Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "energy standard" wg kryterium: Temat


Tytuł:
Reasons for the growing popularity of energy efficient buildings in Poland
Autorzy:
Pieczara, J.
Powiązania:
https://bibliotekanauki.pl/articles/101277.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
energy efficiency
buildings
energy performance
climate change
energy standard
Directive 2010/31
European standard
Opis:
Recently the so called “green”, ecological or sustainable architecture is becoming more and more popular. Energy efficiency of buildings is one of the aspects of this kind of architecture. In our country, the main reason for the growing popularity of the energy efficient buildings is the new buildings’ legislation. The new buildings’ regulations set up much higher standards for energy performance of buildings than the previous ones. Poland, like all other EU member states, was forced to introduce new energy standards for buildings, by the implementation of the Directive 2010/31/EU. The prospective standards for all new buildings in Poland are on the level of today’s low energy buildings. The purpose of introducing such high standards is to reduce the amount of energy used by the building industry in Europe. According to EEA report one of the results of climate change in our region would be longer and more severe heat periods, and some adaptation action should be taken. Probably, according to the new legislation, too little emphasis was put on the overheating risk of the buildings. At present, in Poland, other reasons for constructing energy efficient buildings are of minor meaning. Especially the financial encouragements for small investors are not effective enough. The situation looks better in the area of public buildings. Institutional investors have more possibilities for obtaining financial support, which is encouraging enough. Also, the obligation to inform the public about the results of the energy performance certificate is not respected fully. This obligation could help to increase the environmental conscience of investors. So there is still much room for improvement.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2016, IV/1; 1195-1207
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected aspects of designing and realization of low energy single-family houses according to the NF15 AND NF40 standards
Autorzy:
Deja, B. M.
Tyburski, J.
Powiązania:
https://bibliotekanauki.pl/articles/297917.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
design
realization
single-family house
NF40
NF15
energy standard
low energy building
passive building
Opis:
The article presents chosen aspects of designing and realization of low energy single-family houses fulfilling the requirements of the NF40 and NF15 standards as determined in the priority program of the National Fund for Environmental Protection and Water Management entitled „An improvement of energy effectiveness. Subsidies to low energy houses”. An analysis concerns the minimal technical requirements pertaining to the outside shape and internal structure of NF40 and NF15 buildings, in comparison with the building law recommendation on technical conditions to meet by buildings and their location. An attention was paid to chosen problems of fulfilling the requirements of the NF40 and NF15 standards and the need of applying modern structural and material solutions and to especially accurate realization.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2015, 18(2); 103-114
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The modifications to the requirements on energy savings and thermal insulation of buildings in Poland in the years 1974-2021
Autorzy:
Życzyńska, A.
Cholewa, T.
Powiązania:
https://bibliotekanauki.pl/articles/390627.pdf
Data publikacji:
2015
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
heat transfer coefficient
energy policy
insulation thickness
usable energy
non-renewable primary energy demand index
building energy standard
energy saving
Opis:
Residential and public buildings use for heating more than 40% of the total energy consumption in the European Union. Therefore, this paper discusses the modifications to the building energy standard, which is currently in force. It is based on the requirements included in the Polish technical building regulations and standards. The proper energy-saving police have been implemented to this kind of consumers to diminish the energy consumption. The analysis pertains to the values of heat transfer coefficients of building partitions as well as the indexes of the energy demand for various types of buildings. The analysis was conducted between 1974 and 2013. Moreover; the changes within this range, which will come into force in 2014 and will continue to 2021, which act in accordance with the technical requirements suitable for buildings, were also discussed. Furthermore, minimal thicknesses of insulation materials which enable meeting this requirements of a heat transfer coefficient for building partitions, were examined in the article.
Źródło:
Budownictwo i Architektura; 2015, 14, 1; 145-154
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of applied heat sources on the value of energy performance of building in view of the new regulations on energy efficiency
Wpływ zastosowanego źródła ciepła na charakterystykę energetyczną budynku mieszkalnego w świetle nowych regulacji dotyczących efektywności energetycznej
Autorzy:
Szul, T.
Powiązania:
https://bibliotekanauki.pl/articles/335368.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
energy consumption in buildings
comparison of energy performance EP
energy standard of residential buildings
zużycie energii w budynkach
standard energetyczny budynków
wskaźnik jednostkowego zapotrzebowania na energię pierwotną EP
Opis:
It was calculated energy performance of residential building which meets the requirements for heat-transfer rate for the building envelope, then the result was compared with the values of the maximum primary energy demand for heating, ventilation and usable water heating, for predicted time schedule (years: 2014, 2017, 2021) presented in a draft regulation on technical conditions obligatory for buildings and their location. Calculations were made for three variants of heating, i.e.: gas, coal and biomass. In addition, the calculations considered a variant in which hot water is prepared using a solar panel installation. Meeting performance requirements for buildings after the year 2014, and also after 2017 will be possible if a gas boiler and a biomass boiler are used, independently of solar panel set applied to prepare u.h.w. In case of coal heating, meeting the regulation on PE will be possible if hot water is prepared also by solar panel set. The maximum values of unit coefficient of demand for non-renewable PE after 2021 will cause that building equipped in a coal-fired boiler will not meet the requirements, even if the solar panel set is used for hot water preparation. In the case of heating using gas boiler, meeting regulations will be possible only when hot water will be prepared with a solar panel set.
Obliczono charakterystykę energetyczną dla przykładowego budynku mieszkalnego jednorodnego, który będzie spełniał planowane wymagania dotyczące ochrony cieplej przegród zewnętrznych (Umax), a następnie porównano ją z maksymalnymi wartościami wskaźnika zapotrzebowania na energię pierwotną EPH+W na potrzeby ogrzewania, wentylacji i przygotowania ciepłej wody użytkowej, zgodnie z harmonogramem czasowym (rok: 2014, 2017, 2021) przedstawionym w projekcie rozporządzenia dotyczącego warunków technicznych, jakim powinny odpowiadać budynki i ich usytuowanie. Obliczenia wykonano dla trzech wariantów ogrzewania tj. gazowego, węglowego oraz na biomasę. Dodatkowo w obliczeniach uwzględniono wariant, w którym ciepła woda użytkowa jest przygotowywana za pomocą instalacji solarnej. Spełnienie wymagań stawianych budynkom w po roku 2014, a także po 2017 będzie możliwe w przypadku zastosowania kotła gazowego, oraz na biomasę niezależnie od tego czy będzie zastosowany zestaw solarny do przygotowania c.w.u. W przypadku zastosowania ogrzewania węglowego, spełnienie przepisów dotyczących EP H+W(max) będzie możliwe pod warunkiem, że ciepła woda użytkowa będzie przygotowywana dodatkowo przez zestaw solarny. Wartości graniczne jednostkowego współczynnika zapotrzebowania na nieodnawialną energię pierwotną EP H+W(max) po roku 2021 spowodują, że budynek wyposażony w węglowe źródło ciepła nie spełni wymagań, nawet w przypadku zastosowania zestawu solarnego do przygotowania ciepłej wody użytkowej. W przypadku ogrzewania wykorzystującego kocioł gazowy, wypełnienie warunku zapisanego w rozporządzeniu będzie możliwe jedynie wtedy, gdy ciepła woda użytkowa będzie przygotowywana za pomocą zestawu solarnego.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2013, 58, 2; 163-168
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Standard deviation in the simulation of statistical measurements
Autorzy:
Przystupa, Krzysztof
Kolodiy, Zenoviy
Yatsyshyn, Svyatoslav
Majewski, Jacek
Khoma, Yuriy
Petrovska, Iryna
Lasarenko, Serhiy
Hut, Taras
Powiązania:
https://bibliotekanauki.pl/articles/2203365.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
standard deviation
measurement
relaxation time
energy spectrum
Opis:
Is this article simulation of statistical measurements is performed on the basis of which the analysis of the standard deviation of the obtained results is carried out. It is shown that the standard deviation is minimum and independent from measurement duration while an object is in the state of equilibrium. For objects in a stationary non-equilibrium state the standard deviation depends on the duration measurements and the parameters of the state. The influence of these factors on the standard deviation is assessed with equation which includes the relaxation time. The value of the relaxation time is determined by approximating the energy spectrum of the studied signals. The analysis of energy spectra showed that the spectrum of white noise is inherent in objects in equilibrium; the flicker component of the spectrum occurs when the state of the object deviates from equilibrium.
Źródło:
Metrology and Measurement Systems; 2023, 30, 1; 17--30
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Average Energy Slope Estimation Formulas for One-dimensional Steady Gradually Varied Flow
Autorzy:
Artichowicz, W.
Mikos-Studnicka, P.
Powiązania:
https://bibliotekanauki.pl/articles/241083.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channel
steady flow
gradually varied flow
standard step method
energy slope
Opis:
To find the steady flow water surface profile, it is possible to use Bernoulli’s equation, which is a discrete form of the differential energy equation. Such an approach requires the average energy slope between cross-sections to be estimated. In the literature, many methods are proposed for estimating the average energy slope in this case, such as the arithmetic mean, resulting in the standard step method, the harmonic mean and the geometric mean. Also hydraulic averaging by means of conveyance is commonly used. In this study, water surface profiles numerically computed using different formulas for expressing the average slope were compared with exact analytical solutions of the differential energy equation. Maximum relative and mean square errors between numerical and analytical solutions were used as measures of the quality of numerical models. Experiments showed that all methods gave solutions useful for practical engineering purposes. For every method, the numerical solution was very close to the analytical one. However, from the numerical viewpoint, the differences between the methods were significant, as the errors differed up to two orders of magnitude.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2014, 61, 3-4; 89--109
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studying OpenMP thread mapping for parallel linear algebra kernels on multicore system
Autorzy:
Bylina, B.
Bylina, J.
Powiązania:
https://bibliotekanauki.pl/articles/200778.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
computation performance
OpenMP standard
nonnegative matrix factorization
thread mapping
energy consumption
wydajność obliczeniowa
Standard OpenMP
nieujemna faktoryzacja macierzy
mapowanie
zużycie energii
Opis:
Thread mapping is one of the techniques which allow for efficient exploiting of the potential of modern multicore architectures. The aim of this paper is to study the impact of thread mapping on the computing performance, the scalability, and the energy consumption for parallel dense linear algebra kernels on hierarchical shared memory multicore systems. We consider the basic application, namely a matrix-matrix product (GEMM), and two parallel matrix decompositions (LU and WZ). Both factorizations exploit parallel BLAS (basic linear algebra subprograms) operations, among others GEMM. We compare differences between various thread mapping strategies for these applications. Our results show that the choice of thread mapping has the measurable impact on the performance, the scalability, and energy consumption of the GEMM and two matrix factorizations.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 6; 981-990
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modernization of DVB-S2 Standard Using Signal-Code Constructions Based on Amplitude Modulation of Many Components
Autorzy:
Horbatyi, Ivan
Yashchyshyn, Yevhen
Powiązania:
https://bibliotekanauki.pl/articles/227156.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
DVB-S2 standard
frequency efficiency
energy efficiency
amplitude modulation of many components
Opis:
It is proposed to modernize the DVB-S2 standard by using AMMC (amplitude modulation of many components) signals instead of 8PSK (8-phase shift keying) and APSK (amplitude-phase shift keying) signals, and to modernize the DVB-S2 standard equipment by using the AMMC modulator and AMMC demodulator. Usage of AMMC makes it possible to reduce the symbol error rate in communication channel up to 52 times. The satellite digital video broadcast systems that apply signal-code constructions based on AMMC are characterized by a higher energy efficiency from 1 to 2.6 dB compared with signal-code constructions based on 8PSK and APSK.
Źródło:
International Journal of Electronics and Telecommunications; 2020, 66, 2; 315-320
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods for asssessing energy efficiency of grain dryers
Metoda oceny efektywności energetycznej suszarek do ziarna
Autorzy:
Nowak, Janusz
Przystupa, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/93426.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
grain dryer
energy index
standard conditions
suszarka do ziarna
wskaźniki energetyczne
warunki standardowe
Opis:
The article presents an algorithm for calculating selected energy assessment indexes for grain driers. Particular attention was paid to the conversion of the equations obtained for the operating conditions of the drying process into equations allowing the calculation of indexes for the standard drying conditions. The indexes obtained allow a proper comparison of dryers operating in varied atmospheric conditions, as well as humidity and temperature of the dried material.
W artykule przedstawiono algorytm obliczania wybranych wskaźników oceny energetycznej suszarek do ziarna. Szczególną uwagę zwrócono na przekształcenie równań otrzymanych dla warunków eksploatacyjnych suszenia do równań pozwalających na obliczenia wskaźników dla warunkach standardowych suszenia. Otrzymane wskaźniki pozwalają na właściwe porównywania suszarek pracujących w różnych warunkach otoczenia oraz różnej wilgotności i temperatury suszonego materiału.
Źródło:
Agricultural Engineering; 2019, 23, 2; 39-47
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simple method to improve the TCXDVN 306:2004 indoor climate standard for closed office workplaces in Vietnam
Autorzy:
Ha, Pham T. H.
Hoa, Nguyen T.
Binh, Pham T.
Powiązania:
https://bibliotekanauki.pl/articles/35521811.pdf
Data publikacji:
2021
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
thermal comfort
artificial indoor environment
standard indoor climatic parameters
office workplace
energy efficient building
Vietnam
Opis:
Thermal comfort is an important parameter of indoor climate, which affects office worker health and productivity, and also aids planning for energy efficient building design and operation. To provide satisfactory thermal comfort in office workplaces under hot and humid outdoor conditions, most contemporary office buildings in Vietnam are fitted with ducted air-conditioning systems. The current Vietnamese standard TCXDVN 306:2004 for indoor climate was derived from thermal comfort research conducted between the 1960s and 1980s. This standard is limited by various drawbacks, including no distinction between natural or artificial environments. In response, this 2018 research provides physical measurements and opinion surveys of current indoor climatic conditions in representative office workplaces in three regions of Vietnam: North, Central and South. The measurement results have been transformed into ET, PMV and PPD indicators, which value demonstrate the shortcomings of the TCXDVN 306:2004 standard, while providing a baseline input for updating this standard to meet the thermal comfort needs of air-conditioned office workplaces, based on the concept of probability comfort, which are integral with the ISO and the ASHRAE standard.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2021, 30, 1; 117-133
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Standard specific drilling energy of the acoustic signal for identification of Indentor-Rock System
Standardowa rozporządzalna energia wiercenia sygnału akustycznego dla identyfikacji za pomocą Systemu Identor-Rock
Autorzy:
Futo, J.
Lazarova, E.
Krulakova, M.
Baranova, V.
Powiązania:
https://bibliotekanauki.pl/articles/318133.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
procesy drążenia skały
sygnał akustyczny
energia rozporządzalna
zdolność do pracy narzędzia tnącego
rozporządzalna energia drążąca sygnału akustycznego
rock drilling process
acoustic signal
specific energy
working ability of cutting tool
standard specific drilling energy of the acoustic signal
Opis:
Current computer techniques provide new modern utilization and approaches in processes that have not been used. One of such possibilities is a design of models for optimization of rock excavation process. The qualities of the model derived from conventional energy theory of rock drilling are compared to the qualities of non-standard model obtained by scanning of the acoustic signal as an accompanying effect of environment in the rock drilling process. The paper focuses on the signal energy, as one of type energy transformed by rock drilling process. The acoustic signal was registered on the laboratory drilling stand at the Institute of Geotechnics SAS in Košice.
Obecne możliwości technologiczne zapewniają nowe, nowoczesne sposoby wykorzystania i opracowywania nieużytych jeszcze procesów. Jedną z takich możliwości jest projekt modelu do optymalizacji procesu drążenia skały. Wartości modelu powstałego z konwencjonalnych teorii na temat energii w drążeniu skały zostały porównane z niestandardowym modelem wykorzystującym skan sygnału akustycznego odnoszącego podobny efekt w procesie drążenia skały. Sygnał akustyczny został zarejestrowany w laboratoryjnym stojaku do wiercenia w Instytucie Geotechniki SAS w Koszycach.
Źródło:
Inżynieria Mineralna; 2015, R. 16, nr 1, 1; 151-156
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reducing the Use of Electrochemical Sources of Electricity Through the Use of Wireless Power Supply
Ograniczenie wykorzystania elektrochemicznych źródeł energii elektrycznej poprzez zastosowanie zasilania bezprzewodowego
Autorzy:
Jajczyk, Jarosław
Filipiak, Michał
Dąbrowski, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/1811557.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
electrochemical energy storage
recycling of batteries
recycling of accumulators
wireless power supply
Qi Wireless Charging standard
elektrochemiczny zasobnik energii
recykling baterii
recykling akumulatorów
zasilanie bezprzewodowe
standard Qi Wireless Charging
Opis:
The paper discusses issues related to the recycling of electrochemical sources of electricity such as portable batteries and accumulators. Based on the reports of the Chief Inspectorate of Environmental Protection, the collection rate of waste batteries and accumulators in Poland for the years 2010-2018 was subjected to analysis. Despite the increasing year-to-year percentage value of the collection rate, it has been demonstrated that a significant mass of batteries and accumulators is still not recycled. This article presents a method of reducing the amount of waste electrochemical energy storages, through the use of inductive power supplies. The idea of the operation of such circuits has been discussed and the Qi Wireless Charging standard, applicable since 2011, has been characterised. As an example of a device with wireless power supply, a computer indicator system has been provided. Tests have been carried out and the correctness of operation of this solution has been verified. It has been demonstrated that in some cases it is possible to resign from power supplies based on batteries or accumulators, and use wireless power supplies instead, without degrading the functional properties of devices. Solutions of this type may contribute to the protection of the natural environment.
W pracy omówiono problematykę recyklingu elektrochemicznych źródeł energii elektrycznej takich jak baterie i akumulatory przenośnie. Na podstawie raportów Głównego Inspektoratu Ochrony Środowiska przeanalizowano zbieralność zużytych baterii i akumulatorów w Polsce w latach 2010-2018. Pomimo rosnącego z roku na rok procentowego wskaźnika zbieralności wykazano, że znaczna masa baterii i akumulatorów wciąż nie jest poddawana recyklingowi. W artykule przedstawiono metodę ograniczenia ilości zużywanych elektrochemicznych zasobników energii elektrycznej poprzez zastosowanie zasilania indukcyjnego. Omówiono ideę działania tego typu układów oraz scharakteryzowano obowiązujący od 2011 roku standard Qi Wireless Charging. Jako przykład urządzenia zasilanego bezprzewodowo podano układ wskaźnika komputerowego. Wykonano badania i zweryfikowano poprawność działania tego rozwiązania. Wykazano, że w niektórych przypadkach możliwe jest zrezygnowanie z zasilania bateryjnego lub akumulatorowego na rzecz zasilania bezprzewodowego bez pogorszenia własności funkcjonalnych urządzeń. Rozwiązania tego typu mogą przysłużyć się ochronie środowiska.
Źródło:
Rocznik Ochrona Środowiska; 2020, Tom 22, cz. 1; 444-455
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Energy Slope Averaging Methods on Numerical Solution of 1D Steady Gradually Varied Flow
Autorzy:
Artichowicz, W.
Prybytak, D.
Powiązania:
https://bibliotekanauki.pl/articles/240952.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
standard step method
numerical integration
initial-value problem
ordinary differential equation
open channel
steady gradually varied flow
energy slope
Opis:
In this paper, energy slope averaging in the one-dimensional steady gradually varied flow model is considered. For this purpose, different methods of averaging the energy slope between cross-sections are used. The most popular are arithmetic, geometric, harmonic and hydraulic means. However, from the formal viewpoint, the application of different averaging formulas results in different numerical integration formulas. This study examines the basic properties of numerical methods resulting from different types of averaging.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2015, 62, 3-4; 101-119
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of process conditions on quality and energy consumpion during extrusion-cooking of carp feed
Wplyw warunkow procesu na jakosc i energochlonnosc ekstrudowanej karmy dla karpia
Autorzy:
Oniszczuk, T.
Moscicki, L.
Wojtowicz, A.
Mitrus, M.
Rejak, A.
Zawislak, K.
Sobczak, P.
Mazur, J.
Oniszczuk, A.
Powiązania:
https://bibliotekanauki.pl/articles/793431.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
extrusion-cooking
specific mechanical energy
water stability
single screw extrusion-cooker
carp
feed
freshwater fish
standard mixture
raw material
moisture content
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the validity of investing in energy-efficient single-family construction in Poland - case study
Ocena zasadności inwestowania w energooszczędne budownictwo jednorodzinne w Polsce - analiza przypadku
Autorzy:
Tomczak, K.
Kinash, O.
Powiązania:
https://bibliotekanauki.pl/articles/231210.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
budownictwo energooszczędne
standard NF40
analiza ekonomiczna
analiza wielokryterialna
metoda AHP
szkielet lekki
budownictwo drewniane
energy-efficient construction
NF40 standard
economic analysis
multi-criteria analysis
analytic hierarchy process (AHP)
light frame
wooden construction
Opis:
The article raised issues related to the design and execution of low-energy objects in Polish conditions. Based on the designed single-family house, adapted to the requirements of the National Fund for Environmental Protection and Water Management ("NF40" standard), the tools to assist investment decisions by investors were shown. An economic analysis and a multi-criteria analysis were performed using AHP method which had provided an answer to the question whether it is worthwhile to bear higher investment costs in order to adjust to the standards of energy-efficient buildings that fulfil a minimal energy consumption's requirements contained in Polish law. In addition, the variant of object that had optimal characteristics due to the different preferences of investors was indicated. This paper includes analysis and observations on the attempts to unify that part of the building sector, which so far is considered to be personalized, and objects in accordance with the corresponding idea are designed as "custom-made".
W artykule poruszono tematykę związaną z projektowaniem i wykonawstwem obiektów niskoenergetycznych w warunkach polskich. Na przykładzie projektowanego domu jednorodzinnego, dostosowanego do wymogów Narodowego Funduszu Ochrony Środowiska i Gospodarki Wodnej (standard NF40), przedstawiono narzędzia wspomagające podejmowanie decyzji inwestycyjnych przez inwestorów. Wykonana analiza ekonomiczna oraz wielokryterialna metodą AHP pozwoliła odpowiedzieć na pytanie, czy warto ponosić większe koszty inwestycyjne na dostosowanie do standardów energooszczędnych obiektów pierwotnie spełniających jedynie w minimalny sposób polskie wymogi dotyczące energochłonności. Ponadto wskazano wariant projektowanego obiektu, który wykazywał cechy optymalne ze względu na różne preferencje inwestorów. Praca zawiera analizy i spostrzeżenia dotyczące prób unifikacji tej części budownictwa, która do tej pory uznawana jest za indywidualną, a obiekty zgodne z odpowiadającą mu ideą projektowane są "na miarę".
Źródło:
Archives of Civil Engineering; 2016, 62, 4/I; 119-138
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies