Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "concrete reinforcement" wg kryterium: Temat


Tytuł:
Analysis of Rheological Properties of Cement Composites Based on Waste Materials
Autorzy:
Zakrzewski, Mateusz
Domski, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/27322945.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
cement composites
creep
steel cord
fiber-reinforcement concrete
long-term study
concrete beams
waste aggregate
waste fibers
crack
Opis:
This report presents the results and analysis of long-term properties of fiber-reinforced cement composite based on waste aggregate. The long-term tests were carried out on the stand proposed by the authors for simultaneously testing three beams with dimensions of 100x200x2900 mm. A total of 8 mixtures of cement composites with aggregate from ceramic waste and waste sand were tested. Three beams were made for each mixture. One without dispersed reinforcement and two with 0.5% and 1.0% fiber reinforcement ratios. As dispersed reinforcement, steel cord and hooked steel fibers were used. The beams were subjected to a four-point bending test. The research was carried out for 1000 days. An optical system was used as an innovative solution in long-term research. Based on the measurements, the creep coefficient in the mid-span of the beams was determined, and the crackings of the beams were analysed. The results obtained using manual measuring devices and the optical system were compared. A good convergence of measurement methods was observed. During the analysis of the results, the coefficients modifying the method for calculating the crack width included in Eurocode 2 were determined.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 159--173
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modern concrete pipes: a review of reinforcement and new technologies
Autorzy:
Abel, Tomasz
Pelczar, Natalia
Powiązania:
https://bibliotekanauki.pl/articles/2037701.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
concrete pipe
underground structure
fibre
reinforcement
Opis:
The paper discusses existing reinforcement, future reinforcement and new technologies for concrete pipes used in the sewage systems. Concrete pipes currently in use and under investigation are reviewed. Structural fibres, as the main reinforcement of concrete pipes, are known as an attractive alternative to the traditional steel bars. Steel, synthetic and basalt fibres have been considered. The latest research and mechanical properties of individual fibres are presented. Advances in fibre-reinforced concrete provide a new basis for the design of more efficient concrete pipes, especially those resistant to biological corrosion and with a longer service life. In the article, future non-corrosive reinforcement due to the reduction of steel reinforcement and corrosion protection linings has been proposed.
Źródło:
Studia Geotechnica et Mechanica; 2021, 43, s1; 548-557
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of behaviour of reinforced concrete elements under eccentric compression
Autorzy:
Majewski, T.
Tejchman, J.
Powiązania:
https://bibliotekanauki.pl/articles/1986991.pdf
Data publikacji:
2002
Wydawca:
Politechnika Gdańska
Tematy:
eccentric compression
concrete
finite element method
reinforced concrete
reinforcement
Opis:
Paper presents results of numerical modelling of behaviour of plane strain reinforced concrete elements under eccentric compression. In the analysis, a finite element method was used based on an elasto-plastic constitutive law by Drucker-Prager with hardening and softening for concrete and an elasto-plastic constitutive law by von Mises for reinforcement. The effects of boundary conditions at the element ends, eccentricity of the compressive load, element slenderness, area of the longitudinal and horizontal reinforcement on the load bearing capacity of elements were studied. The effect of the mesh refinement on the bearing capacity of elements was also analysed. A satisfactory agreement with model tests was achieved.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2002, 6, 3; 411-428
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected Properties of Reinforcing Composite Bars for Concrete Elements Prepared from Waste Polyethylene Terephthalate (PET) Bottles
Autorzy:
Katzer, Jacek
Grzybowski, Paweł
Kobaka, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/27315750.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
concrete
waste
polyethylene terephthalate
PET
reinforcement
Opis:
A concept of producing reinforcing bars for concrete elements from waste polyethylene terephthalate (PET) bottles is presented in the paper. The proposed technology of production harnesses strips of PET cut from bottles and thermal treatment. Finally, a sand-resin coating is applied to the composite bars. Produced bars can be differentiated by utilising different numbers of strips influencing the diameter of a bar. The key mechanical properties of the bars containing 3 to 8 strips were tested during the research program. Maximum loadings and displacements were established. Problems regarding the future application of the bars in question were discussed. Areas of need for further research were pointed out.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 188--197
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flexural behaviour of concrete slabs reinforced with FRP bars in experiments and according to ACI 440.1R guide
Autorzy:
Abramski, M.
Korzeniowski, P.
Tisler, W.
Powiązania:
https://bibliotekanauki.pl/articles/297798.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
basalt fibre
carbon fibre
FRP reinforcement
reinforcement bar
concrete slab
experiment
Opis:
The paper presents research conducted on two concrete slabs reinforced with the carbon composite bars and two other concrete slabs reinforced with basalt composite bars. The carbon bars were plain, while the basalt ones were ribbed. The slabs were experimentally investigated in the flexural state of effort with the concentrated forces applied. The results are compared with the analytical solution proposed in the guide ACI 440.1R-06 of the American Concrete Institute. The calculation procedures in respect of flexure, as well as deflection, as per ACI 440.1R-06, are presented, briefly explained and discussed in the paper. Some suggestions to revise the existing procedures are offered. The authors present and discuss the following results of their experimental investigation: the ultimate capacity of the slabs, their modes of failure, deflections and the strains in reinforcement.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2016, 19(4); 339-357
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical modeling by Monte Carlo method of defects in the structure of fibre composites using as a binder of polybutadiene oligomers
Autorzy:
Figovsky, O.
Potapov, Y.
Panfilov, D.
Kashtanov, S.
Yudin, E.
Powiązania:
https://bibliotekanauki.pl/articles/412183.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Rubber concrete (rubcon)
Dispersed reinforcement
Metal fibre
Opis:
Production of materials with low content of structural defects. Application of Monte Carlo method to quantify fiber intersections in the rubcon structure with account of specified sizes of samples. The article presents quantity-content curves for a number of areas with the dimensions smaller than the diameter of the permissible inhomogeneity against fibreboard percentage. Analyzed quantity-content curves for a number of areas with the dimensions smaller than the diameter of the permissible inhomogeneity against fibreboard percentage and proven influence of stress concentrators on material strength.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2015, 40; 81-87
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFGFRPT piles with a circular cross-section and their application in offshore structures
Autorzy:
Mieloszyk, Eligiusz
Abramski, Marcin
Milewska, Anita
Powiązania:
https://bibliotekanauki.pl/articles/259742.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
concrete-composite piles
composite reinforcement
beam angle
hybrid piles
Opis:
The possibilities of using concrete piles in a polymer composite reinforced with glass fibres in offshore facilities were shown. Laboratory tests of CFGFRPT type piles compressed axially and in eccentric compression for the analysis of CFGFRPT piles were used. Methods of analysis of dynamic systems for mathematical modelling of the displacement of the hammer in the pile driving process were applied. The possibilities of combining CFGFRPT piles, including the creation of hybrid piles were also presented. For example, concrete piles can be combined with concrete piles in a polymer composite reinforced with glass fibres with different fibre beam angles. The possibilities of using such hybrid piles in offshore facilities were indicated.
Źródło:
Polish Maritime Research; 2019, 3; 127-137
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tests of selected elements of building components in the light of compulsory requirements
Autorzy:
Szweda, Stanisław
Wojtaszczyk, Marek
Krenicky, Tibor
Powiązania:
https://bibliotekanauki.pl/articles/27324326.pdf
Data publikacji:
2022
Wydawca:
Instytut Techniki Górniczej KOMAG
Tematy:
steel reinforcement bars
strength tests
composite reinforcement bars
pullout test of bars
bar adhesion test to concrete
Opis:
A procedure of standard strength tests of reinforcement bars conducted at present at the ITG KOMAG is discussed. Taking advantage of the bibliographic review, concerning tests of reinforced concrete with steel reinforcement bars, a possibility of using the KOMAG testing infrastructure to broaden the scope of tests of reinforcement bars was analyzed. Due to a more and more common use of composite bars for reinforcing and strengthening concrete structures, the methods of testing their strength properties are discussed. The conditions enabling to conduct strength tests of composite reinforced concrete bars at the ITG KOMAG are determined.
Źródło:
Mining Machines; 2022, 40, 3; 130--140
2719-3306
Pojawia się w:
Mining Machines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The attainment of equal durability of longitudinal reinforcements in ferro-concrete rod constructions at the stage of project construction
Ocena trwałości zbrojenia przy odkształceniu podłużnym w żelbetowych elementach konstrukcyjnych na etapie projektowania konstrukcji
Autorzy:
Bazhenov, Y. M.
Yerofeev, V. T.
Novichkov, P. I.
Powiązania:
https://bibliotekanauki.pl/articles/256945.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
reinforcement
longitudinal strain
ferro-concrete rod
zbrojenie betonu
odkształcenie podłużne
elementy żelbetowe
Opis:
In the given work, methods of mass transfer theory are used to solve problems of the reaction grout propagations in ferroconcrete rectangular rod cross-section elements and to suggest, on this basis, an original constructive solution for reinforcement cross-sections accounting for the equal reinforcement durability.
W artykule przedstawiono wykorzystanie metod teorii przenikania masy do rozwiązywania problemów odkształcenia podłużnego w żelbetowych prętach o przekroju prostokątnym. Opracowano oryginalne rozwiązania do obliczeń zbrojeń betou pozwalające na uzyskiwanie wymaganej trwałości.
Źródło:
Problemy Eksploatacji; 2013, 2; 97-103
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation of deflection of one-layer and two-layer slabs supported on four sides
Raschet progibov odno- i dvukhslojjnykh plit, opertykh po konturu
Autorzy:
Smorkalov, D.
Powiązania:
https://bibliotekanauki.pl/articles/792189.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
slab
deflection
steel fibre
concrete
construction material
reinforcement
experimental research
calculation model
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2014, 14, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strength of previously destroyed reinforced concrete beams restored by impregnation methods
Wytrzymałość wcześniej zniszczonych belek żelbetowych wzmocnionych metodą impregnacji
Autorzy:
Luchko, Y.
Gajda, O.
Nazariewicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/40449.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
building engineering
building element
beam
reinforced concrete beam
reinforcement
impregnation
strength
bending test
Opis:
This paper presents the design of prototypes, methods of testing and analysis of the strength of concrete beams reinforced with rebar connections. To determine the characteristics of strength, deformation and fracture of experimental beams were tested to complete re-fracture. It is shown that it is possible to restore the strength of reinforced concrete beam by 77-90% by treatment with modern injection materials and technologies.
W artykule omówiono konstrukcje oraz metody badań żelbetowych belek wzmocnionych metodą iniekcji żywic epoksydowych. Belki badano na zginanie do wtórnego całkowitego zniszczenia. Udowodniono, że głębokość wnikania (penetracji) w beton żywicy epoksydowej wynosiła około 2-5 mm. Na podstawie przeprowadzonych badań stwierdzono wzrost wytrzymałości o 77-90% poprzednio zniszczonych i ponownie naprawionych medodą iniekcji żywic epoksydowych żelbetowych belek.
Źródło:
Acta Scientiarum Polonorum. Architectura; 2014, 13, 1
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examining the reinforcement of a reinforced concrete industrial chimney
Badanie zbrojenia żelbetowego komina przemysłowego
Autorzy:
Ordon-Beska, Beata
Powiązania:
https://bibliotekanauki.pl/articles/2067723.pdf
Data publikacji:
2019
Wydawca:
Politechnika Częstochowska
Tematy:
reinforced concrete
diagnostic investigation
electromagnetic method
reinforcement
żelbet
badania diagnostyczne
metoda elektromagnetyczna
zbrojenie
Opis:
The article exams the walls of a reinforced concrete chimney with a rectangular cross-section in Huta Częstochowa. A Ferroscan Hilti FS10 was used for the test. An example protocol of the results obtained from the device and several graphical images of the reinforcement signal are presented. Despite significant wall damage, the measurements were carried out with success. An orthogonal reinforcement solution was found. Bars in both directions differ significantly in diameter. Considerable density changes of the reinforcement in the corner zone were recorded in both the vertical and horizontal direction. As a result of the test, considerable carelessness in the reinforcement execution was observed, which manifested in a variety of cover and deviation of the reinforcement direction from the designed one. The conclusions state that a control forging the concrete up to the reinforcement and measuring the diameter of the reinforcement is necessary for the proper testing of the reinforcement using the electromagnetic method.
W artykule przedstawiono badanie zbrojenia ścian komina żelbetowego o przekroju prostokątnym, na terenie Huty Częstochowa. Do badania wykorzystane zostało urządzenie Ferroscan Hilti FS10. Przedstawiono przykładowy protokół analizy wyników uzyskanych z urządzenia i kilka obrazów graficznych sygnału zbrojenia. Mimo znaczących uszkodzeń ścian pomiary udało się przeprowadzić. Stwierdzono ortogonalny układ zbrojenia. Pręty obu kierunków różnią się wyraźnie średnicą. Zarejestrowano również znaczne zagęszczenie zbrojenia w strefie narożnej zarówno w kierunku pionowym jak i poziomym. W wyniku badania stwierdzono znaczną niestaranność wykonania zbrojenia przejawiającą się zmiennością otuliny i nieprawidłowym przebiegiem prętów. We wnioskach stwierdzono, że kontrolna odkrywka zbrojenia jest niezbędna do prawidłowego przeprowadzenia badania zbrojenia metodą elektromagnetyczną.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2019, 25 (175); 174-179
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Predicting changes of the state of a bridge reinforced with concrete superstructures in view of operational changes
Autorzy:
Ovchynnykov, Pavlo
Dubinchyk, Olha
Tiutkin, Oleksii
Kildieiev, Vitalii
Sedin, Volodymyr
Bikus, Kateryna
Powiązania:
https://bibliotekanauki.pl/articles/395920.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
bridge
superstructure
reinforced concrete
reinforcement
concrete creep
cracks
corrosion depth
most
zbrojenia
beton wzmocniony
wzmocnienie
pełzanie betonu
pęknięcia
korozja
Opis:
To solve the problem of predicting the service life of superstructures, this work proposes the basis and methodological developments of creep theory with increasing loads as well as regression analysis of the results of laboratory experiments. The main limitation in terms of reinforcement is corrosion in the concrete cracks, which was determined during laboratory experiments. Based on the results, the approximate analytical dependences concerning reinforcement corrosion depth change over time at a constant value of crack width were selected. The paper substantiates the validity of the analytical dependences as a result of regression analysis; it proposes formulae for determining the corrosion rate of rebars in reinforced concrete superstructures. The obtained analytical dependences allowed for the developing of a process for predicting changes to the state of the superstructure in light of operational changes.
Źródło:
Civil and Environmental Engineering Reports; 2019, 29, 3; 134-152
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of non-autoclaved foam-concrete beams reinforced with bamboo
Autorzy:
Demchyna, B.
Lysiuk, S.
Famulyak, Yu.
Powiązania:
https://bibliotekanauki.pl/articles/378666.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
lateral bending
reinforced concrete beams
lightweight foam-concrete
bamboo reinforcement
gięcie boczne
belka żelbetowa
lekki beton piankowy
wzmocnienie bambusowe
Opis:
Purpose: of this paper presents the experimental results of a study of strength and flexural behaviour of non-autoclaved foam-concrete beams reinforced with bamboo Design/methodology/approach: Six experimental samples of reinforced lightweight foamed concrete beams with hardened density D800 and D1200 with the same bamboo reinforcement were tested on lateral bending. Findings: A low level of anchoring of bamboo reinforcement in foam-concrete beams can provide their premature destruction. Research limitations/implications: Next experiments should be provided for improving the anchoring of bamboo reinforcement such as the bad adhesion between the bamboo and foam-concrete caused premature destruction of experimental samples. Practical implications: Replacement of steel reinforcement on the bamboo one in foamconcrete structures can be economical benefit. Originality/value: Increasing of experimental base leads to developing and creating new building standards in the nearest future.
Źródło:
Archives of Materials Science and Engineering; 2019, 96, 2; 56-62
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the interface reinforcement on static performance of concrete composite T-shaped beams
Wpływ zbrojenia styku na pracę statyczną żelbetowych belek zespolonych o przekroju teowym
Autorzy:
Jabłoński, Łukasz
Halicka, Anna
Powiązania:
https://bibliotekanauki.pl/articles/390693.pdf
Data publikacji:
2020
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
concrete composite beams
interface reinforcement
concrete composite T-shaped beams
żelbetowe belki zespolone
zbrojenie styku
belki zespolone o przekroju teowym
Opis:
The tests results of composite reinforced concrete T-shaped beams with an interface between the web and the flange are presented. The interface in the beams differed in the degree of the adhesion activity and the joining reinforcement ratio. Five series of beams were tested for deflection, displacement of composite parts in relation to each other, strain of main and transverse reinforcement, and crack pattern. The results were compared with the theoretical forces, at which interface cracks and achieves the bearing capacity, calculated in accordance with fib Model Code 2010.
W artykule przedstawiono wyniki badań zbrojonych żelbetowych belek zespolonych o przekroju teowym ze stykiem zlokalizowanym pomiędzy środnikiem a półką. Styk w belkach poszczególnych serii różnił się sposobem kształtowania adhezji i stopniem zbrojenia zszywającego. Przebadano pięć serii belek pod kątem ugięcia, przemieszczenia części zespolonych względem siebie, odkształcenia zbrojenia głównego i poprzecznego oraz morfologii zarysowania. Wyniki porównano z siłami teoretycznymi, przy których styk uległ zarysowaniu i osiągnął nośność, obliczonymi zgodnie pre-normą fib Model Code 2010.
Źródło:
Budownictwo i Architektura; 2020, 19, 3; 63-76
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies