Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "experimental" wg kryterium: Temat


Tytuł:
Experimental crash tests involving passenger cars and the prototype concrete protective barrier
Autorzy:
Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:
https://bibliotekanauki.pl/articles/247037.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
experimental tests
test track
concrete protective barrier
crash test
experimental verification
Opis:
The work describes the experimental test methodology and results obtained during the experimental crash tests involving passenger cars and the prototype concrete protective barrier, which was built according to the original design prepared by the authors of this article. The crash tests involving a vehicle and the protective barrier cover the experiment results in three basic areas: severity ofthe collision impact on vehicle passengers, the impact on a vehicle and deformation of the road protective system. Applied testing procedures meet the requirements of the national standards, that make the equivalents of the European standards EN-1317-1:1998, EN-1317-2:1998, EN-J 317-3:2000. The tests have been performed for selected crash criteria (TB11 and TB32), for a normal restrain level (N2), using three passenger's cars (Dodge Neon and 2 units of Suzuki Swift). Applied testing procedures meet the requirements of the national standards [1-5]. The work presents examples of experimental test results in three basie areas: intensity of the crash impact on the vehicle passengers, the impact on a vehicle and deformation of the road protective system. The test results have been presented in a form of courses of speeds and accelerations along the vehicle body axes x, y, z. Acceleration severity index (ASI), theoretical head impact velocity (THIV), post-impact head delay (PHD), vehicle cabin deformation index (VCDI) and deformation levels of the road protective system (W) have been also defined.
Źródło:
Journal of KONES; 2010, 17, 2; 35-42
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rat skin as an experimental model in medicine
Autorzy:
Niczyporuk, M.
Powiązania:
https://bibliotekanauki.pl/articles/1918822.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Medyczny w Białymstoku
Tematy:
Rat
skin
experimental medicine
Opis:
Scientific experiments due to safety and ethical limitations regarding research human are often based on animal models. Rats are laboratory animals which are commonly used for these purposes. It should be remembered that morphologi- cal and functional differences between rat skin and human skin may refer to the correct interpretation of scientific results.
Źródło:
Progress in Health Sciences; 2018, 8(2); 223-228
2083-1617
Pojawia się w:
Progress in Health Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Study of the Effectiveness of a Combined Closure of the End Gate Pipeline Valve
Autorzy:
Herasymov, Henrikh H.
Gerasimov, Ievgenii G.
Ivanov, Sergiy Y.
Pinchuk, Oleg L.
Powiązania:
https://bibliotekanauki.pl/articles/241063.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
valve closure modes
experimental installation
valve control device
results of experimental studies
Opis:
One of the ways to ensure a reliable operation of irrigation systems is to protect them from water hammer (hydraulic shock) damage that occurs when starting or stopping a pumping station. This can be achieved by creating conditions in which a water hammer will not occur in the pressure pipeline as a result of closing the end gate valve (EGV). The aim of the present study was to investigate processes occurring in the pipeline during a linear closure of the EGV, during a closure with one break point and during an intermittent closure, as well as to verify the effectiveness of a combined end gate valve closure of the pipeline. Based on experimental data and calculations, the article recommends a linear closure of the EGV with one break point.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2019, 66, 1-2; 3-13
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of optimal planning methodologies for investigation of technological processes, devices and systems
Primenenie metodologii optimalnogo planirovanija dlja issledovanija tekhnologicheskikh processov, priborov i sistem
Autorzy:
Kirichenko, I.
Koshevoy, N.
Kostenko, E.
Rozhnova, V.
Powiązania:
https://bibliotekanauki.pl/articles/793489.pdf
Data publikacji:
2013
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
methodology
cost
mathematical model
experimental planning
hardware
software
experimental study
technological process
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2013, 13, 3
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The design of an inertial testbed for the tests of gearboxes
Autorzy:
Jaśkiewicz, M.
Lisiecki, J.
Lisiecki, S.
Slaski, G
Więckowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/360056.pdf
Data publikacji:
2014
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
gearboxes
experimental tests
designing testbeds
Opis:
The paper presents the technical assumptions and the design of a testbed suitable for conducting experimental tests of gearboxes. In the case of drivetrain assemblies, most often they are built on testbeds, much more seldom in vehicles. Experimental tests constitute a broad field due to the differentiation of functions of individual assemblies and their components in the drivetrain system of cars and machines. Conducting simulation tests (on simulation testbeds) consists in the possibly faithful recreation of real operating conditions of an assembly in a vehicle. The testbeds for such tests are complex and expensive but the obtained results are more reliable and more precisely, than in the case of other methods, take into consideration the impact of different operating loads on the durability of the research object. Due to the extent of the topic, this study is only the introduction to the design work whose aim is to prepare the design of a testbed.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2014, 39 (111); 67-73
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Piecing Together J. G. Ballard’s "The Atrocity Exhibition"
Autorzy:
Tereszewski, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/1366476.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
Ballard
Debord
spectacle
experimental literature
Opis:
J.G. Ballard’s The Atrocity Exhibition can easily be classified as his most experimental novel, one that, more than any other of his works, succeeds in presenting, or perhaps representing, the fragmented condition of a media-saturated Western culture. On the surface, it does appear to be a postmodern and seemingly chaotic bricolage of pop iconography, landscapes, and medical references arranged non-linearly and without plot, and yet there is a unifying principle at work, anchoring the texts in a specific ideological context of 1960s Western culture. The main argument of this paper expands on Debord’s study of spectacle and regards The Atrocity Exhibition as a work that not only attempts to frustrate reading expectations, but also addresses the cultural shift towards spectacular society.
Źródło:
Lublin Studies in Modern Languages and Literature; 2020, 44, 2; 75-82
0137-4699
Pojawia się w:
Lublin Studies in Modern Languages and Literature
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The concept of intuition in experimental philosophy
Autorzy:
Sękowski, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2188294.pdf
Data publikacji:
2022-10-24
Wydawca:
Uniwersytet Pedagogiczny im. Komisji Edukacji Narodowej w Krakowie. Instytut Filozofii i Socjologii
Tematy:
experimental philosophy
intuition
methodology
pragmatics
Opis:
Although the concept of intuition has a central place in experimental philosophy, it is still far from being clear. Moreover, critics of that movement often argue that the concept of intuition in experimental philosophy does not correspond to the concept of intuition used in traditional, armchair philosophy. However, such a claim is problematic, because most attempts to define this concept are made with regard to the armchair philosophy’s point of view and not that of experimental philosophy. In the article I analyse the concept of intuition in experimental philosophy by taking into account its theoretical assumptions, and the research practice of its representatives. By analysing the most influential experimental philosophers’ views, I formulate its core characteristics. According to them, intuition is a mental state that is a reaction to the described case, which is revealed in the readiness to express a judgment about this case. Then, I investigate step by step the frequently postulated methodological, phenomenological, and etiological conditions that could narrow down the initial definition. I show that the only condition coherent with experimental philosophy’s assumptions and its practice is an etiological one, as the mental state that could be classified as intuition has to be shaped by pragmatic, and not only semantic factors. In the last parts of the text, I draw out some of the consequences of the position that I have presented, regarding the methodology of experimental philosophy and philosophy in general.
Źródło:
ARGUMENT: Biannual Philosophical Journal; 2022, 12, 1; 111-128
2083-6635
2084-1043
Pojawia się w:
ARGUMENT: Biannual Philosophical Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental studies of low-frequency acoustic fields in a shallow sea
Autorzy:
Luchinin, A. G.
Powiązania:
https://bibliotekanauki.pl/articles/332794.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
experimental studies
acoustic fields
shallow sea
Opis:
The results of the studies of excitation and propagation of low-frequency acoustic fields in a shallow sea, which have been carried out at the IAP RAS for several years, are discussed. A novel equipment complex designed specially for these experiments and intended for the selective excitation and reception of waveguide modes is described. Examples of measurements of various characteristics of low-order mode acoustic signals are given, which demonstrate high efficiency of the applied equipment and measurement technique.
Źródło:
Hydroacoustics; 2009, 12; 117-126
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and numerical (FSM) investigations of thin-walled beams with double-box flanges
Badania doświadczalne i numeryczne (FSM) belek cienkościennych z półkami skrzynkowymi
Autorzy:
Paczos, P.
Powiązania:
https://bibliotekanauki.pl/articles/281963.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
thin walled beams
FSM
experimental investigations
Opis:
In the paper, experimental and numerical investigations of thin-walled beams with doublebox flanges were presented. They were a continuation of researches conducted at the Unit of Strength of Materials and Structures at Poznan University of Technology. Numerical results obtained with the Finite Strip Method (FSM) were compared with experimental ones and used for validation of analytical solutions.
W pracy przedstawiono badania doświadczalne i numeryczne belek cienkościennych z półkami skrzynkowymi. Zagadnienie to jest kontynuacją badań przeprowadzonych w Zakładzie Wytrzymałości Materiałów i Konstrukcji Politechniki Poznańskiej. Wyniki numeryczne otrzymane z wykorzystaniem metody pasm skończonych porównano z wynikami uzyskanymi z eksperymentu, a następnie użyto do weryfikacji rozwiązań analitycznych.
Źródło:
Journal of Theoretical and Applied Mechanics; 2013, 51, 2; 497-504
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction forces on the lubricated surfaces in micro and nano scale
Autorzy:
Wierzcholski, K.
Miszczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/241987.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
AFM
experimental data
dynamic friction forces
Opis:
The present paper determines static and dynamic friction forces and friction coefficients using atomic force microscope during the hydrodynamic viscoelastic liquid flow in the thin boundary layer around the cells of two cooperating bodies. Atomic force microscope is necessary in performed experimental investigations and measurements of friction forces. Therefore, proper parameters of microscope are described and illustrated in specific enlargement. The use of microscope of atomic forces AFM for complex technical investigations to a large extent has facilitated carrying-out the measurements of tissue surface features and control of its growing process in human joint and deforming process in micro-bearing alloy. During conventional nano-scale measurements of surface topography, the AFM microscope makes it possible to simultaneously map local lateral forces and oscillatory phases of translations, which may be interpreted as a representation of local friction forces and local adhesive forces as well as values of elasticity modules. One of the important advantages of the AFM microscope application in the area of investigations with the use of bio-reactors is the possibility of carrying out measurements directly in liquid, namely that surrounds the cells or micro-bearing gaps
Źródło:
Journal of KONES; 2008, 15, 4; 597-602
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A framework for the reliability characteristics estimation on the experimental data
Autorzy:
Borowczyk, H.
Lindstedt, P.
Manerowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/242525.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
reliability
experimental data
framework
expert system
Opis:
This paper presents a framework for the reliability characteristics estimation on the experimental data. The framework consists of the set of failures, the experimental data sources, the set of reliability characteristics, the estimation methods, the estimation goodness tests and the expert system supporting estimation and statistical inference processes. The experimental data was obtained with two main theoretical means: control theory and diagnostics. It has been observed that changes of the functioning condition potential could serve to determine the symptoms of transient (momentary) failures and the changes in the potential of the technical condition to determine the symptoms of parametric faults. Such an information is sufficient to calculate reliability characteristics before dangerous catastrophic failures occur and to calculate reliability characteristics for single object without having to deal with a numerous set of objects. The set of reliability characteristics models consists of the analysed failures combination and distribution functions used in the reliability engineering. The set of estimation methods includes analytical and numerical ones. The proposed expert system supporting estimation and statistical inference processes consists of data base (the experimental data), rule base and inferring machine.
Źródło:
Journal of KONES; 2016, 23, 3; 57-63
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of a conical sleeve with pivot joint loading of axial force
Autorzy:
Andrzejuk, A.
Skup, Z.
Zalewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/949325.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
conical joint
hysteresis loop
experimental testing
Opis:
The paper presents theoretical and experimental studies of energy dissipation in a model of a conical sleeve-pivot joint. Energy dissipation between cooperating surfaces of a friction pair including structural friction, elastic and frictional effects between its elements and Lame’s problem are taken into account. A comparative analysis was conducted to compare the theoretical results obtained from numerical simulations and direct experimental data acquired from the MTS testing machine. The analysis of the influence of geometrical and material parameters, external loading on the dissipation of energy is presented too. This paper shows an outline of theoretical considerations, the method for conducting tests as well as selected comparative results.
Źródło:
Journal of Theoretical and Applied Mechanics; 2014, 52, 2; 345-358
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research into flows in turbine blade seals. Part I: research methods
Autorzy:
Badur, J.
Kosowski, K.
Stępień, R.
Piwowarski, M.
Powiązania:
https://bibliotekanauki.pl/articles/1955758.pdf
Data publikacji:
2003
Wydawca:
Politechnika Gdańska
Tematy:
turbine seals
CFD calculations
experimental investigations
Opis:
Flows in the shroud clearance affect leakage losses and, thus, the turbine stage efficiency. However, at the same time, the distribution of pressure in the seal gaps plays an important role in the generation of the so-called "pressure forces", which may cause self-excited rotor vibrations of the aerodynamic type. Our investigations were carried out in order to show how a CFD code can cope with determining the pressure field in a rotor-blade shroud clearance. Experimental investigations of the pressure field in the shroud clearance were performed on a one-stage air model turbine of the impulse type. Measurements of pressure distribution were carried out for various rotor speeds and turbine loads. 3D calculations of flows in the model turbine were performed using the FLUENT CFD code. The calculations were carried out for the same variants which had been measured experimentally. In this part of the paper, the experimental stand and the numerical methods are described, while a detailed numerical analysis and a comparison between the experimental and the calculated results are presented in parts II and III, respectively.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2003, 7, 3; 309-317
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy intensity of the electric vehicle
Autorzy:
Dziubiński, M.
Drozd, A.
Adamiec, M.
Siemionek, E.
Powiązania:
https://bibliotekanauki.pl/articles/102305.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
energy intensity
electric vehicle
experimental research
Opis:
Continuous energy intensity is a relationship between continuous energy intensity and energy intensity of movement. In the paper we proposed to analyze energy intensity of the movement, as the size specifying the power demand to the wheel drive and presented the balance of power of an electric car moving in the urban cycle. The object of the test was a hybrid vehicle with an internal combustion engine and electric motor. The measurements were carried out for 4 speeds and 2 driving profiles.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 4; 27-34
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Statistical validation of the method for measuring radius variations of components on the machine tool
Autorzy:
Adamczak, S.
Janusiewicz, A.
Makieła, W.
Stępień, K.
Powiązania:
https://bibliotekanauki.pl/articles/221018.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
roundness
experimental method error
process tool
Opis:
This paper deals with the experimental validation of the suitability of the method for measuring radial variations of components on the process tool. The tests were conducted using a computerized PSA6, which was compared to a Talyrond 73. The results of measurement of roundness deviations as well as roundness profiles were analyzed for a sample of 70 shafts. The roundness deviations were assessed by determining the experimental errors, while the profiles obtained with the tested device were compared to those registered by the reference device using three correlation coefficients.
Źródło:
Metrology and Measurement Systems; 2011, 18, 1; 35-46
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies