Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "electrochemical impedance spectroscopy" wg kryterium: Temat


Tytuł:
Ethanol oxidation reaction at Pd-modified nickel foam obtained by PVD method
Autorzy:
Mikołajczyk, T.
Turemko, M.
Pierożyński, B.
Powiązania:
https://bibliotekanauki.pl/articles/949482.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
PVD
nickel foam
electrochemical impedance spectroscopy
Opis:
In this study, palladium-modified nickel foam substrate was applied to examine ethanol oxidation reaction (EOR) in 0.1 M NaOH supporting solution. An EOR catalyst was prepared by physical vapour deposition (PVD) of palladium onto Ni foam material. Temperature-dependent kinetics of the EOR were studied over the temperature range: 20-60°C by means of a.c. impedance spectroscopy and cyclic voltammetry techniques. Deposition of a noble metal additive was clearly exposed through scanning electron microscopy: SEM/EDX-supported analysis. Most importantly, this work investigated the effect of pre-deposited fullerene on nickel foam, on the catalytic (EOR) properties of such-produced Ni foam/Pd composite material.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 2; 47-50
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Fast Method of Identifying Rechargeable Batteries Condition and Defects
Autorzy:
Kuliński, K.
Nowrot, A.
Powiązania:
https://bibliotekanauki.pl/articles/2064967.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
lithium-ion batteries
electrochemical impedance spectroscopy
Opis:
The paper presents fast method of identifying industrial and general use rechargeable batteries condition and defects exemplary lithium-ion cells. The proposed method is based on measuring a internal battery electrical impedance for selected frequency points and the next the results are compare with reference characteristics. Diagnostic process is performed for a few minutes when the battery is charging or discharging. So far used, the most popular methods require controlled charging and discharging cells to determine approximately of their capacity and need a long time of the diagnostic process (about few hours to over a dozen hours). The new method allows the dramatically reduction of measurement time and in effect reduces financial work costs of service. The paper shows a various setup systems with commonly use RLC impedance bridges were used in the research. The analysis of measurements allowed to determine the specific spectral function, which indicates rechargeable battery condition. Moreover, it is also possible to apply the obtain method to another electrochemical cell type.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2018, 1, 1; 301--305
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Cold Rolling on Electrochemical Impedance Behavior of New β-Type Ti-6Mo-6V-5Cr-3Sn-2.5Zr Alloy
Autorzy:
Song, Hocheol
Zakiyuddin, Ahmad
Kim, Sinhye
Lee, Kwangmin
Powiązania:
https://bibliotekanauki.pl/articles/351262.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beta-titanium alloy
electrochemical impedance spectroscopy
potentiodynamic polarization
Opis:
In this study, the corrosion properties of Ti-6Mo-6V-5Cr-3Sn-2.5Zr alloy were investigated as a function of the cold rolling ratio and annealing temperature. The annealing treatment was carried out at temperature of 680°C, 730°C, and 780°C. The highest corrosion potential observed in the specimen with a 10% rolling ratio was 179 mV, which was more positive than that of the nonrolled specimen (–0.214 VSSC). The lowest corrosion current density (1.30×10-8 A/cm2) was observed in the non-rolled specimen which suggested that the integrity of its passive oxide layer was superior to that of the cold-rolled specimens. Time-dependent EIS evaluation revealed that the consistency of the passive oxide layer was highly affected by the subjected rolling ratio over time.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 2; 487-490
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of electrooxidation of phenol on polycrystalline platinum
Autorzy:
Pierożyński, B.
Piotrowska, G.
Mikołajczyk, T.
Powiązania:
https://bibliotekanauki.pl/articles/779691.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Phenol electrooxidation
PhER
polycrystalline Pt
electrochemical impedance spectroscopy
Opis:
This work reports on kinetics of phenol electrooxidation reaction (PhER), examined at polycrystalline Pt electrode in 0.5 M H2SO4 and 0.1 M NaOH supporting solutions. Important aspects of PhER kinetics were analysed based on potential-dependent, a.c. impedance-derived values of charge-transfer resistance and capacitance parameters. Special attention was also given to the influence of supporting electrolyte ions on the process of phenol oxidation (pH dependence of the PhER), in relation to an important role of anion adsorption on the Pt catalyst surface.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 2; 126-130
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of EIS technique to investigate the adsorption of different types of depressants on pyrite
Autorzy:
Ertekin, Zeliha
Pekmez, Kadir
Kappes, Ronel
Ekmekçi, Zafir
Powiązania:
https://bibliotekanauki.pl/articles/1447279.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pyrite
depressants
collector
mineral electrodes
electrochemical impedance spectroscopy
Opis:
Batch scale flotation tests are generally performed for testing effects of flotation reagents on flotation performance. This method becomes costly and time-consuming for testing a number of flotation reagents such as collectors, depressants and activators. Therefore, developing alternative lowcost, fast and sensitive methods have recently been the subject of intense research to obtain a better flotation performance. The electrochemical techniques have been used for the surface characterization of sulfide minerals. Electrochemical Impedance Spectroscopy (EIS) is one of these techniques that can provide significant information related to surface characteristics, reagent adsorption on the sulfide minerals. In this study, EIS was used as an alternative technique to the conventional batch scale flotation tests for pre-screening of various flotation reagents using two pyrite samples containing different contents of Au and As. Sodium cyanide (NaCN), sodium metabisulfite (SMBS), and a polymeric depressant Aero 7261A were tested as depressants for two pyrite samples (Sample A from a Carlintrend ore and Sample B from a Sulfidic ore from South America) having different electrochemical characteristics. EIS results showed that the effects of the sequence of addition of collector (Potassium amyl xanthate - KAX) and depressant were also investigated to evaluate the stability of depressant and collector compounds formed at the surface. The sequence of addition of the collector and depressants was significant for Sample A but not for Sample B. The results show that EIS can be used as an effective tool for testing the performance of various flotation reagents and their mixtures on sulfide minerals.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 3; 112-126
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective Corrosion of Al2Cu Intermetallic Phase in Orthophosphoric Acid Aqueous Solutions
Autorzy:
Kwolek, P.
Gradzik, A.
Szeliga, D.
Kościelniak, B.
Powiązania:
https://bibliotekanauki.pl/articles/351947.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
intermetallic phase
selective corrosion
orthophosphoric acid
electrochemical impedance spectroscopy
Opis:
Al2Cu phase has been obtained by melting pure metals in the electric arc furnace. It has been found that the intermetallic phase undergoes selective corrosion in the H3PO4 aqueous solutions. Aluminium is dissolved, the surface becomes porous and enriched with copper. The corrosion rate equals to 371 ±17 g∙m-2∙day-1 (aerated solution) and 284 ± 9 g∙m-2∙day-1 (deaerated solution). The surface of Al2Cu phase after selective corrosion was characterised by using electrochemical impedance spectroscopy. It was found that the surface area of the specimens increases with temperature due to higher corrosion rate and is between 2137 and 3896 cm2.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1223-1229
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
EIS research of AW - 7020 alloy joints welded by MIG
Autorzy:
Dudzik, K.
Charchalis, A.
Powiązania:
https://bibliotekanauki.pl/articles/248097.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
electrochemical impedance spectroscopy (EIS)
aluminium alloys
MIG welding
corrosion
Opis:
The results of corrosion properties research of aluminum alloy AW 7020 (AlZn5Mg1) welded by MIG were presented. In the article the parameters for MIG welding of sheets made of AlZn5Mg1 (7020) alloy was presented. Metallographic analysis of bonds showed a proper structural construction MIG welded 7020 aluminum alloy. EIS measurement was performed in three electrode system in artificial seawater (3.5% NaCl). Impedance studies were carried out at the corrosion potential. Changed voltage signal amplitude in the range plus or minus 10 mV and frequency range of changes was as follows: 100 kHz - 0.1 Hz. Atlas 0531 EU and IA potentiostat was used for studies. Model in the form of an electrical equivalent circuit replacement was chosen for the test object. The results of electrochemical impedance spectroscopy are presented graphically in the Nyquist charts matched with the theoretical curve to them and in the form of parameters characterizing the corrosion process. Obtained results were statistically analyzed. Much better resistance to electrochemical corrosion was found for the native material then joint welded by MIG of 7020 aluminum alloy. The most important parameter - charge transfer resistance value of a double layer Rct for sample of native material is higher than for the sample welded by MIG. Original value is received results of the corrosion properties of MIG welded AlZn5Mg1 alloy compared with the native material.
Źródło:
Journal of KONES; 2012, 19, 1; 83-88
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosive properties distribution in AW-7020 alloy joints welded by FSW
Autorzy:
Dudzik, K.
Powiązania:
https://bibliotekanauki.pl/articles/247352.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
electrochemical impedance spectroscopy
EIS
friction stir welding
FSW
welding
corrosion
Opis:
The results of corrosion properties research of aluminum alloy AW 7020 (AlZn5Mg1) welded by Friction Stir Welding were presented. In the article the parameters for friction stir welding of sheets made of AlZn5Mg1 (7020) alloy were presented. Corrosion tests were performed on the surface of the FSW joined sheets depending on the distance from the centre of the weld. EIS measurement was performed in three-electrode system in an artificial seawater (3.5% NaCl). Impedance studies were carried out at the corrosion potential. Changed voltage signal amplitude in the range ± 10 mV and frequency range of changes was as follows: 100 kHz - 0.1 Hz. Atlas 0531 EU & IA potentiostat was used for studies. Model in the form of an electrical equivalent circuit replacement was chosen for the test object. The results of electrochemical impedance spectroscopy are presented graphically in the Nyquist charts matched with the theoretical curve to them and in the form of parameters characterizing the corrosion process. Obtained results were statistically analysed. Better resistance to electrochemical corrosion was found for the native material then joint welded by FSW of 7020 aluminum alloy. Worse corrosion properties were observed in the advancing side of the weld than in the retreating side of the weld. Original value are received results of the corrosion properties distribution of FSW welded AW-7020 aluminium alloy.
Źródło:
Journal of KONES; 2014, 21, 4; 79-85
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Loading Effect of Ag Nanoparticles on Photocatalytic Activity of TiO2 Nanorod Arrays Prepared by Hydrothermal Method
Autorzy:
Lee, Kwangmin
Yoo, Daeheung
Zakiyuddin, Ahmad
Powiązania:
https://bibliotekanauki.pl/articles/2049271.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
TiO2 nanorods
Ag nanoparticles
hydrothermal
Electrochemical impedance spectroscopy
UV-Vis spectroscopy
Opis:
Rutile-TiO2 nanorod thin films were formed on Ti disks via alkali treatment in NaOH solutions followed by heat treatment at 700°C. Ag nanoparticles were loaded on nanorods using a photo-reduction method to improve the photocatalytic properties of the prepared specimen. The surface characterization and the photo-electrochemical properties of the Ag-loaded TiO2 nanorods were investigated using a field-emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS), UV-Vis spectroscopy and electrochemical impedance spectroscopy (EIS). The TiO2 nanorods obtained after the heat treatment were 80 to 180 nm thick and 1 μm long. The thickness of the nanorods increased with the NaOH concentration. The UV-Vis spectra exhibit a shift in the absorption edge of the Ag-loaded TiO2 to the visible light range and further narrowing of the bandgap. The decrease in the size of the capacitive loops in the EIS spectra showed that the Ag loading effectively improved the photocatalytic activity of the TiO2 nanorods.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 751-754
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physicochemical analysis of phosphatidylcholine-ceramide system in bilayer lipid membranes
Autorzy:
Naumowicz, Monika
Petelska, Aneta
Figaszewski, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/1040678.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
equilibrium
ceramide
complex formation
electrochemical impedance spectroscopy
phosphatidylcholine
bilayer lipid membrane
Opis:
Electrochemical impedance spectroscopy was used for the study of two-component lipid membranes. Phosphatidylcholine and ceramide were to be investigated, since they play an important biochemical role in cell membranes. The research on biolipid interaction was focused on quantitative description of processes that take part in a bilayer. Assumed models of interaction between amphiphilic molecules and the equilibria that take place there were described by mathematical equations for the studied system. The possibility of complex formation for two-component system forming bilayers was assumed that could explain the deviation from additivity rule. Equilibria were described by mathematical equations that were further verified experimentally. The determined values of parameters (stability constant, molecular area of complex, capacitance and conductance of the lipid membranes formed from molecules and complexes) were used for calculation of model curves. The comparison of model curves and experimental points verified the assumed model.
Źródło:
Acta Biochimica Polonica; 2008, 55, 4; 721-730
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies