too stiff. Simple coupons, relatively easy to manufacture presented in the paper have very low quality. The differences in actual and theoretical bending stiffness (obtained from tension stiffness) exceed 70%. In order to represent the actual structure the layers of the composite were divided by resin layers and also additional resin layer at the top and bottom of the model were defined. Single stage optimization process was used to adjust the material layout. After layer set-up modification very significant improvement can be seen for flexural behaviour.
Źródło:
Acta Mechanica et Automatica; 2013, 7, 3; 160-165
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies