Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "driving tests" wg kryterium: Temat


Tytuł:
Investigation of the motion of motor vehicles in Polish conditions
Badania ruchu pojazdów samochodowych w warunkach polskich
Autorzy:
Chłopek, Z.
Lasocki, J.
Wójcik, P.
Biedrzycki, J.
Powiązania:
https://bibliotekanauki.pl/articles/263622.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
motor vehicles
driving tests
samochody
testy jezdne
Opis:
In dynamic conditions, the functional properties of internal combustion (IC) engines in steady thermal state depend on time histories of the quantities that characterize the intensity of engine operation. For the automotive engine, the most important process that determines the engine operation is the vehicle speed process. To evaluate the impact of the conditions of operation of motor vehicles on the properties of their IC engines, the investigation of passenger car speed processes in the conditions of typical vehicle use was taken up. The recorded speed vs. time curves were treated as realizations of stochastic processes and basic characteristics of the processes were determined. The vehicle motion was modelled as motion in the street congestion, urban, extra-urban, and high-speed traffic conditions. Based on empirical tests and analyses carried out, sets of passenger car speed vs. time curves have been proposed as realizations of model processes representing the vehicle motion in the conditions under consideration.
Właściwości użytkowe siników spalinowych zależą w warunkach dynamicznych w ustabilizowanych stanie cieplnym silnika od przebiegów wielkości charakteryzujących intensywność pracy silnika. W silniku samochodowym najważniejszym procesem determinującym jego pracę jest prędkość pojazdu. W celu oceny wpływu warunków użytkowaniu pojazdów samochodowych na właściwości silników spalinowych zajęto się badaniem procesów prędkości samochodów osobowych w warunkach ich typowego użytkowania. Zarejestrowane przebiegi prędkości potraktowano jako realizacje procesów stochastycznych i wyznaczono dla nich podstawowe charakterystyki. Ruch pojazdów modelowano jako ruch w zatorach ulicznych (kongestie), w miastach, poza miastami i na trasach szybkiego ruchu. Na podstawie przeprowadzonych badań empirycznych i analiz zaproponowano zbiory przebiegów prędkości samochodu osobowego, stanowiące realizacje procesów modelujących ruch pojazdów w rozpatrywanych warunkach.
Źródło:
Archiwum Motoryzacji; 2013, 2; 3-20, 119-136
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected remarks about RDE test
Autorzy:
Merkisz, J.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133698.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
real driving tests
emisja spalin
samochody osobowe
Opis:
New test procedures for determining exhaust emission from passenger vehicles will be introduced in 2017. For several years, the European Commission has been developing new procedures, which aim is to perform tests in road conditions. The purpose is to determine the real values of emissions, which are not always reflected by the level of emissions obtained in the laboratory. Proper and accurate procedures for determining emissions in real traffic conditions (RDE – Real Driving Emission) have not yet been approved (as opposed to Heavy Duty Vehicles for which such conditions already exist), but there are proposals that are currently being analyzed by major research centers in Europe. There are many differences between those proposals such as determining road emission or research methodology related to emission measurement of hydrocarbons. The work compares the results of emissions measured in road tests using the latest legislative proposals related to passenger cars. The results are shown in relation to the used measurement method: classic method of determining exhaust emission; uses all measurement data determining the mass of harmful compounds and distance travelled during the test; method of averaging the measuring windows (MAW – moving average windows), also in the literature called EMROAD method, which determines the measurement windows (on the basis of carbon dioxide emissions from the WLTC test) and on its basis determines the road emission in RDE test; generalized method of instantaneous power (Power Binning), known in the literature as CLEAR – Classification of Emissions from Automobiles in Real driving, determines road emissions on the basis of generalized instantaneous power during the RDE test.
Źródło:
Combustion Engines; 2016, 55, 3; 54-61
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reproducibility and repeatability of hybrid propulsion systems operation indexes in test conditions
Odtwarzalność i powtarzalność wskaźników pracy układu napędu hybrydowego w warunkach badawczych
Autorzy:
Pielecha, I.
Cieślik, W.
Siwoń, M.
Powiązania:
https://bibliotekanauki.pl/articles/132977.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
driving tests
hybrid drive system
tests repeatability
operational indexes
testy jezdne
układ napędu hybrydowego
powtarzalność badań
wskaźniki pracy
Opis:
The analysis of driving tests repeatability is an important issue in terms of measuring the parameters determining operating conditions of the engine and the vehicle. Most of the typical tests apply to powertrains systems or entire vehicles. This paper undertakes the issue of practical evaluation of the tests repeatability on test stands equipped with a hybrid drive system. A high reproducibility of driving tests using only the accelerator pedal settings was obtained. Also a significant battery charge level influence on the repeatability of selected parameters of the hybrid drive system in driving tests was proved. Such dependence on the level of battery charge was demonstrated for the vehicle speed, combustion engine speed and the degree of the combustion engine utilization, affecting at the same time the operating conditions of the electric motor.
Analiza powtarzalności testów jezdnych jest zagadnieniem istotnym w aspekcie pomiarów wielkości określających warunki pracy silnika i pojazdu. Większość typowych testów dotyczy badań silników lub pojazdów. W pracy podjęto tematykę praktycznej oceny powtarzalności testów badawczych na stanowisku wyposażonym w układ napędu hybrydowego. Uzyskano dużą odtwarzalność testów jezdnych przy wykorzystaniu jedynie nastaw pedału przyspieszenia. Wykazano duży wpływ stopnia naładowania akumulatora wysokonapięciowego na powtarzalność wybranych parametrów układu napędu hybrydowego w testach jezdnych. Zależność od stopnia naładowania akumulatora wykazują: prędkość pojazdu, prędkość obrotowa silnika spalinowego oraz stopień jego wykorzystania, co jednocześnie wpływa na warunki pracy silnika elektrycznego.
Źródło:
Combustion Engines; 2016, 55, 2; 21-32
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative examination of pollutant emission from an automotive internal combustion engine with the use of vehicle driving tests
Badania porównawcze emisji zanieczyszczeń z samochodowego silnika spalinowego z zastosowaniem testów jezdnych
Autorzy:
Chłopek, Z.
Biedrzycki, J.
Lasocki, J.
Wójcik, P.
Powiązania:
https://bibliotekanauki.pl/articles/134234.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engines
pollutant emission
vehicle driving tests
stochastic processes
silniki spalinowe
emisja zanieczyszczeń
testy jezdne
procesy stochastyczne
Opis:
The pollutant emission from automotive internal combustion (IC) engines is highly susceptible to engine operation states determined by vehicle velocity processes. The article presents results of comparative examinations of specific distance pollutant emission characteristics determined from various vehicle driving tests. The specific distance pollutant emission was determined using vehicle type-approval and special tests as well as tests developed at the Automotive Industry Institute (PIMOT), treated as realizations of the stochastic process of vehicle velocity. The research results confirmed high susceptibility of the IC engine pollutant emission to the engine operation states, which endorses the usefulness of treating the conditions of operation of automotive engines as stochastic processes.
Emisja zanieczyszczeń z samochodowych silników spalinowych jest bardzo wrażliwa na stany pracy silników zdeterminowane procesami prędkości samochodów. W niniejszej pracy przedstawiono wyniki badań porównawczych charakterystyk emisji drogowej zanieczyszczeń w różnych testach jezdnych. Do wyznaczania emisji drogowej zanieczyszczeń wykorzystano testy stosowane w procedurach homologacyjnych i testy specjalne oraz opracowane w Przemysłowym Instytucie Motoryzacji, traktowane jako realizacje procesu stochastycznego prędkości samochodu. Wyniki badań potwierdziły znaczną wrażliwość emisji zanieczyszczeń na stany pracy silnika spalinowego, co potwierdza celowość traktowania warunków pracy silników samochodowych jako procesów stochastycznych.
Źródło:
Combustion Engines; 2016, 55, 1; 56-64
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation analysis of electric vehicles energy consumption in driving tests
Symulacyjna analiza energochłonności pojazdów elektrycznych w testach badawczych
Autorzy:
Pielecha, Ireneusz
Pielecha, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/300650.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
automotive vehicles
electric drive
high voltage batteries
energy flow
driving tests
pojazdy samochodowe
napęd elektryczny
akumulator wysokonapięciowy
przepływ energii
testy jezdne
Opis:
The assessment of energy flow through electric vehicle systems makes estimating their energy consumption possible. The article presents analyzes of the energy consumption of electric vehicles in selected driving tests (NEDC, WLTC and in real traffic conditions – RDC test) in relation to the vehicles different curb weight. The use of electric motors was also analyzed, providing their operating ranges, data of the energy flow in batteries and the change in their charge level. Simulation tests and analyzes were carried out using the AVL Cruise software. It was found that despite similar vehicle energy consumption values in NEDC and RDC testing, there are significant differences in energy flow in vehicle subsystems. The changes in the battery charge level per 100 km of test drive are similar in both the WLTC and RDC tests (6% difference); for the NEDC test, this difference is the greatest at 25% (compared to the previous tests). The energy consumption of electric vehicles depends significantly on the test itself; the values obtained in the tests are in the ranges of 10.1–13.5 kWh/100 km (NEDC test); 13–15 kWh/100 km (WLTC test) and 12.5–16.2 kWh/100 km in the RDC test. The energy consumption values in the NEDC and WLTC tests, compared to the RDC test, are approximately 20% and 10% lower, respectively. Increasing the vehicle mass increases the energy consumption (increasing the vehicle mass by 100 kg was found to increase the energy consumption by 0.34 kWh/100 km).
Ocena przepływu energii przez układy pojazdów elektrycznych umożliwia oszacowanie ich energochłonności. W artykule przedstawiono analizy dotyczące zużycia energii pojazdów elektrycznych w wybranych testach jezdnych (NEDC, WLTC oraz w rzeczywistych warunkach ruchu – test RDC) w odniesieniu do zróżnicowanej masy pojazdów. Analizie poddano również wykorzystanie silników elektrycznych, przedstawiając mapy ich pracy, wielkości przepływu energii w akumulatorach oraz stopień zmiany ich naładowania. Badania i analizy symulacyjne wykonano z wykorzystaniem oprogramowania AVL Cruise. Stwierdzono, że mimo podobnych wartości energochłonności pojazdów w testach badawczych NEDC oraz RDC, to występują znaczące różnice przepływu energii w układach akumulacji pojazdów. Zmiany stopnia naładowania akumulatora odniesione do 100 km testu są zbliżone w testach WLTC oraz RDC (różnica 6%); dla testu NEDC różnica ta wynosi maksymalnie 25% (w odniesieniu do poprzednich testów). Energochłonność pojazdów elektrycznych jest silnie zależne od testu badawczego; wartości uzyskane w testach kształtują się na poziomie 10,1–13,5 kWh/100 km (test NEDC); 13–15 kWh/100 km (test WLTC) oraz 12,5–16,2 kWh/100 km w teście RDC. Wartości energochłonności w testach NEDC oraz WLTC są odpowiednio mniejsze o około 20% i 10% w odniesieniu do testu RDC. Zwiększenie masy pojazdu zwiększa zużycie energii (zwiększenie o 100 kg masy pojazdu zwiększa zużycie energii o 0,34 kWh/100 km).
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 1; 130-137
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of pollutant emissions from a motor vehicle engine in tests simulating real vehicle use in road traffic conditions
Badania emisji zanieczyszczeń z silnika samochodu w testach symulujących rzeczywiste użytkowanie trakcyjne
Autorzy:
Chłopek, Z.
Biedrzycki, J.
Lasocki, J.
Wójcik, P.
Powiązania:
https://bibliotekanauki.pl/articles/133208.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engines
pollutant emissions
vehicle driving tests
simulation of motor vehicle motion conditions
silniki spalinowe
emisja zanieczyszczeń
testy jezdne
symulacja warunków ruchu samochodów
Opis:
Vehicle driving tests worked out by the authors and simulating the typical road operation of a motor vehicle have been described. The tests have been developed on the grounds of analyses of vehicle speed processes recorded during empirical tests, which were carried out in road traffic conditions. In the vehicle motion models adopted, the conditions of vehicle operation in congestion, urban, extra–urban, and high–speed traffic were separately considered. Pollutant emission test results obtained from the driving test procedures proposed have been presented.
W pracy przedstawiono opracowane przez autorów testy jezdne symulujące typowe użytkowanie trakcyjne samochodu. Opracowano je na podstawie analiz procesów prędkości samochodu uzyskanych w badaniach empirycznych przeprowadzonych w ruchu drogowym. W przyjętych modelach ruchu wyodrębniono warunki użytkowania samochodu w zatorach ulicznych, w miastach, poza miastami i na trasach szybkiego ruchu. Przedstawiono wyniki badań emisji zanieczyszczeń uzyskane z zastosowaniem zaproponowanych testów jezdnych.
Źródło:
Combustion Engines; 2013, 52, 3; 202-207
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of data from on-board data recorders for acceptance tests of avionic driving units
Autorzy:
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/243070.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diagnostics of aircraft engines
qualification tests for avionic driving units
Opis:
The paper explains how information stored in on-board recorders of flight parameters can be used for acceptance tests, also referred to as qualification tests. The disclosed example refers to the An-28 ‘Bryza’ aircraft where an old airscrew was substituted with the new generation Hartzell airscrew of the HC-B5 MP-3D type. The airscrew is an integral part of the driving system for the airscrew propelled aircraft that is provided with the TWD-10B engine. After revamping of the airscrew, the aircraft was named as TWD-10B/PZL-10S. The follow-up investigations were carried out with the aim to find out how much the airscrew substitution affected the alteration of key performance characteristics achieved by the driving unit of the aircraft. The investigations comprised both ground and in-flight tests and have led to determination of the essential characteristics for the engine operation as well as variations of the operational parameters in time. In some cases also so called phase portraits were found out for parameters of the engine operation so that to reflect dynamic properties of the engines. Such investigations are indispensable since the aircrafts are subject to operational limitations and technical conditions that must be mandatory fulfilled due to requirements of flight safety. The paper demonstrates that the data stored in on-board recorders of flight parameters can be really useful for execution of such acceptance (qualification) tests.
Źródło:
Journal of KONES; 2013, 20, 2; 201-206
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of an aircraft engine start-up process on the example of the PZL-130 TC-II „Orlik” training aircraft
Autorzy:
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/244355.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diagnostics of aircraft engines
qualification tests of aircraft driving units
Opis:
The paper discloses the analysis of processes that take place during the start-up operation of the driving unit for the training aircraft of the TZL-130 TC-II Turbo-Orlik type. The aircraft is designed for selective and initial trainings at the Air Force School of “Little Eagles” in Dęblin. The driving unit comprises the PT6A-25C turbo-propeller engine from Pratt & Whitney combined with the four-bladed airscrew from Hatzell. It is specifically mentioned that data for the analysis were sourced from the S2-3a on-board recorder of flight parameters manufactured by the Air Force Institute of Technology (AFIT). The analysis was carried out both during ground and flight tests. The paper briefly outlines general structures and operation principles of typical start-up systems with the focus to their key components. Attention is paid to how important it is to select an appropriate start-up system to match the specific aircraft type and the guideline parameters for selection that should be adhered to are specified. Also there are disclosed the key mathematical relationships that are indispensable to design start-up systems and to find out their basic characteristics. It is emphasized that the start-up operation must be considered as a non-stationary process that lasts from the standstill state of the engine until the moment when the minimum required rpm is reached, sufficient to generate necessary power of the engine. In addition, the attention is paid to the fact that the value of the engine acceleration is crucial to the achievable start-up time that is deemed as one of key parameters for all start-up systems. It is demonstrated that to achieve the required level of acceleration, it is necessary to secure the so called overhead of the engine power which needs constant flow offuel and air into the combustion chamber of the engine. The last part of the paper comprises selected characteristic curves that were obtained from the analysis of the engine start-up processes both on ground and in flight. The final conclusions emphasize that the start-up system for the presented driving unit is really efficient and guarantees correct operation of the engine under any conditions.
Źródło:
Journal of KONES; 2014, 21, 3; 177-189
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of applying the eco-driving rules on the exhaust emissions
Wpływ stosowania zasad eco-drivingu na emisję substancji szkodliwych
Autorzy:
Merkisz, J.
Andrzejewski, M.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133124.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
driving style
eco-driving
road tests
exhaust emissions
styl jazdy
badania drogowe
emisja spalin
Opis:
The article presents the results of measurements of exhaust emissions of commercial vehicle in real traffic conditions. The aim of this study was to initial verification how the driving style affects on the exhaust emissions from vehicle engine and fuel consumption. The determinants were the measurements of the concentration of CO2 and others harmful substances emitted to the atmosphere from the power unit of the tested vehicle. In the measurements a portable exhaust emission analyzer was used (PEMS type).
W artykule zaprezentowano wyniki pomiarów toksyczności spalin samochodu dostawczego w rzeczywistych warunkach ruchu. Celem badań było wstępne zweryfikowanie wpływu stylu jazdy kierowcy na emisję substancji szkodliwych w spalinach oraz zużycie paliwa przez pojazd. Do realizacji celu wykonano pomiary emisji drogowej dwutlenku węgla i innych związków szkodliwych spalin emitowanych do atmosfery przez jednostkę napędową pojazdu. Do pomiarów zawartości poszczególnych zanieczyszczeń gazowych w spalinach wykorzystano mobilną aparaturę do badań toksyczności spalin typu PEMS.
Źródło:
Combustion Engines; 2013, 52, 4; 66-74
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of the driving style on the CO2 emissions from a passenger car
Autorzy:
Merkisz, J.
Andrzejewski, M.
Merkisz-Guranowska, A.
Jacyna-Gołda, I.
Powiązania:
https://bibliotekanauki.pl/articles/242402.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
driving style
road tests
CO2 emissions
fuel consumption
Opis:
With the invention of specialized, portable research equipment, construction of which enabled road tests of vehicles, it has become possible to verify benefits ensuing from application of eco-driving rules outside the laboratory – the test stand measurements. Test of the vehicles’ operation in terms of ecology are essential especially in case of toxicity of exhaust gases in dynamic, transient conditions of engine operation. Despite the attempt to reflect those conditions in dynamic research tests, it is not possible for fully reconstruct real conditions of operation of vehicles of different homologation categories. Due to this fact in recent years, the biggest research potential in automotive industry has been focused right on the road tests of vehicles in real traffic conditions. The article presents the results of measurements of exhaust emissions of passenger car in real traffic conditions. The aim of this study was to initial verification how the driving style influences on the carbon dioxide emissions from vehicle engine and fuel consumption. The determinants were the measurements of the concentration of CO2 emitted to the atmosphere from the power unit of the tested vehicle. In the measurements, a portable exhaust emission analyser was used.
Źródło:
Journal of KONES; 2014, 21, 3; 219-226
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Driving style analysis based on information from the vehicles OBD system
Autorzy:
Lasocki, Jakub
Chłopek, Zdzisław
Godlewski, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/132936.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
driving style
driving patterns
OBD
On-Board Diagnostics
road tests
styl jazdy
wzorzec jazdy
samodiagnostyka pojazdu
badania drogowe
Opis:
The purpose of this study was to analyse the possibility of using information from the On Board Diagnostics (OBD) system of the vehicle to determine the characteristics of the driver's driving style. Available data from the OBD system were considered and the most useful ones were selected for further investigation. Selected zero-dimensional characteristics of vehicle velocity as well as characteristics of relative position of the accelerator pedal were proposed as criteria for the assessment of driving style. The tests were carried out in conditions of real road traffic using a passenger car with a spark-ignition engine. The car was equipped with a device for recording signals from the OBD system. The tests included two drivers traveling on routes in the urban and rural areas. The obtained results were used to analyse the driving style of both drivers separately in the considered traffic conditions. On this basis, conclusions on the suitability of information from the OBD system for the assessment of the driver's driving style were formulated.
Źródło:
Combustion Engines; 2019, 58, 3; 173-181
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of vehicle dynamic parameters on the exhaust emissions in RDE tests
Autorzy:
Pielecha, J.
Kurtyka, K.
Skobiej, K.
Powiązania:
https://bibliotekanauki.pl/articles/133633.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
road tests
Real Driving Emissions
emisja spalin
samochody osobowe
testy drogowe
rzeczywiste warunki emisji
Opis:
The article compares driving test data using the latest legislative proposals applicable to passenger cars with different drives. For this purpose, cars of one type were selected, meeting the same exhaust toxicity standard (Euro 6c) and differing in used internal combustion engines (with spark-ignition, compression-ignition and hybrid drive). Several measurements were performed on the same test route in accordance with the RDE test guidelines, which requires a several of criteria to be met. These criteria include the length of the measuring sections, their overall timeshare and the dynamic characteristics of the drive. A portable emissions measurement system (PEMS) was used to record the engine and vehicle operating parameters and to measure the exhaust emissions during tests. This allowed for the monitoring of parameters such as: load value, engine speed and vehicle velocity. Then the obtained results were analyzed for their compatibility with the RDE procedure requirements. By determining the road emission of individual harmful compounds for all vehicles and the dynamic parameters of drive (relative positive acceleration and product of speed and positive acceleration) in various phases of the road test it was possible to compare them. On this basis, the impact of dynamic conditions of road tests on the obtained results of the road exhaust emission of harmful compounds for passenger cars with various drives was defined.
Źródło:
Combustion Engines; 2018, 57, 4; 26-34
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of driving resistances on energy demand and exhaust emission in motor vehicles
Autorzy:
Jaworski, Artur
Lejda, Kazimierz
Bilski, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/2097633.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
driving resistance
exhaust emission
vehicles
emission tests
energy demand
opór jazdy
emisja spalin
pojazdy
testy emisyjne
zapotrzebowanie energetyczne
Opis:
Among the fundamental factors affecting the emissions of internal combustion engines is the resistance to motion acting on the car. This is an important factor to be taken into account when testing cars in conditions simulated on a chassis dynamometer. The dependence of the driving resistance function on vehicle speed is determined on the basis of various methods, the most frequently used of which is the so-called alternative method specified in procedures for the type approval of motor vehicles with respect to the emission of pollutants in exhaust gases. The values adopted in accordance with the alternative method differ from the actual resistance acting on the car in road conditions. This is one of the reasons why the emission of pollutants and the fuel consumption of an engine in real road conditions differs from the values given by the car manufacturer, including the emission limits specified in the standards. This paper presents an evaluation of the influence of driving resistance on the energy demand and emission of pollutants in the exhaust gases by sample passenger car with SI engine fuelled by petrol and LPG.
Źródło:
Combustion Engines; 2022, 61, 2; 60--67
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Observations from PEMS testing of combustion engines of different applications
Autorzy:
Merkisz, J.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133975.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
road tests
Real Driving Emissions
emisja spalin
samochody osobowe
testy drogowe
rzeczywista emisja cząstek
Opis:
The article compares data obtained in road tests with the latest legislative proposals relating to various applications of internal combustion engines. Passenger car emission tests have been performed several times on the same test route in accordance with the RDE procedure guidelines, for which a dozen or so criteria must be met, including the distance of each of the drive sections, their in the drive time and the dynamic characteristics of the drive. The analysis was also based on a two-dimensional operating density characterization, presented in the vehicle speed-acceleration coordinates. As a result, it was possible to compare dynamic properties, operating time density and, thus, to check the validity of conducted drive tests in terms of their feasibility and emission values. An exhaust emission related comparison of three types of powertrain have been presented: gasoline, diesel and hybrid in the RDE tests. The authors proposed a new form of presenting the road exhaust emissions results in relation to the carbon dioxide emission, referred to as a standardization of the emission results. The exhaust emissions from city buses fitted with different powertrains tested on an actual bus route and in the SORT test were also compared.
Źródło:
Combustion Engines; 2018, 57, 3; 40-55
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Representativeness of emissions of toxic substances in bench tests reflecting the road traffic conditions of a vehicle
Autorzy:
Wiśniowski, Piotr
Gis, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/133793.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
driving cycle
road tests
emission of toxic substances
chassis dynamometer
synthesis of road tests
cykl jezdny
badania drogowe
emisja substancji toksycznych
hamownia podwoziowa
synteza testów jezdnych
Opis:
The results of measurements of exhaust emissions in real road traffic differ significantly from the results of stationary homologation tests. One of the solutions, helpful in determining the actual emission, is the creation of stationary exhaust emission tests simulating the use of the vehicle on the road. The article presents the method of reconstructing the synthetic driving test obtained on the basis of road tests and presents the obtained profile of the speed course. The authors discussed the reasonableness of selecting the emission component determining the correctness of the representativity of the stationary test obtained, which determines the amount of work done by the engine.
Źródło:
Combustion Engines; 2019, 58, 2; 88-90
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies